Deckel Maho Dmu 80 P nakup rabljenega (354)

Stanje: rabljeno, Leto izdelave: 2002, Tehnične podrobnosti: X-hod: 630 mm Y-hod: 560 mm Z-hod: 560 mm Teža stroja pribl.: 6,5 t Število osi: 5 kos Hitrost vretena: 18.000 min⁻¹ Število orodnih mest v magazinu: 24 Bedpfsxn Swnjx Ag Tjld Vpenjalni konus: SK 40 5-osni stroj Rotacijska miza B-os

Stanje: potreben popravila (rabljeno), Leto izdelave: 2002, obratovalne ure: 54.981 h, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 1114 000273 3, potovalna razdalja osi X: 1.080 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 15 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 15 m/min, proizvajalec krmilnikov: Haidenhain, model krmilnika: HEIDENHAIN TNC 530, skupna višina: 2.500 mm, skupna dolžina: 6.200 mm, skupna širina: 3.802 mm, širina mize: 795 mm, dolžina mize: 1.500 mm, obremenitev mize: 900 kg, skupna masa: 9.500 kg, delovne ure vretena: 14.170 h, nos vretena: SK40, število mest v zalogovniku orodij: 32, teža orodja: 8.000 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control: Heidenhain TNC 530 with DMG-specific MillPlus IT user interface Spindle taper: SK40 Operating hours: 54,981 h Travel paths: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: Bjdpsxxamxsfx Ag Tsld NC rotary table (Nikken) Large NC rotary table Tailstock Handwheel Inspection An inspection under power is possible at any time by appointment. Condition: Used condition appropriate for age and previous usage Known defects: Ball screw of X-axis worn / overhaul required Y-axis probably cable or motor damage Recent repairs: 2017 – Handwheel retrofit kit 2022 – Replacement of the chip conveyor auger 2024 – New cylinder/linear guide for the tool magazine 2024 – New screen Other defects cannot be ruled out. Important note / disclaimer The machine is explicitly sold as defective, without warranty, without guarantee, and with the exclusion of any liability for material defects. All technical details were provided to the best of our knowledge but are non-binding. No liability is assumed for completeness, correctness, or up-to-dateness of the information. The sale is made as inspected and excludes any subsequent negotiations.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Krmilna enota Znamka: HEIDENHAIN Blsdsx D Dukepfx Ag Tsd Model: ni na voljo Premiki X-os pomik: 500 mm Y-os pomik: 400 mm Z-os pomik: 400 mm Stroj DECKEL MAHO DMU 50 T je bil izdelan leta 2002. Opremljen je z vretenom SK40 DIN69871, dimenzijo mize 700x500 mm in največjimi obrati 9000. Idealen za vsestranska obdelovalna dela. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Splošni podatki Širina: 3500 mm Globina: 3000 mm Višina: 2500 mm Glavni pogon Območje hitrosti vretena: 18.000 vrt/min Vpenjalni stožec: HSK-63A Število osi: 4 Pomiki Pomik X-os: 630 mm Hitri pomik X-os: 26.000 mm/min Pomik Y-os: 560 mm Hitri pomik Y-os: 26.000 mm/min Pomik Z-os: 560 mm Hitri pomik Z-os: 20.000 mm/min Bedpex D I Ibsfx Ag Told Miza Nosilnost mize: 400 kg Orodja Število orodij v izmenjevalcu: 20 To štiriosno vertikalno obdelovalno središče DECKEL MAHO DMU-60T je bilo izdelano leta 2005. Ponaša se z robustno izvedbo in hodi osi X, Y, Z v dolžini 630, 560 in 560 mm. Opremljen je z visoko hitrostnim vretenom do 18.000 vrt/min in vpenjalnim stožcem HSK-63A, kar zagotavlja natančnost in učinkovitost. Stroj ima CNC krmilje Heidenhain MillPlus ter zalogovnik za 20 orodij. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra DECKEL MAHO DMU-60T. Za dodatne informacije nas kontaktirajte. Vrsta aplikacije Rezkanje

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 73.090 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 350 mm, hitro pomikanje X-os: 80 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 20 m/min, nazivna (navidezna) moč: 21 kVA, proizvajalec krmilnikov: Siemens, model krmilnika: 840D powerline, širina mize: 380 mm, dolžina mize: 500 mm, skupna masa: 6.500 kg, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 24.649 h, število mest v zalogovniku orodij: 30, vhodna napetost: 400 V, število osi: 5, Oprema: transportni trak za ostružke, For sale is a machining center from the manufacturer Deckel Maho DMU 50, in well-maintained, technically flawless condition. The machine has been regularly serviced and is in very good condition both visually and technically. It is fully functional, tested, and ready for immediate use. Additional equipment: - Paper belt filter - Coolant system (KSS-Anlage) With our all-inclusive package, we personally handle the entire service for you upon request – from delivery to commissioning of your new machine. This includes unloading, positioning, and alignment of the machining center. Afterwards, our experienced service technicians carry out professional commissioning, perform all necessary functional checks, and ensure that your machine runs reliably and accurately. Furthermore, we offer customized training for your employees to ensure you can utilize the machine optimally from day one. Even after installation, we are happy to support you – whether for maintenance, technical questions, or future upgrades. With our all-inclusive package, you don't need to worry about anything – we make sure everything runs smoothly so you can focus entirely on your production. Optionally, you can purchase extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction systems, to make your production even more efficient and clean. Our service promise: We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians, specializing in Mazak machines as well as other manufacturers. We place great value on personalized support and are always available to assist you after your purchase. In addition, you are welcome to inspect and test the machine under power at our factory at any time. You are cordially invited to visit us and see the machine’s condition and performance for yourself. With us, you are in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG Bledpfx Agsxwtp Ro Tjd All information without guarantee.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Tehnične podrobnosti: Pomik x: 1.250 mm Pomik y: 710 mm Pomik z: 710 mm Površina mize: 1500 x 800 mm Obremenitev mize: 800 kg Hitrost vrtenja: 12.000 1/min Glavni motor: 15 / 10 kW Krmiljenje: iTNC HEIDENHAIN Vpenjalni stožec: SK 40 Menjalec orodij: 40 pozicij Priključna moč: 44 kVA Teža stroja pribl.: 10 t Bodoxq S Ncepfx Ag Tjld Potrebna površina pribl.: 3,5 x 2,65 x 2,65 m 5-osni simultani obdelovalni center, B-os (-120° / +30°), NC rotacijska miza integrirana v fiksni mizi, neposreden merilni sistem, 3D tipalo, centralno notranje hlajenje 20bar, 600l, izpiralna pištola, dopravnik ostružkov, pribl. 44.973 obratovalnih ur / 20.542 ur vretena

Stanje: rabljeno, Leto izdelave: 2002, hitrost vretena (min.): 10.000 obr/min, potovalna razdalja osi X: 3.400 mm, pomik osi Y: 2.800 mm, pomik po osi Z: 1.600 mm, Univerzalni obdelovalni center Tip stroja: DMG DMC 340 U Krmilnik: Heidenhain iTNC 530 Leto izdelave: 2002 TEHNIČNI PODATKI: Pomiki: X-os: 2.800 mm Y-os: 3.400 mm Z-os: 1.600 mm B-os C-os Hitri pomik (X/Y/Z): 60 / 30 / 40 m/min Zasukalna glava Območje vrtljajev: 10.000 1/min Pogonska moč: 44/32 kW Navor: 288 Nm Vpenjalni sistem orodja: HSK 100 Število orodnih mest: 120 Premer orodja: 130 / 250 mm Dolžina orodja: 650 mm Teža orodja: 30 kg NC-rotacijska miza: 2.500 x 2.000 Paletni sistem Število palet: 2 Velikost palete: 2.500 x 2.000 mm Dodaten namizni podstavek: Ø 2.800 Bljdpfx Agjx Uxc Ts Tsd Oprema: Notranje hlajenje (IKZ): bar Rezervoar za hladilno tekočino: l Transporter za ostružke Elektronski ročni kolesček Pištola za izpiranje ostružkov

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 37.654 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10915548924, največja hitrost vretena: 18.000 obr/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Ponujamo to rabljeno univerzalno obdelovalno središče Deckel Maho DMU 50 eVo linear, letnik 2006. Vodila osi X, Y in Z ter kroglična vretena so bila konec leta 2023 popolnoma zamenjana. Bjdpox Srp Uefx Ag Tsld Stroj je trenutno geometrijsko kot nov. Za dodatna vprašanja ali informacije nam pišite ali nas pokličite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 14.297 h, Krmilna enota Znamka: Heidenhain Model: iTNC 530 Glavni pogon Območje hitrosti vretena: 18000 Število osi: 5 Pomiki Pomik X-osi: 735 mm Pomik Y-osi: 650 mm Pomik Z-osi: 560 mm Orodja Tip držala orodja: SK40 Bljdpfx Aex D N Nmsg Tod Dodatna oprema Magnetna plošča 3D infrardeča sonda Ta 5-osni stroj DECKEL MAHO DMU 65 monoBlock je bil izdelan leta 2012. Ponaša se z vertikalnim obdelovalnim centrom z vretenom 18000 vrt/min in 3D infrardečo sondo. Dimenzije stroja so X: 735 mm, Y: 650 mm, Z: 560 mm. Idealen za kompleksne in natančne obdelovalne naloge, stroj DECKEL MAHO DMU 65 monoBlock je na voljo za prodajo. Za dodatne informacije o tem vertikalnem obdelovalnem centru nas kontaktirajte. Vrsta uporabe Rezkanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 42.339 h, Glavni pogon Bljdpex D Nwkefx Ag Tod Število osi: 3 Gibanja Pomik po osi X: 730 mm Pomik po osi Y: 510 mm Pomik po osi Z: 510 mm Mediji Transporter za odrezke: Da Notranje hlajenje: Da Ta 3-osni DMG DECKEL MAHO DMU 60 monoBlock je bil izdelan leta 2005. Opremljen je s transporterjem za odrezke in sistemom notranjega hlajenja, kar ga naredi idealnega za zahtevnejše obdelovalne naloge. Če iščete visoko kakovostno rezkalno opremo, razmislite o stroju DMG DECKEL MAHO DMU 60 monoBlock, ki je pri nas na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, X-axis travel 1,250 mm Y-axis travel 880 mm Bjdpfx Agogypabj Teld Z-axis travel 800 mm Main spindle: Speed range – main spindle max. 12,000 rpm Drive power – main spindle 15 / 10 kW Table clamping surface 1,500 x 1,050 mm Number of tool positions 30 pcs.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 24.128 h, potovalna razdalja osi X: 530 mm, pomik osi Y: 380 mm, pomik po osi Z: 380 mm, število mest v zalogovniku orodij: 24, največja hitrost vrtenja: 8.000 obr/min, kot vrtenja osi B (max.): 180 °, kot vrtenja osi C (maks.): 360 °, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control system: Heidenhain Millplus Spindle speed: 8,000 rpm Power: 15 kW Torque: 130 Nm Tool holder: SK40 NC rotary tilt table B-axis: 180°, 16 rpm C-axis: 360°, 18 rpm Clamping surface: Ø500 × 380 mm Max. table load: 200 kg T-slot spacing/size: 63 / 14 H7 mm Centering bore: Ø30 H7 mm Max. torque (rotary axis): 1,000 Nm Max. table plate rotation (rotary axis): 18 rpm Bodpsv Tp Dmjfx Ag Tjld Max. tilting moment: 1,100 Nm Swivel speed: 16 rpm Travel and measurement Rapid traverse in X/Y/Z axis: 30 m/min Position feedback system: Direct in X/Y/Z (glass scales) Tool magazine Tool magazine: 24 stations Max. tool length from spindle nose: 280 mm Max. tool weight for automatic tool change: 6 kg Max. total tool weight in magazine: 80 kg Required compressed air: approx. 5.5 – 8.0 bar Compressed air consumption: approx. 7 m³/h Chip management Chip management: chip tray MACHINE DETAILS Operating hours: 58,886 h Spindle hours: 24,128 h Weight: 4,400 kg Installation dimensions: 5.2 x 4.0 x 3.1 m (without peripherals) Transport dimensions: 2.45 x 1.76 x 3.38 m, 3.5 t The zero-point clamping plate on the working table is not included in the scope of delivery.

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm Blodpfxotqqmhs Ag Tod y-axis travel: 525 mm z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 710 mm, pomik po osi Z: 710 mm, model krmilnika: MILLPLUS iT HEIDENHAIN, obremenitev mize: 800 kg, 5-osni simultani obdelovalni center! TEHNIČNI PODATKI Premik X: 1.250 mm Premik Y: 710 mm Premik Z: 710 mm Delovna površina mize: 1.500 x 800 mm Obremenitev mize: 800 kg Število vrtljajev: 12.000 min⁻¹ Vretenov motor: 15 / 10 kW Vpenjalni stožec: SK 40 Menjalnik orodij: 60 pozicij PODROBNOSTI O STROJU Krmilje: MILLPLUS iT HEIDENHAIN Priključna moč: 44 kVA Bodjxwlgzspfx Ag Told Dimenzije in teža Potrebni prostor: cca 3,5 x 2,65 x 2,65 m Teža stroja: cca 10,5 t OPREMA Os B (-120 / +30) NC-rotacijska miza integrirana v fiksno mizo Neposredni merilni sistem 3D infrardeča tipala HEIDENHAIN TS 640 IKZ 40 bar, 600 l Izpiralna pištola Transporter za ostružke Programska oprema 3D Quickset Opomba: Stroj je popolnoma delujoč. Rotacijska miza in os X povzročata zvoke.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, CNC rezkalni stroj Deckel Maho DMU 50 T krmilnik Heidenhain TNC426 število obratov: 20-9000 vrt/min pomik x, y, z: 20-10000 mm/min hitri pomik x, y, z: 12000 mm/min delovno območje X 500 mm, Y 400 mm, Z 400 mm vpenjalo orodja: SK40 DIN 69871 vpenjalni vijak DIN 69 872 menjalec orodja: 16 pozicij maksimalni izteg od konice vretena 290 mm delovna miza: ročno vrtljiva in ročno nagibna miza dimenzije 700 x 500 mm t-ulice M14 Bsdex Taq Nepfx Ag Told centrična izvrtina 30 mm transportni podatki: teža 3200 kg dimenzije (dolžina x širina x višina) 2,10 x 2,30 x 2,30 m

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: transportni trak za ostružke, Universal Milling Machine Deckel Maho DMU 50T with Heidenhain TNC 426 / 430 Control and Chip Conveyor Technical Data: >> Year of manufacture: 2000 >> Heidenhain control: TNC 426 / 430 >> Travel X500/Y400/Z400 >> C and B axes manually adjustable with digital readout >> Working spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder: SK40 >> Feed rate X, Y, Z - 10,000 mm/min Rapid traverse X, Y, Z: 12 m/min Bledpfx Aovyr N Seg Tjd >> Tool magazine: Number of tools: 16 >> Table Ø700x500 mm >> Swivel range +95° / -10° >> Dimensions and weight: Dimensions: 2,200 x 4,000 x 2,450 mm Weight: approx. 3,500 kg >> Coolant system >> Power connection: 400V, 17 kVA About the machine: For sale is a Deckel Maho DMU 50T universal milling machine equipped with a Heidenhain TNC 426/430 control, in very good condition. The table can be adjusted manually (digitally) via two additional axes (B and C). The machine runs smoothly and with high precision. The DMU 50T includes a chip conveyor. You are welcome to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel Maho DMU 50M with Heidenhain TNC 124 Path Control – Excellent Condition! Technical Data: >> Year of manufacture: 1998 >> Heidenhain TNC 124 control system >> Travel: X500/Y400/Z400 mm >> C and B axis, manual adjustment with digital readout >> Spindle speed: 20–4500 rpm >> Feed rate: 5000 mm/min Bedpfx Ajr Hbf Tog Tjld >> Rapid traverse: 5 m/min >> Tool holder: SK 40 >> Table dimensions: Ø700 x 500 mm >> Swivel range: +95° / -10° >> Electronic handwheel >> Weight: 2800 kg >> Machine footprint: approx. 4.0 m x 2.5 m, height 2.6 m >> Coolant system >> Power connection: 400V, 32A About the machine: For sale is a Universal Milling Machine Deckel Maho DMU 50M equipped with Heidenhain TNC 124 path control, in very good condition. The table has two additional axes (B and C), adjustable manually with digital display. The control system is very user-friendly, supporting position input and approach, deep and thread drilling, drilling patterns, hole circles, hole rows, and rectangular pocket milling. Programs can be entered and read via an interface. The Heidenhain path control facilitates easier and even more precise operation. The milling machine was used for training purposes in a large company. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel Maho DMU 50M with Heidenhain TNC 124 Contour Control – Excellent Condition! Blodpfer Hbf Esx Ag Tsd Technical specifications: >> Year of manufacture: 1998 >> Heidenhain TNC 124 Control >> Travel (X/Y/Z): 500/400/400 mm >> C and B axes manually adjustable with digital readout >> Spindle speed: 20 - 4,500 rpm >> Feed rate: 5,000 mm/min >> Rapid traverse: 5 m/min >> Tool holder: SK 40 >> Table size: Ø700 x 500 mm >> Swivel range: +95° / -10° >> Electronic handwheel >> Weight: 2,800 kg >> Machine footprint: approx. 4.0 m x 2.5 m, height 2.6 m >> Coolant system >> Power supply: 400 V, 32 A About the machine: For sale: a universal milling machine Deckel Maho DMU 50M equipped with Heidenhain TNC 124 contouring control, in excellent condition. The table can be manually (digitally) adjusted in two additional axes, B and C. The control system is very user-friendly: it allows input and approach of positions, deep and thread drilling, drilling patterns, hole circles, line boring, and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain contouring control makes operation easier and even more precise. The milling machine was previously used in a large company for training purposes. Take the opportunity to inspect and test the machine under power on site.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 11035509414, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, model krmilnika: Heidenhain TNC 426, največja hitrost vretena: 9.000 obr/min, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obliges you to collect the machine within the specified period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travels Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse & Feed Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate X-axis: 10,000 m/min Feed rate Y-axis: 10,000 m/min Feed rate Z-axis: 10,000 m/min Spindle speed (max.): 9,000 rpm Worktable (rotary table with swivel axis) Table width: 500 mm Table length: 700 mm Bodpfx Agsxp Nnme Told Table load capacity: 200 kg Holder diameter: 40 mm Tool length: 290 mm Tool weight: 6,000 g Number of tool magazine slots: 16 MACHINE DETAILS Control: Heidenhain TNC 426 Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,400 mm Electrical Data Total weight: 3,000 kg Input voltage: 400 V Type of input current: Three-phase EQUIPMENT Documentation/Manual Machine vice WNT (jaw width: 125 mm) SK 40 tool holders Cutting tools Workshop cabinet with accessories

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, teža obdelovanca (maks.): 200 kg, vrtljajska hitrost (min.): 9.000 obr/min, največja hitrost vretena: 9.000 obr/min, delovne ure vretena: 2.000 h, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Stroj je popolnoma kompleten in takoj pripravljen za uporabo. Vključno z 25 nosilci orodij. Programska oprema: Heidenhain 426/430. Knjige in dokumentacija so popolni. Bedpfx Aex Rqckog Told

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 12160000083, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 12.926 h, potovalna razdalja osi X: 936 mm, pomik osi Y: 850 mm, pomik po osi Z: 651 mm, število mest v zalogovniku orodij: 30, največja hitrost vrtenja: 10.000 obr/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 935 mm Bjdpfxowu Em Sj Ag Tjld Y-axis travel: 850 mm Z-axis travel: 650 mm Table Dimensions: 1,200 x 850 mm Maximum table load: 4,000 kg Spindle Spindle speed: 10,000 rpm Power: 44 kW Torque: 288 Nm Tool system Magazine capacity: 30 Tool diameter: 160 mm Tool length: 365 mm Feed rate: max. 40,000 mm/min Rapid traverse: 40 m/min MACHINE DETAILS Dimensions: 5.1 x 3.1 x 3.2 m Weight: 14.6 t Connected load: 63 kVA Operating voltage: 400 V, 50 Hz Total operating hours: 36,420 h Spindle hours: 12,946 h EQUIPMENT – without magnetic table

Stanje: rabljeno, Leto izdelave: 1996, obratovalne ure: 8.900 h, Funkcionalnost: popolnoma funkcionalen, DMG vertikalni obdelovalni center Model: DMU 50 V Leto izdelave: 1996 5 osi Blsdpfxsyahh Io Ag Tjd Premik v dolžino: 500 mm Prečni premik: 380 mm Navpični premik: 380 mm Vreteno: BT 40 Hitrost vretena: 8000 obratov/min Orodja v magazinu: 24 kosov Krmilnik: Deckel Maho MillPlus Delovne ure vretena: 8900 Vmesnik RS-232 C Kratka vpenjala

Stanje: dober (rabljeno), Leto izdelave: 2006, TECHNICAL DATA Main Drive Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Work Spindle: Taper type: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X axis AC servo motors: C, B, Y, Z Feed speed X, Y, Z: Up to 20,000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Measuring system Bodpfxeu Hkb Rs Ag Tjld Resolution: C, B, X, Y, Z: 0.001 mm Positioning tolerance: C, B, X, Y, Z: 0.010 mm Working Range X axis: 500 mm Y axis: 450 mm Z axis: 400 mm B axis: 0° to 161.955° C axis: n x 360° Tool Changer with Double Gripper Magazine positions: 120 Max. tool diameter without adjacent free slots: 80 mm Max. tool diameter with adjacent free slots: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance between T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6,800 kg Setup weight: Approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF SUPPLY Includes (but is not limited to): Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage detection Blum touch probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation No liability is assumed for the correctness, completeness, or accuracy of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, obremenitev mize: 200 kg, največja hitrost vretena: 9.000 obr/min, CNC Heidenhain TNC 426 DELOVNO OBMOČJE: Longitudinalno X: mm 500 Prečno Y: mm 400 Vertikalno Z: mm 400 Rotacija: 360° Nagib: -10°/+95° VRETENO: Hitrost vrtenja: obr/min 9.000 Moč (100%/40%): kW 9/13 Orodniški konus: SK 40 DIN 69871 POGON OSI: Hitrost pomika osi X, Y, Z: mm/min 10.000 Hitrost hitrega pomika X/Y/Z: m/min 12 DELOVNA MIZA: Ročna rotacijska miza z nagibno osjo Vpenjalna površina: mm 700 x 500 Največja nosilnost: kg 200 Razdalja/širina utorov: mm 63 / 14 H7 MENJALNIK ORODIJ: Število orodij v zalogi: št. 16 Največja dolžina orodja: mm 290 Največja teža orodja: kg 6 DIMENZIJE IN TEŽA: Dimenzije: mm 1.783 x 1.647 x 2.534 h Bledpfoxz Axijx Ag Tod Teža: kg 3.000 Leto: 2002

Stanje: rabljeno, x-travel 500 mm y-travel 400 mm Bedov Td Elopfx Ag Tsld z-travel 400 mm