Deckel Maho Dmc 100 V nakup rabljenega (339)

Leto izdelave: 2006, obratovalne ure: 109.000 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Horizontal machining centre with 6-station pallet system The machine has only been used for aluminium – new spindle installed in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001° Spindle speed: max. 18,000 rpm Control: SIEMENS 840D Shopmill Clamping surface: 500 x 500 mm Lredpfemfrgnsx Ahuen Table load capacity: max. 800 kg Workpiece diameter: max. 800 mm Workpiece height: max. 900 mm Tool holder: HSK 63 Tool changer: 180 positions Spindle power: max. 30 kW Torque: 5,000 Nm Holding torque: 5,000 Nm Rapid traverse/feed rate: 60 m/min Feed force X/Y/Z: 10 kN EQUIPMENT - Chip conveyor - Pallet station for 6 pallets - Automatic 3D tool measurement with M+H wireless probe - Coolant system with paper band filter - Through-spindle coolant system with band filter, 40 bar 30 tool pockets in the magazine are defective.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 85.355 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 71.405627, potovalna razdalja osi X: 600 mm, pomik osi Y: 700 mm, pomik po osi Z: 600 mm, model krmilnika: Heidenhain Millplus, širina mize: 630 mm, dolžina mize: 500 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Number of pallets: 2 pcs Clamping surface of pallet: 500 x 630 mm Maximum single-sided pallet changer load: 600 kg Maximum double-sided pallet changer load: 1,200 kg Maximum table rotation speed: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Setup mode: 2,000 mm/min Magazine positions: 60 pcs Maximum tool weight: 10 kg Maximum tool diameter: 100 mm Maximum tool length: 350 mm Linear measurement system Lrsdpfeyfhahjx Ahujn Resolution: 0.001 mm Input increment: 0.001 mm Position tolerance: 0.010 mm MACHINE DETAILS Control unit: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine with 60 tool pockets: 600 kg Footprint: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption (max.): 64 A Current consumption: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 32.510 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11670000823, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, največja hitrost vrtenja: 10.000 obr/min, število mest v zalogovniku orodij: 180, TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Speed-controlled asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Working Spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on X, Y, Z, and B axes Feed range X, Y, Z axes: 0 – 60,000 mm/min Rapid traverse X, Y, Z axes: 80 m/min Measuring System Resolution X, Y, Z axes: 0.001 mm Position tolerance X, Y, Z axes: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Drilling pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep Ledpjxf Htxefx Ahuern NC Rotary Table Max. table rotation speed: 30 rpm Holding torque (40% duty cycle): 5,000 Nm Holding torque (100% duty cycle): 3,250 Nm Workpiece Weight Per pallet: max. 800 kg Max. difference with uneven loading: 800 kg Tool Magazine Type: Vertical chain magazine HSK-A63 Capacity: 180 tools Tool change system: Double gripper Max. tool diameter (standard): 80 mm Max. tool diameter (with free adjacent slots): 160 mm Max. tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage monitoring (laser) - Mist separator - Probe - Hand-held control unit - Rinsing gun - Air blow cooling device - 4-color signal lamp - Dynamic package

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 880 mm, pomik po osi Z: 800 mm, višina obdelovanca (maks.): 1.230 mm, premer obdelovanca (maks.): 1.250 mm, hitrost vretena (min.): 18.000 obr/min, največja hitrost vretena: 18.000 obr/min, Krmiljenje Heidenhain iTNC 530 Menjalnik orodij za 60 orodij Avtomatska glava +180/-7° brezstopenjsko Lsdpfxew Ngipe Ahuern HSK A63 Število palet: 2 kosa Velikost palete: 1000*800 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, obratovalne ure: 9.700 h, DMG vertikalni obdelovalni center Model: DMU 50 V Leto izdelave: 1996 5 osi Pomik X-os: 500 mm Pomik Y-os: 380 mm Pomik Z-os: 380 mm Konus vretena: BT 40 Hitrost vretena: 8.000 vrt/min Orodja v magazinu: 24 kosov Krmiljenje: Deckel Maho Mill Plus Delovne ure vretena: 9700 Ljdpfx Asyvzq Nohujrn Vmesnik: RS-232 C 30 držal za orodje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, 5-osni DMG DMC60U duoblock Število ur vklopa: 78.000 h Število ur na vretenu po zamenjavi: 5.900 h (2022) 2023: Zamenjan XZ drsni pokrov Stroj si je mogoče kadarkoli ogledati po dogovoru. Krmiljenje: iTNC530 Heidenhain Pomiki: X-600 mm, Y-700 mm, Z-600 mm Os B: -30 / -180° Os C: 360° neomejeno Vpenjalni stožec vretena: SK40 Hitrost vretena: 20 - 12.000 min⁻¹ Magazin orodij: 60 mest Premer vrtljive mize: 630 mm Lrsdpfswglnyjx Ahusn Velikost palete: 630 mm x 630 mm Notranje hlajenje (IKZ): 40 bar Trakasti filtrirni sistem Dodatna oprema: merilna tipala, elektronski ročni kolo, dokumentacija, dva ničelna vpenjalna sistema.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.050 mm, pomik osi Y: 520 mm, pomik po osi Z: 520 mm, največja hitrost vrtenja: 12.000 obr/min, CNC control Heidenhain TNC 430 32-station tool changer Coolant system 2x chip conveyors Probe system Lrjdou Hf Ryepfx Ahujn The total X-axis travel is 2050mm, which means you can mill around 2 meters in one operation. A partition wall is also included. When the partition wall is installed, the X-travel is divided accordingly. Technical data / technical details: X-travel 2050 mm Y-travel 520 mm Z-travel 520 mm Spindle taper SK40 Spindle speed range 12000 rpm Number of tool stations in changer 2x 32 Spindle drive power 36 kW Weight approx. 12800 kg Technical data, accessories and machine descriptions are not binding.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 44.134 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.150 mm, pomik osi Y: 710 mm, pomik po osi Z: 710 mm, model krmilnika: HEIDENHAIN TNC426/430, največja hitrost vretena: 12.000 obr/min, Stroj je na voljo za 2.500 € (neto), naložen franko. TEHNIČNI PODATKI Pomik X-os: 1.150 mm Pomik Y-os: 710 mm Pomik Z-os: 710 mm Maks. hitrost vretena: 12.000 min⁻¹ Dimenzije mize: 1.500 x 800 mm Nosilnost mize: 1.100 kg C-os: 0 - 360° Vpenjalni sistem orodja: SK40 Število mest v orodjarniku: 32 PODROBNOSTI STROJA Delovne ure: 44.143 h Krmiljenje: HEIDENHAIN TNC426/430 Skupna priključna moč: 62 kVA Dimenzije in teža Dimenzije (D x Š x V): 3.600 x 2.800 x 3.000 mm Teža stroja: 9.700 kg OPREMA Lrsdpfey Uk Hwex Ahujn Sistem za hlajenje NC-rotacijska miza nameščena na delovni mizi Transporter za ostružke Elektronski ročni kolešček Priročniki / dokumentacija

Stanje: rabljeno, Leto izdelave: 2000, BAZ Deckel Maho DMU 50 evo Leto izdelave 2000 Lrodpfx Ajzdyugehujn

Stanje: dober (rabljeno), Leto izdelave: 2001, obratovalne ure: 11.000 h, Funkcionalnost: popolnoma funkcionalen, Krmilje HEIDENHAIN TNC426/430 Mere mize: 1500 x 800 mm Nosilnost mize: 1100 kg Pomik X-osi: 1150 mm Pomik Y-osi: 710 mm Pomik Z-osi: 710 mm Os C: 0 - 360 stopinj Hitrost vretena: 12.000 min⁻¹ Vpenjalni sistem orodij: SK40 Orodni magazin s 32 mesti Skupna priključna moč: 62 kVA Teža stroja: 9700 kg Lredpjy Txqhjfx Ahujn Dimenzije DxŠxV: 3600 x 2800 x 3000 mm Dodatna oprema, oprema - Hladilni sistem - NC-rotacijska miza nameščena na glavni mizi - IKZ (notranje hlajenje) - Transportni trak za odrezke - Elektronsko ročno kolo - Priročniki / dokumentacija Stroj je takoj pripravljen za prevzem.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 35.687 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, nazivna (navidezna) moč: 70 kVA, proizvajalec krmilnikov: Siemens, model krmilnika: 3D-Control Siemens 840D, višina obdelovanca (maks.): 525 mm, premer obdelovanca (maks.): 500 mm, teža obdelovanca (maks.): 240 kg, skupna višina: 2.800 mm, skupna dolžina: 4.700 mm, skupna širina: 6.000 mm, obremenitev mize: 240 kg, premer vrtljive mize: 500 mm, skupna masa: 12.000 kg, hitrost vretena (min.): 18.000 obr/min, delovne ure vretena: 20.101 h, dovod hladilne tekočine: 40 letvica, število mest v zalogovniku orodij: 60, dolžina orodja: 300 mm, teža orodja: 6.000 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, CNC krmiljenje: 3D-Control Siemens 840D Osni sistemi Pomik X-os mm: 600 Pomik Y-os mm: 500 Pomik Z-os mm: 500 C-os indeksacija stopinj: 360º (0,001) B-os indeksacija stopinj: -5 / +110º Razdalja med čelom vretena in površino mize mm: 600 Hodne hitrosti m/min: 80 Hitri pomiki m/min: 80 Pospešek osi m/s2: 10 Delovna miza Število palet: 2 Ledpfx Ahezd Agrjuorn Dimenzije palet mm: 500x500 Maks. dimenzija obdelovanca (D x V) mm: 500x525 Maks. masa obdelovanca kg: 240 Vreteno Maks. hitrost vrtenja vretena U/min: 18000 Moč pogona vretena kW: 35/25 (40%ED/cont) Vrtljivi moment vretena Nm: 130/87 (40/100%ED) Hlajenje Dovod hladilne tekočine skozi vreteno bar: 40 Prostornina rezervoarja litrov: 980 Orodni sistem Vpenjalni sistem orodja: HSK-A 63 Število orodij v zalogi: 60 Tip menjalca orodij: Dvojni griper S prostimi sosednjimi mesti mm: 130 Z zasedenimi sosednjimi mesti mm: 80 Maks. dolžina orodja mm: 300 Maks. teža orodja kg: 6 Čas menjave orodja (span-to-span) s: 4,5 Oprema Elektronski ročni kolesni upravljalnik Transporter za odrezke Merilna sonda infrardeča Izpiralna pištola Lovilec oljne megle Programabilne šobe za hladilno tekočino Uvoz DXF datotek Notranji dovod hladilne tekočine Aktivna hladilna enota za elektro omaro Komp. na temperaturo Papirni trakasti filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speed nastavitev DMG Netservice-client DMG Service Agent Obratovalni čas stroja: Ure pod napetostjo: 35.687 Delovni čas vretena: 20.101 Skupna poraba moči kVA: 70 Osnovni stroj: Dimenzije/teža Dolžina mm: 4700 Širina mm: 6000 Višina mm: 2800 Teža kg: 12.000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 42.768 h, proizvajalec krmilnikov: HEIDENHAIN, največja hitrost vretena: 18.000 obr/min, število osi: 5, Táto 5-osna DMG DECKEL MAHO DMU 50 eVo linear je bila izdelana leta 2005. Opremljena je s krmiljenjem HEIDENHAIN, notranjim hlajenjem skozi vreteno (IKZ) s tlakom 40 barov, skladiščem za 60 orodij in vretenom z do 18.000 vrt/min. Stroj ima avtomatizacijske možnosti, ki so popolnoma nastavljive za različne formate izdelkov in pozicioniranja. Če iščete kakovostno rezkalno stroj, razmislite o naši ponudbi stroja DMG DECKEL MAHO DMU 50 eVo linear. Za več informacij nas kontaktirajte. • Magazin za orodja: 60 orodij • Hlajenje skozi vreteno (IKZ): 40 barov • Vreteno obnovljeno leta 2024 • Obnova osi B in C leta 2024 Dodatna oprema • Avtomatizacija (obdelava izdelkov), prosto nastavljiva glede na format in pozicijo izdelka Lrsdpfxex Rd Hpo Ahuon • Filter s papirnatim trakom • Blum laserska detekcija zloma orodja • Odsesovalni sistem ni vključen Tehnične specifikacije Sistem stožca SK 40

Stanje: rabljeno, Leto izdelave: 2007, x-hod 1.250 mm y-hod 1.000 mm z-hod 1.000 mm Upravljanje SIN840D pl C-osovina (sto) 360 x 0,001° Ljdpfjzafivjx Ahuorn Posmak X/Y/Z-osovina 20 - 10.000 mm/min Brzi hod X/Y/Z 60,00 m/min Prihvat alata SK50 Brzina vretena - bezstupanjski programibilno 20 - 8.000 1/min Brzina vretena, stupanj prijenosa 1: 20 - 1.400 1/min Brzina vretena, stupanj prijenosa 2: 1.400 - 8.000 1/min Pogonska snaga 100% radnog ciklusa 32,00 kW Pogonska snaga 40% radnog ciklusa 44,00 kW Moment pri 40%/100% radnog ciklusa 1.214 / 827 Nm Površina stola za stezanje 800 x 800 mm Opterećenje stola 1,50 t Magacin alata sa 240 mesta Prečnik alata 110 mm Prečnik alata sa 2 slobodna mesta 230 mm Dužina alata maks. 500 mm Maksimalna težina alata 30,00 kg Ukupna potrošnja energije 85,00 kW Težina mašine cca 32,00 t Prostor potreban cca 9,50 x 4,80 x H3,80 m Horizontalni obradni centar sa menjačem paleta. Upravljanje SIEMENS SINUMERIK 840D powerline, Mod rada 4, regal-magacin alata sa 240 mesta, trakasti filter sistem 980 litara, transporter strugotine, rashladni sistem kroz vreteno.

Stanje: pripravljen za uporabo (rabljen), Deckel Maho 5100027000 touch panel for Deckel Maho CNC 432 control, serial no. as per photo, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Ljdsi D Upgepfx Ahuern

Stanje: rabljeno, Leto izdelave: 2007, X-axis travel: 1,250 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Control: SINUMERIK 840D powerline C-axis (table): 360 x 0.001° B-axis (head): -10 – 180 x 0.001° Table rotation speeds, stepless: 10 – 500 rpm Feed rate X/Y/Z-axis: 20 – 10,000 mm/min Rapid traverse X/Y/Z: 60.00 m/min Tool holder: HSK 100 Spindle speed – stepless programmable: 20 – 8,000 rpm Spindle speed gearbox stage 1: 20 – 1,600 rpm Spindle speed gearbox stage 2: 1,600 – 8,000 rpm Drive power 100% duty cycle: 19.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 727 / 492 Nm Clamping surface diameter: 1,100 mm Table load capacity: 1.50 t Tool magazine with 240 places Tool diameter: 110 mm Tool diameter with free adjacent positions: 230 mm Maximum tool length: 500 mm Maximum tool weight: 30.00 kg Lodpfx Ajy E Tvijhuern Total connected load: 85.00 kW Machine weight: approx. 32.50 t Space requirements: approx. 9.50 x 4.80 x H3.80 m 5-axis machining center with turning function and pallet changer. Control: SIEMENS SINUMERIK 840D powerline, Operating mode 4, rack-type tool magazine with 240 places, band filter system 980 liters, chip conveyor, coolant through spindle, RotoClear.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 23.831 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15465588584, potovalna razdalja osi X: 400 mm, pomik osi Y: 400 mm, pomik po osi Z: 375 mm, model krmilnika: Heidenhain iTNC 530 HSCI, največja hitrost vrtenja: 18.000 obr/min, TEHNIČNI PODATKI Pomik X-os: 400 mm Pomik Y-os: 400 mm Ljdpfx Ahozgt U Ejuorn Pomik Z-os: 375 mm B-os: -5 do +110 stopinj C-os: 360 stopinj Dimenzije mize: 450 x 400 mm Maks. teža obdelovanca: 250 kg Hitrost vrtenja: 18.000 min⁻¹ Vpenjanje: HSK-A63 Število orodnih mest: 60 Hitri pomik: 80 m/min PODROBNOSTI O STROJU Krmiljenje: Heidenhain iTNC 530 HSCI Približna teža stroja: 7.150 kg Obratovalne ure Ure vretena: 23.831 h Skupne ure delovanja: 57.330 h OPREMA Trakasti filtrirni sistem NC rotacijska miza Ročna upravljalna enota FS Izpiralna pištola Merilna tipala Merjenje orodja Transporter ostružkov Rotoclear opazovalno okno Nadzor temperature Manipulacijski sistem 3R

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 15.869 h, potovalna razdalja osi X: 1.035 mm, pomik osi Y: 560 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530 E, največja hitrost vretena: 12.000 obr/min, število osi: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, a Y-axis travel of 560 mm, and a Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control system and a tool magazine with 30 tool positions. If you are looking for high-quality machining capabilities, you should consider the DMG DECKEL MAHO 1035V vertical machining center that we are offering for sale. Contact us for further details. - PLC software number: 4B0000_HEDR_02C - Development stage: L3 - DSP1: 340514 03.1 - ICTL1: 340517 01 - Control runtime: 40,697 hours - Machine runtime: 38,700 hours - Program runtime: 15,863 hours - Reference point time for axis 1: 14,213 hours / 15,835 hours - Tool change cycle time: 1,585 hours - Spindle taper: SK 40 - Tool magazine capacity: 30 positions (chain type) - Measuring probe: Heidenhain TS640 - Electronic handwheel: Heidenhain - Power capacity: 35 kVA - Maximum rated current (A Jn max): 50 A - Fuse rating / input current: 63 A - Mains voltage: 400 V - Frequency: 50/60 Hz - Control voltage: 230 V - DC supply: 24 V - Central lubrication system: Vogel pump unit with Divinol Lithogrease 000 fluid grease - Pneumatic regulation unit: Integrated SMC/Festo air filter and regulation unit Ledpfx Ahey Uvnyjuorn

Stanje: potreben popravila (rabljeno), Leto izdelave: 2003, obratovalne ure: 24.700 h, Funkcionalnost: omejena funkcionalnost, Leto izdelave 2003 NC-priključna okrogla miza C-os Ø800x620 Nagibna rezkalna glava B-os 0-90° Pomiki X 1080 Y 710 Z 710 Krmiljenje iTNC530 IKZ 40 bar Notranji pihalni zrak Zunanje hlajenje Število vrtljajev maks. 12000 1/min Lrodpfx Ajy Tadvshuen Vpenjalni stožec SK40 Magazin za orodje 32 mest Merilna sonda Infrardeča Heidenhain Elektronski ročni kolešček Heidenhain Rotirajoče opazovalno okno Rotoclear Transporter za ostružke Odvod oljne megle Hladilni sistem s papirnatim trakom filtrom Pištola za spiranje ostružkov Delovna svetilka Vpenjalni nosilec (poleg okrogle mize) za daljše obdelovance Na stroju je vpenjanje rezkalne glave puščajoče/okvarjeno.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 13.028 h, potovalna razdalja osi X: 640 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, skupna višina: 2.450 mm, širina mize: 2.400 mm, skupna masa: 6.500 kg, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 30, največja dolžina izdelka: 3.000 mm, število osi: 3, This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It offers an X-axis travel of 640 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 500 mm. The machine features a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking for high-quality machining capabilities, the DMG DECKEL MAHO 64V Linear vertical machining center we offer for sale is well worth considering. Contact us for further details. • Rapid traverse (X / Y / Z): 30 m/min • Maximum feed rate: 20,000 mm/min • Table clamping surface: 850 × 600 mm • Maximum table load: 600 kg • Automatic Tool Changer (ATC) magazine capacity: 30 stations • Maximum tool diameter: 80 mm (140 mm if adjacent stations are empty) • Maximum tool length: 300 mm • Maximum tool weight: 7 kg • Spindle speed range: 20 - 8,000 rpm • Tool taper: SK 40 / ISO 40 • Spindle power (100% / 40% duty cycle): 13 kW / 19 kW Ledpfoy S Azhsx Ahujrn • Maximum spindle torque: 140 Nm Technical Specification Taper Size SK 40

Stanje: rabljeno, Leto izdelave: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN Control MillPlus iT Clamping table surface ø 500 x 380 mm B-axis 0 - 161.955° Lredpfxswlvi Eo Ahusn C-axis 360° Spindle taper SK 40 Spindle speeds 20 - 18,000 rpm Max. spindle power 35 kW Max. torque at spindle 130 Nm Infinitely variable feeds up to 20,000 mm/min Rapid traverse X/Y/Z-axis 80 / 50 / 50 m/min Rapid traverse B-axis 40 rpm C-axis rapid traverse 50 rpm Number of tool magazine positions 30 Tool diameter with 2 free adjacent positions 130 mm Tool diameter when fully equipped 80 mm Max. tool length 300 mm Max. tool weight 6 kg Internal coolant supply 40 bar Total power requirement 52 kVA Machine weight approx. 6 t = 5-axis machining centre with 2-axis NC swivelling rotary table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Stanje: rabljeno, Leto izdelave: 2009, X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Control: SINUMERIK 840D Spindle speeds – stepless: 5 – 10,000 rpm Drive power at 40% duty cycle: 38.00 kW Drive power at 100% duty cycle: 25.00 kW Torque at 40% / 100% duty cycle: 288 / 187 Nm Spindle taper: HSK 100 Feed rate X/Y/Z axis: 0 – 60,000 mm/min Rapid traverse X/Y/Z: 60 m/min Feed force X/Y/Z: 12.00 kN B-axis: 180 x 0.001° Rapid traverse B-axis: 10 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360 x 0.001° Table rotation speed – stepless: 1 – 800 rpm Table drive power: 13.85 kW Max. torque at faceplate: 1,550 Nm Tool magazine: chain magazine, 60 positions Tool diameter: 110 mm Tool diameter with 2 free locations: 230 mm Max. tool length: 450 mm Max. tool weight: 30.00 kg Total connected load: 80.00 kW Machine weight approx.: 18.00 t Installation dimensions approx.: 7.50 x 5.50 x H3.50 m 5-axis machining centre with SIEMENS Sinumerik 840D control, band filter system 980 l, chip conveyor, coolant through spindle, extraction unit, Lredex Tiy Tepfx Ahusn BLUM tool measurement, probe, operation mode 4, tool taper cleaning, hydraulic clamping with proportional valve.

Stanje: rabljeno, Leto izdelave: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm Control system iTNC 530 Heidenhain Spindle speed range 20 – 18,000 rpm Main spindle drive power 35 / 25 kW Max. torque 130 / 87 Nm Tool holder HSK-A63 Clamping area of table 700 x 500 mm B-axis swivel range 0 – 180° Lrjdpfxeuntmdo Ahujn C-axis swivel range 0.001° Max. table load 350 kg Centering bore Ø30 H6 mm T-slots 7x 14H7 x 63 mm Table rotation speed 21.5 rpm Number of tool positions 32 Max. tool length 315 mm Max. tool diameter 105 mm Max. tool diameter with adjacent pockets empty 130 mm Max. tool weight 6.0 kg Rapid traverse (X / Y / Z) 50 / 50 / 50 m/min Feed rate 20,000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN Total power consumption 50 kVA Machine weight approx. 8.5 t Space requirement approx. 6.5 x 3.5 x 3.5 m 5-axis CNC machining centre DECKEL MAHO – DMU 70 eVolution - 5 axes - NC rotary-swivel table - Operating hours: Power on: approx. 62,500h / Spindle: approx. 15,100h

Stanje: dober (rabljeno), Leto izdelave: 2006, TECHNICAL DATA Main Drive Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Work Spindle: Taper type: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X axis AC servo motors: C, B, Y, Z Feed speed X, Y, Z: Up to 20,000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Measuring system Resolution: C, B, X, Y, Z: 0.001 mm Positioning tolerance: C, B, X, Y, Z: 0.010 mm Working Range X axis: 500 mm Y axis: 450 mm Z axis: 400 mm B axis: 0° to 161.955° C axis: n x 360° Tool Changer with Double Gripper Magazine positions: 120 Max. tool diameter without adjacent free slots: 80 mm Max. tool diameter with adjacent free slots: 130 mm Max. tool length from spindle nose: 300 mm Lsdpou Hkb Rsfx Ahuorn Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance between T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6,800 kg Setup weight: Approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF SUPPLY Includes (but is not limited to): Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage detection Blum touch probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation No liability is assumed for the correctness, completeness, or accuracy of the information provided.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15025703124, Rabljeni 5-osni obdelovalni center z dvojnim delovnim mizo Proizvajalec: DECKEL MAHO Lodpfxsyk S Hpe Ahuorn Tip: DMU 70VL Leto izdelave: 2001

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, proizvajalec krmilnikov: SIEMENS, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 35.000 W, število osi: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It offers a working area with an X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle with a maximum speed of 24,000 rpm and a tool magazine with a capacity of 120 positions. It features a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Please contact us for further details. • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional Equipment • Coolant tank with paper filter, 600 l • Touch probe • Chip conveyor • Electronic handwheel (remote control) Ledpfx Aeymcvmehuorn • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63