CNC obdelovalni center

Deckel Maho DMC 63 H

Stanje: dober (rabljeno), Leto izdelave: 2007, - Siemens 840 D CNC control - Bar capacity: 65 mm - Main and sub spindle with maximum speed of 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Speed of driven tools: 4,000 rpm - Tool holder: VDI 30 with drive according to DIN 5480 TRAVELS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) EQUIPMENT Coolant system Chip conveyor Bar feeder: TOP Automazioni XF 375 Nedpeuw Izvjfx Ab Ioli

Stanje: rabljeno, Turning diameter . mm Turning length . mm Swing diameter over bed slide . mm Nljdpfjqn A Rrsx Ab Iei Emco Hyperturn 665 (3 units) - Technology: Lathe - Machine designation: EMCO Hyperturn 665 Lathe - Year of manufacture: 2003 / 2012 / 2013 - Control: Siemens Sinumerik 840D-PCU 50 V1 - Attachments: Coolant system; chip conveyor - Electrical supply data: - Rated current: 110.00 A - Backup fuse: 125.00 A - Connected load: 56.00 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Travel X/Y/Z: 1530mm/530mm/465mm, spindle speed: 12,000 rpm, spindle power: 22 kW, spindle torque: 120 Nm, tool holder: SK40, tool positions: 54, rotary table diameter: 630 mm, max. table load: 500 kg, rapid traverse: 30 m/min. Documentation available. An on-site inspection is possible. Njdpfx Abjwm Npne Isli

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Nsdpfx Aod Ev Upsb Ieli Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: rabljeno, Leto izdelave: 2015, x-travel 600 mm Nledsvu E Rlepfx Ab Iei y-travel 800 mm z-travel 600 mm Accuracy 1.7 + L μ Temperature range 20 °C Machine weight approx. 1200 kg Space requirement approx. 1319 x 1940 x 2710 mm Gantry measuring machine on granite measurement plate with high precision, high-accuracy precision guides, wear-free air bearings, contactless scale system on all axes 0.1 μm, as well as with 3-axis CNC control, joystick, PH10M rotary/swivel head, measuring probe scanning kit 2 + scanning module kit. Dell OptiPlex system PC with LED monitor, keyboard, laser printer, and software for graphical representation of form deviation, assistant for generating movement paths, simulation model, Excel protocol output, statistics module. Flexible change system for storing the scanning modules. As is well known, measuring machines must be professionally dismantled by a specialized company and transported with special equipment. For this, a cost factor of approx. 3,500 EUR + VAT must be considered. The machine has already been dismantled, properly secured on pallets, and certified. It is now located in our warehouse. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), Inline blik-/pottenwasmachine & droger Volledig roestvrij staal Voor containers tot maximaal 180 mm breed en 250 mm hoog Njdpfsh Eazzjx Ab Ioli Wordt geleverd in huidige staat of Getest en aangepast aan klantspecificaties

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: Mill Plus, dolžina mize: 700 mm, največja hitrost vretena: 12.000 obr/min, 60 tool stations. 2-fold pallet changer. IKZ – spindle with 12,000 rpm, 40 bar Nsdpfeu S A Ansx Ab Isli Operating mode 4 for machining with the door open. Blum laser for tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe not included in the scope of delivery.

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 39.256 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, skupna višina: 2.800 mm, skupna dolžina: 7.000 mm, skupna širina: 7.000 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 12.000 kg, For sale: Deckel Maho DMC 60 T machining centre Nlodpfx Aowtft Njb Ioi The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis swivel range: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table rotation speed: max. 30 rpm Number of tool pockets: 120 positions Max. tool diameter: 80 mm Max. tool diameter with an empty adjacent pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse (X / Y / Z): 50 m/min Feed speed: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Space requirements: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, cooling system, high-pressure coolant 40 bar IKZ, paper band filter, 2-position pallet changer, tool breakage control Accessories such as clamping devices or tool holders are not included in the offer. On request, transport and loading can be organised throughout Europe at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery trading (purchase/sale) BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Stanje: rabljeno, Leto izdelave: 2008, Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 PL Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub spindle speed: 0 - 7,000 rpm Number of turret stations: 2 x 12 Tool holder: VDI 30 CNC Turning & Milling Center | EMCO - HYPERTURN 665MCPlus with main and sub spindle, C & Y axis, 2x turrets configured for driven tools and Irco Profimat bar feeder, equipped with Knoll SF 1000/Turbo-1 coolant system. The machine has approx. 26,710 hours in production operation. Scope of delivery / Equipment: + 2 spindles: main and sub spindle with C-axis + 2 turrets for driven tools (12 stations each) + Upper turret equipped with Y-axis + Internal coolant supply + Chip conveyor + Irco Profimat bar feeder + Driven tools (straight and angled) Nodpev Rgzksfx Ab Isli + Chucks for main and sub spindle + Extraction system + Workpiece discharge device with conveyor belt + Coolant system Knoll SF 1000/Turbo-1 + Various holders, approx. 80 pcs VDI 30 + Boring bar holder + Jaw holders The machine is in well-maintained condition. Please refer to the offer for further technical details. #Tags: HYPERTURN665 | HYPERTURN-665 | EMCO-HYPERTURN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Siemens Sinumerik 840D control system Bar capacity: 65 mm Spindle speed: 5,000 rpm 2 x 12-station turrets with driven tools Turret 1 with Y-axis Parts catcher Band filter system Chip conveyor Nljdpfx Aewh U D Hsb Isi IRCO Profimat bar feeder