Obdelovalni center - univerzalni

DECKEL MAHO DMU 70 eVolution

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 18.183 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 15035709304, potovalna razdalja osi X: 700 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, kot vrtenja osi B (max.): 180 °, kot vrtenja osi C (maks.): 360 °, The machine will remain under power until 06/03/2026. TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 520 mm C-axis: ±360° B-axis: 180° Iasdpoymmpdofx Abxou Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary table Clamping area: 700 × 500 mm T-slot spacing: 63 mm Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel moment: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input and display unit: 0.001° Max. tool length from spindle nose: 315 mm Max. tool weight (for automatic tool changer): 6 kg MACHINE DETAILS Control: Siemens 840D Shop Mill Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight with base: 9,255 kg EQUIPMENT 5-axis simultaneous machining 32-position tool changer Chip conveyor Internal coolant supply with 70 bar Blum TC50 spindle probe

Stanje: rabljeno, Leto izdelave: 2023, Stružnice Pomik X: 495 mm Pomik Y: 125 mm Pomik Z: 1560 mm Dolžina struženja: 1540 mm Iodpfx Abjy Nxc Aoxsau Maks. obhodni premer: 660 mm Maks. premer struženja: 660 mm Vreteninska izvrtina: 65 mm Območje vrtljajev do: 5000 obr/min Pogonska vretena B-os: ±120° Orodno vreteno: 12.000 obr/min Magazin: 38 orodij Teža: 18.800 kg Stanje: skoraj nerabljen, kot nov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, We are offering a top-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Complete, ready-to-connect system including all cables. Please note: The PC has a password set, but the software is included on CD. Iaodpfjw E I Itsx Abxju Includes various sensor heads: Measuring volumes: - Set 175x140 - Set 350x280 - Set 550x - Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready for operation with GOM ATOS IIe Software included on CD, steel scale bars with ATOS evaluation dongle Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Stanje: rabljeno, Technical Details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Iaodeu Ng Dgspfx Abxeu Longitudinal travel: 830 mm Table speed: 0.05–4.5 m/min, stepless Spindle speed: grinding spindle 1780, 2050 rpm Spindle speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2200x280 mm Table swivel range: 9° forwards / 10° backwards Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDER without internal grinding attachment - For precision grinding of external (and internal) as well as tapered surfaces. - Infeed of grinding spindle headstock by hand or hydraulically - Table feed hydraulically infinitely variable - Grinding spindle swivels by 60° - Workpiece headstock swivels by 90°, with MK 4 mounting - Tailstock, MK 3 mounting Equipment: - Wheel dressing device - Coolant tank including pump and supply as per description.

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm Iodjt Hw Nyepfx Abxeau X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min Iaedpfx Absfu Ivzoxou • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range upwards: 140 s Swivel time for full swivel range downwards: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Ijdocblc Sspfx Abxsau Counterweight weight: 2.3 t

Stanje: rabljeno, Leto izdelave: 2013, A 4-axis CNC machining centre by Spinner is available. Travel distances X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18 m/min, rapid traverse Z: 15 m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10,000 rpm, power: 22kW, tool holder: SK40, tool magazine: 24 positions, weight: approx. 8,000kg. Documentation available. Inspection on site possible. Iodewqd R Ujpfx Abxjau

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, potovalna razdalja osi X: 630 mm, pomik osi Y: 510 mm, pomik po osi Z: 560 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: MATRIX, širina mize: 500 mm, dolžina mize: 500 mm, obremenitev mize: 500 kg, skupna masa: 25.000 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 26.000 W, Ta 5-osni Mazak Variaxis 630-5X T je bila izdelana leta 2009 in ponuja napredne funkcije za kompleksne obdelovalne naloge. To vertikalno obdelovalno središče je idealno za precizno mehaniko in zagotavlja zanesljivo delovanje. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra Mazak Variaxis 630-5X T. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Število orodij (magazin ATC): 80 • Visok tlak skozi vreteno: 20 bar Dodatne informacije Stroj je še vedno priključen na elektriko Iajdpfxsyallkj Abxsu Tehnična specifikacija Vpenjalni stožec ISO 40

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, središčna višina pri ročični gredi: 1.100 mm, teža obdelovanca (maks.): 180.000 kg, dolžina brušenja: 11.000 mm, premer brusilnega koluta: 1.066 mm, skupna dolžina: 11.700 mm, hod vretena: 11.700 mm, teža obdelovanca med konicami: 180.000 g, razdalja med središči: 11.700 mm, POMINI CNC Rullslipmaskin Modell HD-425-2-7L Siemens 840D, 12 axlar. Tillverkningsår: 2006. Två plansystem – sliparens och arbetsstyckets rörelsebanor är separata. Maskinens precision: Rakehet: 0,001–0,002 mm/m Rundhet: 0,001–0,002 mm Excentricitet: 0,002 mm Kronprofil (max kronhöjd): upp till 0,1 mm ±0,002 mm/m Ytfinish utan svängmärken och utan matningsspår efter finslipning. Iaodpswdmy Sjfx Abxeu På separat bädd: Automatisk skjutmått, diameter 870–2.250 mm Virvelströmsprovare för sprickor och slag Ultraljudsdjupmätning upp till 180 mm Högtrycks spolning av slipskivan Automatisk eller manuell dynamisk balansering av slipskiva (elektromagnetisk) Diamantutrustad slipskivsformare (slipdressing) 2 hydrostatiska stöd 2 hydrodynamiska stöd 4 mjukstartpositioner för valsar Snabbväxlingsanordning för slipskiva inkl. motor Svängkran Vibrationsmätning och loggning på: Längsbädd vid huvudlagring Nackstöden Bakre upplag Slipspindelhuvud Bakre sliphuvud Vagnens sidosida Arbetsområde: Slipning längd: 11.000 mm Max diameter med 1.066 mm slipskiva: 2.200 mm Min diameter med 1.066 mm slipskiva: 800 mm Centrumavstånd: 11.700 mm Maximal valsvikt: 80 ton (utan stöd), 180 ton (med stöd) Minsta avstånd mellan slipskivans centrum och valsaxel: 845 mm Största avstånd mellan slipskivans centrum och valsaxel: 1.635 mm Bäddlängd, axel Z (hydrostatisk): Matning, steglöst 0–6.000 mm/min Oljefilmstjocklek: 0,020 mm Avstånd mellan vaggbäddar: 1.500 mm Bäddbredd: 160 mm Vagnens längd på bädden: 3.385 mm Slipspindelhuvud (axel X), slipskiveprob (axel A), inspektionsaxel A1: Slipspindelns tvärrörelse (kulkruv), axel X: 940 mm Upplösning axel X: 0,0001 mm Slipspindelns längd: 1.695 mm Spindellagers hydrostatisk diameter: 254 mm Manuell finskala, axel X: 0,00001 mm / division Kontinuerlig matning av slipskivan, U-axel: 0–0,35 mm/min Snabbmatning slipskiva, axel X: 0–830 mm/min Slipmotor (AC): 130 kW Slipspindelns varvtal: 400–1.100/1.600 rpm Slipningens yt-hastighet: steglöst Ythastighet slipskivdiameter 1.066 mm: 45 m/s Ythastighet slipskivdiameter 670 mm: 45 m/s Slipskivehål diameter: 508 mm Slipskivetjocklek: 76–152 mm Slipskivediameter: 670–1.066 mm Kroning, U-axel: Maximal krona på diameter: 10 mm Maximal konkavitet på diameter: 10 mm Huvudspindel: Arbetsstyckets varvtal: 5–50 rpm Huvudspindelmotor: 200 kW Max transmiterbart moment: 76,5 kNm Plansystemsdrift: V-remmar Max centrumdiameter, metriskt: 160 mm Pinolslag: 150 mm Huvudspindellängd: 3.110 mm Bakspindel: Pinoldiameter: 260 mm Pinolens slag: 750 mm Max centrumdiameter, metriskt: 160 mm Kon: Metrisk 5 % på diameter Bakspindellängd: 1.300 mm Bakspindelslag: 8.000 mm Skjutmått, arm Axel C, vagn Axel V, rotationsaxel B: Max mätbar diameter: 2.250 mm Min mätbar diameter: 870 mm Maskinens mått: Maskinvikt: 130 ton Längd: 19,5 m Bredd: 5,5 m Höjd: 3,2 m Fundamentdjup: 3,8 m