Deckel Lks nakup rabljenega (679)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm Podpfjt Aav Ijx Agpegw >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Brusilni stroj Friedrich Deckel Tip S1 V dobrem stanju Pgsdpsxzpq Sefx Agpew

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Na voljo je vertikalni rezkalni stroj Deckel FP4NC s krmiljem Heidenhain TNC 355. Letnik izdelave: 1987, vključno z omaro za orodje in raznim orodjem. Hodi osi X/Y/Z: 560mm/500mm/410mm, dimenzije X/Y/Z: cca 1800mm/1600mm/2000mm, teža: cca 2400kg. Ogled možen po dogovoru. Pedpjxyk Upjfx Agpjgw

Stanje: rabljeno, Leto izdelave: 2010, x-axis travel 1000 mm y-axis travel 1000 mm z-axis travel 1000 mm Control: Heidenhain iTNC 530 Tool holder: SK 50 Number of tool stations: 120 positions Power-on hours: approx. 66,737 h Spindle hours: approx. 36,316 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Fully enclosed safety cabin with sliding doors and interior lighting - Setup/work preparation area - Tool measurement in the work area via BLUM laser - 3D touch probe - Operating modes 3 + 4 - High-pressure coolant system, 40 bar with 600 l tank and paper belt filter - Chip flushing pistol with 1 bar/40 l pump - Chip conveyor - Brankamp process monitoring - Three-color signal light - Coolant ring nozzle - Air blast cooling device - Coolant supply system - Oil/emulsion mist extraction unit Pgjdpfoxylqxox Agpow - Control cabinet cooling unit - Operating manuals Accessories, illustrated tools and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to prior sale and changes or errors in the technical data and specifications!

Stanje: rabljeno, Univerzalni rezkalni stroj DECKEL FP1 Psdpjxxpp Njfx Agpsgw Pomik X: 300 mm Pomik Y: 150 mm Pomik Z: 300 mm Horizontalno + vertikalno vreteno Hitrost vretena: od 40 do 2000 obr/min Velikost mize: 600 x 210 mm Glava nagibna horizontalno Ravna delovna miza Vreteniški motor: 2 hitrosti Motor: 1,3 kW Pomiki: X - Z avtomatsko / Y ročno Napetost: 380 V Širina: 1200 mm Globina z električno omarico: 1200 mm Višina: 1600 mm Teža: pribl. 900 kg

Stanje: dober (rabljeno), DECKEL universal table, clamping surface 800 x 380 mm, 8 T-slots, condition as shown in pictures Pedexvxfhopfx Agpsgw

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C (new) and 3 stepless feed drives – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2867 >> Swivel-tilt rotary table (newly planed) >> Speed range: 40 – 2000 rpm >> Stepless feed drive in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW Pgjdpfx Ast Aarpsgpjw >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quills – SK40 taper >> Drawbar system M16 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout K+C, newly installed with manufacturer's warranty and operating manual. Readout features: setting reference points, zero points, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole arrays, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a Deckel FP1 universal milling machine, year 1985, in outstanding condition. The machine has minimal handwheel backlash and all spindles move smoothly. Even at maximum spindle speeds, the machine runs very quietly. On this newer FP1 model, feed drive is steplessly adjustable on all three axes, and rapid traverse is also available. The oil has been changed. Machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power onsite.

Stanje: dober (rabljeno), Leto izdelave: 2000, Ref.-Nr.: 10468 Hersteller: DECKEL MAHO Typ: DMU 80 Baujahr: 2000 Steuerung: Heidenhain Millplus Lagerort: Halberstadt Ursprungsland: Japan Maschinen-Nr.: 111xxxxx X-Weg: 800 mm Y-Weg: 700 mm Z-Weg: 600 mm Anzahl der T-Nuten: 9 / 14 Psdpfx Ajxvw Hqegpegw Aufspannfläche: Ø 900 x 630 mm T-Nuten Abstand: 63 mm Werkzeugaufnahme: SK 40 Werkzeugwechsler: 30-fach Spindeldrehzahl: 12.000 U/min Max. Drehmoment: 2659 Nm Betriebsstunden: 67.452 h Zentrierbohrung: Ø 50 mm Haltemoment: 4500 Nm Max. Umdrehung der Tischplatte: 10,7 U/min Vorschub: 3600°/min Auflösung des Messsystems: 0,001° NC-Rundtisch: 800 kg NC-Schwenkrundtisch: 600 kg Zusatzinformationen: - Aufspanntisch 900 x 630 mm - Späneförderer, Blechtechnik - Bandfilteranlage, Fabrikat Interlit - Typ SK 200-760 - Ölnebelabscheider - Posten Werkzeugaufnahmen - Werkbänke - 2x 6 Auszüge - Schraubstock - Backenbreite 125 mm - Rolladenschrank, 1-türig Die Maschine kann nach Absprache unter Strom besichtigt werden.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, - RABLJEN - 5-OSNI VERTIKALNI OBDELOVALNI CENTER Z ROTACIJSKO IN NAGIBNO MIZO X-POT: 500 mm Y-POT: 400 mm Z-POT: 400 mm VRETENO: 9000 vrt/min; 13 kW; HSK 63 B-OS: -10° +95° C-OS: 360° Psdowl R Dqepfx Agpogw DIMENZIJE MIZE: 700 x 500 mm NAJVEČJA DOVOLJENA OBREMENITEV: 200 kg MENJALNIK ORODIJ: VERIŽNI TIP; 16 POZICIJ KRMILNA ENOTA: HEIDENHAIN TEŽA: 3000 kg SKUPNE DIMENZIJE: 2000 x 1520 x 2140 mm DODATNA OPREMA: TRANSPORTER OSTRUŽKOV OPOMBA: ROČNA 5. OS

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, as new! Technical data: - Machine No.: 2101-51084, year 2011 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed on 2 axes - Drive power: 1 / 1.5 kW - Travel X/Y/Z: 300/150/340 mm - Vertical quill SK40 and horizontal quill SK40 - Drawbar system: S20x2 - Weight approx. 700 kg Pjdpfowpi Dqex Agpogw Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Hydraulic vice - Collets - Tool holders - Milling cutters - Operating manual - Coolant system About the machine: Offered here is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. Included accessories are a hydraulic vice with swivel base, collet chucks, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Pedevb Ud Ujpfx Agpjgw Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm Pedpfx Aeu Racrogpogw >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 Pjdpju T D Nrsfx Agpogw >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: Pjdpfx Agou Nvwvjpogw - 3-axis digital readout Heidenhain TNC111 - Coolant system - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout - Excellent Condition! Technical Data: >> Machine No.: 55249/08, Year: 2010 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW Pgedsxu Hbhjpfx Agpsw >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar thread S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the Machine: Offered is a Deckel FP1 universal milling machine, professionally repowered by FPS and in like-new condition. The accessories include a hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout enables easier and more precise work. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-axis Active Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed in TOP Condition Technical data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (newly planed) >> Spindle speed: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travels X/Y/Z: 400/220/400 mm Pjdpfx Ajuc Ubwegpjgw >> Vertical milling head on spindle carrier, adjustable by 150 mm >> Vertical and horizontal quill – SK40 extendable >> Drawbar thread: S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3-axis TNC 113 Active Digital Readout by Heidenhain >> Coolant system >> Central lubrication About the machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from the laboratory of a government facility where it was rarely used. The machine exhibits minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this later FP2 model, the feed can be infinitely adjusted on all three axes, and rapid traverse is available on every axis. A major advantage is the active 3-axis digital readout. Using the Heidenhain path control, you can enter dimensions that the machine then approaches automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. You are welcome to inspect and test the machine under power on site.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Pedpfx Aeu R D I Ssgpjgw As-New CONDITION Technical Data: >> Year of manufacture: 1987 Machine no. 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Automatic central lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalogue About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in an as-new, original condition. The machine has very minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be infinitely adjusted on all three axes, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter dimensions which the machine then approaches automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, working with the machine is easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine No. 2102-5231 >> Fixed Angle Table >> Spindle Speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle mount, adjustable by 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital readout >> Centralized electric lubrication >> Coolant system >> Operating manual and spare parts diagram Details about the Machine: Psdpfx Agoxu E R Iopsgw Offered is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes, as well as rapid traverse in these directions. A major benefit is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter target dimensions, and the machine will automatically move to them. This FP1 was used in a training workshop where it saw only occasional use. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this outstanding machine under power on site. The machine is available immediately.

Stanje: dober (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, Deckel S0E Engraving Cutter Grinding Machine with Accessories Technical Data: >> Machine No.: SOE 77-3997, Year of Manufacture: 1977 >> Drive Motor Speed: 2800 rpm >> Grinding Spindle Speed: 4500 rpm >> Drive Power: 0.55 kW / 380 Volt >> Approx. Weight: 200 kg Accessories and Equipment: >> Collets >> Grinding Wheels >> Machine Stand / Base >> Dressing Device Pgodpjwrm Nvjfx Agpsw >> Tools >> Grinding Dust Extraction About the Machine: A Deckel SOE engraving cutter grinding machine with accessories is being offered. Mechanically and electrically tested. A well-maintained and fully functional machine. Take advantage of the opportunity to view and test the machine under power at our location.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Universal Tool Grinding Machine Michael Deckel S11 speed, Year of Manufacture 2002, Very Good Condition!! Technical Data: >> Year of manufacture: 2002 >> Serial no. 2197 Clamping Range: >> Clamping table size on tool slide: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool length between centers: 270 mm >> T-slot size on machine base: 12 mm Movement Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical adjustment of grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment: Tool carrier: 220 mm Grinding head support: 800 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Pgjdpjwrnf Ejfx Agpjw Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, infinitely variable: 2000 to 12000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (D x W x H): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: >> See photos About the Machine: For sale is a universal tool grinding machine from Michael Deckel, model S11 speed. The machine is suitable for grinding highly precise parts. With the S11, individual pieces and small batches can be ground remarkably quickly, economically, and flexibly, all with maximum user comfort. The Deckel S11 speed is in very good condition, mechanically and electrically tested. You are welcome to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Universal Tool Grinding Machine Michael Deckel S11 – Very Good Condition!! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1651 Clamping Range: >> Mounting surface of tool carriage: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter when free-standing in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width machine base: 12 mm >> T-slot width grinding head, tool carriage, and accessories: 8 mm Movement Range: >> Working travels Grinding stroke: 190 mm Grinding stroke for spiral grinding: 190 mm Cross movement of tool carriage: 100 mm Vertical adjustment of grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels Tool holder: 220 mm Grinding head support: 800 mm Universal dividing head on tool carriage: 330 mm >> Swivel angles Grinding head support: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Grinding Spindle: Psdpfem E T Ansx Agpjgw Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (D x W x H): 800 x 1100 x 1760 mm Space requirement (including operation): 2.5 x 2.3 m Accessories and Equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding attachment SK40 >> Handwheel device for tool carriage >> Extraction unit >> Machine lamp About the Machine: For sale is a universal tool grinding machine from the brand Michael Deckel S11. The machine is designed for grinding highly precise parts. The S11 allows for surprisingly fast, economical, and flexible grinding of single parts and small series, while offering maximum operator comfort. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Tool Grinding Machine Michael Deckel S5 in Very Good Condition Technical Data: >> Year of manufacture: 03/1995 >> Max. grinding wheel diameter: 100 mm >> Spindle speed: 5,600 rpm >> Power consumption: 1.5 kW >> Weight: 450 kg Accessories: >> Swiveling dividing head SK40 >> Various SK40 holders About the Machine: Offered for sale is a Michael Deckel S5 tool grinding machine. This machine is suitable for grinding high-precision parts. The Deckel S5 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and test this machine under power at our premises. Pedopr U Etspfx Agpegw

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Universal Tool Grinding Machine Michael Deckel S11 with accessories and tool cabinet in very good condition!! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Clamping surface of tool slide: 500 x 180mm >> Max. tool diameter between centers: 130mm >> Max. tool diameter with overhung clamping in universal dividing head: 620mm >> Max. tool length between centers: 270mm >> T-slots on machine base: 12mm >> T-slots on grinding head, tool slide, and accessories: 8mm Travel Range: >> Working travels Grinding stroke: 190mm Grinding stroke for helical grinding: 190mm Transversal adjustment of tool slide: 100mm Vertical adjustment of grinding head: 325mm Longitudinal adjustment of grinding spindle: 5mm >> Coarse adjustment travels Tool carrier: 220mm Grinding head carrier: 800mm Universal dividing head on tool slide: 330mm >> Swivel angles Grinding head carrier: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds, infinitely variable: 2000 to 10000 rpm Max. grinding wheel diameter: 125mm Max. cutoff wheel diameter: 200mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760mm Space Requirement (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc tool cabinet with contents: >> See pictures About the Machine: Pgodpsxu E Nqofx Agpsw For sale is a universal tool grinding machine, brand Michael Deckel S11. The machine is suitable for grinding highly precise parts. With the S11, single pieces and small batches can be ground surprisingly quickly, economically, and flexibly, all with maximum operating comfort. The Deckel S11 is in very good condition and comes with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 Pgjdpjxu E I Hofx Agpow >> Weight approx. 1300 kg Accessories and Equipment: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Centralized lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. The machine is immediately available!!!

Stanje: zelo dobro (rabljeno), Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Very Good Condition! Technical Data: >> Year of manufacture: 1986 >> Serial No.: 759 Clamping Range: >> Clamping surface of tool slide: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in the universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width machine base: 12 mm >> T-slot width grinding head, tool slide, and accessories: 8 mm Pedpfx Agjqd N S Dspogw Travel Range: >> Working travels Grinding stroke: 190 mm Grinding stroke during helical grinding: 190 mm Cross travel tool slide: 100 mm Vertical adjustment grinding head: 325 mm Longitudinal adjustment grinding spindle: 5 mm >> Coarse adjustment ranges Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, infinitely variable: 2000 to 12,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Space requirement (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. tool cabinet with the following contents: >> Universal dividing head SK40 >> Helical and clearance grinding device >> Radius grinding device SK40 >> Tailstock >> Swiveling support finger >> Machine vise >> SK40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutters >> Tooth supports >> Dividing head center >> Protective covers >> 1 set precision collets, as new, from 1 to 17.5 mm in 0.5 mm increments >> Grinding wheel arbors >> Various grinding wheels >> Index discs >> Extraction system with vacuum cleaner >> Various holders and much more (as shown in the pictures) About the Machine: Offered here is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding highly precise parts. With the S11, single parts and small batches can be ground surprisingly quickly, economically, and flexibly, all while offering the highest operating comfort. The Deckel S11 is in very good condition and is equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to see and test this machine under power on-site.