Deckel Fp 33 nakup rabljenega (680)

Stanje: rabljeno, x-travel 800 mm y-travel 400 mm z-travel 300 mm Heidenhain digital readout Clamping table size 1000 x 520 mm Spindle speed range 40 – 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Space requirements approx. 1700 x 1600 x 1800 mm Deckel FP 2 B – slant-bed, travelling column design Universal swivel-tilt table Including various SK40 tool holders, draw thread S20x2 Collet chuck The machine was overhauled for approx. €24,000.00 Fedpfxoqpl Uus Aprspk

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and milling arbors, as well as a tailstock. Machine is in good operational condition and can be demonstrated under power by prior arrangement. Fjdpfx Aju Ezb Eopropk

Stanje: dober (rabljeno), Leto izdelave: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good, operational condition. Can be demonstrated under power by arrangement. Fpsdpfxstp Nyfs Aprjk

Stanje: pripravljen za uporabo (rabljen), Travel distances: 300 x 150 x 340 mm Fedpjdr E Apefx Aprspk Universal table: 600 x 260 mm Spindle mount: ISO 40 Spindle speeds: 40–2000 rpm Digital readout Various accessories MARCELS MASCHINEN CH

Stanje: dober (rabljeno), Leto izdelave: 1964, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 200 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 200 obr/min, hitrost vretena (min.): 40 obr/min, vhodna frekvenca: 50 Hz, The machine is in good condition! Fpjdpfx Aoilg H Ejprsk Tool holder: SK 40 Travel X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirements LxWxH, approx.: 1200 x 1250 x 1670 mm Head swiveling: 90° / 90° Equipment: - 3-axis digital display - Coolant system We would be happy to demonstrate the machine to you under power at our premises. All information is provided without guarantee. Subject to prior sale. The item is sold excluding any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller, or for injury to life, limb, or health.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, skupna dolžina: 800 mm, širina mize: 460 mm, dolžina mize: 800 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.500 obr/min, vrtljajska hitrost (min.): 50 obr/min, trajanje garancije: 3 meseci, Oprema: dokumentacija / priročnik, Ponujamo to generalno obnovljeno rezkalno stroj Deckel FP4 M, letnik 1985. Fedpfx Aex Sllpsprjpk Proizvajalec: Deckel Model: FP4 M Letnik: 1985 Stanje: generalno obnovljeno Krmiljenje: TNC113 Aktiv Steuerung Opcijsko: univerzalna miza s vpenjalno površino 800mm x 370mm Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1968, potovalna razdalja osi X: 800 mm, pomik osi Y: 200 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, hod vretena: 80 mm, skupna dolžina: 1.000 mm, širina mize: 520 mm, dolžina mize: 1.000 mm, obremenitev mize: 2.000 kg, skupna masa: 2.500 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 2.000 kg, Ponujamo obnovljen rezkalni stroj DECKEL FP2LB, letnik 1968. Proizvajalec: DECKEL Fpodpfx Apjx Sdxzsrjk Model: FP2LB Letnik: 1968 Stanje: obnovljen Tip stroja: rezkalni stroj Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 1987, Deckel FP1 Aktiv s Heidenhain digitalnim prikazovalnikom za 3 osi, 3 aktivne osi, togo mizo, vreteno SK40 S20x2. Centralno mazanje, navodila za uporabo. V dobrem in delujočem stanju, pripravljen za uporabo. Po dogovoru možen prikaz v obratovanju. Fedpfx Apszbykworepk

Leto izdelave: 1990, stanje: dober (rabljeno), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1, FP2, FP3, FP4. Fodpehvz Iijfx Aprjpk Individual sale upon request.

Stanje: dober (rabljeno), Leto izdelave: 1986, CNC universal milling machine Fodjdtdahepfx Aprepk Manufacturer: DECKEL, Model: FP5NC, Year: 1986, Control: DIALOG 4 Parts only. Please inquire specifying exactly which parts you need.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 320 mm, skupna masa: 860 kg, Universal tool milling machine Ruhla Type 58 Thiel Duplex 58 similar to Deckel FP1 Compact machine with quill spindle and automatic feed on all 3 axes including vise New digital readout with 1 measuring scale included Swiveling table +/- 0-30° Table size 715 x 260mm X 300mm Y 160mm Z 320mm Dimensions (LxWxH) approx. 110 x 110 x 170cm Fjdpfxswf Agdo Aprepk Inspection and test run welcome

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control system - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gear transmission - Automatic clamping on X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement Fpodpfx Aswhk Ubjprsk - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle carrier: 150 mm Main drive: - Pole-changing three-phase brake motor: gear transmission with forward/reverse - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring assembly - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axes: 1 DC motor - Ball screw spindles: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Footprint (including safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Stanje: rabljeno, Leto izdelave: 1987, - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping system - Automatic speed change gearbox - Automatic clamping on X-/Y-/Z-axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling on Z-/Y-axes - Year of manufacture: 1987 Technical Data Working Area: - X-axis (longitudinal): 485 mm - Y-axis (transversal): 385 mm - Z-axis (vertical): 380 mm - Quill travel vertical: 80 mm - Vertical milling head traversable on spindle carrier: 150 mm Main Drive: - Motor: pole-changing three-phase braking motor and gearbox with forward/reverse operation - Power output: 3.7 / 4.4 kW - 18 spindle speeds: 50 - 2500 rpm - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: hydraulic Feed Drive: - X-axis: 1 DC motor - Y- and Z-axes: 1 DC motor - All axes: recirculating ball screws - Programmable feed rate: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal Table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 mm - Distance table center to mounting surface: 260 mm - Max. clearance height (vertical spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (C-axis): 360° - Tilting range (A-axis): +450 / -150° - Swivel range (B-axis): ±450° - Measuring range with direct digital display: Resolution 360,000 x 0.001° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Required floor space including safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg Fpodpsu Awlzsfx Aprek - Floor loading: 3000 kg/m²

Stanje: dober (rabljeno), Leto izdelave: 1986, CNC univerzalni glodalni stroj Proizvođač: DECKEL Tip: FP5NC God.1986 Kontrola: DIALOG 4 Putni hodovi: X710mm Y600mm Z500mm Stol za stezanje: 1000mm x 550mm Držač alata: SK40 Fodpfoy H Ifbsx Aprjpk Programabilna brzina posmaka: 2 ... 3600 mm/min Broj okretaja: 18 ... 6300 o/min Snaga vretena: 7,5KW Na zahtjev, transport i utovar mogu biti organizirani diljem Europe uz dodatnu naknadu. Sve cijene su bez PDV-a. Razgledavanje moguće po dogovoru. Kontaktirajte nas, naš tim će vam rado pomoći. Kupovina i prodaja strojeva KUPNJA/PRODAJA PROIZVODNIH I STROJEVA ZA OBRADU METALA, STROJEVA ZA ALATE I OSTALIH. Trebate kvalitetan, a povoljan stroj za svoju proizvodnju? Ili želite prodati svoj stroj? Za dodatne informacije ili mogućnosti kontakta, obratite nam se putem kontakt forme.

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper and S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by prior arrangement. Fpjdpfowg S Nksx Aprsk

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Fpjdjwg S I Tspfx Aprok

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Active TNC 111 Heidenhain Digital Readout and Accessories – Excellent Condition Technical Data: >> Year of manufacture: 1979 >> Machine no.: 2202-10512 >> Fixed angle table >> Spindle speed: 25 - 2500 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Motor power: 2.2 kW >> Spindle brake >> Travel (X/Y/Z): 400/220/400 mm >> Vertical milling head on spindle carrier adjustable by 150 mm >> Vertical and horizontal quill - ISO 40 (SK40) extendable >> Drawbar system: M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active Digital Readout Heidenhain >> Coolant system >> Central lubrication Fpjdpfx Apjy H Ibcjrjk >> 1 accessory cabinet including: Collets, tool holders, clamping tools, steady rest, indexing head with 3-jaw chuck, machine vice, steady rest, dividing plates, and much more About the machine: Offered here is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a government laboratory where it saw very little use. It includes an accessory cabinet with comprehensive tooling. The machine has very little backlash, and all the axes move smoothly. The geometry is outstanding. Even at maximum speeds, the milling machine operates smoothly. With this newer FP2 model, the feed can be steplessly controlled in all three axes, and each axis also has a rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain control system, you can enter dimensions which the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: rabljeno, Leto izdelave: 2007, x-Weg 880 mm Fpedpfx Asyaci Teprjk y-Weg 630 mm z-Weg 630 mm Steuerung iTNC 530 Heidenhain Drehzahlbereich - Hauptspindel max. 18.000 min/-1 Antriebsleistung - Hauptspindel 28 / 19 kW Max. Drehmoment 121 Nm Werkzeugaufnahme HSK-A 63 schwenkbar B: +30° / -120 ° Tischaufspannfläche Ø 700 / 1.250 x 700 mm max. Tischbelastung 650 kg drehbar C: 360 ° Anzahl der Werkzeugplätze 2x16 pos. Werkzeugaufnahme HSK-A 63 max. Werkzeugdurchmesser 80 mm max. Werkzeugdurch. bei freier Nachbarbox. 130 mm max. Werkzeuggewicht 8,0 kg max. Werkzeuglänge 315 mm Vorschubgeschwindigkeit max. 30.000 mm/min Eilgang 30 m/min Gesamtleistungsbedarf 48 kVA Maschinengewicht ca. 14,0 t Raumbedarf ca. 4,5 x 4,0 x 2,6 m 5 Achsen CNC - Bearbeitungszentrum Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rundtisch (C-Achse) integriert in Starrtisch - Schwenkfräskopf (B-Achse)

Stanje: rabljeno, Pogonska moč / kW Volt / V Amper / A Fpedjy S Eb Rjpfx Aprjk DECKEL MONITOR zaslon DIALOG FP2 / FP3

Stanje: rabljeno, Leto izdelave: 1983, Funkcionalnost: nepreverjeno, skupna višina: 1.900 mm, skupna širina: 2.500 mm, skupna dolžina: 3.000 mm, širina mize: 560 mm, dolžina mize: 1.400 mm, položaj glave za glodanje: Schwenkkopf, potrebna širina: 2.500 mm, zahteva za prostor dolžina: 3.000 mm, potrebna višina: 1.900 mm, Nudimo rabljeni rezkalni stroj Deckel FP4NC, letnik 1983. Dimenzije mize: 1.400/560 mm, vrtljiva glava, držalo orodja SK 40, tirni upravljalnik Dialog 4, postavitvene mere: 300/250/190 cm Masivna, težka izvedba z poševnim ležiščem. Na voljo je tudi 8 kosov držal orodja SK40 in strojni primež po povpraševanju. Lokacija: 89312 Günzburg Fpedpfsx Sygnsx Aprjk Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Dear Sir or Madam, Fpedjq H Eabopfx Aprjk We hereby offer a Deckel FP3 milling machine. The machine is extensively partially overhauled in our workshop and is therefore in excellent condition. Upon request, we are happy to equip the machine with safety or additional devices according to your requirements. We look forward to your inquiry! Delivery time: on request Dimensions: 2.00 x 1.60 x 1.90 m (LxWxH) Weight: approx. 1500 kg Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 380 mm Clamping table area: 800 x 420 mm Spindle speed range: 40–2000 rpm Spindle taper: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed speed: 10–500 mm/min Rapid traverse: approx. 1500 mm/min Further equipment and accessories: on request Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine of your choice - You can freely choose the paint color of the selected machine - Additional accessories such as tools can be ordered together upon request - Upon request, we can supply and install further equipment such as safety devices - We are happy to organize shipping and/or on-site installation

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, leto zadnje generalne obnove: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv milling machine. This newer version impresses particularly with its infinitely variable spindle speed control featuring a Heidenhain Aktiv controller, which makes operation both extremely straightforward and highly convenient. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site. Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary/swivel/tilting table Travel paths: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool holder: SK40 Fpjdsx Hr Dzopfx Aprjk Drawbar system: S20x2 Feed: stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital display with Aktiv controller, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can provide a complete or partial overhaul of the selected machine - Upon request, you can order additional accessories such as tools, etc. - Upon request, we can install further equipment, such as safety devices, directly for you - We are happy to arrange shipping and/or installation services

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, Dear Sir or Madam, For sale is a partially overhauled Deckel FP2. This later model stands out especially due to its stepless speed control, making operation very easy and extremely comfortable at the same time. The machine underwent extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site to see for yourself. --- 3 units currently available immediately! --- Availability: 3x Immediately Fpsdpfx Apjy Exayjrjk Machine No.: 2202-xxxx Table: Fixed angle table or swiveling rotary-tilt table Travel: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2,500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling pads, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can completely or partially overhaul the selected machine - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install further equipment such as safety devices, etc. for you - We are happy to organize shipping and/or on-site delivery for you

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with 3-Axis Active Heidenhain Digital Display and Stepless Feed – Excellent Original Condition Technical Data: - Year of manufacture: 1982 Fpodpey Eqkzsfx Aprsk - Machine no.: 2201-5527 - Swiveling, tilting, and rotating table - Spindle speeds: 25 – 2500 rpm - Stepless feed in 3 axes - Rapid traverse in 3 axes - Drive power: 2.0 / 4.0 kW - Spindle brake - Travel (X/Y/Z): 500 / 300 / 400 mm - Vertical milling head can be shifted 200 mm along the column - Extendable vertical and horizontal quill – SK40 - Drawbar system: M16 - Weight approx. 1,500 kg Equipment and Accessories: - 3-axis active digital display Heidenhain TNC113 - Coolant system - Central lubrication About the machine: Offered here is a Deckel FP3 universal milling machine in very good original condition. The machine has minimal backlash and all spindles move smoothly. On this newer FP3 model, feed is steplessly adjustable in all three axes. Additionally, the machine features rapid traverse on each axis. A major advantage is the active 3-axis digital display. With this Heidenhain control, you can enter dimensions that the machine then automatically moves to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. You are welcome to view and test the machine under power on site. The machine is available immediately.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Deckel FP5CC Fräsmaschine Guter Betriebszustand. Bitte sehen Sie sich auch unsere weiteren Angebote an. Fpsdperzu Stofx Aprjk