Cuoghi Ape 40 nakup rabljenega (23.348)

Stanje: dober (rabljeno), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical Data Climate Chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5 °C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Pgedpozg Txqefx Afajn Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical specifications. All data provided are subject to confirmation!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-40/2000 Air-Cooled Temperature Test Chamber Technical Specifications: Refrigeration Unit: Air-cooled, low-noise, full hermetic design with stepless power adjustment via electronic monitoring and control system; environmentally friendly refrigerant R404A. Door: Fully openable, left-hinged door with one-hand operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Load per shelf: max. 35 kg Total maximum load (all shelves): 100 kg Test Chamber Lighting: 3x halogen lamp 20 W, 12 V Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of setpoint values Plain text error messages RS 232 interface Free relay outputs for user-provided test item control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Cable port: nominal width 50 mm Control Panel Window: 570x710 mm Electrical connection, cable length: 5 m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate (acc. IEC 60068-3-5): Heating: 2.5 K/min Cooling: 1.5 K/min Heat Radiation: Approx. 2500 W at +20°C Approx. 2100 W at ±0°C Approx. 1500 W at -20°C Technical data specified for ambient temperature +25 °C, rated voltage 400V, without test samples, without radiant load, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: Power supply: 400 V +6/-10%, 3/N, 50 Hz Pgodpfx Aezg Twasfajn Rated Power: 17.2 kW Protection class: IP 22 Condensate drain: gravity flow, R 1/2" internal thread Sound pressure level (per DIN EN ISO 3744, measured 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important Safety Information for Buyers! The following actions are performed on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (Refer to image) (Subject to change and error in technical data and specifications!) For further questions, feel free to contact us by phone.

Stanje: rabljeno, Leto izdelave: 2016, x-axis 6,800 mm y-axis 4,000 mm z-axis 1,500 mm Control: iTNC 530 HSCI Heidenhain Max. clearance between columns: 5,090 mm Distance spindle centre to table: 1,825 mm Type: 175149A-0007 Main spindle speed range: max. 19,800 rpm Main spindle drive power: 20 kW Tool holder: HSK-A63 Swivel range B-axis: +115° / -115° Rotary range C-axis: +/- 200° Type: 178099-0005 Main spindle speed range: max. 10,020 rpm Main spindle drive power: 20 kW Tool holder: HSK-A100 Swivel range B-axis: +115° / -115° Rotary range C-axis: +/- 200° Clamping table area: 6,000 x 3,000 mm Max. table load: 50.0 t Height above floor: 100 mm Number of T-slots: 12 T-slot width: 28H12 mm T-slot spacing: 250 mm Number of tool positions: 62 (38+24) pos. Number of tool positions HSK A63: 37+1 pos. Number of tool positions HSK A100: 23+1 pos. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 mm Max. tool weight HSK A63: - kg Max. tool diameter HSK A100: 80 mm Max. tool length HSK A100: 450 mm Max. tool weight HSK A100: - kg Rapid traverse (X / Y / Z): 40,000 mm/min Rapid traverse B/C: 4,320 °/min Podpfezf Nn Sox Afasgn Feed rate X/Y/Z: 30,000 mm/min Feed rate B/C: 2,160 °/min Max. acceleration: 3.2 m/s² x-axis 6,800 mm y-axis 4,000 mm z-axis 1,500 mm b-axis +115° / -115° c-axis +/- 200° Total power requirement: 180 kVA Space requirement approx. 12.5 x 15.0 x 7.0 m 5-axis high-speed portal large machining centre DROOP & Rein - FOGS 40 60 C - Fork-type milling head

Stanje: dober (rabljeno), Orodno držalo, držalo za rezkanje, rezkalno orodje, adapter, vmesna puša, reducirna puša Podjzhkxkopfx Afaegn - Pogonski obroči: za natakljiv rezkalni trn, 19 kosov - Tip: Ø 13 do 40 mm - Količina/velikost: glej slike / kosovnica - Oddaja/cena: komplet - Transportne dimenzije: 200/120/V80 mm - Skupna teža: 4,4 kg

Stanje: dober (rabljeno), Gear motor, electric motor, electric geared motor - Manufacturer: VEM, geared motor with brake - Type: ZG2 BPRE 71 K 4 - Speed: 40 rpm - Power: 0.55 kW - Design: B3 - Shaft: Ø 32 x 80 mm - Protection class: IP 44 - Brake: 4.4 Nm - Dimensions: 520/203/H235 mm - Weight: 26 kg Pjdpfx Afjh Ezd Njaogn

Stanje: dober (rabljeno), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device - Milling holders: adapters for tool presetting device, 7 pieces Psdpfx Afepix Nkoasgn - Types: HSK 63, HSK 100, SK 40/50, ANSI/CAT, see photos - Sale/price: complete set - Overall dimensions: 500/300/H170 mm - Weight: 34.4 kg

Stanje: rabljeno, številka stroja/vozila: 13899, Leto izdelave: 2011, obratovalne ure: 8.016 h, nosilnost: 4.000 kg, dvižna višina: 5.760 mm, prosto dvigovanje: 1.800 mm, težišče tovora: 500 mm, gradbena višina: 2.780 mm, velikost sprednje pnevmatike: 355/50-15, velikost zadnje pnevmatike: 200/75-9, skupna masa: 6.895 kg, tip motorja: Električni, proizvajalec: Still Pgjdpfx Afoy Dyl Uoasn

Stanje: zelo dobro (rabljeno), ESPEC PL-2KPH klima testna komora Proizvajalec: ESPEC CORP. Model: PL-2KPH Tip stroja: Temperaturna in klimatska testna komora Prostornina testnega prostora: 225 l Na prodaj je rabljena klimatska testna komora ESPEC tip PL-2KPH. Naprava je primerna za temperaturna in klimatska testiranja, simulacije okoljskih pogojev, testiranje materialov in elektronike ter uporabo v raziskavah, razvoju in zagotavljanju kakovosti. Tehnični podatki Temperature območje: -40 °C do +180 °C Območje vlažnosti: pribl. 10 do 98 % r.F. Nihanje vlažnosti: ±2,5 % r.F. časovno / ±3,0 % r.F. Hitrost segrevanja: pribl. 3,5 K/min Hitrost ohlajanja: pribl. 1,1 K/min Notranje mere (Š × V × G): 500 × 750 × 600 mm Zunanje mere (Š × V × G): 910 × 1.590 × 973 mm Napajanje: 400 V AC / 3~ / 50 Hz Priklop: CEE 16 A Maks. tok: 11 A Hladilno sredstvo: R404A Teža: pribl. 300 kg Oprema Programirljivo mikroprocesorsko krmiljenje Upravljalna plošča Funkcija časovnika Prikaz kode napake Zvočni in optični alarm Zaščita pred previsoko temperaturo Zaščita testiranih izdelkov Osvetlitev testnega prostora Števec obratovalnih ur Področja uporabe Testiranje temperature Klimatsko testiranje Simulacija okolja Testiranje materialov Testiranje elektronike Avtomobilska industrija Testiranje baterij Zagotavljanje kakovosti Raziskave in razvoj Stanje Rabljeno Vizualno stanje skladno s slikami. Dobava ESPEC PL-2KPH klima testna komora Pedpfx Aezg D Rqefasgn Obseg dobave kot je prikazano. Pridržujemo si pravico do sprememb, napak in predhodne prodaje.

Stanje: rabljeno, Leto izdelave: 2014, tip droga: teleskopski, vrsta goriva: dizel, Dvižna zmogljivost: 227 kg Za več informacij se obrnite na Center za rabljeno opremo. Psdpezf Auxefx Afajgn

Stanje: rabljeno, Leto izdelave: 2012, vrsta goriva: plin, Dvižna zmogljivost: 3.000 kg Pgjdpfx Aozfnbwefajn Za dodatne informacije se obrnite na center za rabljeno opremo.

Stanje: novo, Working width (finished size): 23–180 mm Working height (finished size): 6–105 mm Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Motor power, vertical spindles: 1 x 7.5 kW Pgedeiiv Dcepfx Afaen Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Clamping length, horizontal spindles: 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Extraction connection diameter: 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Power output: 1.5 kW Saw blade speed: 2800 rpm Saw blade diameter: 250 mm Saw blade bore: 30 mm Cutting length: 400 mm (with 20 mm workpiece thickness) Pedpoulzchsfx Afaegn Cutting length at 45 degrees: 230 mm Cutting depth: 65 mm Arm swivel lock: +/- 45 degrees Weight: 140 kg Motor protection switch Brake motor Emergency stop switch CE Marking Including dust collection hood for extraction connection, diameter 120 mm Note on used machines: • Technical details are subject to errors and prior sale. • Prices listed are ex-location, loaded free onto transport. • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at the specified location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, delovna širina: 4.050 mm, najv. debelina pločevine: 8 mm, TEHNIČNI PODATKI Širina pločevine: 4.050 mm Debelina pločevine: 8 mm Pgedpfozapq Dsx Afaon Krmiljenje: konvencionalno

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 8.806 h, nosilnost: 4.000 kg, dvižna višina: 4.450 mm, prosto dvigovanje: 150 mm, težišče tovora: 500 mm, vrsta goriva: električni, tip droga: drugo, gradbena višina: 3.150 mm, kapaciteta baterije: 870 Ah, preostala kapaciteta baterije: 80 odstotek, napetost baterije: 80 V, Certificirano po DGUV do: 07/2027, dolžina vilic: 2.400 mm, Oprema: CE označba, UVV varnostni pregled, bočni pomik, kabina, osvetlitev, popolna servisna zgodovina, Still RX 60-40 električni viličar z naslednjimi podatki: Nosilnost: 4.000 kg Dvižna višina: 4.450 mm Višina konstrukcije: 3.150 mm Leto izdelave: 2010 Delovne ure: 8.806 STILL 4,0-tonski električni viličar s popolno kabino in gretjem, baterija 80%, dobre pnevmatike (zadaj nove), teleskopski – prosti steber, bočni pomik vilic, 4. ventil, razsvetljava skladna s predpisi StVZO, dolžina vilic 2.400 mm (po dogovoru možne druge dolžine vilic), polnilnik Dodatna oprema, kot so nastavljive vilice, obračalna naprava ipd., na zahtevo. Cena franko tovarna, vključno s 1.000-urnim servisom po navodilih proizvajalca STILL in veljavnim pregledom FEM (UVV) ob prodaji. Ogled, predstavitev in testna vožnja po predhodnem telefonskem dogovoru. Prodaja izključno pravnim osebam, vmesna prodaja in napake ter tipkarske napake pridržane. Pgsdpfsyuaglox Afaen Vaš novi viličar lahko ugodno dostavimo z lastnim nizkopodnim priklopnikom z rampo (stroški prevoza na zahtevo). Več informacij o nas in drugih ponudbah najdete na naši prenovljeni spletni strani!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 3.796 h, nosilnost: 4.000 kg, dvižna višina: 4.650 mm, prosto dvigovanje: 1.650 mm, težišče tovora: 500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.350 mm, kapaciteta baterije: 930 Ah, napetost baterije: 80 V, Certificirano po DGUV do: 07/2027, dolžina vilic: 1.500 mm, Oprema: CE označba, UVV varnostni pregled, bočni pomik, kabina, osvetlitev, popolna servisna zgodovina, Still RX 60-40 električni viličar s sledečimi podatki: Psdszfx Alopfx Afasgn - Delovne ure: 3.296 - Nosilnost: 4.000 kg - Dvižna višina: 4.650 mm - Gradbena višina: 2.350 mm - Leto proizvodnje: 2012 STILL 4,0-tonski električni viličar s polno kabino, dobro baterijo, dobrimi pnevmatikami, triplex dvižnim stebrom s popolnim prostim dvigom, bočnim pomikom, 4. ventilom, upravljanjem s štirimi ročicami, razsvetljavo skladno s cestno-prometnimi predpisi, dolžina vilic 1.500 mm, polnilnik. Cena vključuje servis po navodilih proizvajalca STILL in veljaven UVV pregled ob prodaji. Na željo so možne naslednje opcije: - dodatna priključna oprema (nastavljivi nosilec vilic, rotator ipd.; doplačilo na zahtevo) - druga dolžina vilic (brez doplačila) - črne namesto belih pnevmatik (brez doplačila) Ogled, predstavitev in testna vožnja so možni po predhodnem telefonskem dogovoru. Prodaja izključno podjetjem, vmesna prodaja, napake in tipkarske napake pridržane. Vaš novi viličar vam lahko ugodno dostavimo z lastnim nizkopodnim priklopnikom (stroški prevoza po dogovoru). Več informacij o nas in dodatne ponudbe najdete na naši spletni strani.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: M100037, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, premer orodja: 45 mm, nosilec vretena: MK 4, globina vrtanja: 250 mm, vrsta nastavitve višine: mehanski, vrsta aktuacije: mehanski, največja hitrost vrtenja: 2.650 obr/min, vrtljajska hitrost (min.): 30 obr/min, skupna širina: 900 mm, skupna dolžina: 1.900 mm, skupna višina: 2.200 mm, širina mize: 760 mm, dolžina mize: 1.120 mm, skupna masa: 1.800 kg, leto zadnje generalne obnove: 2026, Oprema: CE označba, Radialni vrtalni stroj s konzolno roko CARIMATI CTU 40/45 x 1000 v odličnem splošnem stanju, delujoč, preizkušen in pripravljen za delo. Glavne značilnosti: zmogljivost vrtanja 45 mm Morse stožec MK4 hitrost vretena 30–2650 vrt/min avtomatska pomikanja 0,05–0,3 mm/obrat hod vretena 250 mm premik vozička po vodilu 1000 mm napajanje 400V trifazno vključno s kocko, primežem in hitromenjalnim vretenom zaklepanje stebra in glave Pgjdpfx Afozdqklsasn hladilni sistem stroj v skladu s CE normativi Prevoz na stroške kupca. Nalaganje na tovornjak opravimo mi. Če je potrebno osebno/prilagojeno pakiranje za transport, se strošek zaračuna kupcu. Stroj se prodaja videno-kupljeno.

Leto izdelave: 2022, stanje: zelo dobro (rabljeno), Dycometal Model: CCK -40/1500T Climatic chamber, water-cooled Volume: 1,500 liters Internal dimensions: height 1,000 mm, width 1,000 mm, depth 1,500 mm External dimensions: height 2,200 mm, width 1,293 mm, depth 3,400 mm Thermal test Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5°C to 1.5°C Climatic test temperature range: +10°C to +90°C Relative humidity range: 10% to 98% RH Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Condenser: water-cooled Pgsdpfxezgr Rre Afaen Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW, 27.5 A Refrigerant: R-452A Weight: 1,120 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: novo, lastna masa: 560 kg, največja dovoljena obremenitev: 2.140 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.140 mm, višina nakladalnega prostora: 610 mm, skupna dolžina: 5.515 mm, skupna širina: 2.190 mm, skupna višina: 900 mm, Leto izdelave: 2026, Humbaur prevoznik vozil FTK 27 40 22 - nosilec z vitlom in vitlom Cena – 4.500 € z vključenim 19 % DDV, 6,4 % prevzemno provizijo in vozili dokumenti! Opis: Z novim nagibnim transporterjem vozil FTK podjetja Humbaur boste svoje vozilo prevažali udobno in varno. FTK ponuja prednosti nagibnih prikolic za vozila tudi v kompaktnem razredu. Idealen za servise za popravilo vozil ali zasebne uporabnike za prevoz manjših vozil, npr. Smart ali VW Golf. Novi Humbaur FTK prinaša vse prednosti nagibnih transporterjev vozil – prvič tudi v kompaktni izvedbi. Most lahko mehansko nagibate prek amortizerja, prikolico pa enostavno naložite prek rebrastih jeklenih ramp. Psdpfx Afozdcpbsajgn Vitel in nagibna hidravlika dodatno olajšata nakladanje. Štiri različice z nosilnostjo do dveh ton in različnimi merami vam omogočajo, da izberete prilagojen in ugoden model. Premišljena in stabilna konstrukcija zagotavlja optimalno izrabo nakladalne površine in nizek nakladalni kot. Pocinkani sestavni deli in številne možnosti pritrditve tovora potrjujejo kakovost v podrobnostih od Humbaurja. Tehnični podatki: Tip prikolice – dvoosovinka Teža – 560 kg Skupna masa – 2.700 kg Nosilnost – 2.140 kg Dolžina nakladalne površine – 4.000 mm Skupna dolžina – 5.515 mm Širina nakladalne površine – 2.140 mm Skupna širina – 2.190 mm Skupna višina – 900 mm Nakladalna višina – 610 mm Pnevmatike – 10 col Dolžina vlečne ojnice: pribl. 1.425 mm Višina sklopke: pribl. 435 mm Nagibni kot: pribl. 10° Dolžina desk: pribl. 1.380 mm Serijska oprema: Privijačeno in pocinkano podvozje Pocinkana nagibna ploščad Nagibna ploščad mehansko nagibna prek amortizerja Jeklene nakladalne rampe V-ojnica, potopno vroče cinkana 13-polni vtič in vzvratne luči Opora za prikolico

Stanje: rabljeno, TECHNICAL DATA - Distance between centres: 1000 mm - Centre height: 175 mm - Travels (Z/X): 1050 x 275 mm - Max. feed rates (Z/X): 10 x 5 m/min - Grinding spindle stock type: 2 external wheels, 1 internal wheel - External left grinding wheel dimensions: 500 x 63 x 127 mm - Right grinding wheel dimensions: 400 x 63 x 127 mm - Grinding wheel motor power: 7.5 kW - Rotational speed: 1670 - 2110 rpm - Grinding spindle stock orientation: -15 to +225 ° - Resolution: 0.001 ° - Workpiece headstock taper: MT5 - Workpiece headstock rotational speed: 1 - 1027 rpm - Workpiece headstock power: 0.785 kW - Tailstock: MT3 - Quill stroke: 35 mm - Weight: 7000 kg - Hours under power: 47,959 h ACCESSORIES - Distance between centres: 1000 mm - Centre height: 175 mm - Axis travels (Z/X): 1050 x 275 mm - Max. feed rates (Z/X): 10 x 5 m/min - Grinding spindle stock type: 2 external grinding wheels, 1 internal grinding wheel - External left grinding wheel dimensions: 500 x 63 x 127 mm Pjdeuhbyqepfx Afaogn - Right grinding wheel dimensions: 400 x 63 x 127 mm - Grinding wheel motor power: 7.5 kW - Spindle speed: 1,670 - 2,110 rpm - Grinding spindle stock orientation: -15 to +225 ° - Resolution: 0.001 ° - Workpiece headstock taper: Morse type 5 - Workpiece headstock rotational speed: 1 - 1,027 rpm - Workpiece headstock power: 0.785 kW - Tailstock: Morse type 3 - Quill stroke: 35 mm - Weight: 7,000 kg - Operating hours under power: 47,959 h

Stanje: rabljeno, TEHNIČNI PODATKI - Premer palice: 40 [mm] Pedpjykb Uvofx Afaogn - Največja dolžina palice: 4200 [mm] - Največja dolžina ostanka: 150 [mm] - Čas nalaganja: 22 [sek] ELEKTRIČNA OSKRBA - Napajalna napetost: 400 [V]

Stanje: rabljeno, TECHNICAL DATA Podewpl Aijpfx Afajgn - Bar diameter: 3–20 mm - Max. bar length: 4000 mm

Stanje: rabljeno, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar passage: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes, NC-controlled - Slide unit 1.2: X and Z axes, NC-controlled - Slide unit 2.1: X and Z axes, NC-controlled - Slide unit 2.2: X and Z axes, NC-controlled - Slide unit 3.1: X and Z axes, NC-controlled Podpfxsuhantj Afasgn - Slide unit 3.2: Z axis, NC-controlled - Slide unit 4.1: X and Z axes, NC-controlled - Slide unit 4.2: Z axis, NC-controlled - Slide unit 5.1: X and Z axes, NC-controlled - Slide unit 5.2: Z axis, NC-controlled - Slide unit 6.1: Z axis, NC-controlled + SCARA axis - Slide unit 6.2: X and Z axes, NC-controlled - Slide unit 6.3: X axis, NC-controlled ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW DIMENSIONS AND WEIGHT - Footprint: 3,329 x 2,032 mm - Height: 2,654 mm - Weight: 7,100 kg OPERATING HOURS - Power-on hours: 45,965 h - Production hours: 19,065 h ACCESSORIES - Siemens 840D CNC (PL) with dual NCU - 2 CNC operating panels - 6 TOPLUS collet receivers with integrated stop - 1 counter-spindle in position 6.1 - Clamping device on counter-spindle: Röhm chuck KFD-HS 110/3 - Counter-spindle internal coolant supply - CNC options for counter-spindle / polygon turning attachment - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft, positions 1.2.3 - Preparation for 2 additional operations with electronic shaft, positions 4.5.6 - STAUBLI robot, type TX60 (6 axes) - Robot gripper, external double clamping type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps at 40 bar - Büschel oil mist extraction system - RIEDEL cooling system - ARTIS preparation

Stanje: rabljeno, TECHNICAL DATA - Product: A3 - Installed power: 8 [kW] - Product volume: 80 liters - Basket dimensions: 300 x 200 x 150 [mm] - Cooling: Water - Bath 1: Cleaning with standard filter - Bath 2: Rinsing with standard filter - 1 cleaning tank: 300 x 200 x 150 [mm] - Stepless distillation: 25 [L/h] - Dimensions (W x L x H): 1200 x 1800 x 1500 [mm] ACCESSORIES - Loading: manual Pgodpfx Ajug U R Hjfajn - Ultrasonic trays: yes - Steam degreasing: yes - Vacuum drying: yes - Cooling unit HITEMA ECA.008

Stanje: rabljeno, TECHNICAL DATA - Honing diameter: 1–12 [mm] Pgedpfx Afsug U Dtoaen - Honing length: 40 [mm] - 2 honing heads - 1 inspection head - 1 deburring head with multi-spindle head

Stanje: zelo dobro (rabljeno), Leybold Two-Stage Rotary Vane Vacuum Pump Here we offer a Leybold two-stage rotary vane vacuum pump. The TRIVAC B series are oil-sealed vacuum pumps operating on the rotary vane principle. The oil injected into the pumping chamber serves for sealing, lubrication, and cooling. Pgodpfx Aezgbvqefaon The pump body is assembled from individual components without sealing elements. These components are doweled together to facilitate easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: - Quiet operation - Vibration-free performance - Energy-efficient Energy-saving: - Low power consumption - Minimal heat emission Modern vacuum technology: - High pumping speed down to the ultimate pressure - Low ultimate pressure, even with gas ballast - High water vapor tolerance - Suitable for continuous operation up to 1000 mbar - Built-in oil pump, forced-lubricated slide bearings - Minimal air intake - High leak tightness (suitable for 4He) Technical Data: Model: TRIVAC D 40 B Intake flange: DN 40 ISO-KF Exhaust flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Effective pumping speed at 50 Hz: 40.0 m³/h Effective pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Oil capacity min.: 1.7 l max.: 2.6 l Noise level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Electrical connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection class: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Type: Trivac D 40 B Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors reserved!) Further questions can be answered by phone.