Cross-Léger nakup rabljenega (8.357)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, format saw with side carriage, in full working condition Lajdpfx Aefv Hpheh Ajk

Stanje: skoraj kot novo (rabljeno), Range (depending on lighting conditions): up to 15 m Range with laser receiver: 30 m or more Leveling accuracy over 5 m: +/- 1 mm Self-leveling range: 4° ± 0.5° Horizontal line accuracy at 5 m: ± 1.5 mm Vertical line accuracy at 3 m: ± 0.75 mm Number of laser lines: 2 Laedpfod Ecncjx Ah Ask Weight: 485 g

Leto izdelave: 2013, Stanje: rabljeno, Technical Data for Bale Opener Line for RDF, MSW, Paper, Cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of Manufacture: 2015 Number of Bales Opened: 674 Operating Time: Only 3 days, exclusively during commissioning of the entire system at new installation Opening Time: approx. 45 seconds per bale Bale Dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum Bale Weight: 2,000 kg System Discharge Height: 1,400 mm Maximum Conveyor Width: 1,200 mm Material to be Opened: RDF/MSW System Availability: 98% Noise Level of Bale Opening Line: 85 dB(A) Total Connected Load: 37 kW Rated Current: 125 A Operating Display: SIEMENS SIMATIC HMI Touch Control System: SIEMENS S7 ET200S Machine Dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of Supply: - Feed Conveyor 3,500 x 1,200 x 1,400 mm - Infeed Conveyor to Opener 1,500 x 1,200 x 1,400 mm Laodpfx Aou Tg I Djh Ask - Bale Opener (gripper with cutter) Special Equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for Short Operating Time: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The purpose of the installation was to allow municipal waste to be received, baled, wrapped, and stored in case of a plant malfunction or maintenance, until normal operation resumed. After the issue was resolved, all bales would then be opened and the waste fed back into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned and subsequently never used in regular operation. Only during initial commissioning in 2015 were 674 bales opened over three days. The system is in excellent, ready-to-use condition. Due to plant modifications, the installation area is needed for other purposes, and the complete line is therefore offered for sale. Brief Description of the Bale Opening Process: The compressed bales are placed onto the infeed conveyor from the side or rear using a forklift. For opening, the bales must be positioned with the wire or twine binding running horizontally to the conveyor; otherwise, bales must be rotated 90°. The infeed conveyor moves each bale to the cutting unit. The grippers hold the wire or twine strapping firmly. The rotating knife cuts the bale lengthwise. The gripper then returns to its initial position. The opened bale is then conveyed to the discharge chute and drops onto the subsequent conveyor system. Notes: Original price of the complete system was €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. The system has been dismantled into transportable units, stored, and is available for inspection and loading at short notice. No liability is assumed for the technical specifications or any potential errors.

Stanje: rabljeno, Valjčni transporter z verižnim prečnim transporterjem Primeren za uporabo za tračno žago. Lasdpfx Aji Sdk Sjh Ajk - Elektromotor: 1,1 kW - Elektromotor: 0,75 kW - Elektromotor: 1,1 kW

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, CNC obdelovalni center za profile, proizvajalec Stegherr, tip GLS-2, letnik pribl. 20, krmiljenje Beckhoff tip CP3919, serijska št. 00006sem. Prosta prodaja. Prosimo, pošljite nam svojo ponudbo. Laodpfx Ahox Natco Aek

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj),

Stanje: novo, Leto izdelave: 2026, Forstner COILFARM The COILFARM from FORSTNER is a new, innovative, and adaptable solution to meet the changing market demand for rapid and flexible availability of various materials in different thicknesses and color variants. This is one of the main reasons why we developed the COILFARM for sheet metal processing companies in both craft and industrial sectors. Key Advantages High Capacity: With a capacity of up to 75 coils, a wide range of different materials, gauges, and color variants can be accessed immediately and without delay. This makes it effortless to handle even larger ongoing projects simultaneously. Quick Coil Change: Thanks to a sophisticated system, coil changes are fast, straightforward, and safe. We have integrated a coil buffer station above the nuSLIT and a setup buffer station behind the decoiler. As a result, setup times are minimized, and overall production efficiency is significantly increased. Easy Loading Process: The well-thought-out machine design makes loading the COILFARM very easy. The expanding mandrels can be simply attached to the coil, and loading via the setup station boosts your productivity. Maximum Precision: The integrated zero-line alignment (fixed edge) ensures perfect material alignment every time. Errors and scrap are thus reduced to a minimum. Uncompromising Quality: Products from the CIDAN Machinery Group are renowned for their unwavering commitment to quality. In the development of COILFARM, our aim was to combine form and function to the highest standard. 3-Minute Changeover Time: Stop and rewind, bring the current coil to the transfer position behind the decoiler, pick up the next coil above the nuSLIT, insert first and then set it down on the decoiler – and production is back to full speed. Technical Data Coil weight 5,000 kg Min. coil width 400 mm Max. coil width 1,270 mm Max. coil diameter 1,100 mm Coil inner diameter 380 – 550 mm Optional coil diameter 460 – 630 mm Lasdpfx Aex Ngumsh Aok Slitting capacity (with nuSLIT) 1.00 mm steel at 5 pairs of knives Cut-to-length capacity (with nuSLIT) 1.0 mm steel Steel (400 N/mm²) 1.00 mm at 5 pairs of knives Stainless steel (600 N/mm²) 0.80 mm at 5 pairs of knives Aluminum (300 N/mm²) 1.20 mm at 5 pairs of knives Maximum storage capacity 75 coils (at maximum diameter)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Priključni podatki: Enofazni izmenični tok 50 ... 60 Hz Preklopna napetost 200/220/240 V ± 10% Poraba energije: 110 W Oddaja toplote: 95 kcal/h Lasdpfxjxmhhys Ah Ajk Uporaba: višina pred-tiska 3…12 1/2" // širina pred-tiska 148…470 mm Gramatura papirja: enoslojne 45…170 g/m2 // večslojne sklope 125 ... 300 g/m2 Višina sklada do pribl. 300 mm Stroj je deloval v proizvodnji skupaj z MICRO-FORMS LABELLER 18S (lepi nalepke na pole) // Ref. št.: 40016.25

Stanje: dober (rabljeno), GUK FA 49/4 zgibalni stroj + GUK FA 49/4 prečni zgibalni modul Stroj je v zelo dobrem tehničnem in vizualnem stanju. Format: 490x690 mm. Lsdpex Ncu Nefx Ah Ajak Hitrost zgibanja: 30–160 m/min Oprema: 4 vzporedne kasete na glavni enoti 4 pravokotne kasete na prečni zgibalni enoti Prva kaseta podaljšana. Prilagoditve kasete so na številčnici. Gladko nastavljiva hitrost. Števec z možnostjo porcij in prikazom hitrosti zgibanja. Rietschle kompresor. Orodni valj z veliko število pripomočkov za perforacijo, biganje in rezanje. Povišani pokrovi za zvočno izolacijo. Podajanje s pomočjo vakuuma. Mobilni izhod (prosto stoječa izhodna enota) z gladkim upravljanjem hitrosti. Popolna dokumentacija. Obsežen nabor dodatne opreme.

Stanje: rabljeno, - d1 = 35 mm, Lajdpfxslkclks Ah Ask - d2 = 27 mm (across flats), - overall length: 195 mm.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 700 mm, pogonska enota žage: 15.000 W, moč servomotorja: 11.000 W, Stroj popolnoma obnovljen / kot nov z novo električno napeljavo nov Siemens S7 krmilni sistem Zaključek po naročilu Avtomatska kapovalka z zaznavanjem krede črte Leseni prerezi 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Premer žaginega lista 650/700 mm Podajalna hitrost 120 m/min Motor žage 15 kW Servo pogon SEW 11,00 kW s pretvornikom Lodev Diy Aspfx Ah Asak

Stanje: dober (rabljeno), Koda: 0252 Znamka: MA BREVETTI Model: JUNIOR 275 Pnevmatska dvojna čelilna žaga za reze 45° + 45° na obeh koncih, za okvirje in letve vseh oblik in vrst Tehnični podatki: Premer lista mm 275 F30 Največja zmogljivost rezanja: širina 70 mm - višina 90 mm Približna zmogljivost: 700/800 rezov Motorji št. 2 - vsak po 2 KM - 2800 vrt./min Napajanje V.380/50 Obratovalni tlak 6 bar Laedox Au A Nepfx Ah Ask Premer priključka za odsesavanje 100 mm Skupne dimenzije mm 850 x 700 x 1400 Teža kg 265

Stanje: rabljeno, Mitre saw BERG & SCHMIDT Junior 275 - used - Base frame, Mobile stand Lodpfx Aeu R S I Heh Asak ----- Technical specifications ----- Cutting height: 60 mm, Voltage: 230 V

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 560 x 500 x 580 mm Weight: 80 kg Total power requirement: 0.75 kW Dowel Cutting and Chamfering Machine FS-36 Laedpovz Hf Defx Ah Ajk - For cutting to length and chamfering dowels from 6 to 18 mm - Min. dowel length: 20 mm - Max. dowel length: 150 mm - Motor: 0.75 kW - Output: 36 pieces/min - Incl. guide bushing Ø 8 mm for dowels - Weight: 80 kg - Dimensions (L x W x H): 560 x 500 x 580 mm

Stanje: generalkompletno obnovljen (rabljeno), PALLET LINE MULTI-BLADE SAWS AND EDGERS A.COSTA, VOLLMER, ARTIGLIO, PRIMULTINI, STORTI Lsdeqag T Aopfx Ah Aoak We offer a wide range of sawmill machinery.

Stanje: rabljeno, - d1 = 30 mm - d2 = 27 mm (wrench size) - Total length: 110 mm - Available: 3 units Price per piece: €25.00 + VAT Ledpslkcg Rjfx Ah Aoak

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups Ljdpew Sy T Hsfx Ah Aeak - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: novo, Cross-cut and Mitre Circular Saw GRAULE ZS 85 N - Tiltable - Includes: - Cross-cut and mitre circular saw GRAULE ZS 85 N - tiltable - Material positioning shoulder made of laminated wood - without machine stand and saw blade - Includes: - GRAULE machine stand suitable for model ZS 85 N up to ZS 170 Includes: Ljdju R Sycepfx Ah Aoak - GRAULE feed roller conveyor type RO complete with support legs and connection brackets Ball-bearing plastic rollers, Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for conveyor height 885 +/- 10 mm Includes: - GRAULE roller conveyor / length stop, type RLK with scale and rear-folding material stop. Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for conveyor height 885 +/- 10 mm - New exhibition machine -

Stanje: novo, Leto izdelave: 2025, Dimenzije (dolžina/širina/višina) 1200x930x1080 mm Teža 390 kg Skupna priključna moč 1,5 kW Stroj za krajšanje in posnemanje čepov DCC-220 - Delovno področje 6 - 18 mm - Najmanjša dolžina čepa 6 - 18 mm - Največja dolžina čepa 150 mm - Delovna zmogljivost ca. 7.500 - 15.000 kosov / h Laodpjvz Et Hjfx Ah Ask - Podajalna hitrost brezstopenjsko nastavljiva - Pogonski motor 0,37 kW / 750 vrt/min - Rezkalni motor 0,37 kW / 2.900 vrt/min - Žagin motor 0,37 kW / 2.900 vrt/min - Motor za posnemanje 0,37 kW / 2.900 vrt/min - Rezkalna vretena 1.450 vrt/min - Žagina vretena 2.900 vrt/min - Vretena posnemalnega rezkalnika 1.450 vrt/min - Premer odvoda 3 x 80 mm - Potreba po zraku ca. 900 m3/h - Podnožje iz sive litine - Vključno z vodilom za čep po izbiri premera - Dimenzije L=1.200, Š=930, V=1.080 mm - Teža 390 kg

Stanje: rabljeno, Leto izdelave: 2022, Optimizacijska čelilna žaga Weinig Tip OptiCut 260 za avtomatsko čeljenje lesa glede na napake (fluorescenčna kreda) in dolžine. Posebna merilna postaja zazna dolžine in označene napake. Žagin list ø: 500 mm Vhodna dolžina: 400 – 6300 mm Lodpfsx Ditfox Ah Ajak Vhodna debelina: 12 – 80 mm Podajalna hitrost: maks. 250 m/min Cikel: pribl. 1 sek Motor žage: 7,5 kW Označevalna postaja: 5.000 mm Izstopni trak: 7,5 m Krmiljenje: OptiCom Pro

Stanje: novo, Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - Included: - Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - - without machine stand and saw blade - Included: - Machine Stand GRAULE for type ZS 135 N and ZS 170 N Included: - Infeed Roller Conveyor GRAULE type RO Lasdpfx Aheu R Syps Aok complete with support legs and connecting angle Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm Included: - Roller Conveyor/Length Stop GRAULE type RLK with scale and material stop foldable to the rear. Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm - new showroom machine -

Stanje: rabljeno, - d1 = 30 mm, Ljdslkcgijpfx Ah Aoak - d2 = 27 mm (wrench size), - Total length: 215 mm, - Available: 2 pieces. Price per unit: €45.00 + VAT.

Stanje: rabljeno, d1: 35 mm Laedpjlkclgjfx Ah Ajk d2: 27 mm (wrench size) Overall length: 115 mm - Available: 2 pcs, Price per piece: €25.00 + VAT

Stanje: rabljeno, Leto izdelave: 2004, Avtomatska optimizacijska čelilna žaga (drsna žaga) Dimter tip OptiCut 700 za čeljenje zelo širokega lesa glede na napake (fluorescenčna kreda) in dolžine. Višina reza: maks. 120 mm Širina reza: maks. 700 mm Vhodna dolžina: maks. 5.500 mm Premer žaginega lista: maks. 700 mm Lodpfx Ahsx Eblvo Aeak