Cross-Léger nakup rabljenega (5.696)

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GSVW-3080-1250-1-F, Cross-flow vacuum dryer with 31.68 m³ capacity The chamber accommodates 1 package with a width of 1.20 m, 3 packages stacked up to a height of 0.80 m on 0.10 m thick stacking timbers, with a maximum wood length of 16.0 m plus 0.5 m clearance. The chamber holds a net volume of approx. 19 m³ of sawn timber with a wood thickness of 50 mm and a stacking strip thickness of 24 mm. Usable space: Width 1.20 m, Height 2.70 m, Length 12.0 m Technology (see detailed performance description under Documents) - Stainless steel cylinder with 80 mm thick, resin-bonded rock wool insulation and a ventilated outer cladding made of aluminium trapezoidal sheet. - One vacuum door with special locking mechanism for easy end loading with walk-in carts. - A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025). - Airflow through the stacks is ensured by 12 fans rated at 1.5 kW each in delta configuration. On average, power consumption per fan is only approx. 0.5 kW when under vacuum. - Hot water heat exchanger installed for up to 98 kW at a supply temperature of 90°C - Electrical connection: 47 amps at 3 x 400 V / 50 Hz. Cgsdpswrb Nkefx Afxon - Excess moisture is condensed via air heat exchangers. - Chamber humidity can be added as needed via a hot-water heated evaporator tank. - The chamber operates fully automatically. You only need to input the wood type, wood thickness, and desired final moisture content. - MB4000 V control system including operator panel - 10 wood moisture measuring points, as well as climate and temperature sensors - Removal rails must be newly ordered as the existing ones are embedded in concrete. Price is ex works and net, payable before dismantling of the system. The buyer is responsible for dismantling and removal. Dismantling is not included in the price.

Leto izdelave: 2023, Stanje: novo, TNDG manual positioner with handwheel and pneumatic clamping. Measurement display via linear encoder and digital readout. Available in lengths of 3, 4, 6, and 8 meters Cgodpfx Ajpa Nzyjfxon Working height: 800-1050 mm Permissible load: 70 kg per meter Roller dimensions: 40 x 300 mm PACKAGING AND DIMENSIONS: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg)

Stanje: novo, Optimum OPTIdrill DH 40CT Column Gear Drilling Machine with Cross Table 3034349 The versatile machines for milling and drilling. TECHNICAL DATA General Information Drawbar M 16 Dimensions and Weight Column diameter: 115 mm Length (approx.): 1060 mm Width/Depth (approx.): 745 mm Height (approx.): 2090 mm Net weight (approx.): 370 kg Drilling Capacity Drilling capacity in steel (S235JR): 32 mm Continuous drilling capacity in steel (S235JR): 25 mm Thread cutting in steel (S235JR): M 16 Max. shank milling cutter size: 25 mm Max. face mill size: 76 mm Drilling Table Drilling table working surface length: 730 mm Drilling table working surface width: 210 mm Drilling table T-slot size: 14 mm Number of drilling table T-slots: 3 Drilling table T-slot spacing: 63 mm Drilling table load capacity: 50 kg Max. spindle-to-table distance: 600 mm Speed Range Spindle speed range: 95–3200 rpm Number of speed ranges: 2 x 6 steps Electrical Data Drive motor power: 1.1 / 1.5 kW Connection voltage: 400 V Line frequency: 50 Hz Machine Base Max. spindle-to-base distance: 1180 mm Cgjdpfx Afjt N Rkpoxsn Base working surface length: 495 mm Base working surface width: 375 mm Base T-slot size: 14 mm Number of base T-slots: 2 Base T-slot spacing: 230 mm Base length: 670 mm Base width: 470 mm Spindle Quill stroke: 120 mm Quill diameter: 75 mm Spindle taper: MT 4 Throat: 280 mm Drilling head rotation: 360° Drilling head tilt: 45° Quill feed: manual Drilling head height adjustment: 260 mm Travel Manual X-axis travel: 480 mm Manual Y-axis travel: 180 mm Manual Z-axis travel: 560 mm SCOPE OF DELIVERY Key-type drill chuck 1–13 mm / B16 T-slot nuts Adapter MT 4–MT 3 MT 4 / B16 arbor Service tools

Stanje: rabljeno, Križna miza z ročnimi kolesi Velikost mize: 300 x 200 mm Cgsdpjxf Uxisfx Afxen Pomik v X: 160 mm Pomik v Y: 240 mm Gradbena višina: 141 mm - Navoj vretena: 4 mm (4 mm pomika na obrat ročnika) - Zasuk 340° - Lastovičji rep vodilo - 2x T-utorja na vpenjalni površini 14 mm Teža: 38 kg Dobro stanje

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, teža tuljave: 15.000 kg, maks. debelina aluminijaste pločevine: 4 mm, najv. debelina jeklene pločevine: 4 mm, najv. debelina bakrene pločevine: 4 mm, notranji premer: 508 mm, najv. debelina pločevine: 4 mm, zunanji premer: 1.800 mm, širina tuljave: 1.600 mm, število rezil: 4, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, premer ravnalnega valja: 75 mm, nosilnost: 15.000 kg, potrebna širina: 3.500 mm, zahteva za prostor dolžina: 12.000 mm, potrebna višina: 3.500 mm, premer napajalnega valja: 250 mm, število podajalnih valjev: 2, CTL Demaq Evo. Nuevo, en stock. Bobina hasta 15 toneladas D1800, 20-24" nominal. Carro portabobinas hidráulico. 2 rodillos de arrastre y 11 rodillos enderezadores. Endurecidos y cromados. Servo Nidec en el enderezador y desenrollador. 4 cuchillas longitudinales, eje (HC) 230 mm, cuchillas 300 mm. Cizalla transversal. Codpfx Aou Ey D Sjfxegn Fabricado íntegramente en España en nuestras instalaciones. Opcionales otros dispositivos y configuraciones. La máquina Demaq SPL más avanzada. 2 unidades disponibles.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Technical Specifications: - Motor power: 2.2 kW S1 - Max. saw blade diameter: 350 mm - Saw blade bore: 30 mm - Cutting time per stroke: 1.5 sec. - Saw spindle speed: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction port: 2x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 200 kg - Required airflow: 1000 m³/h - Voltage: 400 V / 50 Hz, 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 Cgedpfx Aefhbuyefxjn 90 x 180 100 x 125 Standard Equipment: - Saw blade feed with pneumatic drive - Automatic motor brake - Set of operating wrenches - Emergency stop mushroom switch - Feed speed regulator for saw blade - Fixed vertical safety guard - Upper safety pressure device (pneumatic safety cover) - Minimum extraction speed: 28 m/sec - Colours: Base frame light grey RAL 7035, doors tele grey RAL 7046, safety guard and cover zinc yellow RAL 1018 - Incl. HM (carbide-tipped) circular saw blade for wood 350x3.5x2.4x30mm Z72

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 89257, Žaga GreCon Dimter Opticut 704 L iz leta 1999. Stroj odstranjen iz obratovalne linije. Brez izmetnikov na izhodu, potreben ponoven vklop ali retrofit. Na ogled v naših prostorih. Csdpjtvahljfx Afxegn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 260105, premer žaginega lista: 800 mm, skupna masa: 2.960 kg, dolžina mize: 700 mm, Oprema: CE označba, TEHNIČNI PODATKI Min. premer žaginega lista: 790 mm Maks. premer žaginega lista: 800 mm Premer osi žaginega lista: 40 mm Dolžina vstopne mize: 700 mm Dolžina izhodne mize: 700 mm PODROBNOSTI O STROJU Glavna moč motorja: 15,0 kW Dimenzije in teža Dimenzije (D x Š x V): 3.600 x 2.550 x 2.100 mm Teža: 2.960 kg OPREMA CE označevanje Csdpfx Aoxq Au Ajfxogn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item No.: SK-K-24001 Cjdpfx Afewya Syjxegn DIMTER cross-cut saw line comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.

Stanje: rabljeno, Automatic Power Hacksaw SILISTRA / BULMAK Type OH 254 Automatic hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Cutting speed 40 - 50 - 63 - 80 - 100 - 125 strokes/min Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-changeable Power supply 380 Volt, 50 Hz - Straight cut automatic machine for 90° cuts only - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and raising - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electric contact stop), approx. 800 mm - Gripper feed with electric feed drive via leadscrew for automatic material feed - Hydraulic material clamping with stepless clamping force adjustment Cgodpjwb Hxvsfx Afxjn - Coolant device integrated in the machine base - Electrical control cabinet next to the machine Dimensions (L x W x H) 2000 x 1800 x 1400 mm Weight approx. 900 kg

Stanje: rabljeno, Horizontal mitre band saw in pivoting bow design JAESPA Type W 320 G Serial No. 18793 / 99 Year of manufacture: 1999 Cutting capacity at 90° (round): Ø 320 mm Cutting performance at 90° (square): 320 x 320 mm Cutting capacity at 90° (flat): 460 x 200 mm Cutting capacity at 45° (round): Ø 290 mm Cutting capacity at 45° (flat): 290 x 220 mm Cutting performance at 45° (square): 240 x 240 mm Cutting capacity at 30° (round): Ø 200 mm Cutting performance at 30° (square): 200 x 200 mm Cutting capacity at 30° (flat): 220 x 200 mm Saw blade dimensions: 4120 x 27 x 0.9 mm Blade speed: approx. 50 m/min Material infeed height: approx. 630 mm Saw motor power: 1.5 kW Electrical connection: 400 Volt, 50 Hz - Quick mitre adjustment via pivoting saw bow with rotary table and clamping - Infinitely variable mitre cuts from 30° to 90° - Hydraulic saw bow movement with rapid approach and return after cut completion - Material height detection via limit switch - Quick-adjust vise with eccentric clamping - Coolant system integrated in machine base Cgsdpfxswwaz Aj Afxsn - Emergency stop mushroom pushbutton Space requirement (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 3940 x 850 x 1350 mm Weight: 410 kg Total power requirement: 5.5 kW Cgjdpfovz Eytsx Afxen Under-table crosscut saw CUTMAX 450 - Cutting height: 125 x 125 mm / 100 x 250 mm - Table dimensions: 660 x 700 mm - Saw blade diameter: 450 mm - Motor: 5.5 kW / 400 V - Speed: 3600 rpm - Cutting speed: up to 45 cycles/min - Compressed air connection: 8 bar - Extraction port: Ø 120 mm - Safety two-hand control - CE conformity - Includes 1.5 m roller conveyor left and right - Dimensions: L=940, W=850, H=1350 mm - Weight: 410 kg

Stanje: novo, - NEW - Description: - Sturdy steel welded construction - Workpiece is automatically clamped by the saw blade cover during each cut - The saw blade is raised pneumatically and retracts into the machine body after each cut - Saw blade feed rate infinitely adjustable via set screw at the front of the machine - Effective chip and reach-in protection made of plexiglass - High operational safety due to two-hand operation - Supplied as standard with 1m roller conveyor on both left and right sides of the machine, plus material stop with scale - Saw blade change via large side door Technical data: General Information Saw blade speed: 3000 rpm Saw blade diameter: 500 mm Saw blade bore: 30 mm Saw blade thickness: 4 mm Mitre angle: None Extraction nozzle diameter: 125 mm Sound pressure level: 89 dB(A) Dimensions and Weights Length (product): approx. 3000 mm Width/Depth (product): approx. 1600 mm Height (product): approx. 1500 mm Weight (net): approx. 700 kg Electrical Data Drive motor power: 6 kW Motor speed: 2900 rpm Total current consumption: 15.5 A Connection voltage: 400 V Mains frequency: 50 – 60 Hz Standards and Approvals EMC class: A Pneumatic Connection Air consumption: approx. 33 l/min Operating pressure: 6 – 8 bar Cutting ranges Cutting capacity 0° (square) solid material: 160 x 160 mm Cutting capacity 0° (rectangular) solid material: 400 x 100 mm Cgsdpsvwflusfx Afxon Scope of delivery: - 1 m infeed roller conveyor, right side of the machine - 1 m outfeed roller conveyor including manual material stop with scale, left side of the machine Art.-No.: 5651500

Stanje: skoraj kot novo (rabljeno), Vollmechanisierte Linie zum Auftrennen und Schneiden (Masterflex+Paul) bestehend aus: - Querstapelförderer für 2 Pakete - Automatische Abstapel- und Vereinzelungsanlage mit Leistenrückführung und integriertem Förderband - Querstapelförderer für die stückweise Zuführung (rund) - Wagentrolleys auf Schienen zur Rundholz-Zuführung - Kreissäge Masterflex mit 4 verstellbaren Sägeblättern, Achsabstand, freier Durchlassbreite 1.000 mm, Schnitthöhe 100 mm Cedpfx Aekt I Uyofxjgn - 2 Motoren je 50 kW, 4 elektromotorische Verstellungen steuerbar per Joystick, inklusive Steuerpult - Holzabzugsband mit Reststückabscheider (Kanten und Besäumungen) - Abfallförderband mit automatischer Pendel-Abfallkappsäge - Teile-Rücklaufband mit Rückführung zum Bediener zur Nachbearbeitung - Querstapelförderer mit Vereinzelung zur Beschickung des Optimierers Paul - Optimierer Paul, Durchlassbreite 1.000 mm, Schnitthöhe 100 mm, ausgestattet mit Markierstation für Fehler, mit Laser (ohne Kreide) - Sortierstrecke hinter dem Optimierer mit 20 Auswerfern. Die Anlage befindet sich in einem sehr guten Betriebszustand.

Stanje: rabljeno, Machine Crossover with Platform (Bridge) 1900-750-2500 RA2414 Technical Specifications: Manufacturer: Munk Günzburger Steigtechnik Model: Machine Crossover with Platform Condition: Very good (used) Overall dimensions: 1900-750-2500 mm (W x D x H incl. handrail) Step dimensions: 85 x 600 x 45 mm Csdpewpymisfx Afxegn Step/riser height: 230 mm Platform dimensions: 800 x 650 mm Platform height: 1350 mm lower edge / 1420 mm upper edge Ascents: 6 (5 steps + platform per side) Maximum working height: 3450 mm Maximum load capacity: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Transnorm Rollenförderer Ausschleusförderer 1800-600-550 RA2429 Hersteller: Transnorm Rollenbreite (RB): 550, Stahlrollen Nenn-/Außenbreite (NB): 600 mm Länge: 1800 mm Rahmenbauhöhe: 130 mm Profil / 300 mm Ausschleußer Rollendurchmesser: 50 mm Pneumatische Ansteuerung der Rollen 4 Reihen Ausschleusrollen Inklusive Spannstation für Riemen Ohne Antriebsstation, dafür bitte kontaktieren Cjdpow R Hkcjfx Afxjgn Lieferumfang: ohne Stützen (bei Bedarf bitte anfragen) Für eine individuelle, fachmännische Beratung setzen Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf, von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 98125446, premer žaginega lista: 500 mm, največja višina reza: 75 mm, natančnost pozicioniranja: 1 mm, največja širina rezanja: 180 mm, CNC popolnoma optimizirana prečna krožna žaga PAUL 11MKL za mehki in trdi les. Linija vključuje: vhodni transporter dolžine 11.525 mm, dvostranska miza za označevanje napak v lesu, merilna postaja z luminiscenco in svetlobno pregrado za zaznavanje začetka in konca lesa, žagalna postaja in izhodni transporter – sortirna linija dolžine 11.500 mm s 5 stranskimi preklopniki na sortirno mizo. Vhodna dolžina lesa: 2000–6000 mm Širina lesa: 30–180 mm Debelina lesa: 6–75 mm Minimalni presek: 30x15 mm ali 45x6 mm Cjdpexrr S Hjfx Afxogn Maksimalni presek: 130x75 mm ali 180x45 mm Premer žaginega lista: 500 mm Moč motorja žage: 5,5 kW, žagini hod pnevmatski, cikel žage 0,4 s Hitrost podajanja maks. 200 m/min Poraba energije: 11,4 kW Upravljalna programska oprema: CNC MAXI 5 Premium Linija je v popolnoma delujočem stanju.

Stanje: novo, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle taper ----- MT4 Cross table ----- 600 x 190 mm Base ----- 650 x 450 mm T-slot diameter ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - base ----- 1180 mm Weight ----- 390 kg INCLUDES * LED work lamp Cgjdpfxsq E N Uxe Afxen * Coolant system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools

Stanje: rabljeno, Cross table with mounted rotary table and stepper motor drive Rotary table, indexing device Precision positioning systems UHL Cross table UHL type KT5-NSOC Serial No. 0008002 Table size: 145 x 145 mm Overall height: 62 mm Travel distance: 50 mm per axis Straightness / flatness: 5 μm - Each axis driven by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 200 x 200 x 62 mm Very good condition Rotary table, turntable UHL type B80 DT As indexing device Serial No. 00080002 Rotary table diameter: Ø 74 mm Cgodpfew E Nw Ajx Afxon Overall height: 40 mm - Driven by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (rotary table) L x W x H: 92 x 80 x 40 mm Dimensions with mounted rotary table L x W x H: 200 x 200 x 102 mm Weight: approx. 3 kg Very good condition

Stanje: rabljeno, Mitre crosscut saw for aluminium (special-purpose machine construction with 4 servo motors) Circular saw, mitre saw, longitudinal cutting saw Year of manufacture: 2002 Saw blade diameter: 500 mm Cutting capacity at 90° Round: Ø 180 mm Rectangular: 350 x 140 mm (via longitudinal cut) Cutting capacity at 45° Round: Ø 180 mm Rectangular: 350 x 100 mm (via longitudinal cut) Guide rail length (base frame): 1100 mm Travel on base frame (forward-backward): 650 mm Travel on column (up-down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Controlled longitudinal cutting motion - Controlled saw blade height adjustment - Controlled mitre cut via swivelling saw aggregate - Controlled mitre cut via tilting saw aggregate - Swivelling and tilting of the saw via INDRAMAT servo motors with precision gearbox (Motors: MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Vertical axis movement via INDRAMAT servo motors and ball screw spindles Cjdsdzp T Dspfx Afxsgn (Motor: MKDO41B-144-KP1-KN) - A total of 4 Indramat servo motors installed - Very high-quality German machine construction Space requirement (L x W x H): 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition The unit comes from a special-purpose machine for specific products. All other components and electrical parts necessary for building a new special-purpose machine are also available.

Leto izdelave: 2012, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical data Cgsdpfx Afjv Tzq Ejxsn Cutting capacity: Sheet: 660 x 2560 mm

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2024, Funkcionalnost: omejena funkcionalnost, dolžina podajanja os X: 4.000 mm, dolžina pomika po osi Y: 5.200 mm, hitrost pomika os X: 35 m/min, delovna širina: 400 mm, premer žaginega lista: 450 mm, vhodna napetost: 400 V, EXPORT Automatic Cross-Cut Saw feeding length 4,000 mm saw blade Ø450 mm cutting width 400 mm cutting height 120 mm 9.5 kW saw motor 1.5 kW feed servo motor infeed table 5,200 mm outfeed 3,000 mm Csdpfxsw Adnds Afxsgn For more information, please contact us, preferably by phone.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, A dismantled Autefa crosslapper is available. Working width: 3000 mm, working speed: 60 m/min. An on-site inspection is possible. Cgjdpowwvw Tefx Afxon

Stanje: rabljeno, Leto izdelave: 2018, Glass dimensions: Cgodpfx Aoww Ih Djfxjn Max. glass width: 1200 mm Max. glass length: 1200 mm Max. glass thickness: 12 mm Min. glass width: 150 mm Min. glass length: 300 mm Min. glass thickness: 3 mm Silicon carbide or diamond belt size: 3350 mm long and 100 mm wide Electrical connection values: 400 V, 50/60 Hz, 3-phase 13 kW / 23.5 A Max. machine height: 1900 mm Max. machine depth: approx. 2000 mm Max. machine width: 3250 mm Condition: very good, used

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), Working width: 900 mm, Length: 2,600 mm, Width: 2,600 mm, Height: 2,000 mm, Weight: 1.8 t, Operating hours: 5,866 h. Includes wet suction system. Documentation and maintenance reports available. On-site inspection possible. Codjuzlg Depfx Afxjgn