Brian Beckum Meso Žaga nakup rabljenega (4.415)

Stanje: novo, Leto izdelave: 2023, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, največja višina reza: 150 mm, BERG+SCHMID Double Mitre Bandsaw GBS 250 Super AutoCut Cutting speed: 18–110 rpm • Mitre cuts: 60° left / 45° right • Quick-release vice, adjustable • Heavy-duty vice and cast iron machine base • Ball-bearing turntable • Hydraulic brake cylinder • Large, heavy-duty material support • Automatic coolant system • Worm gear drive running in an oil bath • Fully enclosed saw frame • Adjustable ball bearings • Tool compartment – base with door • Cut monitoring via ammeter • Variable cutting pressure feed regulator Ihedpfx Afer Ik Sqo Tst • Support roller (infeed side) • Machine base (supplied dismantled) GBS 250 Super AutoCut 3-Step System: I. Automatic lowering of the saw frame via hydraulic cylinder, stepless feed adjustment, with end switch at end of cut II. Rapid lowering mode for the saw frame up to the workpiece, then automatic switch to normal cutting feed (e.g., for marking) III. Hydraulic cylinder functions as brake cylinder: a) Manual mode (e.g., for notching) or b) Lowering while stationary Saw blade dimensions: 2765x27x0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication systems, etc., available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, 2 speeds 35/75 m/min Saw band speed: 15–150 m/min Saw band dimensions: 4200 x 34 x 1.1 mm Cutting capacity at 90° round: 325 mm Cutting capacity at 90° flat: 500 x 300 mm Cutting capacity at 45° right, round: 300 mm Cutting capacity at 45° right, flat: 300 x 300 mm Cutting capacity at 30° right, round: 200 mm Cutting capacity at 30° right, flat: 200 x 200 mm Cutting capacity at 45° left, round: 300 mm Cutting capacity at 45° left, flat: 300 x 300 mm Minimum remnant length without bundle clamping – manual: 85 mm Minimum remnant length with bundle clamping – manual: 260 mm Smallest diameter: 5 mm Working height: 750 mm Total power requirement: 3.0 kW Dimensions: 1,450 x 2,200 x 1,400 mm Equipment/Accessories: - Rapid mitre adjustment from 30°–150°, stepless, with digital mitre display accurate to 0.1° - Quick-release material clamping: At every saw frame angle, material is clamped parallel at 90° - MEBA high-performance package "HSS" version – hydraulic lifting and lowering of the saw frame and hydraulic clamping of the workpiece Stepless hydraulic adjustment of cutting pressure and feed rate Lowering speed display via scale; cutting pressure display via manometer Saw frame rapid descent to material edge via push button - Frequency-controlled AC drive 15–150 m/min – 3 kW - Hydraulic full-stroke material clamping - Machine base with chip collecting tray - Saw band drive with automatic end stop - Precision carbide roller guides for saw blade, with saw band brush - Complete coolant system with electric immersion pump Isdox Sq Tfjpfx Af Teht - 1 saw band mounted on the machine, 4–6 TPI

Stanje: novo, Mitre pásu: 2950x27x0,9 mm 2 rýchlosti rezania: 36/72 m/min Šírka zveráku: 285 mm Rezné rozmery pri 90 stupňoch: - Kruhové: 250 mm - Štvorcové: 230 mm - Ploché: 280x200 mm Rezné rozmery pri 45 stupňoch: - Kruhové: 190 mm - Štvorcové: 180 mm - Ploché: 180x180 mm Rezné rozmery pri 60 stupňoch: Ihjdjh Dmh Hopfx Af Tet - Kruhové: 120 mm - Štvorcové: 110 mm - Ploché: 110x110 mm Celkový príkon: 1,5/1,8 kW Hmotnosť: 375 kg Rozmery: 1700x1000x1650 mm Vybavenie: - S poloautomatickým spúšťaním ramena - Systém CUT CONTROL umožňuje poloautomatické spúšťanie pílového oblúka vlastnou hmotnosťou pílového rámu - Rýchlosť spúšťania je plynule nastaviteľná. Jednotlivé rezy je možné vykonávať s rovnomerným posuvom

Stanje: dober (rabljeno), Leto izdelave: 2004, Nagibno žagin list 45° Dolžina vozička 2000 mm Širina reza 1270 mm Moč motorja 4,0 kW Višina reza 100 mm Premer žaginega lista 315 mm - Nastavitev z ročnim kolesom - Teža stroja 411 kg Isdpfxjx Ti Dfs Af Tsht

Leto izdelave: 1998, Stanje: dober (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 1987, nagib do 45°, hidravlično dviganje, spuščanje in vrtenje, 1000 mm desno od lista, predrezalnik, dolžina reza 3000 mm, zgornje odsesavanje, 5,5 kW Cena na lokaciji Isdpfxeyaq Nbe Af Tsht Prevoz možen ob doplačilu!

Stanje: rabljeno, Leto izdelave: 1977, Območje reza 5300 x 2200 mm Ihedpfx Aoyaq Ecsf Tet Stenska montaža Potreben prostor 6300 x 2820 mm Lesene letve Dobro ohranjeno Cena na lokaciji Prevoz možen za doplačilo!

Stanje: dober (rabljeno), Formatna krožna žaga F 90, ne nagibna, podaljšana mizna plošča, zgornje odsesavanje, dolžina vozička 2600 mm, predrezilo, 1000 mm desno od žaginega lista, dimenzije 2600 x 1400 x 1400 mm, teža 900 kg Iedpeyaq Ahefx Af Teht Cena iz lokacije Prevoz možen za doplačilo!

Stanje: rabljeno, Leto izdelave: 2019, Used machine Isdpfxowka Nte Af Toht Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow roof tooth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement reading for: - Horizontal cuts: via scale and strip cutting stop - Vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Torsion-free, freestanding machine frame Pneumatically retractable slatted frame Round bar guides vertical and horizontal Fine-adjustable flip stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-slot nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Switchgear unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the flip stop Automatically swiveling saw head Location: Flörsheim Availability: short notice

Stanje: rabljeno, težka precizna formatna krožna žaga SCM SI 550 E Class Različica: tesarstvo - mizarstvo Dolžina reza: 3200 mm Širina reza: cca 1500 mm Glavni motor: 11 kW 3 hitrosti: 2500/3000/4200 o/min Kotni prislon z dolžinsko kompenzacijo Žagin list do Ø 550 mm Električno dvigovanje in nagibanje žaginega lista z digitalnimi prikazi Iodpfxex Id Afo Af Toht Stroj iz upokojitve / prva dostava 2011 Stroj delavniško pregledan, v VRHUNSKEM STANJU Na zalogi v Liebochu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, Steel and Metal Bandsaw / Manufacturer: MÖSSNER REKORD / Type: SSF 801 / Year of manufacture: 1972 TECHNICAL DATA: - Wheel diameter: 800 mm - Throat depth: 785 mm - Max. cutting height: 720 mm - Work table: tiltable to both sides Swivel range: right approx. 45°, left approx. 10° - Saw blade length: min. 5,650 mm, max. 5,800 mm - Saw blade width: 10 / 20 mm - Infinitely variable cutting speeds: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid traverse: 4,000 m/min - Drive: 11 kW - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2.3 t - Space requirement (W x H x D): approx. 1.6 x 2.9 x 1.9 m Options / Accessories: - Fusion cutting: For fusion cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25–30 mm, the machine is equipped with a direct rapid traverse with a cutting speed of 3,000 or optionally 4,000 m/min. - File band attachment - Belt grinding attachment - Circular cutting device: The circular cutting device is mounted on the guide arm directly above the clamping plate. This allows circular saw cuts with a radius of 40–290 mm to be made. - Saw blade selection Min. cutting radii: Radius: Blade width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm Ihedpfxovx Hugj Af Tet 140 mm 16 mm The number of teeth on the saw blade depends on the material type and thickness to be cut. Steel: 5–20 mm thickness 14 TPI over 20 mm 8–10 TPI under 5 mm 18–22 TPI Cast iron: 5–20 mm 10–14 TPI over 20 mm 6–8 TPI Brass, copper, zinc: over 5 mm 8–10 TPI under 5 mm 10–14 TPI Aluminium and plastics: over 5 mm 7–10 TPI Fusion cuts: 8–14 TPI - Saw guides The machine is equipped with 2 different saw guides: * 1x precision band saw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8, and 10 mm blade widths. * 1 set of guide rollers for 20 mm blade width for processing metals and plastics at higher cutting speeds and for fusion cuts. No guarantee for completeness or accuracy of technical specifications and equipment. Subject to prior sale.

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Ijdpfxjd N H A No Af Teht Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Stanje: rabljeno, Leto izdelave: 2024, Optimum Optisaw SD500AV - Variable Band Saw with Siemens Inverter Used band saw with signs of wear Heavy-duty industrial design Quiet operation Manual or semi-automatic operation Infinitely variable saw band speed from 20–80 m/min High cutting accuracy due to vibration-free operation Mitre adjustment -45° to 60° by swivelling the entire saw bow Supplied as standard with a high-quality bi-metal saw blade Microswitch for automatic cut-off Coolant pump Ball-bearing saw band guide with carbide inserts for optimal cutting results Easy adjustment of feed descent speed via flow control valve on the control panel Large, hydraulic quick-release vice, self-closing, laterally adjustable Pressure gauge for correct saw blade tension Clearly arranged control panel Functionality in Semi-Automatic Mode Closing the vice and activating the motor Lowering the saw bow for cutting Stopping the motor and returning the saw bow to the starting position Dimensions and Weights Length approx. 2129 mm Width/depth approx. 1046 mm Height approx. 1687 mm Weight approx. 645 kg Electrical Data Rated output (motor power) 3 kW Hydraulic pump motor power 1.4 kW Ihsdpfx Aex Dzv Eef Tot Coolant pump motor power 0.1 kW Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine Data Saw band speed(s) 20 – 80 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1.1 mm Cutting angle range -45° to 60° Manual operation Hydraulic, via push button Semi-automatic operation Automatic Data Generation Real-Time Yes Data Storage Location On the device Data Access Via wireless interfaces Cutting Capacities 0° round (solid material) 355 mm 0° square (solid material) 300 mm 0° rectangle vertical (solid) 300 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle vertical (solid) 250 x 250 mm +45° round (solid material) 350 mm +45° square (solid material) 290 mm +45° rectangle vertical (solid) 290 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle vertical (solid) 180 x 220 mm Cutting Range Explanation: Cutting range determined using aluminium due to the weight of the saw bow. May vary and possibly be reduced depending on the material processed (not the cutting capacity).

Stanje: dober (rabljeno), Leto izdelave: 2005, Vzdolžna žaga v zelo dobrem stanju iz švicarskega podjetja. Največja dolžina reza: 6200 mm, največja širina reza: 420 mm, največja višina reza: 170 mm. Z laserjem in krmiljenjem. Iedpfx Afsx E Nplo Teht

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), premer žaginega lista: 600 mm, dolžina podajanja os X: 6.200 mm, skupna masa: 2.300 kg, vrsta nastavitve višine: pnevmatičen, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer odprtine diska: 80 mm, premer ekstrakcijske šobe: 120 mm, delovna višina: 900 mm, priključek za stisnjen zrak: 6 letvica, trajanje garancije: 12 meseci, The KP 900 Automatic Cross-cut Saw is an ideal solution for material preparation in pallet production and other wooden packaging products. On average, this saw can process 27–30 m³ of pallet timber or approx. 20,000 pallet blocks per 8-hour shift, depending on the cross-sectional dimensions of the processed material. The saw can be operated by one or two operators, depending on the nature of the material being handled, which is manually loaded into the machine. Basic Cutting Modes 1. Manual Mode Each cutting length is set by moving the material using the panel buttons or by entering the length value on the panel's dial. The cut is initiated by pressing a button on the display. This method is suitable for individual sequential cuts. 2. Automatic Mode a) You set a single cutting dimension for the entire length of the input material. Once the cut is initiated by the foot pedal, the entire material is automatically cut to this set size. After cutting, the automatic feeder returns to the preset input length. This mode is suitable for pallet block production and enables quick transitions between different input sizes. b) You set the desired combination of cutting sizes for the entire length of the input material. After starting the cut with the foot pedal, the machine automatically cuts the material into the selected combination of lengths. The feeder then returns to the preset input length. Up to 10 programs, each with up to 10 lengths, can be stored in the machine memory. Programs are simple to overwrite, edit, add, or delete. This mode delivers high material yield and is especially well-suited for producing cut parts for a wide range of packaging products. In automatic mode, front and rear automatic trimming can be set. In the standard configuration, the saw is LEFT-oriented, i.e., the material flow is from right to left. The automatic feeding system is part of the basic saw configuration. This is a pusher mechanism moving along a precision linear guide rail with bearings, ensuring long service life of the guide rail and highly accurate positioning of the workpiece for cutting. Integrated side and top clamps ensure secure fixing of the material during cutting, both to the worktable and the rear stop. This guarantees each cut is precise and perpendicular, with no unwanted material movement. Ijdpfeubbtkox Af Tjht A clear LCD touch display enables easy and convenient machine operation. The control elements are highly visible, ergonomic, do not strain the operator’s eyes, and provide perfect oversight. The software ensures maximum ergonomics, giving the operator complete control over the machine. The infeed worktable before cutting allows the operator to conveniently sort and prepare material, which is then fed into the machine’s loading area. This eliminates machine downtime and the need for strenuous manual material handling. The table is tilted at 8° and equipped at the end with a safety flap to prevent unintentional ejection of material beyond the operator’s reach. A basic fixed outfeed table, two meters long and partially covered by the cutting area guard, is located after the cutting zone. Operators can safely remove the cut material without risk from offcuts, shavings, or the blade. The table is also tilted at 8°.

Stanje: rabljeno, Felder Format 4 Kappa 450 panel saw Heavy-duty precision sliding table saw Scoring unit Motor power: 5.5 kW Ijdpfex H Nklex Af Toht Saw blade tiltable 90 - 46° Electric angle and height adjustment Saw blade diameter up to 450 mm Cutting length: 3200 mm Rip capacity with parallel fence: 1200 mm Year of manufacture: 2005 CE-certified version Machine from a joinery closure/retirement – in VERY GOOD CONDITION Available directly from the joinery

Stanje: dober (rabljeno), Popolna naprava za prelaganje Dolžine lesa: 3-5 m Debeline lesa: 17-140 mm Širine lesa: 75-300 mm Zmogljivost: 60-80 desk/minuto Prečni transporter Preklopna miza Iedpjyat Iyofx Af Tjht Posamezno podajanje Poravnava Možnost sortiranja Zlaganje v sklad 7 novih dvojnih letevnih magazinov (Prechtl) Prečni transporter Popolna elektrika/krmiljenje Siemens S7 (Alfha)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Večlistna žaga za obnovo obrezanih desk Iedpfjx Svxtjx Af Toht

Leto izdelave: 2023, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 001-2023, Trakasta žaga na prodaju – Kompletna dokumentacija priložena, sa svim papirima za mašinu, uključujući direktne kontakte tehničkog osoblja proizvođača. Uključena oprema: - Sistem za dovod trupaca (vidljiv na videu) - 2 potpuno nova visokokvalitetna lista - 2 seta uređaja za oštrenje lista Mogućnosti sečenja: - Opseg prečnika za sečenje: 9 – 32 cm - Mogućnost rezanja rolni do 60 cm dužine (medicinske rolne) - Dostupna opcija za nadogradnju za istovremeno sečenje 2 trupca - Približno 20 rezova u minuti - Kontrola lista i sečenja - Automatsko oštrenje lista - Podesiva dužina oštrenja - Podesiva frekvencija oštrenja (posle koliko rezova) - Podesiva brzina sečenja za sve rezove - Prvi i poslednji rez mogu se individualno usporiti ili ubrzati Iodpsxz Smvofx Af Teht - Brzina lista je podesiva - Mi radimo sa mašinom na 40% brzine i nikada nismo morali ići više - Podesiva startna tačka pokretnog stola - Svaki pojedinačni rez može se konfigurisati zasebno - Vodilice lista izrađene od visokokvalitetnih ležajeva - Širina lista: 9 cm - Debljina lista: 1,2 mm - Pokazivač zategnutosti lista - Podesiv ugao točka za list Kvalitet izrade mašine: - Izrađena od visokokvalitetnih komponenti i pouzdanih mehaničkih delova

Stanje: dober (rabljeno), Leto izdelave: 1993, TRENNJÄGER kovinska krožna žaga z možnostjo poševnega reza Z vzdolžnim prislonom! Premer žaginega lista: 400 mm Dolžina reza: 400 mm Premer reza: 130 mm Leto izdelave: 1993 Ihodpfx Afsx U Dl To Tjt 380 V Moč: 4,5 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Območje rezanja 6.300 x 2.740 x 80 mm Posebna dolžina Posebna višina Idealno za lesene konstrukcije Iodpfox Sqgfox Af Teht Digitalni merilni sistem na oseh X in Y

Leto izdelave: 1976, Stanje: zelo dobro (rabljeno), Frame Saw / Reciprocating Saw BÖGLI KHV-700 Marathon Ihodspyglispfx Af Tet Year of manufacture: 1976 75 HP, 380 V, 50 Hz Max. throat: 710 mm Stroke: 500 mm Equipped with Marathon 2 riving knife Very good condition - immediately available Location: Austria, near Feldkirch

Leto izdelave: 2001, obratovalne ure: 22.539 h, Stanje: pripravljen za uporabo (rabljen), Stroj HOLZMA HCL 11/56/22 je bil izdelan leta 2001. Omogoča največjo velikost panela 5600 × 2200 mm in dolžino reza 5600 mm za vzdolžno žaganje. Pila ima izmet rezila do 125 mm, vključuje pa obračalno postajo dimenzij 1250 × 1250 mm. Dvigalna zmogljivost znaša 10 ton, največja višina dviga pa je 1430 mm. Razmislite o priložnosti za nakup te formatne žage HOLZMA HCL 11/56/22. Za več informacij nas kontaktirajte. Področja uporabe Ihodpfxjx D Exds Af Tjt Žaganje (Les)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, največja višina reza: 160 mm, največja širina rezanja: 610 mm, moč: 0,01 kW (0,01 KM), Extreme robustness and maximum performance! The Legend_600 features a fully painted, thick, and reinforced steel construction. Isdpsfcdnlsfx Af Tjht With a 600 mm diameter saw blade, a power output of 9.2 kW, and a speed of 2,750 rpm, it is the ideal machine for anyone processing wood up to 150 mm thick and 610 mm wide.

Stanje: rabljeno, Panel saw and spindle moulder Hammer B3 Perform, very good condition, 4 kW, 2500 mm sliding table length Subject to price changes, errors, typographical and printing mistakes excepted. Isdpfovr I I Usx Af Tjht