Brane nakup rabljenega (420)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 98268994, Leto izdelave: 2020, obratovalne ure: 1.107 h, nosilnost: 1.600 kg, dvižna višina: 190 mm, vrsta goriva: električni, kapaciteta baterije: 130 Ah, napetost baterije: 24 V, dolžina vilic: 1.150 mm, lastna masa: 398 kg, Jungheinrich EJE 116 Nizko dvižni paletni viličar Letnik: 2020 Podatki: Jungheinrich EJE 116 Letnik: 2020 Prebrane delovne ure (h): 1107 Dvižna višina (mm): 190 Nosilnost (kg): 1600 Dolžina vilic (mm): 1150 Lastna teža (kg): 398 Sprednje pnevmatike: Poliuretan Zadnje pnevmatike: Poliuretan Letnik baterije: 2020 Kapaciteta baterije (Ah): 130 Napetost baterije (V): 24 Dodatna oprema: Integrirani polnilec. Hjdpfsxldhtjx Ah Dofn

Stanje: rabljeno, Električni ročno vodeni regalni viličar, spremljevalni viličar STILL tip EGV 14 Serijska št.: 330221900092 Leto izdelave: 2009 Nazivna nosilnost: 1400 kg Dvižna višina: 5475 mm Dolžina vilic: 1160 mm Skupna dolžina: 1930 mm Skupna širina: 860 mm Gradbena višina: 2330 mm Obratovalna napetost: 24 V - Triplex dvižni drog z 1830 mm prostega dviga - Prebrane obratovalne ure: 689,3 - Baterija letnik 08/2008, tip 3 PZS 315 (24V/315Ah) - Avtomatski polnilec Hfedpfx Aet H Tzfjh Den - Nov TÜV UVV pregled (doplačilo 150 EUR neto) Teža: 1440 kg Dobro stanje, baterija slabo. Doplačilo za novo baterijo = +1.250 EUR neto

Stanje: rabljeno, Leto izdelave: 2025, delovna širina: 7.500 mm, DALBO Rollomaximum 750 Kombinacija za pripravo setvene postelje Demo stroj 2025 Hjdowdkwnspfx Ah Dofn Tehnični podatki in oprema: Delovna širina: 7,50 m Transportna širina: 3,00 m Lastna teža: 7.750 kg Pnevmatike: 520/50-17 Zračne zavore Spodnje pritrdišče 6 delovnih con, sestavljenih iz: Crackerboard Valjni segment iz sive litine 4-vrstični segment brane Izravnalna letva Jekleni Crosskill obroči | Interna št.: 11308094

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, skupna masa: 8.000 kg, skupna višina: 300 mm, skupna dolžina: 6.000 mm, skupna širina: 2.000 mm, Dolžina: 6000 mm Širina: 2000 mm Višina: 300 mm Število T-utorov: 8 Razmak med T-utori / korak: 250 mm Velikost T-utora: 28 mm Teža na ploščo cca.: 6000 kg Število ustreznih kosov: 1 Dolžina: 6000 mm Širina: 2000 mm Višina: 300 mm Teža: 8000 kg Hfjdpfx Asxf Exgeh Don Prosimo, upoštevajte: Informacije na tej strani so zbrane po naših najboljših močeh in, kolikor je mogoče, pridobljene od proizvajalca. Podatki so posredovani v dobri veri, vendar za točnost ne moremo jamčiti. Zato ne predstavljajo pogodbene pogoje ali uradne izjave. Priporočamo, da preverite vse pomembne podrobnosti.

Leto izdelave: 2017, obratovalne ure: 19.979 h, Stanje: dober (rabljeno), The temperature control unit from the brand Single is offered for sale; Hfedpfx Aeuau Dtsh Dsn Advanced 180°C temperature control unit Membrane keypad Medium: Water Unit on castors Heating capacity: 9 kW Cooling capacity: 35 kW and much more...

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve Hedpowc Rk Eefx Ah Djfn - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: dober (rabljeno), UDKP100 Večlistna krožna žaga - Moč motorja: 37 kW - Maks. višina reza: 100 mm - Maks. širina reza: 300 mm Hedpsxbrutsfx Ah Dsfn - Maks. delovna širina: 450 mm - Premer krožnih žag: 250, 300, 350 mm - Delovna hitrost: 40 m/min - Verižni transportni trak - Ročna nastavitev višine lista - Dodatno ojačen jekleni okvir, os iz posebej legiranega, kaljenega in brušenega jekla - Ročna nastavitev višine lista, odvisno od izbrane velikosti žage - Priložen velik set distančnih obročev Trenutno še na Madžarskem

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K200-00847, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, BUTT-JOINT VENEER SPLICER KUPER FL-INNOVATION 1250 '2009 MACHINE IN PERFECT CONDITION! OPTIONAL: POSSIBILITY TO PURCHASE A NEW CHAIN and other spare parts + 1,000 EUR Designed for joining smooth veneers with a thickness of 0.3 – 1.5 mm (or up to 2.5 mm with an alternative glue application system), intended for use in production processes involving high temperatures and tensile forces, such as longitudinal profile laminating or membrane press bonding. The elements are joined with urea glue. Glue is applied to the veneer edge inside the machine using an integrated glue station with a glue reservoir. The machine is equipped with a modern one-sided glue application system, consisting of a dosing roller (immersed in glue), an application roller, and a precise glue dosing system. Integrated in-machine glue application Stable steel machine frame Durable paint finish Entry alignment discs Stainless steel transport chain Robust cylindrical gear drive with articulated shafts Extended, adjustable heating zone Transport chain cleaning from contaminants and veneer-exuded water Tiltable control panel for monitoring all critical control and operation functions Hedpfx Ahsvz U A Rs Defn Technical data: - Pass-through width under frame: 1250 mm - Minimum element width: 45 mm - Minimum element length: 500 mm - Element thickness: 0.3 – 1.5 mm - Feed speed (stepless) - In-machine glue application: 20–28 m/min - Pre-glued: 20–50 m/min - Heating zone length / temperature: 1200 mm / max. 220°C - Supply voltage: 400V/50 Hz, 3Ph - Total connected power: 5.0 kW / 9.3 KVA - Air consumption: 5 NL/min at 6 bar - Dimensions: 2370 x 1960 x 1470 mm Climate-controlled glue unit – keeps constant glue temperature in the reservoir, maintaining optimal adhesive properties, preventing pre-curing or gelling, which influences joint quality while also reducing glue consumption and shortening the splicing process, especially during high ambient temperatures. The machine can be tested in Poland.

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron Hedpjk Egrpofx Ah Defn - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 6.546 h, nosilnost: 3.000 kg, dvižna višina: 4.000 mm, težišče tovora: 600 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 2.670 mm, proizvajalec motorjev: KUBOTA, vrsta prenosa: hidrostat, kapaciteta baterije: 100 Ah, širina nosilnega okvirja vilic: 1.320 mm, dolžina vilic: 1.200 mm, širina vilic: 100 mm, debelina vilic: 50 mm, stanje pnevmatik: 80 odstotek, Tip prednje pnevmatike: superelastične pnevmatike (črne), velikost sprednje pnevmatike: SE, 16×7-10,5, tip zadnje pnevmatike: superelastične pnevmatike (črne), velikost zadnje pnevmatike: SE, 22x10x16, skupna masa: 6.500 kg, lastna masa: 3.000 kg, skupna višina: 2.250 mm, skupna dolžina: 1.550 mm, skupna širina: 1.500 mm, barva: zelen, Oprema: bočni pomik, osvetlitev, pogon na vsa štiri kolesa, sprednja zaščita, zaščita za glavo, COMBILIFT C3000CB – Duplex 4000mm – Rok produkcji 2015 – Kabina – Ogrzewanie – Diesel Na sprzedaż oferujemy wózek widłowy wielokierunkowy COMBILIFT C3000CB, wyprodukowany w 2015 roku, wyposażony w maszt Duplex z wysokością podnoszenia 4000 mm oraz pełną ogrzewaną kabinę. Wózek jest w doskonałym stanie technicznym i gotowy do natychmiastowego użycia. Główne cechy: Model: COMBILIFT C3000CB Rok produkcji: 2015 Udźwig: 3000 kg Typ masztu: Duplex, wysokość podnoszenia 4000 mm Napęd: Diesel Opony: Pełne, stan bardzo dobry, Super Elastyczne Hfsdoxfmgrepfx Ah Djn Wysokość wózka: 2670 mm Stan techniczny: Bezawaryjny, serwisowany Stan: Bardzo dobry (używany) Przebieg: 6546 godz. – SERWISOWANY Dane techniczne: Rodzaj paliwa: Diesel Typ masztu: Duplex Udźwig: 3000 kg Wysokość podnoszenia: 4000 mm Podnoszenie swobodne: Brak Środek ciężkości ładunku: 600 mm Wysokość całkowita: 2670 mm Producent silnika: Kubota Moc silnika: 90 KM Masa całkowita: 6500 kg Opony przednie: SE, 16×7-10,5 Opona tylna: SE, 22x10x16 Długość wideł: 1200 mm Wysokość całkowita: 2250 mm Długość całkowita: 1550 mm Szerokość całkowita: 1500 mm Wyposażenie: Pełna kabina Ogrzewanie Oświetlenie Regulowana belka Przesuw boczny Widły paletowe Ten wózek widłowy jest idealnym rozwiązaniem dla branż wymagających efektywnej obsługi ładunków długich w wąskich przestrzeniach, jak przemysł drzewny, stalowy czy rur. Dzięki wielokierunkowej funkcjonalności, wózek zapewnia łatwe manewrowanie oraz maksymalne wykorzystanie powierzchni magazynowej. Dodatkowe cechy: Zintegrowany system sterowania wielokierunkowego Komfortowa kabina operatora Wysoka niezawodność przy intensywnej eksploatacji Doskonały do pracy zarówno na zewnątrz, jak i w magazynie Stan: Maszyna w pełni sprawna, regularnie serwisowana, gotowa do natychmiastowej pracy. Dodatkowe korzyści: Oferujemy dostawę na terenie całej Europy oraz BEZPŁATNY przegląd rozruchowy! Zapraszamy do kontaktu i umówienia się na prezentację. FT Logistics Sp. z o.o. – Europejscy specjaliści od wózków widłowych! Od lat FT Logistics Sp. z o.o. specjalizuje się w sprzedaży wysokiej jakości wózków widłowych, zdobywając zaufanie setek zadowolonych klientów. Każdy oferowany przez nas wózek jest w pełni przygotowany do pracy i posiada aktualne badania techniczne. Nasi klienci otrzymują wózki po niezbędnych naprawach, wymianach filtrów, olejów oraz innych zużytych części, co gwarantuje niezawodność i najwyższą wydajność. Przed wysyłką każdy wózek jest rygorystycznie testowany pod dużym obciążeniem w naszym magazynie logistycznym, aby zapewnić efektywność i trwałość. Zapraszamy do zapoznania się z pełną ofertą oraz do odwiedzenia naszej firmy, gdzie na własne oczy przekonają się Państwo o jakości naszych maszyn. Chętnie przeprowadzimy wspólne testy dowolnie wybranego sprzętu. Dzięki szerokiemu asortymentowi mamy pewność, że znajdziemy model dostosowany do potrzeb Państwa przedsiębiorstwa. Pozwól nam być częścią Twojego sukcesu. FT Logistics – Europejscy specjaliści od wózków widłowych! Skontaktuj się z nami już dziś, by uzyskać więcej informacji lub umówić wizytę!

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 3.571 h, JCB 535-125 Hi Viz 4x4x4 teleskopski nakladalnik, letnik 2016, z le 3.571 delovnih ur! ---- * Proizvajalec: JCB * Tip: 535-125 Hi Viz 4x4x4 * Leto izdelave: 2016 * Prebrane delovne ure: cca 3.571 * Nosilnost: 3.500 KG * Dvižna višina: 12,5 metra * CE stroj * Zaščitna rešetka * Video na zahtevo * V dobrem stanju! * Žlica na voljo za doplačilo Hfsdjxlmfnepfx Ah Dsn * Cena: 33.900 evrov, neto + 19 % DDV ---- Za dodatna vprašanja pokličite: Za več informacij pokličite: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Vse informacije brez garancije, pridržane napake in vmesna prodaja.

Stanje: novo, Our SAPI pressure blasting unit, type 'Mammut', with a 60-litre vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the integrated pressure regulator. A water separator is also permanently installed on the blasting unit; this removes moisture from the compressed air and prevents the blast media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This initiates and stops the blasting process by actuating the hand lever mounted on the blast hose. The scope of delivery includes: - SAPI pressure blasting unit 'Mammut 60 L' - 1" pressure regulator, permanently mounted - 1" water separator, permanently mounted - SAPI safety shut-off Technical data - Pressure Blasting Unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed piping 1" internal and external - Rubber-coated metal nozzle with rubber seal - Large maintenance opening - Chassis with rubber wheels - Media dosing valve (suitable for all common blasting media) - Tank capacity 60 l - Total height 1,130 mm Hsdswc Afhepfx Ah Defn - Tank diameter 360 mm - Overall diameter 700 mm - Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest on/off times, fully compliant with occupational safety guidelines (VBG 48) - The pressure setting can be precisely adjusted prior to operation: continuously adjustable from 0.1 to 12.0 bar - Reduced abrasive consumption as the pressure vessel remains under pressure, preventing unnecessary discharge of media - Upon restarting, full blast pressure is immediately available at the nozzle, eliminating build-up time—thus, significant reduction in both media consumption and wear on the blast hose - No moisture (condensate) forms inside the vessel, as it remains pressurised at all times and is not vented with each start/stop. Additional benefits include: - Optimum media dosing via hardened precision valve - Lower compressed air requirement, significantly reducing fuel (diesel) consumption - One-person operation, as vessel pressure is constantly indicated and can be adjusted via the pressure gauge without needing to start the device first - No sensitive components such as control valves, membranes or gaskets—resulting in low maintenance and reliable operation. Only the blast hose within the safety shut-off needs to be checked and replaced if necessary.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 32.000 kg, lastna masa: 5.228 kg, največja dovoljena obremenitev: 26.772 kg, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, vzmetenje: zračni dvigalo, barva: črn, velikost pnevmatike: 385/65 R22.5", Leto izdelave: 2025, številka stroja/vozila: WFDFLT2350203671, Chassis for Semi-Tipper Fine-grain steel welded structure, fifth wheel plate with replaceable 2" king pin. Patented curved front bulkhead. 24-ton 2-speed landing gear, single-sided operation, with semi-circular base and straight mounting plate, with load equalization. Uncoupling under load is not possible; when uncoupled, the vehicle must be positioned sloping to the rear. Clear rear swing radius approx. 2100 mm in rear position and approx. 2600 mm in forward position. 2 wheel chocks with holders. Aluminum side underrun protection. Rear underrun guard, pneumatically foldable, operable via switch in the truck on PIN 14 (without truck installation), and manually operable on the trailer. Half-shell mudguards, with anti-spray mudflaps only on the last axle. Tow hook at the rear (not on Revolution model). Axles & Suspension SAF disc brake axles with 430 mm disc diameter. Axles in off-road specification. Laser alignment for axles/chassis: reduces tire wear and fuel consumption. Air suspension. Air spring pressure gauge. 1st axle: automatic lift axle, also electrically controllable from the truck, including forced lowering and start-up assistance, no truck installation required. Galvanized lift axle mechanism. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HDK threaded coupling, fixed part, nominal width 48 mm (without hose connection). Operation hydraulic via truck PTO. Hydraulic connection with hose and HDK screw coupling NW = 48 mm with knurled nut. Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Slanted front wall with external hydraulic cylinder mount. Internal access at the front wall. Greenline – conical and aerodynamic body shape. Hfjdpjxclg Sefx Ah Djn Shovel and broom holders externally on the front wall. Membrane rear wall. Rear wall as hydraulically operated tailgate with wide upward opening, approx. 2,200 mm passage height. Protective cover for tailgate. Rear wall with rubber seal – Note: No guarantee for the seal! Note: Heat resistant up to max. 170°C! Side walls continuous at 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized construction. Fliegl S.T.E.P. – swiveling standing platform at the front with collapsible access ladder for side entry front left, only in conjunction with “Flip Top sliding cover.” Without insulation (not printed). "Flip Top sliding cover," automatic rear closure as folding bow. Cover folds forward. Electric drive for the cover, with 7-pin socket (charging connector) at front, without connection cable (pinout Pin 1: + / Pin 3: –), including tractor unit socket (loose, no truck installation), operation on the trailer and by radio remote control. Spiral cable 7-pin to the truck for the sliding cover. The truck must have a suitable socket (pinout Pin 1: + / Pin 3: –).

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Opis opreme in tehnični podatki Za vse tehnične parametre glejte priložen potni list. Splošno načelo selektivnega nekatalitičnega reduciranja (SNCR), ki se kot sekundarni ukrep uporablja za zmanjšanje koncentracije dušikovih oksidov (NOx) v dimnih plinih, je injiciranje raztopine amonijaka v kurišče kotla. Ta proces temelji na določenih kemijskih reakcijah, ki potekajo na izbranem mestu v kotlovnici in pri predpisanih temperaturnih pogojih. Opis SNCR postrojenja SNCR sistem je razdeljen na dva glavna dela: Skupni del – Skupen za kotle K8, K9, K10 ter eventualno K14. Hfjdpfxewwttls Ah Dsn Specifični kotlovski del – Nameščen individualno za vsak kotel (K8, K9, K10 in po potrebi K14). Komponente skupnega dela - Dozirna oprema za reagent - Polnilna postaja z lovilcem razlitij - Skladiščni rezervoarji s črpališčem - Črpalke za transport in cirkulacijo reagenta - Podzemni zbiralnik za nujne primere Kompresorska postaja - Kompresorji - Sušilniki zraka - Aeratorji in filtri - Separatorji za kondenzat in olje - Elektronske pasti za kondenzat Postaja za črpanje demineralizirane vode - Cevovodi za reagent - Tlačni in regulacijski zrak - Demineralizirano vodo - Instrumentalni zrak Komponente specifičnega kotlovskega dela Vsak kotel (K8, K9, K10 in po potrebi K14) vključuje: - Mešalni ter merilni modul - Vbrizgalna cev z dvokomponentnimi šobami - Cevovodi za reagent, demineralizirano vodo, tlačni in regulacijski zrak - Regulacijski ventili - PLC krmilni sistem - Kontinuirano merjenje temperature (AGAM ali pirometri, odvisno od kotla) - Kontinuirano NOx merjenje (N43 SIIp) Ključne značilnosti - Namen: Zmanjšanje NOx prek kemične reakcije z amonijevo raztopino. - Prilagodljivost: Sistem je zasnovan tako, da po potrebi vključuje tudi kotel K14. - Avtomatizacija: PLC krmiljenje z nadzorom v realnem času (temperatura in NOx).

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Key Features: - New centralized control console on an articulated arm. - Low voltage control panel: - Polyester membrane keyboard with thermoformed raised buttons and operating control signal. - Display showing: * Diagnostics (messages in user language) * Alarms (description of alarm reasons) * Status of inputs and outputs * Cut counter * Time elapsed per completed cut * Saw blade motor current * Saw blade tension * Saw blade speed * Numerical display of head position - Manual 24V cycle selector switch IP55. - Complete program of all special cutting cycles. - Identification of additional special cutting cycles for specific applications. - New generation, highly efficient hydraulic control unit with low energy consumption. - Rotary table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Dual band speed (40/80 m/min.) with control Hsdpofg E H Uofx Ah Djfn - Prepared for installation of electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to adapt to the workpiece material. - Clamping device can be shifted left/right, with quick-release vice. - Manual blade tension control with screen display via electronic converter. - Machine base designed to fully collect coolant, even during maximum angle cuts. - Coolant tank (with electric pump for blade lubrication and cooling) and chip drawer (can be replaced with a chip conveyor – see optional accessories) integrated in the base. - Preparation for the installation of minimal blade lubrication set (optional, in addition to the standard emulsion oil lubrication system). - Integrated chip removal brush. - Machine designed for pallet truck transport. - Adjustable length stop for repeat cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the relevant user language.

Stanje: novo, Saw blade diameter: 315 mm Cutting diameter: 90 mm Stroke: -- mm Mitre cuts: -45° to +45° Speed: 40 / 80 rpm Machine weight: approx. 165 kg Space required: approx. 1.0 x 1.15 x 1.48 m Manual Metal Circular Saw MKS 315 N Promo Set / Item no. 3620303SET - Two cutting speeds - Rotating machine head, 45° left and 45° right - Reduction gearbox, low-noise running in oil bath - Automatic membrane coolant pump with coolant filter - Vice with counter vice, quick clamping, and anti-burr jaws ensures precise and burr-free cuts - Lateral material support arm with roller - Vice swivels 45° to the left and right - Movable protective cover for optimal safety during cutting - Control handle with safety switch - Vice with counter vice, quick clamping, and anti-burr jaws - Lateral material support arm with roller - Vice can be shifted longitudinally, suitable for longitudinal cuts and slotting Cutting capacities: 0° (round) Solid material: 55 mm 0° (round) Tube: 90 mm 0° (square) Tube: 80 x 80 mm 0° (rectangular) Tube: 115 x 70 mm -45° (round) Solid material: 50 mm -45° (round) Tube: 80 mm -45° (square) Tube: 70 x 70 mm -45° (rectangular) Tube: 70 x 70 mm +45° (round) Solid material: 50 mm +45° (round) Tube: 80 mm +45° (square) Tube: 70 x 70 mm +45° (rectangular) Tube: 70 x 70 mm Hsdpfxsibw Smo Ah Dofn

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 3.571 h, nosilnost: 3.500 kg, dvižna višina: 12.500 mm, vrsta goriva: dizel, vrsta prenosa: polavtomatski, Oprema: kabina, zaščita za glavo, JCB 535-125 Hi Viz 4x4x4 teleskopski nakladalnik, letnik 2016, z le 3.571 delovnih ur! ---- * Proizvajalec: JCB * Tip: 535-125 Hi Viz 4x4x4 * Leto izdelave: 2016 * Prebrane delovne ure: cca 3.571 * Nosilnost: 3.500 KG * Dvižna višina: 12,5 metra * CE stroj * Zaščitna rešetka * Video na zahtevo * V dobrem stanju! * Žlica na voljo za doplačilo * Cena: 33.900 evrov, neto + 19 % DDV Hfjdpsxlmfhjfx Ah Djn ---- Za dodatna vprašanja pokličite: Za več informacij pokličite: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Vse informacije brez garancije, pridržane napake in vmesna prodaja.

Stanje: rabljeno, Membrane press with double working area. Cutting device for trimming the sheet to be applied. Working length: 2350 mm. Working width: 1100 mm. Maximum workable thickness: 35 mm. Installed power: 38 kW. Weight: 13,200 kg. Hedpfxew Dfkcj Ah Dsfn

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tehnični podatki: Višina konic: 110 mm Razdalja med konicama: 160 mm Premer vretena: 23 mm Moč motorja: 1,7 kW Število obratov nastavljivo s potenciometrom: ca. 100 – 2.300 obr./min 3 predizbrane hitrosti oz. 3 prestavne stopnje . Obseg dobave, stroj z: Načini delovanja: ročni + avtomatski Hsdpfxow N Sa Ho Ah Dofn Pnevmatska vpenjalna naprava Nagibni zadnji konjiček z 2 tulecama za vpenjalne čeljusti K12, s preklopnim stikalom Ročna prečna podpora s 4 mejami, sestavljena iz prečne in vzdolžne podpore .

Stanje: pripravljen za uporabo (rabljen), Na voljo je kompakten in mobilen BWT sistem za reverzno osmozo z integriranim rezervoarjem. Pretok: približno 160 l/h, izkoristek (WCF): 40%-75%, stopnja zadrževanja soli: več kot 98%, prevodnost permeata: manj kot 20µS/cm, prostornina rezervoarja: 50 l, membrane: 1. Dimenzije stroja (D/Š/V): približno 350mm/560mm/750mm, teža: približno 55kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Hfsdpfx Ajxc Nhyeh Djn

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Vice: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic-dynamic and manual operation, equipped with MEP-28 control enabling mitre cuts from 45° to the right up to 60° to the left. Hfjdefg E H Sjpfx Ah Djn Semi-automatic function: At the start of the cycle: – Vice closes, motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position, then starting the cycle via hand button). Some features: - New centralised control panel on an articulated arm for easy operation from any working position. - Low-voltage operating panel: - Polyester membrane keypad with thermoformed, raised buttons and actuation control signal. - Display shows: * Diagnostics (messages in the user’s language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time used for completed cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position - IP55 manual 24 V cycle switch lever - Complete program for all special cutting cycles - Possibility to define other special cutting cycles for specific applications - New, latest-generation hydraulic control unit, highly efficient and energy-saving - Large work surface with turntable on roller bearings (265 mm), fitted with preloaded thrust bearing - Dual band speed (36/72 m/min.) with control panel - Prepared for installation of an electronic inverter for stepless band speed regulation from 20 to 90 m/min. - Adjustable saw head stroke controlled directly from the panel to adapt to the workpiece height - Clamping device can be shifted laterally left and right, featuring quick-action vice - Manual blade tension control, display on screen via electronic converter - Machine base with pull-out coolant tray - Electric coolant pump for saw blade cooling and lubrication - Prepared for installation of optional minimum-quantity lubrication system, in addition to the standard emulsion oil lubrication - Swarf removal brush - Machine suitable for pallet truck transport - Length stop for repetitive cuts - Material support arm with roller, to attach loading table - Bimetal saw blade for solid and profile material - Tools and user manual in the language of the operator

Leto izdelave: 2024, Stanje: novo, številka stroja/vozila: H3000-H5000TM,

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 7.450 h, Volvo L30G kolesni nakladač letnik 2014 s nagibno žlico in vilicami! ----* Proizvajalec: Volvo * Tip: L30G * Letnik: 2014 * Prebrane delovne ure: cca 7.450 * Vključuje nagibno žlico in vilice * Nemški stroj * Prva lastnica Hsdpfx Aoxit Iwsh Djfn * Dodatne fotografije in video na zahtevo * Cena: 23.900 evrov, neto + 19 % DDV ----Za dodatna vprašanja prosimo pokličite: Za več informacij prosimo pokličite: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Vse informacije brez garancije, napake in vmesna prodaja pridržane.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FN643924, Leto izdelave: 2021, obratovalne ure: 4.008 h, nosilnost: 1.500 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 1.400 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.080 mm, kapaciteta baterije: 1.000 Ah, napetost baterije: 24 V, dolžina vilic: 1.000 mm, lastna masa: 3.161 kg, Oprema: bočni pomik, Jungheinrich EFG 115 3-kolesni električni viličar, letnik 2021, s triplex stebrom in popolnim prostim dvigom Podatki: Jungheinrich EFG 115 Letnik: 2021 Prebrane delovne ure (h): 4008 Tip dvižnega stebra: Triplex Dvižna višina (mm): 4500 Prosti dvig (mm): 1400 Gradbena višina (mm): 2080 Priključki: Stranski pomik Nosilnost (kg): 1500 Dolžina vilic (mm): 1000 Lastna teža (kg): 3161 Dodatna hidravlika na strani naprave: ZH1 Dodatna hidravlika na strani stebra: ZH1 Prednje pnevmatike: Superelastične, ne puščajo sledi, NOVE Zadnje pnevmatike: Superelastične, ne puščajo sledi Letnik baterije: 2021 Kapaciteta baterije (Ah): 1000 Hsdpfxow Nqdwo Ah Dsfn Napetost baterije (V): 24 Oprema: Zaščitna mreža za tovor, opozorilna luč, zadnja modra varnostna luč Opomba: Popolni prosti dvig. Sprednje pnevmatike so nove.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 91642615, Leto izdelave: 2019, obratovalne ure: 3 h, nosilnost: 500 kg, dvižna višina: 200 mm, vrsta goriva: električni, kapaciteta baterije: 130 Ah, napetost baterije: 24 V, dolžina vilic: 1.200 mm, lastna masa: 410 kg, Jungheinrich EJE 114 Nizkodvižni paletni voziček, letnik 2019 Podatki: Jungheinrich EJE 114 Letnik: 2019 Prebrane delovne ure: 3 Dvižna višina (mm): 200 Nosilnost (kg): 500 Hodpfx Ahsxfizlj Dofn Dolžina vilic (mm): 1200 Lastna teža (kg): 410 Sprednje gume: Poliuretan Zadnje gume: Poliuretan Letnik baterije: 2019 Kapaciteta baterije (Ah): 130 Napetost baterije (V): 24 Oprema: Integriran polnilec. Opomba: Zunanji razmak med vilicami: 880 mm.