Biesse Skill 1536 G Ft nakup rabljenega (320)

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Gkjdpfx Abegk T Tts Tjf Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps Godpfod Tyvxex Ab Tokf - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: zelo dobro (rabljeno), Electronic control RT 483 No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports Godpfx Aofz Naneb Tokf No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), Electronic programmer NC 400 Feed-through motorized conveyor belts (No.) 2 Horizontal drilling supports (No.) 2 Drilling units per horizontal drilling support (No.) 2 Spindles per horizontal drilling unit (No.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (No.) 6 Drilling units per lower vertical drilling support (No.) 2 Upper vertical workpiece clamps (No.) 4 Continuous screws for chip removal (No.) 2 Digital position display (axis) Total connected load (kW) 27.7 The CNC controller manages the movement (X-axis) of the horizontal drilling supports. The CNC controller manages the movement (Y-axis) of the stops. Gkedpfx Abolwqrts Tsf The CNC manages the movement (Z-axis) of all vertical drilling supports.

Stanje: zelo dobro (rabljeno), PC control type NC 400 Deluxe No. 2 motorized throughfeed conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support Gkjdpfx Abjrm Ik Ts Tsf No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Total connected load (kW) The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops. The CNC manages the movement (X-axis) of the transport belts.

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in line) Edging material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Cam pitch (mm): 500 FORMATTING UNIT (per side): - Pre-milling cutter (trimming) AS 10 (5.8 kW) - 2 x Hogger DT 10 (5.8 + 5.8 kW) - Spray unit (for liquid anti-adhesive) EDGE BANDING UNIT (per side): - Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edging pressure area (CNC-controlled). Edge magazine for rolls (capacity 6 rolls) Gksdpfx Abou Tg Uqj Tof - End trimming unit IT 90-S (0.3 kW x 2) 28 m/min. 0 - 25°. PNEUMATIC - Multi-profile milling unit (CNC-controlled) RF 30 (0.65 kW x 2) 0 - 25° Multi-function unit (radius milling and shaping) AR 80 (0.3 kW x 2) 25 m/min - ROTAX Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraper unit (CNC-controlled) RB 30 Flat scraper unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for panels (usable height 80 mm), as a buffer to speed up the work cycle

Stanje: zelo dobro (rabljeno), Longitudinal saw (splitter) for grooving and/or cutting a single panel into two parts - Minimum panel length: 500 mm - Maximum panel length: 2,700 mm - Minimum panel width: approx. 300 mm - Maximum panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Maximum feed speed: 50 m/min (4 kW) - Installed total power: 43.2 kW The machine consists of the following units: POS. 1: Milling unit for underside grooving (7.4 kW), max. diameter 300 mm POS. 2: Lower pre-scoring saw (7.4 kW), max. diameter 350 mm POS. 3: Upper pre-scoring saw (7.4 kW), max. diameter 350 mm POS. 4: Lower main saw (splitting blade) (7.4 kW), max. diameter 350 mm Gsdpfju Tqb Ujx Ab Tekf

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min. Gjdpfxow Uhbks Ab Tokf No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and with 22 drilling spindles); No. 5 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 5 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction PC control, type CNI O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 throughfeed motorized conveyors, feed speed up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel insertion devices) No. 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); No. 2 upper vertical workpiece clamps No. 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), Complete factory for the production of furniture, consisting of: Gksdpeh T Dvtjfx Ab Tsf KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel insertion machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side sizing and edge banding line "HOMAG", consisting of: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° rotation transfer (longitudinal/transversal) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° rotation transfer (transversal/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' model Vektor CNC LINE drilling-milling-inserting, consisting of: Hedgehog loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfers KZ2090) Sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge banding magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with stacking infeed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with throughfeed carcass press KZ2203) Sawing line "SALVADOR" (panel crosscut + splitter) with stacking "ESSE2" KZ2009) Veneer department (double knife veneer bundle guillotine "MONGUZZI", cross-cut shears "MONGUZZI"; splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate KZ2215) Automatic panel storage system "ESSE2" model MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, delivery vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, adhesive applicators, etc.), extraction system, roller conveyors, racking (wall-mounted), forklifts, pallet trucks, and more. Machines are still installed at the user's site and can be inspected by arrangement.

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edgebanding material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection enclosure Gsdohvahhspfx Ab Tokf Side adjustment of aggregate carriers: manual Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Protection milling cutter (pre-milling) AS 10 (5.8 kW) 2 x Hogging units DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid non-stick agent) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28m/min, 0 - 25°. Pneumatic Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multi-function unit (radius and contour copying/trimming) AR 80 (0.65 kW x 2) 25m/min ROTAX motors with automatic tool changer 2 Universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraping unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) TURNING TRANSFER (longitudinal/crosswise), with double cone "RBO" Model GPK-1 C) Double-sided edge banding and sizing machine "BIESSE" Model Stream SB2 11.0 Gksdohvah Nepfx Ab Tof D) PANEL FLIPPER (180°, with top side down) "RBO" Model Ribaltatore E) TURNING TRANSFER (crosswise/longitudinal), with double cone "RBO" Model GPK-2 F) STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Stanje: zelo dobro (rabljeno), PC control system type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min): 35 - 75 No. 2 horizontal drilling units Dowel insertion systems (with glue injection units) No. 5+5 Max. working width (mm): 3200 Min. working width (mm): 235 No. 6 lower vertical drilling units Drilling units per lower vertical drilling unit (No.): 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 continuous screws for chip removal Total connected load (kW): CNC controls movement (X-axis) of horizontal drilling units CNC controls movement (Y-axis) of the stops Godpjd Nuwiefx Ab Tjkf

Stanje: zelo dobro (rabljeno), Dvosmerni stroj, ki se lahko postavi v linijo za pretočnim večvrtalnim strojem za avtomatski proces vrtanja in vstavljanja moznikov. - Elektronski programator "CNI" NC 400 - Vgrajena komandna in elektro omarica - Največja razdalja med vodoravnimi glavami pribl. 3200 mm - Premična in nastavljiva desna stran stroja (glede na širino plošč) - 2 motorizirana transportna trakova (0,25 KM x 2 motorja) - 1+1 rezervoarja za moznike za samodejno podajanje do šob - 6+6 vodoravnih vstavljalnih šob (injektorji za lepilo in pogoni za moznike) - Visokotlačni sistem za dovajanje lepila - Skupna instalirana moč cca 5 kW. Gkodpfx Aow Ug A Heb Tef

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable panel (workpiece), movable working head – Vertical panel (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers for securing the workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: approx. 260 x 40 x 10 Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Separate electrical and control cabinet Total connected load (kW): 35 WORKING UNITS: Drilling aggregate with vertical spindles: 1 unit Independent vertical drilling spindles: 24 (7 in X + 17 in Y) Gsdpfx Absihfiio Tokf Drilling aggregate with horizontal spindles: 2 units Independent horizontal drilling spindles: 36 (9+9 = 18 x 2) Drilling head motor power (kW): 3 x 3 (approx.) Vertical main spindle (milling unit): 1 unit Power vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Revolver type, magazine positions: 10 tool slots

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW WORKPIECES, min. width 100 mm Gksdpfsu Tp Slex Ab Tjf W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 6 upper vertical workpiece clamps + No. 2 continuous-feed screws for chip extraction CNC control - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 3 upper drilling supports (each with 2.3 HP drilling heads, with various head configurations); - No. 6 upper vertical workpiece clamps - No. 2 continuous-feed screws for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC Gjdpfx Abst Ig A Ss Tokf - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control NC 500 (Software Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Gedpfxoukhd Ae Ab Tjkf Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) Gjdpfx Aeidqf Rob Tskf No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction Gjdpfxevnq Txj Ab Tskf NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles for each horizontal drilling unit (Qty.): 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports Gjdpfx Aboidqd To Tekf No. 4 upper vertical workpiece clamps Chip removal belt Digital readout of positioning data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), PC control unit type NC 400 (with software for managing work cycles) No. 2 continuous motorized conveyor belts Max. working width (mm): 3200 – Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty): 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit on upper drilling support No. 2 upper vertical workpiece clamps No. 2 screws (continuous) for chip removal Digital display for position data (axes) Total connected load (kW): 25 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops. Gkedpfx Abei D D Tfo Tef OPTION: front loader (for narrow parts: min. 60 mm – max. 260 mm)

Stanje: zelo dobro (rabljeno), Electronic machine, CNC-controlled, Gedpfshvi Dujx Ab Tokf PC control type NC 500 – Tooling System software No. 2 pass-through motorized conveyor belts – feed speed (m/min) approx. 35 - 75 No. 2 horizontal drilling units Drilling spindles per horizontal drilling unit (Qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling units Drilling spindles per lower vertical drilling unit (Qty) 2 x 1.8 HP No. 3 upper vertical drilling units Spindles per upper drilling unit (Qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 endless screws for chip removal CNC controls the movement (X-axis) of the horizontal drilling units CNC controls the movement (Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axis Y1 and Y2) of the drilling spindles CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC control manages all programming of automatic work cycles

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Gkedpsu Rc Hyefx Ab Tjf Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): Gedpeu Rc Anefx Ab Tjkf 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Flexible N.C.-Automatiklinie zum Bohren, Fräsen und Einsetzen (Beschläge). Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Stachelmagazin (Puffer) für 18 Positionen KZ2047) Übergabestation mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabestation mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabestation mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 Gsdpfx Ajidmkrob Tokf KZ2053) Übergabestation mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn ebenfalls mit motorisierten Bändern (zum Wenden der Platten um 180° zur Weitergabe an die Montagelinien)