Bf 30 Super nakup rabljenega (26.681)

Stanje: rabljeno, Type BF 63 Spindle Mount: 4MT Spindle Diameter: 63 mm Ijdpfxewrpy Ro Abxeau Spindle Speed: 8–1400 rpm Table Size: 900 x 710 mm Drilling Travel: 560 mm Table Load Capacity: 2000 kg Rotary Table: 360 degrees

Stanje: rabljeno, lastna masa: 6.740 kg, največja dovoljena obremenitev: 23.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 01/2027, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R17,5 ---/140J, velikost zadnje pnevmatike: 235/75 R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Zatezne ušeske, žepi za drogove, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, slikovni vzorci -- Več podatkov na: !, Več podrobnosti: ! Iaedpfx Aozd Dqfebxou

Stanje: novo, Leto izdelave: 2026, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, BERG+SCHMID Double Mitre Bandsaw GBS 250 Super AutoCut Cutting speed: 18–110 rpm Iaedpfx Aor Ik Sqsbxou • Mitre cuts: 60° left / 45° right • Quick-release vice, adjustable • Heavy-duty vice and cast iron machine base • Ball-bearing turntable • Hydraulic brake cylinder • Large, heavy-duty material support • Automatic coolant system • Worm gear drive running in an oil bath • Fully enclosed saw frame • Adjustable ball bearings • Tool compartment – base with door • Cut monitoring via ammeter • Variable cutting pressure feed regulator • Support roller (infeed side) • Machine base (supplied dismantled) GBS 250 Super AutoCut 3-Step System: I. Automatic lowering of the saw frame via hydraulic cylinder, stepless feed adjustment, with end switch at end of cut II. Rapid lowering mode for the saw frame up to the workpiece, then automatic switch to normal cutting feed (e.g., for marking) III. Hydraulic cylinder functions as brake cylinder: a) Manual mode (e.g., for notching) or b) Lowering while stationary Saw blade dimensions: 2765x27x0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication systems, etc., available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 560.000 km, prva registracija: 11/2017, vrsta goriva: dizel, lastna masa: 2.400 kg, največja dovoljena obremenitev: 1.100 kg, skupna masa: 3.500 kg, velikost pnevmatike: 225/65 R 16, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, skupna dolžina: 7.128 mm, Leto izdelave: 2017, Oprema: airbag, drsna vrata, klimatska naprava, računalnik na krovu, IVECO DAILY 35S14, z zelo dolgo medosno razdaljo in zelo visoko streho, motor zamenjan z 60.000 km, mehanika in karoserija v dobrem stanju. Iajdpfxszcmkyo Abxeu

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Širokopasovni brusilni stroj SCM Sandya 30 RT Delovna širina: 1100 mm Delovna višina: 3-160 mm Število agregatov: 2 Kalibracijski jekleni valj Agregat z deljeno čeljustjo, razdeljeno na 20 sekcij Moč motorjev: 1. 15 kW 2. 11 kW Optična oscilacija Sistem za odpih brusnega papirja na drugem agregatu Rezervna segmentna čeljust Dolžina brusnega traku: 2620x1115 mm Hitrost podajanja nastavljiva z variatorjem Dimenzije stroja: 180x300x230 cm (V) Teža stroja: 2700 kg Iaodpfx Aozdgltebxou

Stanje: rabljeno, Leto izdelave: 2021, Primerno za (model): Unimog, tovornjak, ©farmpartner-tec GmbH: UNIMOG_____Prodajamo 1 rabljen solilnik Schmidt Stratos S 30 - 24 VEP 490, letnik 2021. STRATOS S30 Schmidt silos-solilnik STRATOS S 30 (24), 3,0 m³ rezervoar iz nerjavečega jekla Polžasti transporter ("S") Zaščitna mreža 40x40 mm, jeklo (za S/F/D25-30) Profi preklopna streha, nerjaveče jeklo (za 25-30) Rezervoar v oranžni barvi RAL2011 (serijsko) Pokrov polža (za S17 - S30) Lestev iz nerjavečega jekla (serijsko pri solilnikih iz nerjavečega jekla) Zadnji pokrov iz nerjavečega jekla Priprava FS (dodatni ventil na hidravličnem bloku Pogon preko vozilne hidravlike ("V") Priključki spredaj na stroju (za V) Hidravlične sklopke brez puščanja ISO16028, P=gr.2(M) R=gr.3 (Krmilni sistem Evolution Professional "EP" z električnim nastavljanjem vzorca posipanja) Premium posipalni krožnik "490" (širina posipanja 2 - 10 m) Kroglični okvir za Unimog 405.125 Podporna noga (4 kosi), 3 t, centralni ročni pogon, vklj. s stranskimi oporami Rotacijska opozorilna luč (1 kos) Opozorilni trak rdeče-bele barve na vrhu rezervoarja Označba "Zimska služba" (v nemščini) Obrisna označba po UN ECE R48 Pralna zaščita 2.000 mm Minimess priključek na ventilskem bloku, brez manometra Merjenje količine pri Load Sensing črpalki (za V) Lokacija: 93095 Hagelstadt Iaodpfx Aoyq Ar Aebxsu

Stanje: rabljeno, Leto izdelave: 1991, Premer kolesa - maks. --- mm Širina kolesa --- mm Modul - maks. --- Iedpoya Eqasfx Abxeau Modul - min. --- Krmilnik --- Skupna zahtevana moč --- kW Teža stroja ca. --- t Potreben prostor ca. --- m

Stanje: zelo dobro (rabljeno), Drilling capacity in steel (diameter): 35 / 45 mm Throat depth: 330 mm Drilling stroke: 200 mm Morse taper: MT 4 Table diameter: 600 mm Spindle speeds – stepless: 80 - 1800 rpm Table adjustment upwards: 450 mm Iodjzd Hgpjpfx Abxjau Spindle travel: 400 mm Total power requirement: 2.5 kW Machine weight approx. 1.4 t Space requirements approx. 2.5 x 1.2 x 0.8 m Automatic feed, coolant system

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WKVDAS00300129422, lastna masa: 9.882 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 845 mm, skupna dolžina: 13.190 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, NOVO, ŠE NI REGISTRIRAN Prikolica s hidravličnimi rampami BPW osi, nosilnost 10 t 1. os dvižna, 3. os krmiljena Skupna dolžina: 13.190 mm Dolžina nakladalne površine: 9.240 mm Višina nakladalne površine od tal: 845 mm Hidravlične rampe 40 t s pomikom Stranske razširitve Sidrni kavlji Rezervno kolo Lastna teža: 9.880 kg Iasdezcqgfjpfx Abxeu

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2X387D02486, Leto izdelave: 2013, obratovalne ure: 1.523 h, nosilnost: 3.000 kg, dvižna višina: 5.400 mm, dolžina vilic: 1.500 mm, skupna masa: 4.500 kg, skupna višina: 2.400 mm, skupna dolžina: 4.500 mm, skupna širina: 1.200 mm, LINDE E 30-01 električni viličar Pozor: Izdelek je treba obvezno prevzeti med 04.08. in 13.08.2026 na še dogovorjen datum. Iedpfjzdzgkox Abxsau FCA D-79268 Bötzingen – naloženo na tovornjak

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Iaedpfxjzddktj Abxeu

Stanje: pripravljen za uporabo (rabljen), Konvekcijska peč Eloma Backermaster EB 30 XL T. Na voljo je 5 kosov peči Eloma. Cena velja za en kos. Pripravljeno za uporabo. Nahaja se v Vácegresu, Madžarska (EU). Iasdpfxsyldaks Abxeu

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2026, trajanje garancije: 3 meseci, vhodna napetost: 400 V, Certificirano po DGUV do: 08/2027, skupna dolžina: 700 mm, skupna masa: 285 kg, skupna širina: 650 mm, skupna višina: 1.420 mm, električna varovalka: 10 A, vhodna frekvenca: 50 Hz, lastna masa: 285 kg, Stepalni stroj Boku - Diosna Model: RS 30 S 2 delovni funkciji: 1 x mešanje / 1 x stepanje Iaodpfx Abewyrzmsxeu 1 mešalna metla, 1 stepalna metla 1 25-litrski inox kotel Delovna gred/mešalna gred kot nova Hiter dvig kotla Mešalni stroj z osvetlitvijo kotla enostavna tehnika Priklop 400V, vtič 16A-CEE Rabljeni stroj, obnovljen in preverjen po SAB z garancijo + servis rezervnih delov Možnost: Nov inox kotel Obročasti plinski gorilnik Servisni paket Dostava Vzdrževalna pogodba Uvajanje in zagon Veliko drugih stepalnih strojev na zalogi!

Stanje: novo, Bore diameter variable mm Number of horizontal drilling heads: 3 pcs. Number of vertical drilling heads: 4 pcs. Weight: 1,500 kg Dimensions (L x W x H): 4,800 x 1,600 x 2,400 mm Width with table extension: 2,300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill, depending on the setup and configuration, you can: - Drill for handle olives in the loose frame part or for finished sashes, with multi-spindle drilling head, quick-changeable, also for routing of lock case recesses for RC 2/security transmission - Drill for corner bearings in the loose frame part, with multi-spindle drilling head, quick-changeable, orientation by stop or measuring (tilt windows) - Vertical drilling from above for hardware, pre-drilling for clip in the loose frame part - Milling vertically from above for handles, profile cylinders, 3D hinge hardware - Horizontal drilling with 2 drilling units, different drill diameters, dowel drilling for end grain and longitudinal sides, setting blocks / transoms, mullions, corner joints, front doors etc. - Horizontal milling for lock case / hardware etc. Machine Description - Base frame in robust welded construction, linear guide for X-axis - Table support 3,000 x 200 mm - 6 pneumatic clamping cylinders with automatic retraction - 2 side stops for end grain machining, manually retractable - 2 longitudinal stops manually extendable/retractable Travel Ranges: - X-axis – 3,000 mm effective length - Y-axis – 180 mm - Z-axis – 105 mm Units: - 1 vertical drilling unit (Unit 1) from above, 1.1 kW drilling motor, speed 1,500 - 12,000 rpm, 1 spindle, collet chuck ER 25 - 1 vertical drilling unit (Unit 2) from above, 1.1 kW drilling motor, speed 3,000 rpm, with quick-change drilling head system - 1 drilling head BKF 3, for olives, quick-changeable - 1 drilling head BKF 3/2 for corner bearings, quick-changeable - 1 vertical milling unit (Unit 3) from above, 2.0 kW milling motor, 1,500 - 16,000 rpm, collet chuck ER 25 - 2 horizontal drilling units (Units 4 and 5) 1.0 kW, 1,500 – 12,000 rpm, collet chuck ER 20 - 1 horizontal milling unit (Unit 3) 2.0 kW, 1,500 – 16,000 rpm, collet chuck ER 20 Control: electro-pneumatic with 3-axis control X, Y, Z NC Position Controller by B + R, input via 10" TFT display Machine complete with 1 set of drill tools Ø 6, 8, 10, and 12 mm; 2 rough/finish cutters HM Ø 16 mm, CE compliant, ready to connect Extraction connection: 1 x Ø 120, 1 x Ø 80 mm Iasdod Ih Hqspfx Abxsu Power supply: 1 x 400 V, 16 Amps Air supply: 1 x Ø 9 mm OPTION: Longitudinal stops right/left with NC axis high/low, programmable, dimension input by rebate or light measurement possible Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – machine weight 1,500 kg ----- Total price in the above configuration, ex-works: upon request Plus delivery and installation/training (Technical information according to manufacturer – without guarantee!)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Kolesni asfaltni finišer Vogele Super 1803-2 Letnik: 2009 8.000 delovnih ur Raztegljiva razdelilna greda 2,5 m zaprto - 5 m raztegnjeno Tip motorja: Perkins 1106D-E66TA Iodpjzcyvpofx Abxjau Delovna hitrost: 18 m/min Električni ogrevalni sistem Splošno dobro stanje SPREJEMAMO MENJAVE VOZIL VSEH ZNAMK, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, Z OPREMO CIFA, SERMAC, PUTZMEISTER; ALI GRADBENE STROJE CATERPILLAR, FIAT HITACHI, KOMATSU.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, NOVO NOVO Stiskalnica za žemlje NOVO NOVO Polavtomatski stroj za deljenje in oblikovanje testa, Daub model: 4-30 NOVO Vrhunska dovršena tehnologija ... original! Uporabniku prijazen, enostaven način čiščenja! s 3 delovnimi ploščami Iedsu Rzk Dopfx Abxjau Obroč za testo s teflonskim premazom in funkcijo "easy klik" Delilno območje 40 do 130 gramov/kos Delitev na 30 delov z noži iz nerjavečega jekla Stroj je premičen Zmogljivost največ 6000 kosov/uro Samo pri nas preizkušeno po DGUV V3 Priključek 400V, vtič 16A-CEE Mere: 620 x 670 x 1470 mm (ŠxGxV) NOV STROJ & SAB preizkušen z garancijo in servisom rezervnih delov Možnosti: Leasing & najem delovne plošče vzdrževalna pogodba servisni paket dostava uvajanje in zagon Najboljša izbira delilcev testa je le pri nas!

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, vhodna napetost: 400 V, leto zadnje generalne obnove: 2026, Certificirano po DGUV do: 08/2027, delovna širina: 300 mm, širina transportnega traku: 320 mm, vrsta vhodnega toka: trifazni, skupna širina: 590 mm, skupna dolžina: 680 mm, skupna višina: 1.300 mm, Stroj za zvijanje rogljičev Erka WMA 30 Širina ovijalnega traku: 320 mm Iaedpfjy Ac U Ajx Abxeu za vse vrste štručk, kot so Kornspitz in slane štručke, mobilni stroj za zvijanje rogljičev Priključek 400V, vtič 16A-CEE Dimenzije: 590 x 680 x 1220-1300 mm (Š x D x V) Rabljeni, obnovljeni stroj z garancijo in servisom rezervnih delov Kvaliteta strokovnega podjetja! Izkoristite več kot 35 let izkušenj!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 3.800 h, Atlas Copco kompresor (demonstracijski stroj), stanje kot novo. Smo uradni pooblaščeni zastopnik Atlas Copco. Kompresor bo dobavljen po servisu in pripravljen za uporabo. Nacionalna katalogna cena novega: 51.569 €. Glavne značilnosti: Iodpfx Abszdf Imoxjau - Max tlak: 10 bar - Moč: 30 kW / 40 KM - Zmogljivost: 6.540 l/min

Stanje: dober (rabljeno),

Stanje: rabljeno, Leto izdelave: 2001, Condition: used Year of manufacture: 2001 Stock number: 9647 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €24,400 Available in stock: 1 Punching force: 30 tons Working area: 1250+N x 1000 mm X-axis travel (with repositioning): 1250 mm Y-axis travel: 1000 mm X-axis speed: 40 m/min Y-axis speed: 30 m/min Combined X+Y speed: 50 m/min Iedpfewirkgjx Abxjau Stroke: 30 mm Max. stroke rate (in 1 mm steps, 1 mm sheet thickness): 730 strokes/min Max. stroke rate (in 25 mm steps, 1 mm sheet thickness): 300 strokes/min Table height: 980 mm Motor power: 4 kW Oil tank: 115 l Length: 4000 mm Width: 2780 mm Height: 1900 mm Transport dimensions: 4000 x 2300 x 1900 mm + Z mm Weight: 4800 kg Equipped with MTE6 6-station multi-tool holder (max. diameter 24 mm) 2 clamping claws Table with brushes, table size 1970 x 2260 mm Foot pedal 2 additional single die holders PC with Euromac Eurowin 8.36 software Max. punching force: 300 kN Automatic repositioning up to 10,000 mm Max. punching diameter with single tool: 88.9 mm Max. punching diameter with MTE6 multi-tool holder: diameter 24 mm Max. clamp jaw opening: 7 mm Transport width: 2350 mm Operating manuals in English and Italian CE declaration available INCLUDES LARGE TOOLING PACKAGE Multiple pieces each of the following dimensions: Round: diameter 2.5/2.8/3/3.12/3.2/3.5/3.9/4.1/4/4.5/5/5.2/5.5/6/7/7.5/8/8.5/9/9 .5/10/10.5/11/11.5/12/12.5/13/13.5/14/15/16/18/19/20/21/23 mm Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong slot: 10x6.5/12x8.5/12.2x10.7/18x5 mm BUYING USED MACHINES IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detailed photos & functional videos of the current condition • ON-SITE LIVE CHECK Live demonstration at our facility • DIGITAL DEMONSTRATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day return policy Details:

Leto izdelave: 2006, stanje: rabljeno, največja debelina roba: 12 mm, hitrost pomika os X: 40 m/min, višina plošče: 60 mm, dolžina plošče: 2.400 mm, širina plošče: 1.000 mm, številka stroja/vozila: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! Collection of the machine must take place between 10.06.26 and 30.06.26! The machinery package consists of four machines as follows: Item 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cups Item 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Bonding system: PUR, Laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Max. panel length: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling unit Corner rounding unit Isdpfx Absy Ur Hljxeau Grooving unit Pressure system Panel support guides NC positioning Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically sequenced engagement NC unit positioning Unit 2: Double milling top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm NC positioning Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically sequenced engagement NC positioning Gluing and edging system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel edge Edge processing units Number of edge processing units: 8 Edge processing unit 1: End trimming unit Number of motors: 2 NC positioning Edge processing unit 2: Rough trimming top and bottom Number of motors: 2 Edge processing unit 3: Fine trimming for flush and radius milling Number of motors: 2 NC positioning Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change NC positioning Edge processing unit 5: Milling/planing unit Number of motors: 1 Unit 5 motor power: 12 kW Unit 5 speed: 10,000 rpm Automatic tool change NC positioning Edge processing unit 6: Edge scraping blade NC positioning Edge processing unit 7: Glue scraping blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Item 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Movement system with frame Suction cup system Item 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return conveyor for edge banding machine Max. panel width: 1,000 mm Max. panel length: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8522

Stanje: rabljeno, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Iodpfx Aozddz Ejbxsau Rotor knives: 3 Stator knives: 2 Drive: 7.5 kW Double-shear cut With roller feed, electrical control cabinet, and soundproof enclosure

Stanje: rabljeno, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Iaedpfjzddyhox Abxou Stator knives: 6 Rotor knives: 9

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, vrsta goriva: električni, Viličar Still RX60 - 30 Letnik: 2010 Gradbena višina: 2,85 m Dolžina vilic: 1,2 m Višina dviga: 4620 mm Iodpfx Aoy Rfcfjbxoau Stranski pomik Prilagoditev vilic z polnilcem Baterija: Obnovljena v 19. tednu leta 2026 s preskusnim protokolom Test kapacitete (C5 test praznjenja) Preostala kapaciteta: 96 %

Stanje: rabljeno, Leto izdelave: 2008, HORIZON HT-30, three-side trimmer, used The Horizon HT-30 is an extremely robust three-side trimmer that has secured its place among the most popular machines in print finishing thanks to its exceptional reliability—a guarantee for quality which, due to its high demand, is often sold very quickly. Key Features: - Operation: Stand-alone (offline) - User-friendly: Simple adjustment via touchscreen interface - The Horizon HT-30 automatically trims books, so the operator does not need to be present at all times. After loading the books, the HT-30 signals when cutting is complete for unloading and reloading - Memory function: 40 storage slots for repeat jobs - Operation: Stacks and trims up to 10 copies at once, fully automatic - Cutting process: The blade works in both directions—clean cutting without damage - Conveyor belt: Transports the trimmed books to a stacking area - Durable design: The HT-30 is built for longevity and robust operation Specifications: - Untrimmed book size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed book size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trimming range: Max: 99 mm; Min: 2 mm - Pre-stack depth: 300 mm - Speed: Up to 520 books per hour - Clamping pressure: Max. 8 kN - Noise level: Max. 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Package We take care of everything: from secure packaging and transport to customs clearance. Upon request, we also provide tailored leasing offers. Sustainable and cost-efficient Choose a pre-owned machine and benefit twice: Protect the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price. Isdpfxszcv D Aj Abxsau