Promag 30 F nakup rabljenega (53.766)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, vrsta zaščite (IP koda): IP67, 4 kos rabljeni magnetno-induktivni merilniki pretoka ENDRESS + HAUSER Model: Promag 30F in 31F Napetost: 85-260 VAC Kdedpfx Afexrn Svo Tjg Moč: 15 VA/W 50-60 Hz - IP67 DN50 in DN80

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.360 mm, pomik po osi Z: 1.000 mm, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 20 m/min, največja hitrost vretena: 15.000 obr/min, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 20 m/min, vrsta vhodnega toka: trifazni, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 9.000 obr/min, skupna masa: 15.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, First commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (Zero-point clamping plates shown as well as further clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axis drives Feed rate X, Y, Z axis: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Pre-fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Kodpfx Afox Iuguo Tjdg Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is supplied without enclosure and must be CE-compliant enclosed by the buyer. Special features: The tool changer, vacuum table including pump, and extraction device can be purchased at an additional cost. However, these are NOT included as standard equipment with the machine!

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.360 mm, pomik po osi Z: 1.000 mm, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 20 m/min, največja hitrost vretena: 15.000 obr/min, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 20 m/min, vrsta vhodnega toka: trifazni, vrtilni moment: 57 Nm, skupna masa: 15.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with handheld unit Working Range X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping Table Length x Width x Height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (Depicted zero-point clamping plates as well as other clamping devices are not included!) Milling Head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Drives for Linear Axes Traverse speed X, Y, Z axes: approx. 20 m/min Connection Data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Pre-fusing: approx. 63 A Dimensions, Weight Footprint of the machine without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional Equipment - 12-position tool changer - Minimum quantity external lubrication system - TT140 measuring probe Kodpfx Afjx Ifdko Tjdg Machine Condition Fully functional, machine is supplied without enclosure and must be made CE-compliant and enclosed by the buyer.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, leto zadnje generalne obnove: 2025, vhodna napetost: 400 V, Certificirano po DGUV do: 12/2026, skupna masa: 258 kg, skupna širina: 880 mm, skupna dolžina: 700 mm, vhodna frekvenca: 50 Hz, vhodni tok: 16 A, električna varovalka: 16 A, Dvigalni gnetilec Kemper F 30 SL Posoda in gnetilna roka iz nerjavečega jekla Pokrivalo proti moki NOVO 2 hitrosti, 1 časovno stikalo Robustna tehnika Stroj na kolesih Samo pri nas preizkušeno po DGUV V3 Priključek 400V, vtikač 16A-CEE Rabljena stroj, obnovljena z garancijo in servisom Ksdpfx Afjx N S Dao Tsdg Možnost: Vzdrževalna pogodba Servisni paket Uvajanje & zagon Veliko drugih dvigalnih gnetilcev imamo na zalogi!

Stanje: rabljeno, prevoženi kilometri: 313.680 km, moč: 265 kW (360,30 KM), prva registracija: 04/2014, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 05/2026, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 16 m³, Oprema: ABS, klimatska naprava, parkirni grelec, * ABS * ASR * Radio * Standheizung * Tempomat Kdsdpfx Afoxpza Uj Teg * Berganfahrhilfe * Fensterheber elektr. * Spiegel elektr. verstellbar * Spiegelheizung * Nebelscheinwerfer * Dachluke * Heckfenster * Fahrerkomfortsitz * Sitzheizung * Diff.- Sperre Vorderachse * Lift/Lenkachse * Stahlstoßstange * Luftansaug oben * Lufttrockner * Zentralschmierung * Anhängerkupplung * 2-Leiter Luftanschluss * 12-Gang * Federung: Blatt-Luft * Nutzlast:18312 * Dauerbremse: elektr. geregelte Motorbremse ----Aufbau: Meiller Abrollkipper RK 30.70 L für 5.25 - 7.4 mtr Container/Gesamtcontainerlänge, 30.000 kg Hubkraft, Funkfernbedienung, Schubarm, hydraulische + manuelle Containerverriegelung, Zusatzhydraulikanschlüsse hinten. Verkauf nur an Gewerbetreibende. BEI EXPORT IST NUR DER NETTOPREIS ZU BEZAHLEN !!!!! ALLE ANGABEN OHNE GEWÄHR INS. AUSSTATTUNG+ZUBEHÖR.Grundlage aller Kaufverträge, Rechnungen, Proforma-Rechnungen, Bestellungen, Verkaufsgespräche sind unsere AGBs (Siehe dazu Impressum).

Stanje: dober (rabljeno), Gearbox, spur gearbox, bevel gearbox, worm gearbox - Manufacturer: Bonfiglioli, gearbox type MVF 30/F - Gear ratio: i = 60 - Hollow shafts: Ø 11 x 24 mm / Ø 14 x 55 mm - Dimensions: 100/95/H115 mm Kjdpowa R Dgofx Af Tjdg - Weight: 1.1 kg

Stanje: dober (rabljeno), Centrifugal pump, high-pressure pump, water pump, multistage vertical centrifugal pump Kdodpfx Afedzryke Teg - Drive: 1.5 kW, 2910 rpm - Max. flow rate: 23.6 m³/h - Max. pressure: bar - Max. temperature: 100 °C - Quantity: 1x pump available - Dimensions: 250/300/H755 mm - Weight: 60 kg

Stanje: pripravljen za uporabo (rabljen), Gero F 100-200/12SO visoko-temperaturna peč 201101895 - 30 - 3000°C / dolžina zelenega kabla: 3,9 m, priključni kabel: 3,00 m, rabljeno, dobro ohranjeno, 100% funkcionalno, dobava po slikah. Kdsdpfx Aex Erpnsf Tsg

Stanje: rabljeno, številka stroja/vozila: 528FDF30-81101, Leto izdelave: 2021, obratovalne ure: 220 h, dvižna višina: 5.500 mm, vrsta goriva: dizel, napetost baterije: 12 V, dolžina vilic: 1.200 mm, Lastna teža: 4.730 kg Dvižna zmogljivost: 3.000 kg Gradbena višina: 265 cm Sprednje pnevmatike: SE Zadnje pnevmatike: SE Transportne mere (D x Š x V): 3,78x1,24x2,65 m Za dodatne informacije se obrnite na Karla Leitnerja. Mini ročica na sedežu, zadnje LED delovne luči, sedež MSG75, panoramsko ogledalo, DPF Kdjdpfx Afjray Scs Tog

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 2.000 h, Rabljeni ovijalni stroj Zambelli LFT 30 S/F Proizvajalec: ZAMBELLI, Italija – 2008. Model: LFT 30 Kapaciteta: 30 zavitkov/min Delovne ure: samo 2.100 Stroj je namenjen izključno za PET plastenke prostornin 1,5 – 2,0 – 2,5 l (pakeriranje 3×2) Ni primeren za manjše prostornine steklenic. Pakiranje s folijo, brez kartonskega podstavka. Stroj je še vedno priključen. Ohranjen v dobrem stanju. Splošni opis: Stroj za pakiranje v termo skrčljivo folijo, s kontinuirnim gibanjem, brez varilcev robov. Najnovejša generacija za srednje in visoke kapacitete proizvodnje. Maksimalna hitrost je odvisna od modela stroja, vrste izdelka in formata paketa. Posebne prednosti tega stroja: - Nobenih mehanskih delov na strani upravljavca, kar omogoča odlično dostopnost. - Mehanski deli so združeni na nasprotni strani od upravljavca, kar poenostavlja in pohitri tako redna kot izredna vzdrževalna dela. Rabljeni ovijalni stroj Velika izbira možnosti, tako v formatih kot v izvedbah. Enostavna in zelo hitra menjava formata. Elektronsko odvijanje in rezanje folije. Rezanje folije z rotacijsko rezilno enoto. Možna uporaba folije debeline od 40 μm do 80 μm. Možnost uporabe velikih kolutov folije za maksimalno neodvisno delovanje. Vse funkcije stroja nadzira in upravlja računalnik Zambelli. Stroj je popolnoma opremljen z varnostnimi zaščitami po veljavnih predpisih. Vse konfiguracije stroja omogočajo delo na več progah. Širok nabor opcij, vključno z: računalnikom za obdelavo proizvodnih podatkov, antistatično palico, registracijo tiska ipd. Računalnik je posebej uporaben za natančno načrtovanje preventivnega vzdrževanja stroja. Ksdevguwxepfx Af Tedg Upravljalne kontrole so centralizirane na vgrajeni komandni plošči. Vsi elektromotorji so zaščiteni z avtomatskimi magnetnotermičnimi stikali. Poseben poudarek pri načrtovanju je bil namenjen poenostavljeni uporabi in enostavnem vzdrževanju. Vsi mehanski deli so nameščeni na strani nasproti operaterja iz naslednjih razlogov: - Omogočajo minimalne ovire pri dostopu do izdelka. - Maksimalno poenostavijo vse redne in izredne vzdrževalne posege. - Zelo olajšajo delo na transportnih trakovih proizvoda, zlasti menjavo trakov. Delovni proces LFT 30 S/F: Izdelki pridejo do stroja preko dovajalnega traku, ki je poravnan z izhodnim delom. Ustrezen razporejevalnik razdeli zahtevano število vrstic v usmerjevalce dovoda. Senzor pred vhodom kontrolira količino izdelkov. Če količina vhodnih izdelkov pade pod minimalno nastavljeno vrednost, se stroj postopno upočasni in zaustavi.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, laserska moč: 30 W, najv. debelina jeklene pločevine: 80 mm, maks. debelina aluminijaste pločevine: 50 mm, The Durma HD-F 3015 Fiber Laser Cutting System with 30 kW, presented by Durma Maschinen GmbH, is a top-class fiber laser cutting machine designed for maximum precision and efficiency in metal processing. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH stands for quality, reliability, and outstanding customer service. Features: 30 kW / 80 mm mild steel, 50 mm stainless steel Kdedpfoq Nl T Tex Af Tsg Automatic nozzle centering Automatic nozzle changer with 26 stations Servo shuttle table Focal length F300 mm Conveyor system Technical Data: Power output: 30 kW Maximum sheet size: 3,048 mm x 1,524 mm Maximum sheet weight: 200 kg/m² Z-axis travel: 160 mm Maximum simultaneous speed: 170 m/min Maximum simultaneous acceleration: 2.8 G Positioning accuracy: +/- 0.02 mm Repeatability: +/- 0.02 mm Product Description of the Durma HD-F 3015 30 kW: Powerful and Efficient: Equipped with a 30 kW fiber laser, the Durma HD-F 3015 delivers outstanding cutting performance and precision for a variety of materials, including steel, aluminum, and copper. Generous Working Area: With a working area of 3,000 x 1,500 mm, this machine is ideal for processing both large and small workpieces. Advanced CNC Control: The user-friendly and precise control system allows for easy operation and optimizes cutting paths to minimize material waste. Automatic Nozzle Changer System: This feature increases productivity and reduces downtime during nozzle changes. Energy Efficient: The laser boasts high energy efficiency, resulting in lower operating costs. Robust Construction: The machine is designed for durability and reliability, even under demanding working conditions. Safety: Comprehensive safety features ensure secure operation. Versatility: Compatible with various laser cutting software solutions, making it suitable for multiple industries. Durma Maschinen GmbH – Your Reliable Partner: As the manufacturer of the Durma HD-F 3015, we at Durma Maschinen GmbH are proud of our rapid and efficient service as well as our extensive spare parts supply. With locations in Münster and Staufenberg, we guarantee 100% availability and fast response times to ensure our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting requirements. Interested in the Durma HD-F 3015 30 kW? Contact us for a non-binding consultation or a customized offer. At Durma Maschinen GmbH, we are happy to assist you with any questions and to find the best solution for your needs. We look forward to your inquiry!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Na voljo je Frey vpenjalna naprava K-2/30 v skoraj novem stanju, vključno z 2 polnilnima cevema. Več informacij na zahtevo. Kdsdpow Tm Rzsfx Af Tsg Na voljo več kosov. Plačilo z gotovino ali predplačilom. Prodaja samo podjetjem, brez garancije ali jamstva.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Ta laminirni stiskalnica F&O 03035 je bila izdelana leta 2003. Ima delovno širino 1300 mm in talilno enoto s kapaciteto 200 kg. Odpeljni valjčni transporter je dolg približno 9000 mm. Leta 2024 je bil dovodni transporter nadgrajen s 4 ščetkami in sevalnimi grelci. Razmislite o možnost nakupa te laminirne stiskalnice F&O 03035. Za več informacij nas kontaktirajte. Vrste uporabe Stiskanje / Laminiranje Kdedpfx Ajx Tkazjf Teg

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 500 Ah, napetost baterije: 80 V, skupna višina: 627 mm, skupna dolžina: 1.025 mm, skupna širina: 708 mm, Tested forklift battery for your forklift – 80V 4PZS 500Ah – DIN A + 1 year warranty + including Aquamatic system + including end cable & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and more: Kdodpfx Aswzvzyof Tjg Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - top battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Common battery sizes are available, please inquire. Transport available.

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 465 Ah, napetost baterije: 80 V, skupna višina: 798 mm, skupna dolžina: 1.228 mm, skupna širina: 478 mm, Tested forklift battery for your forklift – 80V 3PZS 465 – Special tray + 1-year warranty + Including Aquamatic watering system + Including end discharge cable & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,228 mm Width 478 mm Height 798 mm Weight: approx. 1,210 kg Suitable for the following models and others: Jungheinrich EKX 514 Kedpfxowzvz Hs Af Tsdg Jungheinrich ETX Jungheinrich ETX 514 Toyota FBM16 Toyota FBMF16 Bradshaw T20 Dimos EFY3504R Heli CPD 30 Common battery sizes available – please inquire. Transport possible.

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 620 Ah, napetost baterije: 80 V, skupna višina: 784 mm, skupna dolžina: 1.025 mm, skupna širina: 708 mm, Tested forklift battery for your forklift – 80V 4PZS 620AH – DIN A + 1-year warranty + Incl. aquamatic (automatic watering system) + Incl. end connectors & REMA 320 plug (other plugs can be installed upon request) + Capacity: min. 90-100% (C5 capacity report will be included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and others: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Kdedpfx Ajwzvy Nof Teg Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 - side load Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side load Linde P 250 SWB - 5007-10 - vertical change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available – please inquire. Transport possible.

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 775 Ah, napetost baterije: 80 V, skupna višina: 784 mm, skupna dolžina: 1.024 mm, skupna širina: 852 mm, Tested forklift battery for your forklift truck – 80V 5PZS 775AH – DIN A + 1-year warranty + Including Aquamatic (automatic water refilling system) + Including end cell connectors & REMA 320 plug (alternate connectors available on request) + Capacity: minimum 90–100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following (and other) models: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S-336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P-325-00 Linde E30 SH-1276-00 Linde E35/600H-388-00 Linde E35 H-/HL-387-00 Linde E35 P-337-00 Linde E35 RHL-387-00 Linde E35 SH-1276-00 Linde E40-337-00 Linde E40 C-388-00 Linde E40 P-337-00 Linde E45/C/600H-388-00 Linde K 5231-00 / side loader Linde P250-127-00 Linde P250L-127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB 35N Kdodpfjwzvxrex Af Tsg Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Common battery sizes available, please inquire. Transport can be arranged.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Weishaupt RGMS 30 dual-fuel burner gas + heavy oil Output: 2,600 kW Year: 2008 Kdodpemnqbwsfx Af Teg Viewing by prior telephone arrangement only! Preferred sale to dealers, businesses, or for export. All information provided without guarantee; subject to error and prior sale. The seller assumes no liability for typing or data transmission errors. Of course, we will also take care of all necessary paperwork. Loading possible.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration / Trade Show / New Machine Robust construction for long service life Infeed height: 200 mm Infeed width: 500 mm Number of chipping knives: 2 pcs Number of counterknives: 1 pc Rotor diameter: 520 mm (solid steel rotor) Number of infeed rollers: 3 pcs Throughput capacity: up to approx. 20 stacked cubic meters/hour* Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Infeed roller drive power: 2 x 2.2 kW Operating/control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW, number of knives, and infeed method S&F chippers and drum chippers with horizontal infeed are used in many sectors of the wood processing industry (sawmills, timber plants). The “ATH” series chippers produce high-quality, homogeneous wood chips with low fines content from wood residues, e.g., as premium chips for the pulp industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible application - Custom manufacturing Do you need further information? Contact us! We are happy to advise you. Kedpfjw I R Rnex Af Tsdg Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Shredder

Stanje: novo, Leto izdelave: 2026, Drum Chipper Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chipping machines and drum chippers with horizontal feed are widely used throughout the wood processing industry (sawmills, timber plants). Chippers of the "ATH" series produce high-quality, homogeneous wood chips from residual timber with a low proportion of fines—for example, as premium chips for the pulp industry or fuel chips for energy generation. Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 Kjdpfjwbv Erox Af Tedg - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 units - Number of counter knives: 2 units - Rotor diameter: 520 mm - Number of feed rollers: 3 units - Throughput capacity: up to approx. 40 loose cubic meters/hour * - Chip length: 5 - 50 mm - Main drive power: 22 - 110 kW - Feed roller drive power: 2 x 2.2 kW - Operating/Control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *Depending on chip length, kW of main motor, number of knives, and material feed. Advantages: - Maximum throughput - Low fines content - Low-maintenance - Versatile application - Custom manufacturing Need more information? Contact us! We are happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Crusher

Stanje: novo, Leto izdelave: 2026, Drum Chipper Series ATH 300 S&F chippers and drum chippers with horizontal feed are used in many sectors of the wood processing industry (sawmills, wood factories). Chippers of the "ATH" series produce high-quality, homogeneous wood chips with a low proportion of fines from residual wood, e.g. as premium wood chips for the pulp industry or as fuel chips for energy generation. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of feed rollers: 3 pcs - Throughput capacity: up to approx. 70 cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Feed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, feeding Advantages: - Maximum throughput - Low proportion of fines - Low maintenance - Versatile applications - Custom manufacture Do you need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher Kdodpfsuz Hmxjx Af Tog

Stanje: dober (rabljeno), The scope of delivery includes: 06x steel panels, used Manufacturer: SSI Schäfer Total depth: approx. 960 mm Internal depth: approx. 955 mm For frame depth: 950 mm Ksdjv R T Epopfx Af Tedg Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material finish: sendzimir galvanized Frame profile: approx. 300 x 40 x 20 mm Weight per piece: approx. 7.94 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. Any additional transport or shipping of this item is subject to additional costs, which can be provided upon request depending on the delivery location and scope of delivery.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.205 mm, skupna širina: 1.000 mm, skupna višina: 1.890 mm, 30 visečih regalov iz nerjavečega jekla za zorenje mesa, prej uporabljani za obešanje choriza. Regali so zložljivi eden na drugega. Skupne dimenzije – 1205 mm dolžina x 1000 mm širina x 1890 mm višina. Kdedpfox Tg Axsx Af Tsg

Stanje: zelo dobro (rabljeno), 30 running meters of shelving rack Schäfer Type R3000 Used equipment, as good as new, see pictures Height: 2.5 m Depth: 80 cm Load capacity/shelf: 250 kg Bay width: approx. 128 cm Negotiation price: € 7,550 net ex stock Offer includes: 24 uprights or frames, 2.5 m, galvanized 144 shelves, 250 kg load capacity each, galvanized 9 cross braces for stabilization 6 levels per bay (more levels available at additional cost) Also available with bay width of 100 cm! Other configurations possible. Heights of 2.5 m or 3.5 m available. Goods in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. More information on request. Always over 5,000 running meters of pallet racks from various manufacturers in stock. Kdedpsd Nf Svefx Af Tsg (Subject to changes and errors in technical data, details, and prices, as well as prior sale! See our GTC, all prices excl. VAT ex stock) Purchase / Sale: We are constantly looking for or offering numerous items from various sectors broom-clean liquidation of business premises business closures Fast – flexible – effective! We also clear or dispose for insolvency administrators. Contact us with a few keywords and we will get back to you promptly. To visit our website, please click on our logo!

Stanje: dober (rabljeno), Approx. 30 linear meters of shelving system Schaefer R3000 Manufacturer: Schaefer R3000 Condition: As new, see photos. More than 300 meters available in stock. Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load capacity per shelf, bay width approx. 100 cm Asking price: €2,890.00 net ex-works Scope of supply: 31 upright frames, 2.5 m, galvanized 90 shelves, 100 kg load capacity per shelf, galvanized 10 cross braces for stabilization 3 shelf levels per bay (additional levels available at extra cost) Other configurations possible. Heights available: 2.3 m, 2.5 m, or 3 m. Goods are in stock. We always have over 3,000 linear meters of pallet racking from various manufacturers in stock. Transport and assembly available upon request. Further information available on request. (Subject to change and errors in technical data, specifications, and prices. Sale subject to prior sale. Please refer to our terms and conditions. All prices exclude VAT, ex-works.) Purchase / Sale: We are continuously buying and selling a wide range of items from various sectors. To visit our website, please click on our logo! - Swept clean business clearances Kjdpfxjcfhx Ts Af Tedg - Company liquidations - Fast – flexible – efficient! We also clear out and/or dispose of inventory for insolvency administrators. Please send us a brief inquiry, and we will get back to you promptly.