Baz Vodoravno nakup rabljenega (310)

Stanje: rabljeno, Grinding length: 650 mm Grinding width: 450 mm Workpiece height: 425 mm (without magnetic chuck) Max. workpiece weight: 600 kg Machine weight approx.: 3.8 t Total power requirement: 15 kW Machine dimensions approx. W x H x D: 3.0 x 2.4 x 2.3 m Used/overhauled surface grinding machine, manufacturer GER, type RSA-650. Automatic feed on all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy verified. SCOPE OF OVERHAUL: Iedefkg H Tjpfx Adkstd Machine completely dismantled, all components thoroughly cleaned and checked for full functionality. Main spindle re-bedded with new bearings, runout 3 µm. All guideways hand-scraped to new machine geometry. Worn parts replaced, defective components repaired or replaced. Reassembly, complete function check and internal acceptance. Machine repainted. Machine in flawless, production-ready condition. MEASURED GEOMETRICAL ACCURACIES: Current geometrical accuracy after overhaul, tested with dial gauge Geometry of X and Z machine axes X = longitudinal axis 650 mm Z = cross axis 450 mm Measurement performed with dial gauge across magnetic chuck. X-axis = max. deviation 0.008 mm Z-axis = max. deviation 0.005 mm INCLUDING THE FOLLOWING ACCESSORIES: - Electro-magnetic chuck, with fine longitudinal pole spacing Dimensions 600 x 400 mm - Demagnetizing device - Complete coolant system with paper band filter - Digital readout for vertical axis (Y-axis), manufacturer Sony - Technical documentation in English - 1 grinding wheel arbor - 1 used grinding wheel - 1 grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) cross feed - 1 set of levelling elements For further information, please refer to the attachment. Payment: 100% prior to loading the machine Warranty: 6 months on machine geometry and demonstrably installed new parts. No general statutory warranty.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4314, moč: 15 kW (20,39 KM), Dovozna dolžina : 1800–6000 mm Širina obdelovanca : 75–320 mm Itodeu Nuh Topfx Adkjd Debelina obdelovanca : 20–165 mm Odhodna dolžina : 750–6000 mm Dolžina odpadka : 400 mm Dovodna hitrost do : 190 m/min Višina mize : 1000 mm Premer žaginega lista : 700 mm Moč motorja žage : 15 kW Moč za podajanje žage : 3,6 kW Vodoravni in vzdolžni transportni trakovi za podajanje

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 29-0288, Offer 04612 Technical specifications: - Cutting capacity at 90° round: 260 mm - flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - flat: 240 x 200 mm - Machine is mounted on original swiveling base - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure infinitely variable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm Itsdpjgin Ndofx Adkjd - Weight approx.: 500 kg

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirements approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw designed for high-speed cutting with pusher system P15. Optionally with P30 Hydraulic lowering of the saw frame • NC controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved using the new "B&S positioning system". An intelligent NC control system ensures smooth interaction between the linear encoder and the self-braking positioning motor in combination with a reliable hydraulic brake by means of large-radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC control CNC control allows the programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side clamping positioning system The B&S pusher system – feed and positioning system – is equipped with Itjdpfofg E Hnex Adkjd "double-sided opening grippers" which are hydraulically operated. This guarantees safe gripping and transport of materials and bundles that deviate slightly from their ideal shape. The pusher system is independently mounted and guided via ball-bearing linear guides, precision ground rack, and a frequency-driven, robust gear motor.

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cut width: 300 x 180 mm Isdsfn Andepfx Adkstd Speeds: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirement: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: extremely quiet and low-vibration operation • Hydraulically operated vice, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vice and machine cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller on infeed side • Ball-bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material start or, for serial cutting, start cutting immediately 4. Stop saw band 5. Raise frame slightly above the material 6. Open vice

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL OFFER PRICE!!!! 2-Column Heavy-Duty Bandsaw Machines of the SBS Series The SBS series impresses with advanced technology, high quality, durability, and an unrivalled comprehensive standard configuration. • Modern SNC 20 controller for CNC models • Frequency-controlled saw drive • Control buttons featuring pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure adjustment • Double vice (in front of and behind the band) • Creep speed for positioning • Bundle clamping prepared for electric and hydraulic operation • Chip conveyor Iedpfsfb Nbfsx Adkotd The SNC 20 controller allows convenient and straightforward input of up to 20 different cutting programs (length and quantity). When the target dimension is entered, the control system automatically calculates the trim loss and the number of feed strokes. Furthermore, the error code display system provides rapid diagnosis for troubleshooting.

Stanje: novo, Cutting range at 90 degrees: round 310 mm Cutting range at 90 degrees: square 280 mm Cutting range at 90 degrees: rectangle 400x250 mm Saw blade length 4020x34x1.1 mm Blade speed 18 - 100 m/min Table height 890 mm Total power requirement 2.2 kW Machine weight approx. 0.99 t Space required approx. 1.85 x 2.2 x 2.0 m Mitre Band Saw, Fully Automatic, GBS 310/400 VA-I CNC - Mitre left 45° automatic operation - Mitre left 60° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gearbox cast in one piece, ensuring very quiet and low-vibration operation - Removable chip tray (for cleaning/disinfection) - Impact-resistant and ergonomic control panel with oil-resistant EPDM cover - Excellent access to saw, material, and feed unit - Folding safety cover - Fine adjustment for feed - Semi-automatic cutting Isdsd Iiprepfx Adkstd - Optimize workflows with CNC control: possibility to input various parameters such as quantities and material lengths, automatic calculation of the cutting channel - CNC control for 10 different sawing programs, each with up to 99 subprograms for different lengths and quantities, e.g. one cutting program with various section lengths - Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm up to 9,999 mm, remnant length 170 mm.

Stanje: novo, Cutting capacity at 90 degrees (round): 240 mm Cutting capacity at 90 degrees (square): 240 mm Cutting capacity at 90 degrees (rectangular): 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.4 t The Z252/DGH is equipped with: - Hydraulic semi-automatic operation Itodpfxjfgyh He Adkod - Double mitre, 60° left / 45° right - Emulsion pump - Machine base - Saw blade - 400V, 16A plug The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting area at 90 degrees (round): 227 mm Cutting area at 90 degrees (square): 220 mm Cutting area at 90 degrees (flat): 260 x 220 mm Cutting area at 45 degrees (round): 150 mm Iodpfx Adsfgyh Esketd Cutting area at 45 degrees (square): 145 mm Cutting area at 45 degrees (flat): 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw - automatic cutting - base frame - coolant pump - chip brush for saw blade cleaning - quick-adjust vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Band speed 18 – 100 m/min Table height 940 mm Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy Iedjfgyiajpfx Adketd - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion Ijdpfofgyicsx Adkstd • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangle 1250x600 mm Saw band length: 8140x54x1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Itedpfxjfgyige Adked Total power requirement: 7.5 kW Machine weight approx. 4.96 t Space requirement approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (optional). Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams as well as solid material. The material is clamped vertically on both the infeed and outfeed sides. Starting from model K-tech 800 H, the machine is equipped as standard with an additional horizontal vice. The interplay of hydraulic saw frame descent, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut" cutting system with minimum quantity lubrication. This reduces cleaning requirements and conserves resources. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning unit, is equipped with 'double-sided opening clamping jaws' which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate somewhat from the ideal shape. The pusher system is built separately and is guided via ball-bearing linear guides, precision-ground rack, and a frequency-driven, robust geared motor.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller Iedjfg E Hlepfx Adkotd • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor Iedpfxsd Iipxs Adkotd - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Ijdpjd Iip Nefx Adkstd Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangle 820x610 mm Cutting range at 45°: round 550 mm Cutting range at 45°: square 550 mm Cutting range at 45°: flat 550x600 mm Cutting range at 60°: round 370 mm Cutting range at 60°: square 370 mm Cutting range at 60°: flat 370x600/450 mm Saw blade length: 7260 x 41 x 1.3 mm Band speed: 15 – 100 m/min Isdpfx Aofg E Hmedketd Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double miter band saw for high-speed cutting with pusher system P15, option P30 Hydraulic saw frame lowering - NC controlled - Automatic angle positioning from +60° to -60° High-quality automatic miter adjustment Specially designed for cutting profiles and beams. The highest positioning accuracy is achieved with the new "B&S positioning system". An intelligent NC control ensures smooth coordination of linear encoder and self-braking positioning motor, in combination with a reliable hydraulic brake via large-radial center positioning. The work table is mounted via high-quality preloaded bearings, ensuring very smooth rotation. CNC control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities, and miters. Dual-side gripping positioning system The B&S pusher system, feed and positioning system, is equipped with 'dual-side opening grippers' which are hydraulically actuated. This guarantees secure gripping and conveying of materials and bundles that deviate from ideal form. The pusher system is constructed separately and is guided by ball-bearing linear guides, ground rack, and a frequency-driven, robust gear motor.

Stanje: novo, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band length: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions L x W x H: 2,675 x 2.15 x 2.05 m SPECIAL PRICE!!!! 2-column high-performance bandsaw machines of the SBS series The SBS series impresses with advanced technology, high quality, durability, and a uniquely comprehensive standard equipment package. • Modern SNC 20 control for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the band) Iodpsfg E Hvefx Adkotd • Inch mode for positioning • Bundle clamping, prepared for electric and hydraulic operation • Chip conveyor The SNC 20 control allows convenient and simple input of up to 20 different cutting tasks (length and quantity). Upon entering the desired dimensions, the controller automatically calculates the trim cut and the number of feed strokes. In addition, the error code display system enables quick analysis for troubleshooting.

Stanje: novo, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 – 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirements approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS - Mitre left 45° in automatic mode - Mitre left 60° in semi-automatic mode (cuts without programming) - Impact-resistant and ergonomic control panel with oil-resistant EPDM cover - Material height sensor (automatic cutting start detection) - One-piece cast frame and gearbox for extremely quiet and low-vibration operation - Removable chip tray (easy cleaning/disinfection) - Excellent accessibility to saw, material, and feed unit - Hinged safety cover - Fine adjustment for feed rate - Semi-automatic cutting! Automatic sawing with microprocessor control Selectable for 2 programmable levels Semi-automatic operation Fully automatic operation Start cycle after input of desired quantity and material length: material approach, cutting, and piece counting until program fulfillment - MPS control system for input of required number of feed cycles - All essential machine data displayed on the LED display during the cutting process (current draw, cutting time, piece count) - Entered data is retained in RAM memory Iodpfxjd Iip Ae Adkotd - The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process - Floating feed unit - Length adjustment using handwheel and vernier scale with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm or, using the reversing automatic, 1–29 repetitions, remnant length 210 mm

Stanje: novo, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400x330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-column high-performance automatic band saws of the SBS series The SBS series impresses with advanced engineering, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 controller for CNC models - Frequency-controlled saw drive - Control buttons with pictograms - Work light - Powered chip brush - Hydraulic blade tensioning - Clamping pressure regulation - Double vice (in front of and behind the band) - Inch mode for positioning - Bundle clamping, pre-configured electrically and hydraulically - Chip conveyor Iodpjfb Nbgofx Adkotd The SNC 20 controller enables user-friendly and straightforward input of up to 20 different sawing tasks (length and quantity). When entering the desired measurement, the controller automatically calculates the saw cut allowance and the number of feed strokes. Additionally, the error code display system provides rapid fault analysis for troubleshooting.

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Iodofgyh Sspfx Adketd Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. Iedpfxofg E Hpj Adkotd - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.8 t Dimensions L x W x H: 3.0 x 2.15 x 2.2 m SPECIAL PRICE!!!! 2-column high-performance band saw machines of the SBS series The SBS series stands out thanks to advanced technology, high quality, durability, and an unrivalled, extensively equipped standard specification. - Modern SNC 20 control system for CNC models - Frequency-controlled saw drive - Operation buttons with pictograms - Work light - Driven chip brush - Hydraulic blade tensioning Itjdsfg E Hwepfx Adked - Clamping pressure regulation - Double vice (in front of and behind the blade) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 control enables convenient and simple programming of up to 20 different sawing tasks (length and quantity). When entering the nominal dimension, the control system automatically calculates the cutting waste and number of feed strokes. Additionally, the error code display system allows for rapid troubleshooting and diagnostics.

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Miter cut left 60° / right 45° • Heavy-duty industrial hydraulics, 18 bar Ijdpfxjd Iipts Adkstd • Optimal access to the workpiece • Ammeter for monitoring: - Cutting force optimization - Blade life - Cut accuracy • Hydraulic vice: automatic clamping and release • Swarf removal brush • Material turntable with ball bearings • Quick-release vice, movable • Height sensor for material (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material, or for serial cuts, start cutting immediately 4. Saw blade stops 5. Raise saw frame slightly above material 6. Release vice

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine Isdpfx Aofm T Hbsdketd • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m Iteded Iip Repfx Adkod SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR