Bar Polica nakup rabljenega (16.092)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments Nodpjh R Taqsfx Agxswf - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) Nedpfsmhhypox Agxjwf - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) Nodpfxomhh Dho Agxewf - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth Njdpfjmhh Dzjx Agxowf - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: Nwsdpfx Ajfdkb Tjgxef - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg Nwsdpfx Agsmhh Ansxsf - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany Njdpfx Asguk A Hogxewf - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. Nodpfoguk Dkex Agxjwf When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation Nwodpemhhy Nsfx Agxef - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. Nodpfx Asmhh Dtjgxswf According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Nedpfx Agjguk Dvexowf - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Leto izdelave: 2004, stanje: rabljeno, Premer palice: 6 - 120 mm Dolžine palic: 100 - 1.600 mm Največja masa palice: 63 kg Podajalna dolžina: 1.000 mm Vzdolžni pomik: 600 mm Teža stroja: pribl. 600 kg Nwodpfx Ajyhhrijgxef Potreben prostor: pribl. 2,2 x 1,5 x 1,5 m Trenutni prikaz delovnih ur: 4.867 ur

Stanje: rabljeno, 3-čeljustna klinična vpenjalna glava FORKARDT Tip HGF 160-45-3 HI GRIP Št. 109452 Nwjdpfx Agsy Ehypjxjf Premer: 165 mm Notranji premer: 46 mm Valjasta centrirna prirubnica: Ø 140 mm Hitrost: maks. 5500 vrt/min - Klinična vpenjalna glava s centralno nastavljivimi vpenjalnimi čeljustmi - 1 komplet stopničastih čeljusti, obračljivih za vrtanje in struženje (obrnjene za 180°) - 3 montažne izvrtine Ø 11 mm, razmak 105 mm Teža: 9,3 kg zelo dobro stanje, kot novo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R6L211501, EMCO Turn S65 TM – 2-Axis CNC Lathe with EMCO SL1200 Short Bar Loader - 2-axis CNC lathe without tailstock, featuring driven tools and C-axis - 18 kW drive power - 0–4200 rpm spindle speed - Linear guide system - Digital drive system - Direct spindle encoder Nwedeyzn H Uspfx Agxjf - Sinumerik 828D with ShopTurn conversational programming Equipment - 12-station VDI 30 turret with axial tool holders and directional logic for up to 12 driven tools (5 kW, 20 Nm, 0–5000 rpm) - C-axis for main spindle - Mechanical spindle brake (min. increment 0.01°) - Spindle head size 65 with spindle connection KK6 (DIN 55026) - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Hydraulic unit - Interface for chip conveyor - Documentation Additional Features - EMCO SL1200 short bar loader ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product but also tailored financing options to suit your needs. Whether down payment, installment plan, or individual financing models – together, we’ll find the right solution. If desired, we can also take care of the entire transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Please feel free to contact us for further information or a non-binding quote. We provide expert and personal advice. ----- Subject to change, errors and prior sale.

Stanje: rabljeno, Leto izdelave: 1996, CNC stružni center Victor Vturn-20, 10-postajni nosilec orodja, CNC Fanuc Series 0-T, transporter za odrezke, vgrajena zračna delovna miza, s podajalnikom palic Hydrafeed Multifeed MLI, serijska številka 2766 (1996) Nedpfx Asyhw U Dogxowf

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R2EU2002, CNC stružnica z glavnim vretenom in 12-pozicijskim revolverjem Proizvajalec: EMCO TURN E45 Leto izdelave: 2002, serijska številka R2EU2002 Krmiljenje: Siemens, tip Sinumerik Njdpjyzn N Nefx Agxjwf Podajalna naprava: EMCO Compact Load E45 Premer struženja: 220 mm Transporter za ostružke: Knoll Privlačna ponudba – prilagodljivo in brez skrbi Ponujamo vam ne samo kakovosten izdelek, temveč tudi prilagojene možnosti financiranja, ki ustrezajo vašim potrebam. Ali predujem, obročno plačilo ali individualni finančni modeli – skupaj bomo našli pravo rešitev. Na željo za vas prevzamemo tudi celotno organizacijo prevoza. Od načrtovanja do zanesljive dostave poskrbimo za nemoten in pravočasen potek, da vam ni treba skrbeti za nič. 📞 Za dodatne informacije ali nezavezujočo ponudbo nas kontaktirajte. Svetujemo vam osebno in strokovno.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1323, CNC stružnica Star SR-32J Leto izdelave: 2011, Serijska številka: 1323 Krmilnik: Fanuc, tip 18i-TB Polžnik za palice: FMB Turbo 3-36 Transporter ostružkov: Mayfran CO2 gasilni sistem: Kraft & Bauer ----- Privlačna ponudba – prilagodljivo in brez skrbi Nwjdjyznvpspfx Agxsf Nudimo vam ne le kakovosten izdelek, temveč tudi financiranje po meri, ki je prilagojeno vašim potrebam. Predplačilo, obročno plačilo ali individualni finančni modeli – skupaj najdemo ustrezno rešitev. Po želji prevzamemo tudi celotno organizacijo prevoza. Od načrtovanja do zanesljive dostave poskrbimo za nemoten in pravočasen potek, tako da vam ni treba skrbeti za nič. 📞 Za dodatne informacije ali neobvezujočo ponudbo nas kontaktirajte. Svetujemo vam osebno in strokovno.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1324, CNC dolgostrajni avtomat Star SR-32J Leto izdelave: 2011, Serijska številka 1324 Krmiljenje: Fanuc, tip 18i-TB Polnilnik palic: FMB Turbo 3-36 Transporter ostružkov: Mayfran CO2 gasilni sistem: Kraft & Bauer ----- Privlačna ponudba – prilagodljivo in brez skrbi Ponujamo vam ne le visoko kakovosten izdelek, temveč tudi prilagojene možnosti financiranja, ki ustrezajo vašim potrebam. Plačilo akontacije, obročno odplačevanje ali individualni finančni modeli – skupaj bomo našli pravo rešitev. Na željo prevzamemo tudi celotno organizacijo transporta. Od načrtovanja do zanesljive dostave poskrbimo za nemoten in pravočasen potek, da se vam ni treba ukvarjati z ničemer. Nedpfx Ageyznurexewf 📞 Za več informacij ali nezavezujočo ponudbo nas kontaktirajte. Z veseljem vam bomo osebno in strokovno svetovali.

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: XW-2011-DW-0020-NH, HANWHA XD20 II-V, letnik 2021, krmilnik Fanuc, rabljeno, zelo dobro ohranjeno, brezhibno, pod napetostjo, z avtomatskim podajalnikom palic IEMCA BOSS 338/32-HD, letnik 2021. Prodaja zaradi zaključka projekta, ogled po dogovoru. Nwedpfex Dbxmex Agxof

Stanje: rabljeno, prevoženi kilometri: 56.282 km, moč: 207 kW (281,44 KM), prva registracija: 06/2019, vrsta goriva: dizel, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 08/2026, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna širina: 2.550 mm, skupna višina: 3.650 mm, dolžina tovornega prostora: 7.250 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.400 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), klimatska naprava, Flatbed truck with sliding tarp and Bär 1.5-ton aluminum tail lift • ABS • ASR (traction control) • Rear axle differential lock • Exterior sun visor • Comfort air-sprung driver’s seat • Radio CD • Automatic transmission • Rear axle air suspension • Front axle leaf suspension • Electric window lifters for driver and passenger doors • Reversing camera • Double passenger bench • Roof-mounted cab air deflector • Spare wheel bracket with spare wheel • Rockinger trailer coupling • Two-line trailer brake connection • Adjustable and heated side mirrors • Aluminum side walls • Rear axle stabilizer • Reinforced batteries • Adjustable steering column mount • Cruise control • Engine brake Nodsy Eayuepfx Agxowf • Plastic toolbox • Plastic fuel tank with locking cap • Wheelbase: 5,100 mm • Gross weight: 14,000 kg • Payload: 7,085 kg • Tires: 285/70R19.5, 50-60% Vehicle ID for inquiries: 2452 The vehicle is in very good overall condition, regularly serviced. No liability for typographical and data transmission errors. Subject to prior sale and errors. We buy vehicles, construction machinery, trailers, and semi-trailers from model year 2000–2026 daily for cash. Leasing and financing available through our partner bank. Rental possible. Nationwide delivery available.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1251, CNC stružnica z glavno in protivreteno ter podajalnikom palic Proizvajalec: Star, tip SR-32J Letnik: 2011, serijska številka 1251 Krmiljenje: Fanuc, tip 18i-TB Podajalec palic proizvajalca FMB, tip Turbo 3-36, transporter odrezkov proizvajalca Mayfran, CO2 gasilni sistem proizvajalca Kraft & Bauer Nwedpfx Aeyzmxpegxof ----- Privlačna ponudba – prilagodljivo in brez skrbi Ponujamo vam ne le visokokakovosten izdelek, temveč tudi individualne možnosti financiranja, ki se prilagodijo vašim potrebam. Naj gre za polog, obročno odplačevanje ali individualno finančno rešitev – skupaj najdemo pravo možnost. Po želji prevzamemo tudi popolno organizacijo transporta. Od načrtovanja do zanesljive dostave zagotovimo gladek in pravočasen potek, da se vi ne obremenjujete. 📞 Kontaktirajte nas za več informacij ali nezavezujočo ponudbo. Z veseljem vas osebno in strokovno svetujemo.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1306, CNC stružnica z glavno/vzporedno glavo in podajalcem palic Znamka: Star, tip SR-32J Leto izdelave: 2011, serijska številka 1306 Krmiljenje: Fanuc, tip 18i-TB Podajalnik palic znamke FMB, tip Turbo 3-36, transporter za odrezke znamke Mayfran, CO2 gasilni sistem znamke Kraft & Bauer ----- Privlačna ponudba – prilagodljivo in brez skrbi Ponujamo vam ne le kakovosten izdelek, temveč tudi prilagojene možnosti financiranja glede na vaše potrebe. Predplačilo, obročno plačilo ali individualni finančni modeli – skupaj bomo našli pravo rešitev. Na zahtevo prevzamemo tudi celotno organizacijo prevoza. Od načrtovanja do zanesljive dostave poskrbimo za nemoten in pravočasen potek, tako da vam ni treba skrbeti za nič. 📞 Za dodatne informacije ali nezavezujočo ponudbo nas kontaktirajte. Nwodpfoyzmv Iex Agxjf Z veseljem vas strokovno in osebno svetujemo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2581050050, CNC stružnica Tornos Swiss DT26 Leto izdelave: 2016, serijska številka 2581050050 Krmiljenje: Fanuc, tip 31i-model B Podajalnik palic: Robobar SBF326 Maks. premer struženja: 195 mm Transporter za ostružke in filtracijska naprava z netkano tkanino: Knoll CO2 gasilni sistem: Kraft & Bauer ----- Privlačna ponudba – prilagodljivo in brez skrbi Ponujamo vam ne le kakovosten produkt, temveč tudi prilagojene možnosti financiranja, ki ustrezajo vašim potrebam. Avans, obročno plačilo ali individualni finančni model – skupaj bomo našli ustrezno rešitev. Po želji prevzamemo tudi celotno organizacijo prevoza. Od načrtovanja do zanesljive dostave poskrbimo za nemoten in pravočasen potek, da boste brez skrbi. Nwedpfx Aeyzmu Dogxof 📞 Kontaktirajte nas za več informacij ali nezavezujočo ponudbo. Svetujemo vam strokovno in osebno.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2581050051, CNC stružnica Tornos Swiss DT26 Leto izdelave: 2016, serijska številka 2581050051 Krmiljenje: Fanuc, tip 31i-model B Nalagalnik: Robobar SBF326 Maks. stružni premer: 195 mm Transportni trak za odrezke in filtrirni sistem: Knoll CO2 gasilni sistem: Kraft & Bauer ----- Privlačna ponudba – prilagodljivo & brez skrbi Ponujamo vam ne le kakovosten izdelek, temveč tudi prilagojene možnosti financiranja, ki ustrezajo vašim potrebam. Naj gre za polog, obročno odplačevanje ali individualne finančne modele – skupaj bomo našli pravo rešitev. Nedpfxoyzmt To Agxswf Na vašo željo prevzamemo tudi popolno organizacijo prevoza. Od načrtovanja do zanesljive dostave zagotavljamo nemoten in pravočasen potek, tako da vam ni treba skrbeti za nič. 📞 Za dodatne informacije ali nezavezujočo ponudbo nas kontaktirajte. Svetujemo vam osebno in strokovno.

Stanje: dober (rabljeno), Okvir: 2750*1100 mm Prečke: 1800*80 mm 2800 kg/polica 2700*100/120 mm 2400-3000 kg/polica Če potrebujete police ali dodatno opremo v drugih sestavah ali izvedbah, nas prosim kontaktirajte. Nudimo obsežen program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema kot na primer: Okvirna, kotna in čelna zaščita, zaščite pred potiskanjem, iverne plošče, rešetkaste police, zadnje mreže, distančniki na voljo. Nedpjd Duc Tefx Agxswf Pošiljanje: Prosimo, povprašajte za stroške prevoza z navedbo vaše poštne številke, kraja in želene količine artiklov. Druge storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah ter cenah, kot tudi do predhodne prodaje!