Bagri Vedra nakup rabljenega (853)

Stanje: rabljeno, System for filling yogurt and curd into round plastic buckets of various sizes and for labeling these with self-adhesive wrap-around labels. The system consists of a separate filling/sealing block and a labeling unit. Filler/Sealer: The plastic buckets are taken from the stack in the bucket magazine and placed onto the conveyor belt. The buckets are sterilized with a hydrogen peroxide and steam heater before filling, and the lids are sterilized before sealing. A calibratable weighing cell doses the product into the buckets until a predetermined weight is reached. The sealer applies lids from the lid magazine onto the buckets and presses them on firmly. Labeler: Inline labeling machine for self-adhesive wrap-around labels. Suitable for various bucket sizes from 1 to 5 kg capacity. Additional info: Gravimetric dosing; Labeling of self-adhesive wrap-around labels Filler/Sealer output approx.: 450 units/h (based on 6-liter buckets), depending on container size and product viscosity Labeler output approx.: 1,080 units/h Dsdpfxjy Nnb Uj Aplscg Formats: Round plastic buckets from 1 to 10 liters Equipment: Bucket filling and sealing machine; Bucket labeling machine

Stanje: rabljeno, Leto izdelave: 2001, Filling and closing machine for filling yoghurt and quark into plastic buckets of various sizes. Plastic buckets are taken from the stack in the bucket magazine and placed onto the conveyor belt. Before filling, the buckets, and before closing, the lids, are sterilized using a heating cartridge with hydrogen peroxide and steam. A calibrated load cell fills the product into the buckets until a pre-set weight is reached. The closer picks lids from the lid magazine, places them onto the buckets, and presses them down firmly. Machine feature: gravimetric filling Output approx.: 450 units/hour based on 6.1-liter buckets; dependent on packaging size and product viscosity Power: 11 kW Voltage: 400 V Frequency: 50 Hz Heating/cooling: Steam 3 bar; 10 kg/h Compressed air: 6-8 bar; Qmax = 300 l/min Length: 3,708 mm Width: 968 mm Height: 2,442 mm Formats: 1.3-liter buckets (H = 132 mm, Dmax = 132 mm); 6.1-liter buckets (H = 195 mm, Dmax = 226 mm); 10-liter buckets also possible Direction of flow: left -> right Basic design: longitudinal runner Dedpjyvtrlofx Aplscg Equipment: filling head; closing head; bucket magazine; lid magazine; heating cartridge; load cell; protective housing with doors; control cabinet with push buttons and 12-inch touch display; product connection/CIP supply DN50; steam connection 1"; compressed air connection 3/8"; CIP return DN40

Leto izdelave: 1988, stanje: dober (rabljeno), Emmersealmachine Fabrikant: Soft Electronic Systems Type: Halfautomatische emmersealmachine Model: PMS 2 GH Capaciteit: Tot 300 emmers per uur Frame: Roestvrij staal Geschikt voor: Emmers tot Ø = 300 mm Afmetingen: L x B x H = 1.000 x 900 x 1.000 mm Gewicht: 150 kg Stroomvoorziening: 380 Volt – 50 Hz – 1,5 kW Perslucht: > 5,5 bar Kenmerken: - Handmatig positioneren van de emmer - Automatisch sealen (instelbare tijd) - Automatisch doorschuiven naar snij-inrichting Dcodpoigyp Hefx Apleg - Automatische aandrijving en roterend mes - Handmatig oprollen van de folie - Handmatig verwijderen van de emmer

Stanje: rabljeno, moč: 45 kW (61,18 KM), lastna masa: 5.500 kg, Leto izdelave: 2022, obratovalne ure: 215 h, gorivo: dizel, • Hidravlična hitra menjava Dcjdex Hky Iepfx Apljg • AUX linija • Samodejni prosti tek • Gorivna črpalka • Planirna žlica 1350mm • Nagibna planirna žlica 1350mm • Izkopna žlica 350 + 750mm

Stanje: zelo dobro (rabljeno), Langguth V 80 bucket destacker, destacker for destacking buckets bucket size from 2.5 to 20 l automatic handle orientation Dedpfx Apehikf Helecg Very good condition, straight from production!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, A complete packaging and palletizing line for buckets is available. 1) Bucket filling machine Vollenda 2VNES2-6-E, year of manufacture: 2009, bucket formats: 2kg–5kg, filling capacity 2kg/5kg: 1,200/800 buckets per hour. 2) Palletizing system Ehcolo EPL 160, year of manufacture: 2009, empty pallet magazine slots: 15, max. pallet dimensions X/Y/Z: 800mm/1200mm/1500mm, palletizing capacity 2kg/5kg buckets: 800/1,200 buckets per hour. 3) Wrapping machine Robopac Rotoplat 3000HD, year of manufacture: 2009, max. rotation speed: 12 rpm, max. wrapping height: 2,400mm, power: 11kW, weight: approx. 1,400kg. Documentation available. On-site inspection possible. Dcodpjumwgrefx Aplog

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 612631, Offer 22031 Technical specifications approx.: - Load capacity: 3.5 t - Distance between gripping arms adjustable via handwheel Dcsdpfx Apjnp Hxloljg - Tilting operation performed via handwheel - Min. distance between gripping arms: 970 mm - Max. distance between gripping arms: 2,590 mm - Container holding grippers bolted onto turntables - Min. distance between turntables without grippers: 1,090 mm - Max. distance between turntables without grippers: 2,710 mm - Container height from pivot point upwards approx. 1,100 / 1,250 mm - Turntable without gripper: Ø 400 mm - Gripping arm opening each: H 150 x H 150 mm - Cross beam dimensions approx.: L 3,350 x H 2,000 x D 500 mm - Weight approx.: 670 kg

Stanje: dober (rabljeno), Lid seaming machine, folding machine, folding automation, lid seaming automation, can seaming automation, can seaming machine Dcsdpfxeb A H R Ej Apljg - Lid seaming machine for tinplate buckets - The machine produces the seam for the lid - Dimensions: 1000/1200/H1150 mm - Weight: approx. 800 kg

Stanje: novo, Leto izdelave: 2022, PROJECT PALLETIZING SYSTEM FOR BUCKETS Djdshu Rt Ajpfx Aplocg KUKA palletizing robot with triple gripper for buckets and bucket infeed conveyor - 1 KUKA robot - KR 210 with KRC2

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, - Polžasti dovajalnik Rieter Werke tip KBN - 6.0, širina traku 1200 mm, dolžina 6 m; - Polžasti dovajalnik Haendle tip BK1250/600x6; - Polžasti dovajalnik Witte-Loehmer, zgornja struktura ca. 3 m; - Velik polžasti dovajalnik Hochreuter und Baum z zgornjo strukturo 6 m, 130 m²; - Polžasti dovajalnik Haendle tip BKS 120b, 1508b; - Polžasti dovajalnik Haendle tip BKL 3.58; - Polžasti dovajalnik Haendle tip BKG 1035A; - Večvedernik Petersen tip EKBL 14/45/4, vedro 45 l; - Večvedernik z jeklenico, vedro 45 l; - Večvedernik Rieter tip LBD -G30/4; - Večvedernik Reker, vedro 45 l. Dedpfeymdf Nox Apljcg

Stanje: novo, For sale: Special lot of premium metal buckets. At least 500 units of these high-quality, thick-walled open-head drums (hobbocks) are available. They are commonly used for industrial paints. Each bucket weighs 1.7 kg and is oven-lacquered inside and out. Such 20-liter, thick steel sheet buckets cost €30 or more (with lid/closure) in retail. Product marking: 1A2/X38/S/25/D/BAM 8532-HEV-B 236F FE40 * 1A2 = Steel drum/open-head pail with removable lid * X = certified for packaging group I (highest hazardous goods class) Dcsdpfxjx Th U Aj Aplsg * 38 = maximum permitted gross mass in kg * S = for solids * 25 = year of manufacture (presumably 2025) * D/BAM 8532-HEV-B = German BAM approval, manufacturer Hemeyer * 236F / FE40 = internal manufacturer details (e.g. batch, material grade) In the BAM database, code HEV-B is assigned to: Hemeyer Verpackungen GmbH, Werk Bitterfeld, Farbenstraße 5, 06803 Bitterfeld-Wolfen (Germany). ([app.tes.bam.de][1]) This 1A2 open-head drum is a UN-approved steel container (drum/open-head pail) produced by Hemeyer Verpackungen GmbH, Werk Bitterfeld. It is suitable for use as a stylish decorative item, waste bin, umbrella stand, flower pot, and much more; of course, it can also be used for its intended technical application with lid and clamping ring. The price is per unit; sale without lid and clamping ring. Collection location: 28755 Bremen Collection only! _____ Our terms and conditions (AGB) apply. The seller is not liable for typing or data transmission errors. Information and photos were provided by the owner and released for publication. The appearance of the items corresponds to their age and the photos shown. Technical condition and wear correspond to the age of the items. Used machines are sold exclusively to tradespeople and without warranty.

Stanje: zelo dobro (rabljeno), PACK’R polnilni stroj v skoraj novem stanju. Uporabljal se je za polnjenje majoneze in različnih omak v sledeče embalaže: 12 x 10 kg vedra na minuto, 18 x 5 kg vedra na minuto, 18 x 2,5 kg vedra na minuto, 25 x 5-litrske kanistre na minuto, 25 x 2,27 kg kanistre na minuto, 18 x 1-litrske stisljive plastenke za burgerje na minuto. Kupljen nov leta 2017, trenutna cena je približno 450.000 funtov. Dcjdpspgq I Dofx Aplog

Stanje: novo, Leto izdelave: 2024, Pusch-Schaufel für den Untertagebau ist ein spezieller Anbau für Bergbaumaschinen wie LHD-Fahrzeuge (Load-Haul-Dump) oder Radlader. In untertägigen Anwendungen ermöglicht sie das Entladen von Material auf engstem Raum. Dodpfx Ajt Damijplecg Die Eigenschaften der abgebildeten Schaufel: Maschinenmodell: Sandvik LH515 Fassungsvermögen: 4,6 m³ Für detaillierte Informationen und Anfragen kontaktieren Sie uns bitte.

Leto izdelave: 2022, stanje: novo, Width: 185 cm Dcodpfxen Tm Ahj Aplsg

Leto izdelave: 2022, stanje: novo, Width: 210 cm Dcedpfen Tm Sbox Apljg

Stanje: novo, Leto izdelave: 2023, CAT950 Ağır Hizmet Kovası Dcjdpfoqa Daxjx Apleg Detaylı bilgi ve fiyat teklifi için lütfen bizimle iletişime geçiniz.

Leto izdelave: 2020, stanje: novo, Intended use: Construction Dsdpfxen Tm A Ts Aplocg Suitable application: Wheel loader

Leto izdelave: 2018, stanje: dober (rabljeno), Pakirna linija, ki obsega: - Dvižni trak z letvami in regulacijo hitrosti premikanja izdelka - Tehtnica - 4 dozirna koša - PLC krmilnik za celoten sistem Dcsdpfxoinbhtj Apljg V dobrem delujočem stanju

Stanje: zelo dobro (rabljeno), - Tip: REBDC Dodswyb Tfopfx Aplecg - Napajanje: Električno - 5 vrtečih rok - Napetost: 220 V - Moč: 11 kW - Serijska številka: FEG03170007 - Konstrukcija: Nerjaveče jeklo s kaljenimi steklenimi ploščami - Elektronski nadzor: Na levi strani - Spodnji del: Grelnik vitrine za ohranjanje toplote hrane

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PT 320, Stroj za redčenje sveder točk. 3000 vrt/min, premer brusilnega koluta 8". Napajanje 380V / 50Hz. Dcedpfxsx Trqnj Apleg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 32 kg, vhodna napetost: 230 V, Automatic internal lubrication – coolant is supplied directly to the annular cutter, increasing tool life and work quality. INFINITELY variable speed control – allows optimal adjustment of cutting speed to the processed material type. Morse Taper MK4 spindle – enables mounting of various tooling such as twist drills, countersinks, reamers, tapping chucks, or hole-saws. Powerful high-torque motor with soft start and overload protection ensures reliable operation. Dedpeyt I Uuefx Aplocg Robust electromagnet securely holds the machine in place during operation. Ergonomic control panel enables quick and intuitive set-up of working parameters. Solid machine construction enhances stability and minimizes vibrations during machining. Wide range of applications – ideal for industrial, workshop, and on-site service use. Technical specifications: Drilling diameter (annular cutter): 100 mm Drilling depth (annular cutter): 100 mm Drilling diameter (twist drill): 38 mm Arbor vertical travel: 275 mm Max tapping capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed range / gear settings / stepless: 1. 50-110 / 2. 20-200 / 3. 200-500 / 4. 320-800 Spindle taper: MK4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. base plate: 165 mm Magnetic adhesion force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2580 W Voltage: 230 V Dimensions (width): 330 mm Dimensions (depth): 430 mm Dimensions (height): 830 mm Weight approx.: 31.5 kg

Stanje: novo, Leto izdelave: 2026, The 100 mm IW100 Drill Press Vice is a precise, heavy-duty vise designed for use on drill presses and milling machines, engineered to provide stable clamping of workpieces during drilling, light milling, and general workshop operations. Its cast steel construction ensures high rigidity, while the ergonomic base with four mounting holes allows quick and repeatable positioning on machine tables. Key Features of the IW100 Drill Press Vice: - Enhanced rigidity thanks to a monolithic cast steel body. - Precision-guided jaws ensure stable holding of workpieces during machining. - 100 mm wide jaws accommodate a variety of component sizes. - Maximum jaw opening of 105 mm increases application flexibility. - Multi-point mounting – the base with four longitudinal T-slots provides secure and fast setup on the worktable. - Wear-resistant, even under intensive use conditions. Design and Manufacturing Technology: Dedpfx Apeycqfzjlscg The IW100 series drill press vices utilize a robust cast steel body, directly contributing to stability and resistance to vibrations generated during drilling and light milling. The jaws move linearly, providing parallelism and repeatability of positioning. The base features grooved mounting surfaces and four longitudinal holes, enabling precise alignment on column drill presses, conventional milling machines, and workshop benches. Precision and Work Efficiency: The construction of the IW100 mill and drill vice minimizes backlash and unwanted deformation, ensuring accurate tool movement and high dimensional accuracy. The stable clamping significantly reduces setup time, supports machining repeatability, and minimizes the risk of errors due to improper component positioning. Applications: The 100 mm drill press vice is ideal for use in: - Mechanical and fabrication workshops - Maintenance departments - Toolrooms - Drilling, countersinking, tapping, and light milling operations This versatile drill press and milling vice is dedicated to users who value stability, accuracy, and long-term durability. Standard Equipment: - Cast steel vice body - Set of clamping jaws - Base with four longitudinal mounting holes - Lead screw with handle Technical Specifications – IW100 Drill Press Vice Jaw width: 100 mm Jaw height: 20 mm Maximum opening: 105 mm Mounting hole spacing: 133 mm Mounting slot width: 13 mm Body material: cast steel Base: grooved, 4 longitudinal mounting holes

Stanje: novo, Leto izdelave: 2026, The 125 mm IW125 Drill Press Vice is a precise and robust vice engineered for use on drill presses and milling machines, designed for secure clamping of workpieces in demanding machining processes. The cast steel construction ensures high rigidity, while the wide jaws and large opening allow flexible handling of components with various dimensions. Thanks to its grooved base with four longitudinal mounting slots, the vice guarantees quick installation and reliable positioning on the machine table. Key features of the IW125 drill press vice: - Wide 125 mm jaws provide stable clamping of larger workpieces. - Maximum 125 mm jaw opening for working with a broad range of components. - Cast steel body ensures high resistance to bending, vibrations, and dynamic loads. - Precision jaw guidance minimizes the risk of workpiece movement during machining. - Grooved base with four longitudinal mounting holes for quick and repeatable fastening to the machine table. - High wear resistance in intensive industrial shop environments. Design and manufacturing technology: The IW125 drill press vice is manufactured from high-grade cast steel, offering excellent strength characteristics and resistance to deformation under load. The vice body has been optimized to provide optimal rigidity during drilling and light milling operations. The jaws run on ground surfaces, ensuring parallel alignment and repeatable clamping. A high-durability lead screw guarantees smooth clamping mechanism operation, minimizing axial play and allowing precise adjustment of clamping force. Precision and work efficiency: The vice's manufacturing accuracy directly translates into machining process stability. The rigid design minimizes vibrations, resulting in improved surface quality, reduced dimensional errors, and extended cutting tool life. Thanks to its large opening and parallel jaw movement, the IW125 vice allows for quick workstation setup and reduces the need for additional fixtures. In practice, this means increased work efficiency and greater repeatability of operations. Applications: IW series drill press vices are designed for professional workshop use. The IW125 model is ideal for: - metalworking and mechanical workshops, - high-cost single-piece and series machining processes, - toolmaking and prototyping shops, - operations such as drilling, tapping, countersinking, and light milling. This is a versatile drill press and milling vice, engineered for users who demand long-term reliability. Standard equipment: - Cast steel vice body - Hardened jaws - Lead screw with handle - Grooved base with four longitudinal mounting slots Technical specifications — 125 mm Drill Press Vice IW125 Jaw width: 125 mm Jaw height: 24 mm Dedjycqd Dspfx Aplscg Maximum opening: 125 mm Mounting hole spacing: 155 mm Mounting slot width: 13 mm Body material: cast steel Base: grooved, 4 longitudinal mounting slots

Stanje: novo, Device: Excavator arm Dodpopa Rr Tefx Aplscg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.800 kg, Leto izdelave: 2024, obratovalni tlak: 400 letvica, številka stroja/vozila: S10 00164, Škarje so bile uporabljene samo za en projekt! TEHNIČNE PODROBNOSTI Delovni tlak: 400 bar Pretok olja v cilindru: 200 L/min Tlak rotacije: 110 bar Pretok olja pri rotaciji: 20 L/min Dcedpfxoy Ia Iwj Aplog PODATKI O STROJU Teža: 1.800 kg Kompatibilni bagri: teža roke min. 10 t, maks. 20 t