Arburg 420 nakup rabljenega (317)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, vpenjalna sila: 1.600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced controls for both injection units and supports multi-component processing. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine Arburg Allrounder 520 S 1600-290 / 290, which we are offering for sale. Please contact us for further details. • Injection Units and Plasticising • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Programmable and controlled nozzle contact force • aXw control ScrewPilot • 2nd injection unit: • 2nd injection aggregate 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Programmable and controlled nozzle contact force • aXw control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multicomponent processing; separation plane device on short skids for the 2nd • Injection with tool closed ("flying injection") • Drive, Hydraulics, and Cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l capacity (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; enhanced cooling performance • Controlled machine cooling circuits • Clamping System, Ejector, and Core Pulls • Clamping platen set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1, simultaneous movement (P/Q controlled, programmable) • Core pull 2, simultaneous movement (P/Q controlled, programmable) • Core pull 3, simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 including pressure reducer • Electrical core pull control 1 (requires VE 436/00) • Pneumatic/Hydraulic tool connections • Electrical connection pneumatic NVD 1 (in the tool) • Electrical connection pneumatic NVD 2 (in the tool) • Electrical and hydraulic connection NVD 3 (in the tool) • Electrical and hydraulic connection NVD 4 (in the tool) • Blow-off device 1 with pressure reducer; connection for blow-off device 2 • Cooling water and tool circuit • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to the fixed platen; 3 cooling water circuits to the moving platen • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits Hnsdpsyxdwdofx Abxsn • Control and Electrics • Selogica direct control; technology level • Circuit protection for heating circuits (1-6 with 16 A) • 15 electric heating circuits for tool heating • Boost function for heating circuits (hot runner) • Upper protective guard open, raised to safety distance • Fault display with flashing indicator • Operator authorization via chip card (EUROMAP 65) • Interfaces and Connectivity • Interface for conveyor belt (machine base) • Prepared for 6-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine Manufacturer: ARBURG Model: 720A3200-800/70 Hedpfx Abov S E Dgjxonn Year of manufacture: 2017 Clamping force: 320 tonnes Tie bar distance: 720 x 720 mm Min./max. installation height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Moulded part weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Moulded part weight in PS: 31 g Control system: Selogica Request technical specifications.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 t Opening stroke: 500 mm Tie bar spacing (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight opening: 750 mm Injection Unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight (PS): 141 g Injection pressure: 2,500 bar Dimensions & Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Hnodpfx Asxvy Rlsbxon Machine weight: 4,850 kg Additional Information & Extras Core pull: 1 unit Additional Information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-series, distinguished by optimized hydraulic performance, stable process control, and high reliability. The machine features a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as for applications with high quality requirements. Typical advantages of this series include: * Robust and durable design * High process stability and repeat accuracy * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition additionally stands out due to its optimized performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is often used in sectors such as automotive supply, technical plastic parts, and series production.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Zapiralna sila: 200 t Premer vijaka: 50 mm Teža izstrela: 359 g Razdalja med vodili V: 570 mm Razdalja med vodili H: 570 mm Prostornina izstrela: 392 cm3 Vbrizgalni tlak: 2000 bar Euromap 67 Hjdjyktgqopfx Abxonn 1x izmetna enota Tip: Horizontalni Pogon: Hidravlični

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 7.500 h, We are selling our Multilift V 15KG with only 7,500 operating hours. The unit can be tested; the original purchase price was €59,000! Technical Specifications: Z-Axis (transverse to machine longitudinal axis) Travel: 1,600 mm Maximum speed: 3.0 m/s X-Axis (parallel to machine longitudinal axis) Travel: 900 mm Maximum speed: 2.0 m/s Y-Axis (vertical axis) Travel: 1,000 mm C-Axis (for gripper rotation) - Swivel range 0° / 90°, both end positions monitored and manually adjustable - Pneumatic drive, including valve control - Maximum torque at 6 bar: 28 Nm - Weight: 2.6 kg First vacuum system (Venturi principle) with air-saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, programmable vacuum, integrated condition monitoring for early detection of leakages and wear, tubing routed close to gripper; customer connection via push-in fitting for hose size OD 6 mm / ID 4 mm Second vacuum system (Venturi principle) with air-saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, programmable vacuum, integrated condition monitoring for early detection of leakages and wear, tubing routed close to gripper; customer connection via push-in fitting for hose size OD 6 mm / ID 4 mm Third vacuum system (Venturi principle) with air-saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, programmable vacuum, integrated condition monitoring for early detection of leakages and wear, tubing routed close to gripper Fourth vacuum system (Venturi principle) with air-saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, programmable vacuum, integrated condition monitoring for early detection of leakages and wear, tubing routed close to gripper; customer connection via push-in fitting for hose size OD 6 mm / ID 4 mm Hnodpfx Absy Emm Uexsn Tenth pneumatic valve 5/3 with closed center position for gripper functions, tubing routed to gripper flange with quick-connect couplings DN 2.7 for hose size OD 6 mm / ID 4 mm; customer hose connection 8 freely programmable inputs for connecting 8 gripper side sensors, wired to gripper flange with 25-pin connector; this allows monitoring of 8 sensors; a mating connector for the gripper connection is included in delivery Second interface for connecting 8 additional sensors, via 25-pin connector at the gripper flange, including mating connector for gripper connection Third interface for connecting 8 additional sensors, via 25-pin connector at the gripper flange, including mating connector for gripper connection Fourth interface for connecting 8 additional sensors, via 25-pin connector at the gripper flange, including mating connector for gripper connection Interface with 4 freely programmable inputs and outputs, not potential-free, via 42-pin socket on the MULTILIFT, for peripheral devices Additional interface with 16 freely programmable inputs and outputs (24V DC), not potential-free, wired to a 72-pin socket on the MULTILIFT; push-in fitting for hose size OD 6 mm / ID 4 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Clamping force: 50 tons Plate size: 455 x 455 mm Hnsdpfx Aowmqx Rjbxjn Tie bar spacing: 320 x 320 mm Maximum daylight opening: 575 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Hjdpfxevl Skgj Abxonn Razdalja med stebri: 270x270 mm Največja odprtina: 275 mm Višina orodja: 200 mm Velikost orodne plošče: 400 x 400 mm Premer polža: 18 mm Volumen vbrizga: 20 cm3 Masa brizga: 17 g Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, vpenjalna sila: 2.000 kN, premer vijaka: 45 mm, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 240 g, minimalna višina orodja: 250 mm, Arburg 520C-2000-675 (154) without hopper Hnjdsvtzmtepfx Abxjn General Information Item number: 154 Availability: In stock Year of manufacture: 1998 Brand: Arburg Technical Data Injection weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Injection pressure: 2500 bar Tie bar distance: 520 x 520 mm Platen size: 715 x 715 mm Minimum mould height: 250 mm Control system: Selogica Language: German Power: 44.9 kW Operating hours: 126,766 h Weight: 6,630 kg Dimensions: 5.6 x 1.7 m Euromap interface: Yes Air valve: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, vpenjalna sila: 1.300 kN, premer vijaka: 35 mm, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 127 g, Arburg 470S-1300-350 (170) Hybrid with Electric Screw Drive, Without Hopper General Information Item number: 170 Availability: In stock Year of manufacture: 2005 Brand: Arburg Technical Data Shot weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Injection pressure: 2500 bar Tie bar spacing: 470 x 470 mm Platen dimensions: 650 x 650 mm Minimum mould height: 275 mm Control system: Selogica Language: German Hnedpfx Absvt Tn Nexjn Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Hopper: No Core pull: Yes Euromap interface: Yes Air valve: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, obratovalne ure: 95.616 h, vpenjalna sila: 1.300 kN, premer vijaka: 45 mm, tlak vbrizgavanja: 1.670 letvica, injekcijska masa: 194 g, Arburg 520C-1300-350 (163) with bimetallic plasticizing unit General Information Article number: 163 Availability: In stock Year of manufacture: 1999 Brand: Arburg Technical Data Shot weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Injection pressure: 1670 bar Tie bar distance: 520x520 mm Platen size: 715x715 mm Minimum mold height: 250 mm Control system: Selogica Language: German Power: 32.2 kW Operating hours: 95,616 h Hodpovt Rvdefx Abxjnn Weight: 6,380 kg Dimensions: 5.1x1.9 m Hopper: No Core pull: Yes Euromap interface: Yes

Stanje: dober (rabljeno), Leto izdelave: 2002, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 570 mm, delovna prostornina: 427 cm³, tlak vbrizgavanja: 2.080 letvica, minimalna višina orodja: 300 mm, Tehnični podatki – Arburg 570C 2000-675 Splošne informacije: Leto izdelave: 2002 Krmiljenje: Selogica Vbrizgalna enota: Tip: … / 675 Premer polža: 55 mm Specifičen pritisk vbrizga: 2080 bar Vbrizgalni volumen: 427 cm³ Sistem zapiranja: Hodpfsyxnr Sjx Abxonn Tip: 2000 / … Sila zapiranja: 200 t Dimenzije plošč: 950 × 950 mm Prostor med stebri: 570 × 570 mm Višina orodja: 300 mm Hod odpiranja: 650 mm Maksimalna razdalja med ploščama: 950 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 22.626 h, vpenjalna sila: 100 kN, premer vijaka: 25 mm, Machine hydraulique de moulage par injection datant de 2014. Cette Arburg 470 H 1000-170 dispose d'une force de fermeture de 100 tonnes et d'un diamètre de vis de 15/25 mm. Elle est équipée d'une unité de sélection et d'une conception à plaque unique avec un espacement des colonnes de 470 x 470 mm. Si vous recherchez une machine de moulage par injection de haute qualité, la Arburg 470 H 1000-170 que nous proposons à la vente mérite votre attention. Contactez-nous pour plus d’informations. • Unité de sélection : oui • Plaque unique : oui • Espacement des colonnes : 470 x 470 mm • Heures de fonctionnement : 22 626 h • Électrique : • Tension de service : 400 V, 3~, 50 Hz • Tensions de commande : 230 V, 50 Hz ; 24 V~ Hedpfx Asytqlcsbxsnn • Courant nominal moteur/chauffage : 80 / 58 A • Courant nominal total : 138 A • Puissance totale installée : 75 kW • Remarque sur l’état : petit problème de servomoteur Équipement supplémentaire • Système de manipulation Geiger (en option)

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, razmak između stupova: 470 mm, For sale is an injection moulding machine from the brand Arburg, model 470 C 1600-800. The pump and a control card have been removed from the machine, so it is being sold as defective. Other than that, the machine is in very good condition. Technical data: Pump hours: 61,400 Clamping force: 1,600 kN Clear tie bar spacing: 470 x 470 mm Ejector stroke: 225 mm Screw diameter: 50 mm Shot volume: 398 cm³ Dimensions: 4,335 x 1,635 x 1,950 mm Weight: 6,950 kg Hnodpfx Abov Edrijxjn The machine is offered without peripherals. Transport and loading can be organised Europe-wide at additional cost upon request. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell your equipment? For more information or ways to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 55.806 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, skupna dolžina: 4.700 mm, skupna širina: 1.700 mm, skupna višina: 2.000 mm, skupna masa: 4.850 kg, For sale is an injection molding machine from Arburg, model 470 C 1500-400. The offer includes an Arburg handling unit, type Multi Select with X/Y/Z axes 600/600/1400 mm. Hjdpfx Abew E Itijxenn The machine is in excellent condition and ready for immediate use. Technical data: - Year of manufacture: 2011 - Clamping force: 1500 kN - Tie bar distance: 470 x 470 mm - Mounting platen: 650 x 650 mm - Operating hours (pump): 55,806 h - Injection unit: Ø 45 / SP 400 - Shot volume: approx. 254 cm³ - Shot weight: approx. 232 g - Injection pressure: up to 1580 bar - Dimensions: approx. 4700 x 1700 x 2000 mm - Weight: 4850 kg Transport and loading can be organized Europe-wide upon request, at an additional cost. All prices plus VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 121.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 20 mm, For sale is an Arburg injection molding machine, model 320 C 500-100. The machine is in good condition and fully operational after installation. Technical data: Year of manufacture: 2002 Pump hours: 121,000 h Clamping force: 500 kN Ejector force: 35 kN Distance between mounting plates: 550 mm Clear tie bar spacing: 320x320 mm Mounting plate dimensions: 446x446 mm Screw diameter: 20 mm Calculated shot volume: 31 cm³ Transport and loading can be organized Europe-wide for an additional fee upon request. All prices are plus VAT. Hnedpfxowqnhwe Abxon Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 90.627 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 180 kN, premer vijaka: 18 mm, For sale is an injection moulding machine from Arburg, model 170U 180-70. The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2004 Operating hours: 90,627 h Cylinder diameter: 18 mm Clamping force: 180 kN Needle shut-off: Pneumatic Internal pressure sensor Hodpfx Abou Hqg Tsxonn Transport and loading can be organised Europe-wide upon request and for an additional charge. Prices are subject to VAT. Inspection by appointment possible. Feel free to contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Hnedpfsxirqqox Abxen Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Za več informacij ali kontakt obiščite našo spletno stran,

Stanje: dober (rabljeno), Leto izdelave: 1998, obratovalne ure: 2.250 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 174667, vpenjalna sila: 500 kN, skupna masa: 21.300 kg, For sale is an Arburg 320 S 500-150 injection moulding machine. The item is in good condition. Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500 - 150 Machine Number (Serial Number): 174667 Year of Manufacture: 1998 Clamping Force: 500 kN Voltage: 400 V 3∼ Frequency: 50 Hz Operating Hours: 130,746 h Current (unknown): 0.3 A Connected Load/Power (unknown): 1×15.00 kW Hnedpfx Abexvxrzoxon Total Weight (unknown): 21.3 t Transport and loading can be organised Europe-wide upon request and at an additional charge. Prices exclude VAT. Viewing by appointment is possible. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Machinery buying & selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 71.732 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 180 kN, premer vijaka: 25 mm, For sale is an injection molding machine from the brand Arburg, model 170 U 180-70. The machine is fully operational and ready for immediate use. Technical Data: Year of manufacture: 2003 Operating hours: 71,732 h Needle shut-off: Pneumatic Screw diameter: Ø 25 mm Clamping force: 180 kN Core pull function Hodpfx Abeu Hqg Hsxonn Internal pressure sensor Transport and loading can be organized across Europe upon request, for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 78.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 250 kN, premer vijaka: 18 mm, For sale is an injection molding machine from Arburg, model 270S 250-60. The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2001 Operating hours: 78,000 h Screw diameter: 18 mm Hodpeu Hqhqjfx Abxjnn Clamping force: 250 kN Needle shut-off: Pneumatic Core puller: 1* Hydraulic Internal pressure sensor Transport and loading can be organized throughout Europe upon request and at an additional cost. Prices are plus VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or are you planning to sell your equipment? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 63.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 400 kN, premer vijaka: 25 mm, For sale is an injection molding machine from Arburg, model 270S 400-60. Hnjdpfxou Hqh Rs Abxsn The machine is fully functional and ready for immediate use. Technical data: - Year of manufacture: 2005 - Operating hours: 63,000 h - Cylinder: Ø 25 - Clamping force: 400 kN - Core pull: 1x hydraulic - Internal pressure transducer Transport and loading can be organized throughout Europe for an additional charge upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINERY AND MUCH MORE. Do you need a high-quality yet affordable metal processing machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 350 kN, premer vijaka: 25 mm, For sale is an injection moulding machine from Arburg, model 320S 350-60. The machine is fully functional and ready for immediate use. Technical data: - Year of manufacture: 2005 - Operating hours: 70,000 - Screw diameter: 25 mm - Clamping force: 350 kN - Needle shut-off: Pneumatic - Core pull: 1*Hydraulic - Cavity pressure sensor - Selector valve Transport and loading can be organised Europe-wide for an additional charge upon request. Prices are subject to VAT. Viewing by appointment is possible. Please contact us, our team will be pleased to assist you. Hjdpfx Asu Hqiusbxsnn Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, vpenjalna sila: 500 kN, premer vijaka: 25 mm, odmični hod: 350 mm, For sale is an Arburg injection moulding machine, type 320 S 500-150. The company from which this machine originates places great emphasis on maintenance. The machine's production order has been completed, and as no follow-up order was assigned, the machine was removed from production. The pump has a slight pressure loss but remains operational. Technical data: Year of manufacture: 2004 Clamping force: 500 kN Screw diameter: 25 mm Hjdjkwcydopfx Abxonn Injection force: 35 kN Ejector force: 120 kN Opening stroke: 350 mm Distance between tie bars: 575 mm Min. mould height: 225 mm All prices plus VAT. Viewing possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 144.381 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, For sale is an injection moulding machine from Arburg, model 520 C 2000-675. Technical data: Hnsdpfxju Uuakj Abxen Year of manufacture: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW Transport and loading can be organised Europe-wide for an additional fee if required. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 55.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 350 kN, premer vijaka: 18 mm, For sale is an injection moulding machine from the brand Arburg, model 320S 350-60, complete with original Arburg handling system. The machine is fully operational and ready for immediate use. Technical data: Year of manufacture: 2004 Operating hours: 55,000 h Screw diameter: 18 mm Clamping force: 350 kN Core pull: 1x hydraulic Needle shut-off: pneumatic Diverter valve Handling: Arburg Multilift H - Side extraction Incl. discharge conveyor belt Transport and loading can be organized Europe-wide for an additional charge upon request. Prices are plus VAT. Inspection available by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website. Hsdpju Hqinsfx Abxsnn