Alzstar 40 nakup rabljenega (58.144)

Stanje: zelo dobro (rabljeno), Digitalni zunanji mikrometer priznane znamke Mahr Micromar 40 EWR. Merilno območje 25–50 mm z natančnostjo 0,001 mm. LCD zaslon s funkcijami ZERO, ABS, REL in TOL. Zaščita IP65 – odporen na prah in škropljenje z vodo. V kompletu je vključena merilna etalona, ključ, dokumentacija in originalni kovček. Tehnično in vizualno stanje zelo dobro. Pedpfsxl Hqdox Agpjrd

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7541 Technical specifications: Podpfx Agevwczyeperd - Max main saw blade diameter (without scoring unit): 400 mm - Max main saw blade diameter (with scoring unit): 350 mm - Saw blade bore diameter: 30 mm - Max cutting height with 400 mm blade: 90° – 120 mm, 45° – 85 mm - Max cutting height with 350 mm blade: 90° – 95 mm, 45° – 67 mm - Main blade adjustable vertically and for bevel cuts - Saw blade guard included - Equipped with side sliding table - Cutting length on sliding table: 1700 mm - Cutting width on sliding table: 1400 mm - Cutting width at rip fence: 1350 mm - Main motor: 6 kW - Table dimensions: 1190 x 990 mm - With table extension: 1880 mm - With table elongation: 1890 mm - With scoring unit - Max scoring blade diameter: 120 mm - Scoring spindle diameter: 20 mm - Scoring motor: 0.75 kW - 3 spindle rotation speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80/120 mm - Dimensions (LxWxH): 3050 x 2200 x 1600 mm - Weight: 800 kg ADVANTAGES – Manufactured in Poland – DTR technical documentation included – Saw blade guard – With scoring unit – With table extension and enlargement – Used saw, very good condition Net price: PLN 15,900 Net price: EUR 3,780 (based on an exchange rate of 4.2 EUR) (Prices subject to change with significant exchange rate fluctuations.)

Stanje: zelo dobro (rabljeno), Collet chuck holder Collet chuck SK 40 DIN 69871 Drawbar thread M 16 Prjdpfxelwqc Eo Agpsd Collet type OZ-467 E Length 140 mm 10 pieces with set: 150 euros Individual sale: 15 euros each

Stanje: zelo dobro (rabljeno), 40 running meters Stow pallet racking Used equipment, very good condition, see pictures Height: 4 m Depth: 100 cm Beam length: 2.70 m Load capacity per level: 3,000 kg Frames: blue Beams: orange Negotiable price: €2,570 net ex stock Podpfx Ageiwlpfjpord Offer includes: + 14 pre-assembled frames, bay load 12 t, depth 100 cm, height 4 m + 52 beams, length 2.7 m, 3,000 kg load per level + 108 locking pins + 56 concrete anchors + Load capacity signage Goods in stock. Transport and installation available on request. Inspection possible by appointment at any time. Further information available on request. Over 5,000 running meters of pallet racking from various manufacturers in stock at all times. (Subject to modifications and errors in the technical data, specifications and prices; prior sale reserved! Please refer to our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly seeking or offering a wide range of items from various sectors: - Broom-clean company clearances - Business liquidations - Fast – flexible – reliable! We also clear or dispose for insolvency administrators. Please contact us with a few key details – we will respond immediately. To visit our page, please click on our logo!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Na prodaj so delujoči in zelo dobro ohranjeni dvogorivni gorilniki olje/plin znamke Weishaupt RGL40/1-B (2550 kW), vključno s plinsko armaturo Dungs DN 65, letnik 2001, s krmilno omaro. Weishaupt RGL40/1-B (2550 kW) Prjdpfx Ajwgk Raegped - Moč: 450-2550 kW - 45-215 kg/h - Izvedba: ZM - Priključni tlak: 15-500 mbar

Stanje: dober (rabljeno), Heidelberg Cylinder KSB 40×57, avtomatski izsekovalni stroj Zelo redek model na trgu. Stroj je pripravljen za takojšnje delo, v zelo dobrem tehničnem stanju. Po opravljenem pregledu. Primeren za izsekavanje. Podpewmy Risfx Agperd Centralno mazanje. Format: 40×57 cm Teža: 3500 kg Napajanje: 380 V Vključuje dva predala z dodatnimi elementi, okvir, pločevino za valj, polnila in tipografske zapore.

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni stružno-dokončni nosilec z vpenjalom SK40, idealen za planiranje, dodelavo in grobo obdelavo čelnih ter ravnih površin. Konstrukcija iz kakovostnega orodnega jekla zagotavlja stabilnost, togost in visoko natančnost vpenjanja. 📌 Tehnični podatki: . Tip: stružno-dokončni nosilec z izmenljivo rezalno ploščico . Vpenjanje: SK40 DIN 69871 B . Dimenzije: SK40 × 40 × 40 . Premer glave: Ø40 mm . Skupna dolžina: približno 60 mm . Stanje: rabljen, tehnično zelo dober – popolnoma delujoč ✅ Prednosti: . Visoka natančnost obdelave in togost vpenjanja . Možnost dela z izmenljivimi rezalnimi ploščicami . Primeren za planiranje, dodelavo in grobo obdelavo . Kompatibilen s frezalnimi stroji in obdelovalnimi centri s pritrditvijo SK40 Podpfxoxizb Ej Agpjrd

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7620 TEHNIČNI PODATKI - širina valja: 410 mm - dolžina miz: 2220 mm - litoželezne mize - obe mizi nastavljivi - originalno litoželezno vodilo - motor približno 3 kW - dimenzije d/š/v: 2220x800x1140 mm - teža: 504 kg PREDNOSTI – nemška proizvodnja Prodswbz Huopfx Agped – rabljeni skobljični stroj – zelo dobro stanje Neto cena: 6900 PLN Neto cena: 1640 EUR po tečaju 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih tečaja)

Stanje: kot nova (razstavni stroj), Collet chuck SK 40, DIN 69871/OZ32 Prodpfx Aolrt S Nsgped Collet type OZ32 467 E total length 190 mm the items are unused in opened original packaging price per piece 12 pieces available weight per piece 2 kg

Stanje: skoraj kot novo (rabljeno), 40 running meters Nedcon pallet racking New, see pictures! A top-quality racking system from the well-known manufacturer NEDCON – a subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 5.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity per level: 3,050 kg Negotiable price: €6,290,-- net ex stock The offer includes: + 15 pcs. pre-assembled frames, depth 110 cm, height 5.5 m + 84 pcs. beams, length 2.7 m, 3,050 kg load capacity per level + 168 pcs. locking pins + 30 pcs. concrete anchors Load capacity signs, documents, etc. are included as a matter of course. Additional accessories can be found in the accessories catalogue. Frames: blue, RAL 5019, bracing galvanized. Heights from 2 m to 7 m in stock. Bay load: 12 tons, higher bay loads available on request. Beams: orange, RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly available on request. Other configurations available on request. Over 2,000 meters available. Pedpfofkgpwsx Agperd Inspection possible anytime by appointment. Further information available upon request. Constantly more than 5,000 running meters of pallet racking from various manufacturers in stock. (Modifications and errors in technical data, information, and prices as well as prior sale reserved! See our Terms and Conditions, all prices excl. VAT ex stock.) Purchase / Sale We are constantly searching for and offering a wide range of items from various sectors • Swept-clean company liquidations • Business closures • Fast – flexible – efficient! We also clear out or dispose of for insolvency administrators. Send us a brief message and we will get back to you promptly. To access our homepage, please click on our logo!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 13.209 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, kapaciteta rezervoarja za olje: 400 l, lastna masa: 8.500 kg, leto zadnje generalne obnove: 2025, volumenski pretok: 108 m³/h, Technical Data – Baler: Manufacturer (according to nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (status: March) Number of bales pressed: 23,379 pcs Pressing force: 50 t Specific press force: 650 kN/m² Feed chute dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates (by bulk density): - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour - 100 kg/m³: approx. 7.2 t/hour Bale weights (with bale length 1.2 m): up to 500 kg, material-dependent Hydraulic oil tank capacity: 400 L PLC: Siemens S7-200 Effective transport dimensions (excluding baler): 6780 x 1800 x 2100 mm (L x W x H) Transport weight (baler): 8.5 t Condition of the Baler: The baler was in operational use within a production environment, used exclusively for compacting cardboard, and serviced regularly. With only 13,209 operating hours, the machine has low mileage for its type. The baler has been partially overhauled and subsequently tested in our workshop. The following overhaul work was carried out: Predpfjw U Dt Njx Agpod - Machine cleaned - Bale retaining claws freed and lubricated - Light barrier replaced - Twisting unit completely dismantled, all bearings and plastic sliding blocks replaced, lubricated, chain tension adjusted - Knife and counter-knife removed, sharpened, reinstalled - Knife gap newly adjusted - General maintenance and lubrication performed Scope of delivery: - 1 baler incl. wire reel boxes, without wire - 1 set of machine documentation Remarks: The complete documentation (operating instructions, CE declaration, electrical/hydraulic schematic) is available. Viewing possible by appointment. We accept no liability for the technical information or for possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Meyn Deboner Typ: D40 Rodzaj odkostniarki: uda i podudzia drobiowe Wydajność: do 2400 sztuk na godzinę w zależności od zastosowania Wymiary: 1500x1300x2000 mm Waga: 500 kg Prsdpoqwguyefx Agpsd Rok produkcji: 2012 Zachęcamy do osobistego obejrzenia urządzenia na miejscu, gdzie mogą Państwo ocenić maszynę, sprawdzić jej wydajność oraz potwierdzić wysoką jakość. Film poglądowy

Stanje: zelo dobro (rabljeno), Na prodaj je kakovostna hidravlična stiskalnica priznanega proizvajalca Vogel & Co Pressenfabrik Berlin-Borsigwalde. Model: 40×250 Številka stroja: 1715 Maksimalni pritisk: 40 ton Kapaciteta olja: 150 litrov Psdpfx Agow Rc Hmepord Stroj je v dobrem tehničnem stanju, popoln, s kontrolno ploščo. Masivna, stabilna konstrukcija – idealna za industrijsko uporabo pri stiskanju, oblikovanju ali montaži. Električni priklop, hidravlični pogon. Stroj stoji na paleti – omogočen enostaven naklad. Stanje: rabljen, delujoč, z običajnimi sledmi uporabe.

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7587 Tehnični podatki: - širina valja: 410 mm Pjdpfx Aev Nhgxegpsrd - število nožev: 3 kos - zavora - dolžina miz: 2540 mm - železne mize - obe mizi nastavljivi - originalno železno vodilo nastavljivo po kotu - motor: 3 kW - dimenzije (d/š/v): 2540x1000x1050 mm - teža: 730 kg Prednosti: – Poljska proizvodnja – 3-nožni valj – Rabljeni skobeljni stroj – Zelo dobro stanje Neto cena: 7.900 PLN Neto cena: 1.880 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih nihanj tečaja se lahko cena spremeni)

Stanje: zelo dobro (rabljeno), Weishaupt RGMS 40 dual-fuel burner, gas + heavy oil. 2600 W Pedpfxemnqbts Agpord

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Vijačni kompresor GRASSAIR RLR 40 8B Vijačni modul ATLAS COPCO Tehnični podatki: Zmogljivost: 5,30 m³/min (5300 L/min); Motor z močjo 30 kW; Prjdpfxow Nipre Agpsd Maks. tlak: 8 bar; Število delovnih ur: 12.847 h; Leto izdelave: 2008; Kompresor je popolnoma delujoč; Neto cena: 12.200 PLN Bruto cena: 15.006 PLN Spodaj povezava do videa.

Stanje: rabljeno, Leto izdelave: 2008,

Stanje: rabljeno, -KOM 3100- A set of VDI 40 tool holders is being offered here. The lot contains a total of 12 items. Contents: - 1x VDI 40 tool holder + internal turning tool, from 50 mm diameter - 1x VDI 40 tool holder + internal turning tool, from 19 mm diameter - 1x VDI 40 tool holder + internal turning tool, from 15 mm diameter - 1x VDI 40 tool holder + internal turning tool, from 10 mm diameter - 1x VDI 40 tool holder + drill from 16 mm diameter - 1x VDI 40 tool holder + axial parting tool Psdpfowuq E Hsx Agperd - 1x VDI 40 tool holder + back turning tool, from 47 mm diameter - 1x VDI 40 tool holder + back turning tool, from 40 mm diameter - 1x VDI 40 special tool holder - 2x VDI 40 tool holders - 1x VDI 40 plug

Stanje: zelo dobro (rabljeno), For sale: SK40 tool holders, milling heads, drill chucks, and cutting tools. Condition: used, in good technical condition. Available brands: * Haimer * Wohlhaupter * Schunk * Sandvik * Iscar * Garant * Fahrion * Gewefa * WTE * Kelch * WNT * Atorn * Bahmüller * Eroglu * Holex * LLambrich * Weldon * i-tec * Zurn Germany - Drill chucks, facing heads, tool holders with coolant supply, and many other items. Podpfx Agjw Hl Sxsperd 🛠️ Some sets include milling cutters, drills, and turning tools. - Price listed per holder as shown in photos 1-2, Haimer 60€/piece.

Stanje: rabljeno, Various tool holders from Mazak, Sandvik, Mimatic, Gerardi, EWS, Nikken, and others. Turning and milling tools with VDI 40 interface. Available for sale only by pallet. Pallet 5: EUR 2,730 total - 3x driven tools VDI 40: EUR 580 each - 11x tool holders VDI 40: EUR 90 each Psdpsvry T Nefx Agpjrd Pallet 6: EUR 2,640 total - 3x driven tools VDI 40: EUR 580 each - 10x tool holders VDI 40: EUR 90 each Pallet 7: EUR 2,640 total - 3x driven tools VDI 40: EUR 580 each - 10x tool holders VDI 40: EUR 90 each Pallet 8: EUR 2,730 total - 3x driven tools VDI 40: EUR 580 each - 11x tool holders VDI 40: EUR 90 each

Stanje: rabljeno, -KOM 3099- CNC Lathe VDI 40 Toolholder Bundle Pjdpfxewuq A Ee Agpsrd Offered here is a bundle of VDI 40 toolholders consisting of 10 items. Contents: - 1x VDI 40 toolholder + internal turning tool from 50 mm diameter - 1x VDI 40 toolholder + internal turning tool from 23 mm diameter - 1x VDI 40 toolholder + internal turning tool from 16 mm diameter - 1x VDI 40 toolholder + drill bit, 38 mm diameter - 1x VDI 40 toolholder + back turning tool from 47 mm diameter - 1x VDI 40 toolholder + axial parting tool - 3x VDI 40 toolholder - 1x VDI 40 blanking plug Weight: 30 kg

Stanje: novo, Sheet thickness: 40 Bending length: 3100 Top roller diameter: 460 Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - The 4 rollers are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positioning - Hydraulic adjustment - Top and bottom rollers driven by hydraulics and gearbox - Vertical movement of the lower roller is hydraulically actuated - Mobile control panel - In compliance with CE standards Pedpfx Aged Ab Rfepord Options: - Variable rotation speed EUR 5,858 - Material feed table EUR 5,100 - Oil cooler STD - Central support EUR 18,750 - Side supports EUR 15,000 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roller support system (for special customer requirements) We have a large number of references!

Stanje: novo, Sheet thickness: 35 Bending length: 3100 Top roll diameter: 460 Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically powered top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EURO 5,325 - Material feed table EURO 3,896 - Oil cooler STD. - Central support EURO 12,058 - Side supports EURO 11,258 - Automatic material extractor - PLC control - CNC control - Automatic material loading system Predped Ab Rgofx Agpsd - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 40 mm Top roll diameter: 430 mm Technical data: - Hardened and polished rolls - Complete body made from ST-52 steel - Conical bending device - Digital readout for side rolls Podpfx Aod Ab Suegpsrd - Portable control panel - Rolls mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed: EUR 5,858 - Material feed table: on request - Oil cooler: standard - Central support: EUR 13,600 - Side supports: EUR 9,600 We have numerous references!

Stanje: novo, Sheet thickness: 40 Bending length: 2600 Top roll diameter: 430 Technical specifications: - Hardened and polished rolls - Entire frame made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll position - Hydraulic feed - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the bottom roll is hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 5,858 - Material feed table: EUR 3,400 - Oil cooler: standard - Central support: EUR 13,600 - Side supports: EUR 9,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements) We have numerous references! Psdpfx Ajd Ab Rmogperd