Alzmetall Ab 3 Es nakup rabljenega (159)

Stanje: novo, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 300 mm Chedpfx Ajxabq Ijfwed Drilling stroke: 160 mm Tapping capacity: M30 Speed range: 100 - 1600 rpm Table size: 615 x 430 mm Drill spindle Morse taper: 4, short spindle MK Column diameter: 145 mm Feed rate: 0.1-0.2-0.3-0.4 mm/rev Distance spindle / table: 147 / 688 mm Motor power: 1.8 / 2.9 kW Weight: 450 kg Machine height: 1865 mm Features: - Automatic feed with electromagnetic feed clutch - 4 feed steps (0.1-0.2-0.3-0.4 mm/rev) - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Spindle guard with electrical interlock - Digital speed display - Machined base plate - Motor 1.8 / 2.9 kW – 100 – 1600 rpm Special accessories included: - LED machine light, Pos. 12 - Tapping device, Pos. 20.0 (tapping with stop) - Coolant system “A”, Pos. 24 (base plate with integrated coolant system, complete) - Digital drilling depth display, Pos. 37.1 (5-digit LED display)

Stanje: rabljeno, High-performance drilling machine ALZMETALL Type Abomat 20 Production drilling machine Serial No. 452 Year of manufacture: 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle taper: SK 40 - M16 Throat: 280 mm Quill stroke: 500 mm Distance spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, stepless Quill feed: 20 - 224 mm/min, stepless Rapid traverse (quill): 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed 1000 rpm) Mains connection: 400 Volt, 50 Hz - Stepless spindle speed adjustment via frequency converter - Stepless quill feed via frequency converter - 2 operating modes: setup and automatic - Central lubrication Chedpfxoikrtqs Afwod - Control cabinet at the rear of the machine - Swivelling control panel - Mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement (L x W x H): 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Stanje: novo, ALZMETALL Column Drilling Machine Alzstar 23 S Manufacturer: Alzmetall Model: Alzstar 23 S Condition: NEW Drilling capacity in steel E335 (St 60): 23 mm Thread tapping: Steel E335 (St 60): M 14 Cast iron EN-GJL-200 (GG20): M 16 Short spindle MK 2 Cjdpfjy S Avlox Afwehd Spindle stroke: 100 mm Throat depth: 250 mm Column diameter: 90 mm Machine table, usable area: 370 x 300 mm T-slots, number x width x spacing: 2 x 14 x 160 mm Distance spindle-table min./max.: 140/670 mm Feed: manual Machine height without options: approx. 1770 mm Net weight: approx. 175 kg Drive: stepless Motor: 750 / 1500 rpm Power: 0.6 / 0.95 kW Spindle speed (rpm): 225-4300 Standard equipment: Mushroom-head emergency stop button (locking) Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Protection class IP 54 Power plug (pre-installed, cable length 2m) Spindle guard with electrical interlock Paint finish: DD textured paint light grey RAL 7035, anthracite RAL 7016

Stanje: rabljeno, Mounting: MK 4 Chedpfob N Ezrsx Afwsd

Leto izdelave: 2023, stanje: novo, številka stroja/vozila: PRJ065955, ALZMETALL Bench Drill Machine, Drilling capacity in steel: 12mm. Chuck mount: B16 external taper, spindle stroke: 40mm, throat depth: 200mm, column diameter: 50mm, usable table surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle–baseplate distance min./max.: 110/250mm, manual feed, machine height without options: 670mm, net weight: 64kg. Cjdpfxolub Rds Afwohd - Infinitely variable speed range: 250–5000 rpm Standard features: 5" TFT LCD display with touch function: Manual entry of desired spindle speed, actual speed display, integrated drilling depth display with touch zeroing, virtual drilling depth scale on the display, machine status and warning messages on the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m. Three separate buttons for clockwise, counterclockwise, and stop. Spindle locking via braking function, spindle guard with electric safety interlock, lockable main switch, emergency stop mushroom push-button (latching), stepless speed adjustment via potentiometer, IP54 protection rating, spindle guard with electric safety interlock. Coating: DD textured lacquer, signal white RAL 9003, PANTONE 7545c, black. Includes the following options: LED machine light, pos. 12. Delivery time: ex stock Waiblingen Beinstein

Stanje: novo, Bohrvermögen in St 60 40 mm Gewindeschneiden in ST 60 M 24 mm Gewindeschneiden in GG 20 M 30 Bohrhub 120 mm Kurzspindel MK 3 Ausladung 293 mm Säulendurchmesser 115 mm Maschinentisch - nutzbare Auflage 514 x 360 mm T-Nuten Anzahl - Breite - Abstand 2 x 14 x 224 mm Abstand Spindel-Maschinentisch min./max. 117 / 701 mm Vorschub 0,10 + 0,20 mm/U Spindeldrehzahlen 160 - 2250 UpM Gesamtleistungsbedarf 1,45 / 1,9 kW Maschinenhöhe 1840 mm Maschinengewicht ca. 285 kg ALZMETALL Säulenbohrmaschine ALZSTAR 40 SV mit Kühlmitteleinrichtung B, bestehend aus: Separatem Behälter, Pumpe mit Motorschutzschalter,kompletter Armatur. Serienmäßige Ausstattung: Chodpfx Afjgp Dyxowod - Pilzdrucktaster (verrastend) für NOT-AUS - Wendeschalter für Rechts-Linkslauf - Motorschutzschalter - Drehzahlverstellung stufenlos - Drehzahlanzeige digital - Vorschubüberlastsicherung - Schutzart IP 54 - Anschlußstecker - Spindelschutz mit elektrischer Absicherung - mit LED Maschinenleuchte

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Chedpsd Hy Elsfx Afwod Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: novo, Drilling capacity in St 60: 16 mm Thread cutting in St 60: M 12 Short spindle MK 2 Spindle speed: 100–2,000 rpm Spindle stroke: 80 mm Throat depth: 190 mm Column diameter: 65 mm Machine table – usable surface: 300 x 240 mm T-slots (Number - Width - Distance): 2 x 12 x 80 mm Distance spindle to machine table min./max.: 75/357 mm Base plate – usable surface: 300 x 240 mm T-slots (Number - Width - Distance): 2 x 12 x 80 mm Distance spindle to base plate min./max.: 437/437 mm Manual feed Table height adjustment via handwheel Machine height: 825 mm Chsdpfxeyv Nn Nj Afwod Total power requirement: 0.7 kW Weight: 93 kg Standard equipment: 5'' TFT LCD display with touch function: Manual input for target spindle speed, actual speed display, integrated drilling depth indicator with touch zero-setting, virtual drilling depth scale on display, machine status and warning messages in display, service information, selectable operating languages: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Plug pre-installed, cable length 3 m - Continuously variable speed adjustment via potentiometer - Three separate buttons for clockwise, counterclockwise, and stop (spindle brake function) - Spindle guard with electrical interlock - Emergency stop mushroom switch (latching) - Main switch, lockable - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured lacquer signal white RAL 9003, PANTONE 7545c, black Special equipment: Pos. 37.6 MAXIMUM DRILLING DEPTH DISPLAY as measurement function for current drilling depth

Stanje: novo, Drilling capacity in St 60: 14 mm Tapping capacity in St 60: M 10 Short spindle: MT 2 Spindle speed: 230-4,000 rpm Spindle stroke: 80 mm Throat depth: 190 mm Column diameter: 65 mm Machine table – usable surface: 300x240 mm T-slot quantity – width – spacing: 2 x 12 x 80 mm Distance spindle–machine table min./max.: 75/357 mm Base plate – usable surface: 300x240 mm T-slot quantity – width – spacing: 2 x 12 x 80 mm Distance spindle–base plate min./max.: 437/437 mm Feed: manual Table height adjustment: handwheel Machine height: 825 mm Total power requirement: 0.7 kW Weight: 93 kg Cjdpfx Afeyv Nqdowohd Standard equipment: 5" TFT LCD display with touch function: Manual input of spindle speed setpoint, actual speed display, integrated drilling depth indicator with touch zeroing, virtual drilling depth scale in display, machine status and warning indicators on display, service information, selectable operating language: DE/EN/FR/ES/IT/NL/RU. - Single-phase AC motor 230 Volt, 50 Hz - Pre-installed power plug, cable length 3 m - Stepless speed adjustment via potentiometer - Three separate buttons for forward – reverse – stop (spindle brake function) - Spindle guard with electric interlock - Emergency stop mushroom button (latching) - Main switch, lockable - Control voltage: 24 Volt - Protection class: IP 54 - Paint finish: DD textured paint Signal White RAL 9003, PANTONE 7545c, black Special equipment: Pos.37.6 MAXIMUM DRILLING DEPTH INDICATOR as a measuring function for the current drilling depth

Stanje: novo, Column Drilling Machine Alzmetall Alzstar 40/S Manufacturer: Alzmetall Model: Alzstar 40/S Condition: New Drilling capacity in steel E335 (St 60): 40 mm Short spindle: MK 3 Quill stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable surface: 514 x 360 mm Cjdsy S Ar Tepfx Afwehd T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle to table min./max.: 117/701 mm Feed: manual Machine height without options approx.: 1840 mm Net weight approx.: 270 kg Spindle speed (rpm): 160–2250

Stanje: novo, Drilling capacity in steel (diameter): 40.0 mm Thread cutting: M 24 Throat depth: 293 mm Drill stroke: 120 mm Morse taper: 3 short spindle MT Table size: 515 x 360 mm Speed range: 80 – 1125 rpm Feed: 0.10 + 0.20 mm/rev Column diameter: 115 mm Distance spindle / table: 117 / 701 mm Total power requirement: 1.0 / 1.6 kW Cjdpjxaar Rofx Afwehd Weight: 270 kg Machine height: 1840 mm Features: - Main switch with lockable motor protection switch - Emergency-stop mushroom pushbutton (latching) - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle guard with electrical interlock - Operating manual in German Including special equipment: - Tapping unit Pos. 20.0 (Thread cutting with stop) - Coolant system "B" Pos. 25.

Stanje: novo, Drilling capacity in steel (diameter): 23.0 mm Throat depth: 250 mm Quill stroke: 100 mm Morse taper: 2 MT Table: 370 x 300 mm Chedpfx Aexabwzsfwed Speed range: 225 – 4,300 rpm Column diameter: 90.0 mm Spindle-to-table distance: 140 / 670 mm Motor power: 0.6 / 0.95 kW Weight: 175 kg Machine height: 1,770 mm Features: - Latching emergency stop mushroom push button - Reversing switch for clockwise/counterclockwise operation - Motor protection switch - Stepless speed adjustment - Digital speed display - Protection rating: IP 54 - Plug connector (pre-installed, cable length 2m) - Spindle guard with electric interlock - Paint finish: DD textured paint light grey RAL 7035, anthracite RAL 7016

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: PRJ069841, ALZMETALL bench drilling machine, drilling capacity in steel 14mm. Chodelub Htepfx Afwed Short spindle MK2, spindle stroke: 80mm, throat depth: 190mm, column diameter: 65mm, machine table usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-table distance min./max.: 75/357mm, machine table height adjustment via handwheel, machine base plate, usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-base plate distance min./max.: 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Continuously variable speed 230-4000 rpm Standard equipment: 5" TFT LCD display with touch function: Manual input for target spindle speed, actual speed display, integrated drilling depth indicator with touch zero point transfer, virtual drilling depth scale on display, machine status displays and warning notices on display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, connection plug pre-installed, 2m cable length, three separate push buttons for clockwise – counterclockwise – stop, spindle holding via brake function, spindle guard with electrical interlock, lockable main switch, mushroom push-button (latching) for EMERGENCY STOP, stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD textured varnish signal white RAL 9003, PANTONE 7545c, black. Delivery time: from stock Waiblingen Beinstein.

Stanje: novo, Vrtalna zmogljivost v jeklu (premer): 30,0 mm Odmična razdalja: 293 mm Vrtalni hod: 140 mm Morse konus: 3 MK Miza: 515 x 360 mm Število vrtljajev: 225 - 4300 vrt/min Moč motorja: 1,0 / 1,6 kW Premer stebra: 115 mm Razdalja vreteno / miza: 132 / 724 mm Teža: 260 kg Višina stroja: 1790 mm Csdpexaa Ufsfx Afwehd Oprema: - Glavno stikalo, zaklenljivo - Gobni izklop za izredno zaustavitev - Preklopno stikalo za desni/levi tek - Motor z zaščito proti pregrevanju - Brezstopenjsko nastavljanje vrtljajev - Digitalni prikazovalnik vrtljajev - Zaščita IP 54 - Motor, razred izolacije "F" (155°) - Napajalni kabel (brez vtiča, dolžina kabla 2 m) - Zaščita vretena z električnim varovanjem - Barva: DD-strukturni lak, signalno bela RAL9003, PANTONE 7545c, črna

Stanje: rabljeno, Osnovna plošča Širina: 710 mm Dolžina: 710 mm Chjdpfe Agpgfex Afwod Višina: 210 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ALZMETALL AX 4 / SV Column Drilling Machine 3KW Manufacturer: Alzmetall Model: AX 4 / SV Condition: NEW Year of manufacture: 2025 Chedpfxjy S Axgs Afwjd Drilling capacity in steel E335 (St 60): 55 mm Tapping capacity: Steel E335 (St 60): M42 Cast iron EN-GJL-200: M56 Short spindle MK 4 Spindle stroke: 140 mm Usable throat: 300 mm Column diameter: 145 mm Machine table, usable surface: 615 x 430 mm Distance spindle-table min./max.: 150/735 mm T-slots: number x width x spacing: 2 x 14 x 224 mm Feed: 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Stepless drive Motor: 1500 rpm Power: 3.0 kW Spindle speed rpm: 70-2400 Standard equipment: - Main switch with motor protection switch, lockable - Mushroom emergency-stop button (latching) - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection rating IP54 - Spindle guard with electric interlock - Finish: DD textured paint, signal white RAL 9003, PANTONE 7545c, black - Machine oil: initial fill; loose container supplied Available options: - LED machine lamp - Tapping unit with soft start (from 2025) - Coolant system in the base - Digital drilling depth indicator - Fine drilling depth adjustment 0.1 mm

Stanje: dober (rabljeno), Leto izdelave: 2006, Moč vrtanja v jeklu (premer): 55,0 mm Izstop: 300 mm Hod vrtanja: 140 mm Število vrtljajev: 70 – 2300 vrt/min Miza: 615 x 430 mm Vrtalno vreteno – Morse konus 4, kratko vreteno MK Premer stebra: 145 mm Podajalna hitrost: 0,10 + 0,30 mm/vrt Razdalja vreteno / miza: 150 / 735 mm Teža: 380 kg Višina stroja: pribl. 1.850 mm Aktualna nova cena: pribl. 15.000 evrov Posebna cena na zahtevo Chsdpfxsz S N D Ee Afwed Oprema: - robustna stebrična vrtalna naprava »INDUSTRIE« * Pogon: jermenski pogon »VARIO« - samodejni podajalnik vretena * Naprava za podajanje: 0,1 + 0,3 mm/vrt * Zaščita proti preobremenitvi podajalnika - brezstopenjska nastavitev števila vrtljajev * Vključno z digitalnim prikazovalnikom števila vrtljajev - miza z nastavljivo višino, z 2x T-utori - smer vrtenja delovnega vretena desno / levo - luč za osvetlitev stroja - gumb za izklop v sili na sprednji strani - navodila za uporabo (PDF)

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Zmogljivost vrtanja v jeklo (premer): 40 mm Izstop: 293 mm Hod vretena: 120 mm Rezanje navojev do maks.: jeklo M24 Rezanje navojev do maks.: litina M30 Zmogljivost vrtanja v litino: 45 mm Vpenjalna konica vretena: MK3 Število vrtljajev vretena: 160–2250 brezstopenjsko vrt/min Podajanje: 0,10 +0,20 avtomatsko mm/vrt Razdalja vreteno/miza maks.: 117/701 mm Površina za pritrditev mize: 514 x 360 mm Premer stebra: 115 mm Skupna poraba energije: 1,9 kW Masa stroja pribl.: 285 kg Dimenzije stroja pribl. D x Š x V: 0,7 x 1,8 x 1,8 m Brezstopenjska nastavitev števila vrtljajev vretena Digitalni prikazovalnik števila vrtljajev Avtomatski podajalnik konusa Ročica za vklop in izklop avtomatskega podajanja Nastavljiva hitrost podajanja Nastavljiva globina vrtanja Desni in levi tek za rezanje navojev Zaklepni gumb za NUJNI IZKLOP Stikalo za zaščito motorja Csdpe Afhqiefx Afwjhd Električno varovan pokrov vretena Nastavljiva višina vrtalne mize s sponko za mizo in možnost vrtenja za 360° Stopnja zaščite IP54

Stanje: zelo dobro (rabljeno), Stolpni vrtalni stroj Alzmetall AC 25, letnik 1992. Zelo dobro ohranjen, možno ogledati pod napetostjo. Cedpjx Sqv Hjfx Afwshd

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 734, Premer vretena: 35/40 mm Nastavek vretena: MK 3 Chsdez Divqopfx Afwsd Število vrtljajev vretena v 2 skupinah in s strmo regulacijo: 160 – 2250 vrt/min Hod vretena: 140 mm Izstop: 293 mm Pogonski motor: 380 V, 1,5/1,9 kW Teža: 250 kg Potrebna površina: 900 x 550 x 1830 mm

Stanje: novo, Zmogljivost vrtanja v jeklu St 60: 18 mm Izrezovanje navojev v jeklu St 60: M 12 Izrezovanje navojev v sivem litju GG 20: M 14 Kratka vretena: MK 2 Število vrtljajev vretena: 225–4.300 vrt/min Gib vretena: 80 mm Previs: 190 mm Premer stebra: 65 mm Miza stroja – uporabna površina: 300 x 240 mm Število T-utorov – širina – razmik: 2 x 12 x 80 mm Razdalja vretena – miza stroja, min./maks.: 75/357 mm Osnovna plošča stroja – uporabna površina: 300 x 240 mm Število T-utorov – širina – razmik: 2 x 12 x 80 mm Razdalja vretena – osnovna plošča, min./maks.: 437/437 mm Chsdpszz Aihofx Afwjd Ročni pomik Ročno nastavljanje višine mize stroja Skupna poraba energije: 0,37/0,55 kW Višina stroja: 840 mm Serijska oprema: - Glavno stikalo z zaščitnim stikalom za motor, ki se zaklene - Stikalo za smer vrtenja v levo in desno - Nastavljanje števila vrtljajev, brezstopenjsko - Stopnja zaščite IP 54, izolacijski razred motorja „F“ (155 °) - Zaščita vretena z električno varovalko - Gumb za nujni postanek (z blokiranjem) - Barva: DD-strukturna barva, signalno bela RAL 9003, PANTONE 7545c, črna - Priključni kabel: brez vtiča, dolžina kabla 2 m

Stanje: dober (rabljeno), Leto izdelave: 1987, številka stroja/vozila: 640, Ponudba 26231 Tehnični podatki: - Zmogljivost vrtanja v jeklo St 60: 45 mm - Premer vrtanja v jeklo St 60: 55 mm - Nastavek za vreteno za vrtanje: dolgo vreteno, MK 4 - Število vrtljajev vretena za vrtanje, brezstopenjsko, v 2 vrstah: - 40 – 760 vrt/min - Hod vretena za vrtanje: 140 mm - Izmer: 300 mm - Premer stebra: 145 mm - Miza z 2 T-utorami: 460 x 420 mm - Razdalja med mizo in vretenom za vrtanje, min/maks: 35 / 640 mm - Razdalja med vretenom za vrtanje in obdelano podlago: pribl. 1150 mm - 3 nastavitve podajanja: 0,10 – 0,20 mm/vrtljaj - Pogon: 400 V / 1,8 / 2,9 kW Chsdpfezwm Uysx Afwsd - Hitro vpenjalna patrona - Strojna sponka - Potreben prostor: pribl. Š 600 x V 1800 x G 950 mm - Teža: pribl. 380 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, Dobro ohranjena rabljena stacionarna vrtalna naprava (stolpna vrtalna naprava) proizvajalca Alzmetall. Tip: Alzstar 40 Cedjz H T Euspfx Afwehd Kapaciteta: 40 mm

Stanje: novo, Zmogljivost vrtanja v St 60: 18 mm Rezanje navojev v St 60: M 12 Rezanje navojev v GG 20: M 14 Kratko vreteno: MK 2 Hitrost vretena: 225–4.300 min⁻¹ Hod vretena: 80 mm Izvitje: 190 mm Premer stebra: 65 mm Delovna površina strojne mize: 300x240 mm T-utorji - število, širina, razmak: 2 x 12 x 80 mm Razdalja vreteno–strojna miza min./maks.: 75/357 mm Osnovna plošča – uporabna površina: 300x240 mm T-utorji osnovne plošče - število, širina, razmak: 2 x 12 x 80 mm Razdalja vreteno–osnovna plošča min./maks.: 437/437 mm Podajanje ročno Višinsko nastavljanje mize z ročnim kolesom Skupna priključna moč: 0,37/0,55 kW Višina stroja: 840 mm Teža: 120 kg Standardna oprema: Csdpfoyv Nddsx Afwehd - Glavno stikalo z zaklepnimi zaščitnimi motornimi stikali - Preklopno stikalo za desni/levi tek - Brezstopenjska nastavitev števila vrtljajev - Stopnja zaščite IP 54 - Priključni kabel (brez vtikača, dolžina kabla 2 m) - Gobasti izklopni gumb (z aretacijo) za izklop v sili - Zaščita vretena z električnim varovanjem Opcija 12: - LED strojna svetilka z radialno nastavljivim svetlobnim snopom, priključna moč 230 V, stopnja zaščite IP 65

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Drilling capacity (steel): 18 mm Drilling capacity (cast): 23 mm Tapping capacity (steel): M14 Spindle taper: MT 2 Spindle travel: 100 mm Quill extension: 250 mm Column diameter: 90 mm Power: 0.55 kW Spindle speed: 125 – 2400 rpm / 225 – 4300 rpm Chodpokytxzsfx Afwod