Aluminij nakup rabljenega (1.808)

Stanje: novo, Leto izdelave: 2024, Underground Light-Alloy Circular Saw Brand: METALLKRAFT Model: ULMS 420 Article No.: 3627420 Condition: New machine Cutting range (square): 120 x 120 mm Speed: 2900 rpm Standard features include: Guedpfx Ahjtuch Eo Deh - Saw blade 420 x 30 x 4.0 mm Z 120 - Minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction ports for connection to a dust extraction system - Operating manual

Stanje: novo, Leto izdelave: 2024, Aluminum Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine primarily used for separating profile materials made of cast aluminum, copper, and hard plastics (solid materials to a limited extent). The machine stands out for its user-friendly operation and quick, convenient material changeover. This machine only permits 90° cuts! The saw feed is automatic and activated via push-button; material clamping is achieved by two pneumatically operated vertical and horizontal clamping cylinders respectively. Standard equipment includes a minimal quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction unit are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, marking laser, and pneumatic hood lifting system. Equipment Features - Large support table, high-performance drive motor - Two-button control to initiate the cutting cycle (optionally also available with one-button control) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material back gauge can be moved backward to increase cutting capacity - Large safety hood covering the entire work area Gjdpfx Ahopa Nxde Douh - Minimal quantity lubrication system with 2-liter reservoir - Adjustable blade and feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Operating Procedure 1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. Press the start button to make the machine ready for operation 7. Press and hold both SAW buttons to perform the cut 8. After the cycle is complete, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Technical data regarding cutting range, performance, etc. (see data sheet in email attachment). Plantec Maschinen GmbH

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, OMS Double Mitre Saw for Wood and Aluminium Specification: • Condition: Used, after inspection • Manufacturer: OMS • Main motors: 2 x 2.5 HP • Pneumatic head control • Max. cutting length: 351 cm • Min. cutting length: 34 cm • Max. cutting cross-section: 110x150 mm (at right angle) • Max. blade diameter: 300 mm • Extraction ports: Ø 60 mm Guedpew Htxtefx Ah Doh • Adjustable cutting angles: from -45 to +45 degrees (right, left) • Vertical clamps for workpieces • Weight: approx. 800 kg • Overall dimensions: 412 x 85 x 130 cm (L x W x H) Additional information: • Very good, original technical condition • The provided photos show the actual state of the item for sale • Possibility to start and test the machine on site

Stanje: novo, Leto izdelave: 2025, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio Gusdpfochqxxex Ah Dsh The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2025, Ne glede na delo, ki ga morate opraviti, je A700 edina žaga, ki jo boste kdaj potrebovali. Z največjo zmogljivostjo v svojem razredu in izjemnim razponom kotov zamika ±75º je zasnovana za pravo rezanje pod visokimi koti brez kompromisov glede velikosti aluminijastih profilov, ki jih je treba rezati. Primerna je za rezanje več profilov hkrati v snopu z visoko natančnostjo. Hitro obdelovanje aluminija z natančnim PLC krmiljenjem gibanja. Pnevmatsko vodena varnostna zaščita se odpira in zapira s pritiskom na gumb ter omogoča popoln in neoviran dostop do žagalne mize. Varnostno stikalo onemogoči delovanje žage ob dvigu zaščite. Gujdpfx Aemb U Tueh Djh Izbirno CNC-krmiljeno pozicioniranje kota zamika žage z nadzorno ploščo na dotik. • Ø700 mm TCT žagin list s 4 kW pogonskim motorjem • AS / NZS 4024:2014 varnostni standard, dvoročno rezanje • Nadglavna varnostna zaščita z varnostnimi tuneli po 900 mm na vsaki strani žage • Varnostna zaščita se pnevmatsko dvigne s pritiskom na gumb • Varnostno stikalo onemogoči delovanje žage pri dvignjeni zaščiti • 2x vertikalna in opcijsko 2x horizontalna vpenjala z nastavljivim pritiskom • Kot zamika ±75° s fiksnimi pozicijami na 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Sistem za brizgalno mazanje žaginega lista • Pihalna pištola za zrak in notranja LED osvetlitev • 2 × Ø100 mm priključka za odvod ostružkov • Opcijski 2,2 kW odsesovalnik ostružkov • Opcijski avtomatiziran sistem za krmiljenje zamika Izjemno primerna za: • Serijsko proizvodnjo aluminija • Proizvodnjo aluminijastih konstrukcij pod kotom • Proizvodnjo oken in vrat • Proizvodnjo žaluzij, senčil in pohištva • Proizvodnjo varjenih aluminijastih konstrukcij • Proizvodnjo aluminijastih fasad

Stanje: rabljeno, Leto izdelave: 2007, 5-axis CNC mobile gantry vertical machining center for milling, drilling, tapping, and cutting operations on 5 sides of aluminum profiles and light alloys. Technical description: - 5-axis electrospindle – A = +/- 90°, 12 kW with cooling unit Godpfxevgl Rcs Ah Djuh - Automatic tool changer with 18 positions + Ø400 mm saw blade, protected and mounted on a carriage sliding along the X axis - Working area – travel: X = 7500 mm; Y = 1500 mm; Z = 620 mm - Milling operations with linear and circular interpolation on X-Y-Z axes - 5-side machining - Capability for PENDULUM mode operation - No. 8 pneumatic clamps with automatic positioning - No. 2 pneumatic stops - Tool cooling system with central unit and minimal lubrication installation - CNC control, user manual and maintenance manual, CE certification included

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, Obseg rezanja okroglega jekla pri 90°: 220 mm, For sale: 1 used CNC aluminum circular saw automatic including extraction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC Year: 2015 TECHNICAL DATA • Cutting range round: 220 mm, rectangle: 300 x 90 mm, square: 175 mm • Drive power: 4.1 kW / 400 V / 50 Hz • Speed: 3,000 rpm • Cutting speed: 55 m/sec • Blade dimensions: 600 x 50 mm • Max. cutting height: 220 mm • Dimensions: 2,020 x 1,510 x 975 mm • Weight: 650 kg Guodpfx Ajuyyhajh Deh The machine comes complete with a 6 m infeed roller conveyor and matching extraction unit. The saw can be inspected at our warehouse in 09599 Freiberg.

Stanje: novo, Leto izdelave: 2024, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specially developed for cutting profiles and solid materials made from aluminium castings, copper, and hard plastics. Automatic feed and automatic cutting movement make the machine ideal for fast and precise series production! The material feed is up to 700 mm per stroke. Multiple strokes, and therefore longer cut lengths, can easily be set using the operator panel. The main clamping vice secures the material using two horizontal and two vertical clamping cylinders, while the material feed is clamped using one horizontal and one vertical clamping cylinder. Cutting and feed speeds can be adjusted to suit the material via the large and clearly laid-out operator panel! The machine comes equipped with a mechanical lift height adjustment; the maximum cutting height is 100 mm. A large protective hood covers the entire working area and can be raised pneumatically at the touch of a button! An air blow gun for cleaning the machine is supplied as standard with the UK 350 A 90° CNC + drilling unit! Connections for a chip extraction system are provided. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Features: • 90° cutting machine with powerful drive motor • CNC control; number of pieces and cut lengths easily programmable via the large, clear operator panel • Storage for up to 20 cutting programs • Feed driven by servo motor, single feed 700 mm (for longer parts, feed advances automatically to the desired length) • Main clamping vice with 4 pneumatic clamping cylinders, 2 horizontal, 2 vertical • Feed clamping vice with horizontal and vertical pneumatic clamping cylinders • Large safety hood covers the entire work area, pneumatically operated • Adjustable cutting and feed speeds • Max. cutting height 100 mm • Air gun for cleaning the machine • Connections for extraction system • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with a tool holder • Adjustment of spindle speed, drilling depth, etc. via machine control, drilling cycle operates automatically Technical data: Drive power: 1.9 kW / 400 V / 50 Hz Guodpfx Ahjkqz H Ds Dsh Speed: 3000 rpm Blade dimensions: 350 x 32 mm Material feed, single stroke: 700 mm Max. cutting height: 100 mm Dimensions: 1400 x 850 x 970 mm Optional loading magazine available! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2025, 3 CNC axes for length and electronic tilting of saw blades: outward to 22.5° and inward to 135° Cutting length 5000 mm Processing of individual cuts Processing of cutting lists Creation of cutting lists via keypad Import of cutting lists via USB storage device or network Automatic miter angle/incremental cut Processing of extended length cuts Gujdpfxjwnfvtj Ah Dsh Short cuts from 5 mm cutting length Cross cuts Management of label printing with data or barcodes Hydropneumatic saw blade feed, continuously adjustable Pneumatic safety guards Moving roller conveyor on the right saw unit with additional clamping cylinder Length positioning taking into account saw angles and profile height Profile height measurement with length compensation including horizontal clamping cylinder Each saw unit with one horizontal and one vertical clamping cylinder Additional horizontal clamping cylinder on the fixed saw unit to the left of the saw blade 1 piece profile support between saw units, pneumatically swivelling With two-hand control IPC with Windows Embedded and HMI 15.0" touchscreen Including the options: Minimal quantity spray device Label printer Network connection for teleservice, 1 year license We always have suitable extraction systems in stock, also for existing aluminium saws!

Stanje: dober (rabljeno), Leto izdelave: 1997, ALU circular saw semi-automatic, saw blade Ø 350 mm, cutting capacity Ø approx. 125 mm, motor 3.7 / 4.5 kW, 2-speed 1420/2880 rpm, vertical clamp, stops at 30°, 45°, 60° and 90° on both sides, saw blade; dimensions 100x115x155 cm, approx. 600 kg Godpfxstqfvyo Ah Douh

Stanje: novo, Leto izdelave: 2025, Steigern Sie Ihre Produktivität beim Aluminiumsägen mit einer der flexibelsten und leistungsstärksten Sägen auf dem Markt. Die A550 ist speziell für Gehrungsschnitte mit großem Winkelbereich konzipiert und bietet Ihnen einen enormen Säge-Gehrungsbereich von ±75°. Unterstützt durch ein großdimensioniertes Sägeblatt erhalten Sie echte Hochwinkel-Kapazität – ohne Kompromisse bei der Schnittgröße Ihres Aluminiums. Ideal für das Bündigschneiden mehrerer Profile gleichzeitig und für höchste Präzision ausgelegt. Hochgeschwindigkeits-Aluminiumbearbeitung mit präziser, SPS-gesteuerter Bewegungsführung. Pneumatisch betätigte Sicherheitsabdeckung: Öffnen und Schließen per Knopfdruck für vollständigen, ungehinderten Zugang zum Sägetisch. Sicherheitsschalter deaktiviert die Säge bei geöffneter Schutzhaube. Optional: CNC-gesteuerte Gehrungswinkelverstellung mit Touchscreen-Bedienfeld. Gsdpomb U Tfsfx Ah Deuh • Ø550 mm Hartmetall-Sägeblatt mit 4 kW Antriebsmotor • AS / NZS 4024:2014 Sicherheitsstandard, Zweihand-Bedienung für den Schnittvorgang • Überkopf-Sicherheitsabdeckung mit Schutztunneln, je 900 mm beidseitig der Säge • Sicherheitsabdeckung pneumatisch anhebbar per Knopfdruck • Sicherheitsschalter deaktiviert Sägefunktion bei angehobener Abdeckung • 2x vertikale und optional 2x horizontale Spannzangen mit einstellbarem Spanndruck • Gehrungsbereich ±75° mit Rastpunkten bei 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Sprühnebel-Kühl-/Schmiersystem für das Sägeblatt • Druckluftpistole und LED-Innenbeleuchtung • 2× Ø100 mm Anschluss für Späneabsaugung • Optional: 2,2 kW Späneabsauger • Optional: Automatisches Gehrungseinstellungssystem Hervorragend geeignet für: • Fenster- und Türenherstellung • Herstellung von gehrungsverschraubten Aluminiumkonstruktionen • Fertigung von Aluminium-Strukturen • Verbundwerkstoffbearbeitung • Produktion von Jalousien, Sonnenschutz und Möbeln • Aluminiumeinzelhandel

Stanje: novo, Leto izdelave: 2024, Aluminium Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (limited suitability for solid materials). The machine is characterized by its easy operation, quick and convenient material change, and simple mitre angle adjustment. The UK 800 HA offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is actuated automatically at the press of a button; material clamping is provided by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! The machine is also equipped with connections for a chip extraction system. Additionally, optional features include a digital mitre angle display, a laser marking system, and pneumatic lifting for the safety hood. Equipment - Double mitre 20° – 90° – 20°, large support table - High-performance drive motor - Two-button control for saw activation (optional one-button control available) - Clear control panel - Adjustable blade feed rate Gjdpfxoidun Ie Ah Deuh - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade diameter: 800 mm Workflow 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Move the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the START button to ready the machine 7. Press and hold both SAWING buttons to initiate cutting 8. After the cycle, release both SAWING buttons and press the STOP button 9. Open the clamping vice and remove or advance the material You are welcome to inspect the desired equipment at any time in our production/showroom. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, The 40 MP is a single-head saw with a top-down cutting action, featuring a saw blade with a diameter of 400 mm. The saw table can be manually adjusted to an angle of +/- 45°. The saw head can be manually tilted outwards from 0° to 45°. The 40 MP single-head saw is equipped with horizontal clamping cylinders for correct profile clamping, minimum quantity lubrication, and mechanical protection of the sawing area. Guodpfxorfapaj Ah Djh Please also take note of our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc.

Stanje: novo, Leto izdelave: 2025, Nadgradite svojo proizvodnjo aluminija z žago za hitro, varno in skladno rezanje, ki izpolnjuje zahteve za varnost in zdravje pri delu (OHS). A420 je enostavna žaga za razrez aluminijastih profilov manjših dimenzij, bodisi naravnost ali pod kotom (do ±75°). Zagotavlja izjemno varnost z dvoročnim vodenjem reza in popolno zaščito žaginega lista (vključno z varnostnimi tuneli dolžine 900 mm na vsaki strani), ki preprečujejo dostop do žage in nenadzorovano izmetavanje odrezkov. Pnevmatsko dvigovanje in spuščanje zaščitnega pokrova zgolj s pritiskom na gumb. Varnostno stikalo preprečuje delovanje žage pri dvignjenem pokrovu. • Žagina plošča Ø420 mm iz trde kovine (TCT) z 2,2 kW pogonskim motorjem • Skladnost z varnostnim standardom AS / NZS 4024:2014, delo z dvoročnim upravljanjem • Zgornji varnostni pokrovi s tuneli, vsak 900 mm na svoji strani • Dvigovanje zaščite s pritiskom na gumb za nemoten dostop do delovne mize • Varnostno stikalo izklopi žago ob dvignjenem pokrovu • 2× vertikalna in 2× horizontalna prijemala z nastavljivim pritiskom • Nastavljiv kot rezanja (mitra) do ±75° • Premična zadnja ograja za povečano kapaciteto rezanja • Sistem pršenja-meglice za mazanje žaginega lista • Pnevmatska pištola za čiščenje in notranja LED osvetlitev • Priključek Ø100 mm za odvod ostružkov • Opcijsko: 2,2 kW ektraktor za odsesavanje ostružkov Gjdpfx Ahomb U Tbj Dsuh Idealen za: • Proizvodnjo oken in vrat • Proizvodnjo pisarniške opreme • Sestavljanje podatkovnih centrov • Proizvodnjo linearne razsvetljave • Proizvodnjo senčil in zaves • Predelavo kompozitnih materialov

Stanje: novo, Leto izdelave: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material possible to a limited extent). The machine stands out due to its user-friendly operation, quick and convenient material change, as well as easy mitre angle adjustment. The UK 352 HA offers an infinitely adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the press of a button, and material clamping is provided by two pneumatically operated vertical clamping cylinders. As standard, the machine comes equipped with a minimum-quantity lubrication system and an air blow gun for machine cleaning! Connections for a chip extraction system are also available on this machine. Equipment • Precision under-table circular saw • Mitre adjustment: 45º left / 90º / 45º right • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device interface • Mist spraying system for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included! Guodpfxsgwt Rvj Ah Doh You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH

Leto izdelave: 2023, Stanje: novo, The semi-automatic circular saw UK 500 HA is an upcut machine primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (solid materials to a limited extent). The machine is characterized by its ease of use, quick and convenient material change, and simple miter angle adjustment. The UK 500 HA offers an infinitely variable miter range: up to 30° to the left and up to 0° to the right. Saw feed is automatic at the press of a button, while material clamping is performed by two pneumatically controlled vertical and two horizontal clamping cylinders. This machine comes standard with a minimum-quantity lubrication system and an air blow gun for cleaning the machine. The unit is also equipped with connections for a chip extraction system. Features • Precision under-table circular saw • Infinitely adjustable miter settings: 0º/45º/90º/ -45º/ -60º • Includes 2 pneumatic vertical clamps • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device with connection for extraction system • Mist lubrication system for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer • Ergonomically arranged control panel Gusdpfx Ajgwt R Deh Doh • Maximum cutting height: 180 mm • Saw blade: 500 mm • Saw blade not included in delivery! You are welcome to inspect the equipment at any time in our production or demonstration hall. Please feel free to contact us to arrange a viewing.

Stanje: novo, Leto izdelave: 2024, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Guedpfspa Nxaex Ah Dsh Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for machine cleaning - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Aluminum Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials only to a limited extent). This machine is characterized by its ease of operation, quick and convenient material change, and simple mitre angle adjustment. The UK 352 P offers an infinitely adjustable mitre range—up to 45° to the left and 0° to the right. Saw feed is automatic at the push of a button; material clamping is managed by two pneumatically controlled vertical clamping cylinders. Standard features include a minimum quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are available on this machine. Features - Manual saw blade guidance - Double mitre: 30° – 90° – 0°, large support table - Powerful drive motor - User-friendly control panel Gujdpfsidunvox Ah Deh - Two vertical pneumatic clamping cylinders - Fixed material stop jaw (can be moved backwards to increase cutting capacity) - Large protective cover completely enclosing the work area - Minimum quantity lubrication system - Air blow gun for cleaning the machine - Saw blade ø 350 mm Workflow 1) Set the cutting angle 2) Insert the material 3) Move the clamping cylinders to within 20 mm of the material 4) Pneumatic clamping of the material 5) Press the start button to activate the saw blade 6) Perform the cut manually using the hand lever 7) After the cut, switch off the machine! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH

Leto izdelave: 2023, Stanje: novo, The semi-automatic circular saw UK 352 HA is an upcut saw primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine stands out due to its easy operation, quick and convenient material changeover, and straightforward adjustment of the mitre angle. The UK 352 HA features a continuously adjustable mitre range from 45° to the left to 0° to the right. The saw feed is fully automatic, activated via push button; material clamping is performed by two pneumatically controlled vertical clamping cylinders. As standard, this machine comes with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Features • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right 45º • Includes 2 pneumatic vertical clamps • Infinitely variable saw blade feed • Two-hand safety control Gjdpfsgwt Rysx Ah Douh • Adjustable rear material stop • Chip extraction interface for dust collection system • Mist spray system for air-oil cooling • Air blow gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Maximum cutting height: 125 mm • Saw blade diameter: 350 mm • Saw blade not included in the scope of delivery!

Stanje: novo, Leto izdelave: 2024, Aluminium Circular Saw UK 650 HA, Semi-Automatic The semi-automatic circular saw UK 650 HA is an "upcut" machine, primarily used for cutting profile materials made of aluminium casting, copper, and hard plastics (with limitations for solid materials). The machine is characterized by simple operation, quick and convenient material change, and easy mitre angle adjustment. The UK 650 HA features a continuously adjustable mitre range up to 20° to the left and right (swivel range twice 70°). Saw feed is automatic via push button, with material clamping provided by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine is equipped with a minimum quantity lubrication system and an air blow gun for cleaning the machine! Connections for chip extraction systems are available on this machine. Optionally, the machine can also be equipped with a digital mitre angle display, a marking laser, and pneumatic lifting for the safety guard. Equipment - Double mitre 20° – 90° – 20°, large support table - Powerful drive motor - Two-button operation to initiate the cutting process (optional single-button operation available) - User-friendly control panel - Adjustable blade and feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved backwards to increase cutting capacity - Large safety guard covering the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Work process 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. Press the start button to make the machine ready for operation. 7. Press and hold both SAW buttons, material will be cut. 8. Upon completion of the cycle, release both SAW buttons and press the STOP button. 9. Open the clamping stock and remove or advance the material. You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Godpeidun Defx Ah Douh Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, The semi-automatic circular saw UK 352 HA is an up-cut machine predominantly used for cutting profile materials made of aluminium castings, copper, and hard plastics (solid materials only to a limited extent). The machine is characterised by its user-friendly operation, rapid and convenient material change, and easy mitre angle adjustment. The UK 352 HA features a continuously adjustable mitre range from 45° to the left and 0° to the right. Saw feed is automatic via push button, and material clamping is provided by two pneumatically operated vertical clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are available on this machine. Equipment: • Precision underfloor circular saw • Mitre adjustment: 45° left / 90° centre / 45° right • Includes 2 pneumatic vertical clamps • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction unit for chip extraction system • Mist spraying unit for air-oil cooling Gujdegwt Rrepfx Ah Deh • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically positioned control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/showroom facility. Please feel free to contact us. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Aluminum Circular Saw UK 352 M, manual The manual circular saw UK 352 M is an "upcut" machine primarily used for single cuts in aluminum and copper profiles as well as hard plastics (including limited solid materials). The machine is distinguished by its straightforward operation, rapid and convenient material change, and easy mitre angle adjustment. The UK 352 M features a steplessly adjustable mitre range from 45° left to 0° right. Saw feed is performed manually using a hand lever, with manual clamping of the material. Equipment - Double mitre 45° – 90° – 0° - Large support table - High-performance drive motor - Clearly arranged control panel - One manual clamping cylinder - Fixed material stop can be moved to the rear to increase cutting capacity - Large safety guard covering the entire working area - Saw blade ø 350 mm Work Process 1) Set the cutting angle 2) Insert the material 3) Manually clamp the material 4) Press the start button to run the saw blade 5) Perform the cutting operation manually with the hand lever 6) After finishing the cut, turn the machine off! You are welcome to visit and inspect the desired machine at any time in our production/showroom. Please feel free to contact us for an appointment. Gsdpfxoidunne Ah Dsuh Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine and is mainly used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials subject to certain conditions). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-600 A offers stepless mitre adjustment to the left and right up to 20° (swivel range twice 70°). Saw feed is automatic at the push of a button, and the material is clamped by two pneumatically operated vertical and horizontal clamping cylinders each. As standard, this machine comes with a minimum quantity lubrication system and an air spray gun for cleaning! Connections for a chip extraction system are available on the machine. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Features • Precision under-table circular saw • Stepless mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device for connection to extraction system • Minimum quantity lubrication device for air-oil cooling • Air spray gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade diameter 600mm • Saw blade not included in delivery! Gedpfxogcbwgs Ah Douh You are welcome to view the desired machine at any time in our manufacturing/showroom. Feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, Product innovation: Sawing System Type "ORIX" This sawing system allows for fully automatic processing of a wide variety of aluminium profiles. The machine features a robust base frame. For positioning the saw unit, linear guides and precision carriages are used. The drives are equipped with servo motors. For sawing, the saw unit travels 300 mm forward on the Y-axis, making it easy to cut special profiles, plates, as well as Item and Bosch profiles. The support table is equipped with movable rollers, which automatically position themselves according to the cut length. All rollers are also mounted on precision carriages. Additionally, the saw system has a sturdy discharge table for placing the cut aluminium parts. (Optionally, the sawn parts can be directly transported away via a conveyor belt, including chips.) The machine is available with a 6,000 mm cutting length, resulting in a total length of 7,000 mm. The saw system comes with a suitable 2-channel minimum quantity lubrication system. The machine will also be delivered with a 400 mm or 600 mm saw blade. Your benefits: • Virtually scratch-free as the material does not slide over a cast table • Improved chip disposal (no extraction required) • Extremely compact footprint: 4,000 mm / 7,000 mm • Smaller offcut (50 mm remnant length) • Safe operation (light curtain) Godpfx Aefu Tgreh Djuh • Easy disposal of material (conveyor belt or table with brushes) • No reset required as with standard automatic saws • No dimensional losses • Plug-in rollers that securely accommodate any type of special profile, ensuring a perfect cut Work process Enter the profile length via the control system. The saw unit then moves to the specified length. The operator loads the aluminium profile and starts the saw. Using a head cut detection sensor, the saw locates the head cut position and performs the initial cut. After the cut, the saw unit returns and repositions for the next programmed coordinate, then cuts the aluminum profile again. These steps are repeated until the profile is completely cut. All sawn pieces are gently placed on the discharge table or on the conveyor belt to protect the material. The material is clamped directly on the saw unit using vertical and horizontal clamps, as with conventional aluminium saws. After the aluminium profile is cut, the saw unit automatically returns to the next feed position. The process can then be repeated. As an option, cross conveyors for automated feeding can be integrated. For safety, fences or a light curtain can be installed. Two different control options are available: 1) Diethei control system, 2) Siemens control system. Optional material sorting into various containers or by different lengths is also possible. You are welcome to view the desired system at any time in our production or demonstration hall. Please feel free to contact us for more information. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2024, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid materials possible to a limited extent). The machine is characterized by simple operation, quick and convenient material change, and easy mitre angle adjustment. The UK-400 A offers an infinitely adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is activated automatically at the push of a button, while material clamping is achieved via two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine is equipped with a minimum quantity lubrication system and an air spray gun for machine cleaning. Connections for a chip extraction system are provided. Additionally, this machine can be optionally fitted with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety guard. Equipment Gedpegwt Rnjfx Ah Djuh • Precision under-table circular saw • Infinitely adjustable mitre adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction device – chip extraction system • Mist spray unit for air-oil cooling • Air gun with coiled hose • Maintenance unit with pressure reducer included • Ergonomically arranged operator panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/demo hall. Please feel free to contact us. Plantec Maschinen GmbH