65 Y nakup rabljenega (27.157)

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 365 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is, as standard, performed via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. When used in combination with processing machines, inspection or rework fixtures (deburring, marking, inspection) can be adjusted in height to match the clamping table of the machine. Bdodpfx Asfk Aivofqsk The table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for fastening and securing, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and prepared for repairs in the maintenance area. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively if worn. Table 2 below provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!!

Stanje: zelo dobro (rabljeno), Model: 4M/65E Stanje: Zelo dobro Dimenzije: 80,00 (V) x 60,00 (Š) x 120,00 (D) palcev Dodatni opis: - Avtomatski kopirni stružnica - Za izdelavo lopat, motik, držal, opor za puške, sekir, nog, kriket palic ipd. - Obdeluje 4 kose hkrati. - Rezkar (brez priključka za brušenje) - Regulacija hitrosti na vozičku. - Deluje odlično Bsdpfx Aoxz Tfajfqsdk

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Parametri stroja: Pomik v osi Z: 165 mm Pomik v osi X: 150 mm Maks. število vrtljajev vretena: Bdsdpfx Aox Apqujfqsk 100-6000 1/min Dimenzije stroja (d x š x v): 1200x1000x150 mm Teža stroja: 1058 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Siemens Sinumerik 840D control system Bar capacity: 65 mm Spindle speed: 5,000 rpm 2 x 12-station turrets with driven tools Turret 1 with Y-axis Bdsdjwh U D Hspfx Afqok Parts catcher Band filter system Chip conveyor IRCO Profimat bar feeder

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL251EG1087, stružna dolžina: 705 mm, premer struženja: 356 mm, izvrtina vretena: 81 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 100 mm, pomik po osi Z: 795 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 30 m/min, skupna višina: 2.220 mm, skupna dolžina: 3.100 mm, skupna širina: 1.920 mm, skupna masa: 6.200 kg, prehod palice: 80 mm, Gib pinole konjička: 734 mm, Oprema: dokumentacija / priročnik, CNC Lathe Mori Seiki NL2500Y/700 – with Y-axis – Used & Refurbished, Immediately Ready for Use Machine in excellent condition, fully overhauled and operational. Suitable for precision machining with Y-axis and live tooling. Main specifications: - Year of manufacture: 2005 - CNC: Mori Seiki MSX-850 - Maximum swing diameter: 755 mm - Maximum turning diameter: 356 mm Bdjdpfevw Ackex Afqsk - Maximum turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle & Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4000 rpm - 12-position turret - Live tooling up to 6000 rpm - Included: 4 live tool holders and 7 static tool holders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverses X/Z: 30 m/min Other features: - Tailstock (734 mm stroke, MT3 taper) - Hinged belt chip conveyor - Tool presetting system - Parts catcher Dimensions and Weight: - Footprint: 3100 x 1920 x H 2220 mm - Weight: 6200 kg Machine supplied with: - 2x radial driven tools - 1x axial driven tool - 8x static holders (boring bar holders and tool holders) The machine is available for testing and demonstrations, including via video call, and is immediately ready for use.

Stanje: novo, Table height: 650 - 1050 mm; Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm; Table width: 1230 mm; Table length: 2480 mm; Approx. weight: 555 kg. This allows the user to flexibly adjust the working surface height to meet specific requirements, improving both efficiency and ergonomics. The height adjustment is performed as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. When used in conjunction with machining equipment, inspection or reworking fixtures (such as deburring, marking, or testing) can be adapted precisely to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools, thanks to their various mounting and securing options. Once removed from the machine, tools can be safely serviced on-site and transferred to maintenance for repairs as needed. The fully bolted construction of the clamping plate allows for cost-effective replacement of the working surface in case of wear. Bedpfxsfk Aicj Afqodk Price must be confirmed with the manufacturer before ordering!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 945 kg This enables the user to flexibly adjust the working surface height to meet specific requirements, thereby improving efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within the range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 hole grid. Used in combination with machining equipment, the table allows test or finishing fixtures (deburring, marking, or inspection) to be adapted to the height of the machine's clamping table. The table systems can be relocated easily using a pallet jack. These mobile systems, with their various fastening and safety features, have proven ideal for the maintenance of injection molding and die-casting tools. After removal from the machine, tools can be serviced safely on-site and transported to maintenance for repairs. The fully bolted construction of the clamping plate allows for the cost-effective replacement of the work surface in case of wear. Price must be obtained from the manufacturer prior to ordering!! For accessories and further information, please follow this link: Bdodefk Ainspfx Afqek

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Table length: 1980 mm Weight approx.: 630 kg This enables the user to adjust the working surface height flexibly to the respective requirements, improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic system within a range of 800 mm (on request, other heights available). Like the SST fix series, the worktop is equipped with a 100 x 100 mm Ø 28 mm hole grid. When used in combination with machining equipment, inspection or post-processing fixtures (deburring, marking, checking) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated using a pallet jack. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced on site and then transferred to maintenance for repairs. Due to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link: Bdedpfx Afjfk Aipjqok

Stanje: novo, Table height: 650 - 1050 mm Bdjdpfx Afsfk Ai Ajqsk Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 358 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). The worktop, as with the SST Fix series, also features a 100 x 100 mm Ø 28 perforated grid. When used in combination with processing machines, inspection or reworking fixtures (deburring, marking, checking) can be adapted to match the clamping table height of the machine. The table systems are easily relocated using a pallet jack. These mobile systems, with various fastening and securing options, have proven to be ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Dimensions (LxWxH): 2980 x 1480 x 65 to 105 Width: 1480 mm Length: 2980 mm Approximate weight: 840 kg Bedpfxofk Ah Ie Afqsdk Welding and assembly tables from the SMT flex series are robust, height-adjustable, and practical workstations designed for handling heavy workpieces, operating electrically powered tools, or working with chemical and oily substances. Thanks to transport bars integrated into the base, the tables can be easily moved with a pallet jack and their height can be quickly aligned with other working surfaces. Height adjustment ranges from 650 mm to 1,050 mm (lower working heights available upon request). The solid steel worktop, up to 20 mm thick, withstands heavy impacts or blows—such as those common when using heavy hand tools or handling very heavy metal workpieces or tools—without suffering lasting deformation or dents. The steel worktop also allows unrestricted use of magnetic clamps for securing components. Due to its substantial dead weight, this universally applicable table offers excellent stability against tipping, even under heavy loads or tools and when set at its maximum working height. For accessories and further information, please follow this link:

Stanje: novo, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Bjdpfxjttc Ute Afqsdk Width: 1,700 mm Blade length: 10 mm Throat depth: 305 mm Stroke: 55 mm - With one cylinder - 5 workstations: punching, notching station, as well as flat bar, round bar, and angle steel shearing stations. Supplied in the following configuration: - Technical documentation - Hydraulic and electrical components from renowned manufacturers - Foot pedal - Selector switch for setup and operation modes - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station - CE-compliant design SPECIFICATION / VALUE Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per min. (at 20 mm stroke): 25 Plate thickness (max.): Ø 26 x 20 mm Working height: 900 mm Shearing capacity: - 375 x 15 mm - 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Supply voltage: 400 V / 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Bdodpfetvhxmex Afqok Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg CNC Press Brake 3200 mm x 200 t Standard equipment: ----- Robust construction CNC axes Y1, Y2, X, and R CNC crowning device motorized with CNC control Original DELEM DA 58 T 15" touchscreen CNC control Backgauge with linear guide and ball screw, 4 stop fingers 2 sheet support arms Laser safety device on upper beam Quick clamping system for upper tooling Upper tool system: Promecam Amada segmented and gooseneck Multi-V die system compatible with both Promecam and Amada systems CE-certified safety equipment

Stanje: novo, Table height: 650 – 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Approx. weight: 425 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Standard height adjustment is performed manually via a hydraulic system within the 650 – 1050 mm range (other heights available upon request). The worktop also features a Ø 28 mm hole grid with a 100 x 100 mm spacing, just like the SST fix series. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the machine. The table systems can be easily relocated on site with a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools due to their various mounting and securing options. After removal from the machine, tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of future wear. The following Table 2 provides an overview of the available standard models. Bedpfx Aofk Aixefqjdk Price must be confirmed with the manufacturer before ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. Bdjdpofk E Dzofx Afqjk The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Weight approx.: 428 kg This allows the user to flexibly adjust the working surface height to meet the specific requirements, thereby improving productivity and ergonomics. Height adjustment is standardly performed by a manual hydraulic system in the range of 650 – 1050 mm (higher or lower adjustment available upon request). The table systems can be easily moved on site with a pallet truck. These mobile systems have proven ideal, particularly with various fastening and securing options, for maintenance of injection molding and die casting tools. After removal from the machine, tools can be safely serviced on site or transferred to the maintenance department for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The price must be requested from the manufacturer before ordering! Bdsdpsgrvwiofx Afqek For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 – 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Bdedpfofk E D Dsx Afqek Table length: 1950 mm Approx. weight: 490 kg This enables the user to flexibly adjust the working surface height according to the specific requirement, improving efficiency and ergonomics. The height adjustment is performed as standard by a manual hydraulic system within the range of 650 – 1050 mm (other heights available on request). Like the SST fix series, the tabletop features a 100 x 100 mm grid with Ø 28 mm holes. When used in combination with processing machines, inspection or finishing fixtures (deburring, marking, inspection) can be adapted to the clamping table height of the machine. The table systems are easily moved on site using a pallet truck. These mobile systems have proven ideal, with various mounting and securing options, for the maintenance of injection moulding and die casting tools. Once removed from the machine, the tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of future wear. Price must still be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Dimensions (LxWxH): 1980 x 1480 x 65 to 105 mm Width: 1480 mm Length: 1980 mm Weight approx.: 575 kg Bdodpsgrz Tdjfx Afqsk Welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for processing heavy workpieces, handling electrically powered tools, or working with chemical and oily substances. Thanks to transport handles on the base, the tables can be easily relocated with a pallet truck and the height can be smoothly adjusted to different working levels. The height adjustment range covers 650 mm to 1,050 mm (lower working heights available upon request). The solid steel worktop, up to 20 mm thick, can withstand heavy impacts and blows—such as those that commonly occur when using heavy hand tools or handling very heavy metal workpieces or tools—without sustaining lasting deformations or notches. The metal worktop allows unrestricted use of magnetic clamps for securing components. Due to its high dead weight, this universally applicable table provides excellent stability and safety against tipping, even when loaded with heavy objects or tools at the maximum working height. For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1480 x 1480 x 650 to 1050 mm Bjdpogrz Tlofx Afqjdk Table width: 1480 mm Table length: 1480 mm Weight approx.: 464 kg This system allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic mechanism in the range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on-site using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for maintenance of injection molding and die-casting tools. Immediately after removal from the machine, the tools can be safely serviced on site and transported for repairs to maintenance. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!!

Stanje: novo, Leto izdelave: 2022, Dimensions (LxWxH): 3660 x 1340 x 2500 mm Number of Axles: 3 Pressure: 120 tons Weight approx.: 7000 kg Oil Capacity: 200 liters Motor Power: 11 kW Press Brake Control Unit: Esa S 630 CNC 10, 2D graphic touchscreen Control Unit Operator Panel: Swiveling pendant arm Optional Hydraulic Press Brake Valve: With CE safety signals Press Brake Safety PLC: Mcs PLC safety logic controller Press Brake Laser Safety System: DSP-AP safety block (manual laser height adjustment) Press Brake Backgauge: X-axis, 500 mm reach, manual adjustment, includes 2 fingers, adjustable in height and lateral position Backgauge Stop Fingers: Standard Rear and Side Guards: Installed (CE-compliant model) Press Brake Upper Tool Clamping: Manual European type, 150 mm (Promecam) Upper Tool for Press Brake: Eurostamp 1260 / Standard (835 mm and 805 mm, split into 595 mm and 210 mm) Bsdpfx Afehut Aaeqedk Lower Die Holder for Press Brake: Mechanical European type, standard width (Promecam) Press Brake Crowning: CNC-adjustable motorized crowning (V-axis) Lower Die for Press Brake: Eurostamp 2067 / Standard (835 mm and 805 mm, split into 100 mm left, 395 mm, 210 mm, and 100 mm right) Press Front Support for Press Brake: XF front support Front Support for Press Brake: 2 supports, manually adjustable in height and lateral position Electrical System: 380 V–660 V, 50–60 Hz, 3 phase (IE3) Cabinet Cooling System: Fan ventilation Number of Foot Pedals: One Label Group: English Label Group Packaging Method: Plastic cover with stretch film

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 475 kg This allows the user to flexibly adjust the working surface height according to specific requirements, thereby improving efficiency and ergonomics. Height adjustment is standard via a manual hydraulic mechanism within a range of 650 – 1050 mm (other heights available on request). The worktop, as with the SST fix series, features a 100 x 100 mm, Ø 28 mm hole grid. When used in combination with processing machines, inspection or post-processing devices (such as deburring, marking, or testing fixtures) can be adjusted to match the clamping table height of the machine. Bodpfxjfk E D As Afqsdk The table systems can easily be relocated using a pallet truck. These mobile systems, with their various fixing and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and then moved to maintenance for repairs. The fully bolted design of the clamping plate enables cost-effective replacement of the working surface in case of wear at a later date. Price must be confirmed with the manufacturer prior to ordering! For accessories and additional information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Approx. weight: 308 kg Bsdpfxogrvv To Afqodk This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is standardly effected via a manual hydraulic system, with a range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on site using a pallet truck. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die casting tools. After removal from the machine, tools can be safely serviced on site and then transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1400 x 900 x 650 to 1050 mm Table width: 900 mm Table length: 1400 mm Approx. weight: 305 kg This allows the user to flexibly adjust the working surface height according to specific requirements to improve efficiency and ergonomics. The height adjustment is provided as standard by a manual hydraulic system within a range of 650 – 1050 mm (other heights available upon request). Bdodpogrvwbefx Afqok The table systems can easily be relocated onsite using a pallet truck. These mobile systems have proven ideal due to their various fastening and securing options for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced onsite and then transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be requested from the manufacturer prior to ordering!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1480 x 1480 x 800 mm Table width: 1480 mm Table length: 1480 mm Weight approx.: 602 kg This enables the user to flexibly adjust the working surface height to the respective requirements, improving efficiency and ergonomics. The height adjustment is provided as standard by a manual hydraulic system within a range of 800 mm (other heights available on request). Like the SST fix series, the worktop also features a 100 x 100 mm grid with Ø 28 mm holes. Bdjdpfx Afsgrz Ttjqok When used in combination with processing machines, test or reworking devices (deburring, marking, inspection) can be adjusted to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems, with various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely maintained on site immediately after removal from the machine and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, if the work surface wears out over time, it can be replaced cost-effectively. Price must be requested from the manufacturer before ordering!! For accessories and further information, please follow this link:

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg Bdedpfxjttxh Ns Afqsk CNC Press Brake 3200 mm x 200 t Standard equipment: ----- Robust design CNC axes: Y1, Y2, X and R axis CNC crowning device, motorized, with CNC control CNC controller Original DELEM DA-58T, 15” touchscreen Backgauge with linear guide and ballscrew, with 4 stop fingers 2 sheet support arms Laser safety device on upper beam Quick clamping system for upper tool Upper tool system: Promecam Amada segmented gooseneck die Multi-V die system; both Promecam and Amada systems possible CE safety equipment

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Maximum stroke length: 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Approx. weight: 14,000 kg CNC Press Brake 3200 mm x 200 to Standard equipment: Bdedetvhxispfx Afqok ----- Robust construction CNC axes: Y1, Y2, X, and R axis CNC-controlled motorized crowning system Original DELEM DA-58T CNC control, 15-inch touchscreen Back gauge with linear guide and ball screw, with 4 stop fingers 2 sheet supporter arms Laser safety device on upper beam Quick-clamp system for upper tool Upper tool system: Promecam/Amada segmented, gooseneck design Multi-V die system, compatible with both Promecam and Amada systems CE-compliant safety equipment