4 Strani Planer nakup rabljenega (61.126)

Stanje: novo, We offer you here a new workbench from the manufacturer Metal Sistem for purchase. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Scope of delivery includes: 02x workbench legs, new Material colour: fully galvanized Leg type: TS4 Dujdpohq Txwjfx Ad Aep Including cross and diagonal braces, footplates Legs are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench beams, new Beam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material colour: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material colour: black 02x swivel castors, new 02x brake/swivel castors, new 01x angle bracket set, new For attaching the worktop 04x securing hooks, new Material colour: fully galvanized

Stanje: dober (rabljeno), Included in the delivery: 56x Stackable transport boxes, used Manufacturer: SSI Schäfer Type: 14/6-4 Design: Double-sided recessed grips Colour: Blue Dusdpfxspl T Ude Ad Aep Material: Polypropylene External dimensions (LxWxH): 210x150x123 mm Internal dimensions (LxW): 190x123 mm Usable height when stacked: 110 mm Volume: 2.50 litres Stackable: Yes Weight per item: 0.266 kg Weight per package: approx. 17.00 kg Note: These are used stackable transport boxes. There may be scratches, soiling, and colour defects. Application area: These stackable transport boxes are suitable for storing tools, fasteners, and other small parts. General information about shipping: - Nationwide shipping within Germany is free of charge - Shipping to islands is excluded

Stanje: dober (rabljeno), The delivery includes: Dedpfjpl Uc Tox Ad Asup 261x stackable transport boxes, used Manufacturer: SSI Schäfer Model: 14/6-4 Design: double-sided recessed grips Colour: blue Material: polypropylene External dimensions (LxWxH): 210x150x123mm Internal dimensions (LxW): 190x123mm Usable height when stacked: 110 mm Capacity: 2.50 litres Stackable: yes Weight per unit: 0.266 kg Weight per pallet: approx. 95.00 kg Note: These are used stackable transport boxes. There may be scratches, contamination, and colour defects. Application area: The stackable transport boxes are suitable for storing tools, fasteners, and other small parts. General information regarding shipment of the item: - Shipping within Germany is free of charge - Island delivery is excluded - Delivery is to kerbside only - Unloading access must be suitable for a 40t articulated truck - Unloading must be carried out by the buyer using a forklift

Stanje: skoraj kot novo (rabljeno), Technical Data for Long-Span Shelving System: Shelving System: SSI Schäfer Type: WR 600 Technical Data for Installation: Number of shelving rows: 01 pc. Number of levels incl. ground level: 04 pcs. Included in delivery: 02x Long-span shelf uprights, 2nd choice (new goods) Material colour: Sendzimir galvanized Upright profile: 60 x 31 x 1 mm Incl. cross and diagonal braces, Dodpfx Adsqhkh Ae Asup 01x Swivel / brake castor | 01x Fixed castor Castor Ø: 100 mm (Bolted truss construction) 2,195 mm high 1,050 mm deep 08x Long-span shelf beams, 2nd choice (new goods) Material colour: RAL 7035 light grey Box section: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Specification: Step beam Locking clips: 5 HK (hooks) Clear width: 2,400 mm 04x Chipboard panels, 2nd choice (new goods) Thickness: 22 mm Dimensions: 2,380 x 960 mm Specification: butt edges all around 16x Locking pins, new Specification: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Transport or shipping beyond this is subject to additional costs, which can be requested from us individually depending on the place of delivery or scope of supply.

Stanje: novo, We are offering you a new workbench from the manufacturer Metal Sistem for purchase. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Model: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Scope of delivery includes: 02x Workbench frames, new Frame color: fully galvanized Frame type: TS4 Incl. cross and diagonal braces, base plates The frames are pre-assembled (screwed truss construction) 888 mm high 700 mm deep 02x Workbench beams, new Beam type: TS Profile dim.: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x Worktop, new Wood type: MDF Thickness: 28 mm Duedpohq Tqdjfx Ad Aep Dimensions: 900 x 1,200 mm Material color: black 01x Angle set, new for fastening the worktop 04x Safety hooks, new Material color: fully galvanized

Stanje: dober (rabljeno), Included in delivery: 1,044x stackable transport containers, used Manufacturer: SSI Schäfer Type: 14/6-4 Version: Double-sided recessed grip Colour: Blue Material: Polypropylene External dimensions (LxWxH): 210x150x123 mm Internal dimensions (LxW): 190x123 mm Usable height when stacked: 110 mm Capacity: 2.50 litres Stackable: Yes Weight per piece: 0.266 kg Weight per pallet: approx. 95.00 kg Total weight for 1,044 pcs.: approx. 380.00 kg Note: These are used stackable transport containers. Scratches, soiling and colour deviations may be present. Application: The stackable transport containers are suitable for storing tools, fasteners and other small parts. General information about the article: This item is offered for collection only. If transport or shipping is required, this can be arranged at additional cost, which can be quoted separately depending on destination and order size. Dodpopl Tf Ejfx Ad Aeup

Stanje: dober (rabljeno), Tehnični podatki o paletnem regalnem stojalu: Regalni sistem: Dexion Tip: S 4 V obsegu dobave je vključeno: 01x paletno regalno stojalo, rabljeno Barva materiala: sendzimir pocinkano Tip: H Dimenzije profila: 81,7 x 77,21 x 2,5 mm Vključno s prečnimi in diagonalnimi povezavami, Talne plošče Stojala so predmontirana (vijačen okvir) Višina: 11.050 mm Globina: 1.100 mm Vaše kontaktne osebe pri nas: Gospod: Andre Evering Dedpfx Ajxxq Tvsd Aoup Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Za morebitno dodatno transport ali pošiljanje tega artikla nastanejo dodatni stroški, ki jih je možno individualno preveriti glede na kraj dostave in obseg dobave.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.000 mm, skupna dolžina: 3.690 mm, skupna višina: 8.350 mm, Na prodaj: robustne industrijske jeklene stopnice s štirimi etažami, primerne za uporabo v proizvodnih halah, tovarnah in tehničnih obratih. Konstrukcija je sestavljena iz več podestov s fiksnimi stopnicami in je izdelana iz jekla, opremljena z varnostnimi ograjami (rumena barva) okoli vseh platform. Stopnišče je zasnovano za intenzivno industrijsko uporabo in zagotavlja varen dostop do višje nameščenih naprav ali strojev. Konstrukcija je prostostoječa, stabilna in primerna za fiksno pritrditev na betonska tla. Specifikacije: Tip: industrijske platformne stopnice / delovna ploščad Material: jeklo Število etaž: 4 Skupna višina: pribl. 8,35 m Višina podestov: 1. etaža: pribl. 1,81 m 2. etaža: pribl. 3,60 m Djdpfoyf Un Ssx Ad Aoup 3. etaža: pribl. 5,40 m 4. etaža: pribl. 7,22 m Širina: 200 cm Dolžina: 396 cm Dolžina stopnic (poševno): pribl. 3,96 m Izvedba: fiksne stopnice z vmesnimi podesti Varnostna oprema: ograje okoli vseh podestov

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, obratovalne ure: 6.000 h, potovalna razdalja osi X: 3.550 mm, pomik osi Y: 1.680 mm, pomik po osi Z: 275 mm, hitrost pomika os X: 80 m/min, največja hitrost vretena: 24.000 obr/min, TECHNICAL DETAILS Travel range X-axis: 3,550 mm Travel range Y-axis: 1,680 mm Travel range Z-axis: 275 mm Main spindle speed max.: 24,000 rpm Working area X-axis: 3,060 mm Working area Y-axis: 1,210 mm Working area Z-axis: 100 mm Feed rate X: 80 m/min Feed rate Y: 80 m/min Feed rate Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction nozzle diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 stations, traveling Side pick-up station for 2 tools Traveling pick-up station for HSK F63 aggregate/tool Duedpfx Ajyc Smgod Ajp 14 vertical drilling spindles (9 in X-direction and 5 in Y-direction) 6 horizontal drilling spindles (4 in X-direction and 2 in Y-direction) 1 grooving saw (4–10 mm), arranged along the X-axis 1 main spindle HSK F-63, 9 kW Prepared for 0–360° C-axis 6 consoles for mounting vacuum clamps Traveling laser for vacuum cup positioning 2 machining zones for pendulum operation Hand terminal Automatic central lubrication Note: Container loading and seaworthy packing by the seller is not possible.

Stanje: dober (rabljeno), Manufacture: alloyed Tip: 4 sec Dedpfouhn Dcox Ad Ajup Turntable

Stanje: dober (rabljeno), Manufacturer: ALLOYD Type: 4 seec Rotary table Dedpfx Aeuhn Diod Aeup

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.250 mm, pomik osi Y: 1.265 mm, pomik po osi Z: 120 mm, premer žaginega lista: 120 mm, Oprema: CE označba, Prodajač lahko prevzame demontažo in nakladanje! TEHNIČNE PODROBNOSTI Delovno območje X: 3.250 mm Djdpoyddqmofx Ad Aoup Delovno območje Y: 1.265 mm Delovno območje Z: 120 mm Vpenjalo za orodje: HSK-F63 Menjalnik orodij: 10 pozicij, nameščen na glavi rezkarja Agregati za vrtanje in žaganje Navpična vrtalna vretena: 12 Vodoravna vrtalna vretena X-os: 4 Vodoravna vrtalna vretena Y-os: 2 Enota za utorno rezkanje v smeri X: 1 Premer žaginega lista: 120 mm Sistemska miza Podnožna in tirna miza: prisotna Konzole: 6 PODROBNOSTI STROJA Pogonski podatki Moč glavnega motorja: 9,2 kW Skupna priključna moč: 15 kW Moč vakuumske črpalke: 100 m³/h OPREMA Pomoč pri pozicioniranju Varnostna preproga Numerični LED prikazovalnik na konzolah Pomožna naprava za menjavo orodja Dve vrsti zamaškov Podložke za obdelovance Ročna upravljalna enota Nihajno obdelovanje CE oznaka

Stanje: novo, Leto izdelave: 2007, številka stroja/vozila: 0711ST0619, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 13 m/min, največja hitrost vrtenja: 12.000 obr/min, Prodajalec lahko poskrbi za demontažo in nakladanje! Dražba neuporabljanega Format 4 Felder Perfect 40! TEHNIČNI PODATKI Hitrost podajanja: 13 m/min Največja debelina materiala: 3 mm Moč motorjev čelilnih žag: 0,5 kW Hitrost motorjev čelilnih žag: 12.000 vrt/min Moč motorjev rezkalnih in profilnih enot: 0,68 kW Hitrost motorjev rezkalnih in profilnih enot: 12.000 vrt/min Hitrost motorjev enote za poliranje: 1.400 vrt/min PODROBNOSTI O STROJU Električni podatki Dusdjyddmnepfx Ad Aep Napetost: 400 V Faze: 3N Frekvenca: 50 Hz Moč: 8 kW OPREMA Giljotina za obdelovalni material do 3 mm Teflonsko prevlečen lepilni lonec za 3 kg EVA granulata Avdio generator Lepilni valj z hitro zamenljivim sistemom Pnevmatska pritiskalna enota, 1 gnani in 2 stožčasta pritiskalna valja Čelilne žage s HW krožnimi listi Z = 24, d-100 x 20 x 3,2 mm Rezkalna in profilna enota z možnostjo nagiba do 15° Rezkalnik za rob R = 2 mm Polirna enota z 2 motorjema

Stanje: dober (rabljeno), Heidelberg Stahlfolder Ti 52 4/4/1 stroj za zgibanje Stroj je konfiguriran za zgibanje do 16 strani. Tehnične specifikacije: Minimalna velikost papirja: 105 x 150 mm Maksimalna velikost papirja: 520 x 840 mm Visokozmogljivo podajanje Konfiguracija: – 4 kasete na prvem modulu Ti-52 – 4 kasete na drugem modulu 2.Ti-52 – 1 elektronski nož – Mobilna dostava Nastavitev hitrosti zgibanja z inverterjem Zmanjšanje hrupa kaset Beckerjev kompresor Senzor dvojnega lista Elektronski števec z razvrščanjem Duodsx Nc Atjpfx Ad Ajp Električna dostava z nastavljivo hitrostjo dostave. Rezervni deli, orodje in dokumentacija so vključeni. Stroj je v dobrem stanju in pripravljen za uporabo.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 815 x 740 x 1140 mm Weight: 232 kg Total power requirement: 4.5 kW Thickness planer PLANERMAX 410 ECO - Maximum planing width: 405 mm - Passage height: 220 mm - Table size: 750 x 408 mm - Maximum cutting depth: 5 mm - Minimum workpiece length: 156 mm - Motor power: 4 kW - Voltage: 400V / 50Hz - Feed speed: 6.5 m/min - Extraction port: 120 mm Duedpfx Adsvz H Dae Aep - Cutterhead diameter: 95 mm - Cutterhead speed: 4200 rpm - Number of knives: 3 pcs - Footprint: 985 x 968 x 955 mm - Transport dimensions (L/W/H): 815 x 740 x 1140 mm - Weight: 232 kg Scope of delivery: - Strip planing knives installed (410 x 3 x 30 mm) - Knife setting gauge

Stanje: zelo dobro (rabljeno), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Was mounted on a VTC 300, now for sale due to upgrade to a new 5-axis machine. Dujdpjp U Umksfx Ad Asp

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Dusdpfx Asu R S Nwsd Aop Motorized positioning control for milling unit x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Duedjd Tbbdspfx Ad Aep - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. Djdpfefdkb Tsx Ad Ajup The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg Duodped Tqaljfx Ad Aep - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) Dusdpfx Aefdkb Uod Asp - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. Dusdpfx Adjguk Dko Aep The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Dsdpfx Adjfdkbhj Aoup The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg Dujdpfx Aoguk Dved Ajp - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, višina police: 3.500 mm, dolžina opore: 2.700 mm, dolžina police: 8.500 mm, višina okvirja: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 1.100 mm, število vrst polic: 4, prostor za palete: 108 evropske palete, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material Dsdpfxov Ukz Aj Ad Ajup - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement