Žice O Zavezujočih Stroj nakup rabljenega (85.856)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Travels: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Water bath incl. chiller Isdpfsm Uyuxsx Ah Dotn Automatic wire threading

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, obratovalne ure: 4.985 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 500 kg, potovalna razdalja osi X: 400 mm, pomik osi Y: 300 mm, pomik po osi Z: 220 mm, višina obdelovanca (maks.): 215 mm, širina obdelovanca (maks.): 700 mm, dolžina obdelovanca (maks.): 800 mm, A DEMO machine from our TOOL SHOP in Sofia, Bulgaria. Table length: 640 mm Table width: 540 mm Maximum workpiece dimensions: 810 x 700 x 215 mm Travel paths X / Y / Z: 400 x 300 x 220 mm V-Axis: 120 mm U-Axis: 120 mm Maximum workpiece weight: 500 kg Controller: M800 D-CUBES Wire diameter: 0.1 - 0.3 mm Machine weight: approx. 3.1 t Required floor space: approx. 2.8 x 2.1 x 2.1 m Machine design: Hybrid construction Machine includes: - ODS – Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection on XYUVZ axes - Intelligent AT – automatic wire threading for wire diameters 0.10 – 0.3 mm - Automatic fine-hole detection function - Easy 3D setup for workpiece position recognition Iodpfx Ahjw Ni Tqs Dotn - 5 controlled axes – prepared for additional axes - PFC – Precise Finish Circuit - H-FS – Finishing Level - LLS – Long Life System - 10 kg wire station - 4-sided frame table – hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric Control M800 D-CUBES: - 19” full-touch monitor with gesture control - Hand pendant with configurable LCD display - Job planner including job interruption function

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 4, Electric High-Performance Cutting Machine / High Speed Wire Cutting Machine RENZ HSC-E Year of Manufacture: 12/2011 - Serial No. 460007150.50107 - Cutting capacity: up to 3,000 pcs/hour - Cutting length: 3 – 99 loops, variably adjustable - Piece counter: Yes - Processable diameters: 3/16" - 1 1/4" (5.5 – 32 mm) - Pitch: 2:1, 3:1, 4:1 - Changeover time (diameter to diameter): 2 – 10 minutes - Power supply: 230 V / 50 Hz - Dimensions (L x W x H): 110 x 82 x 100 cm - Gross weight: 74 kg Online video inspection via Skype available. Isdpfsiit Ifex Ah Djtn We kindly invite you to visit us – more machines in stock. Available immediately – machine can be inspected. Located in Emskirchen / Nuremberg – test run possible.

Leto izdelave: 2005, Stanje: generalkompletno obnovljen (rabljeno), AGIECUT Progress 3 Year of manufacture: 2005 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel distances: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Ijdpfxjgzv Sco Ah Dstn Submerged machine with automatic wire threading and wire re-threading after breakage Maximum threadable height: 420 mm With manual front door (accessible from one side) Including AGIEJOGGER hand pendant for convenient setup AGIE IPG high-performance generator AGIEVISION control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be completely overhauled and thoroughly tested by us. You will receive a 6-month warranty on the machine. Commissioning and training can also be offered upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 1.500 kg, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 260 mm, skupna višina: 2.350 mm, skupna dolžina: 2.500 mm, skupna širina: 2.300 mm, višina obdelovanca (maks.): 260 mm, širina obdelovanca (maks.): 650 mm, dolžina obdelovanca (maks.): 940 mm, skupna masa: 6.000 kg, CNC wire-cut EDM machine in very good condition. Fully inspected by Makino service technicians. The machine has been cleaned, and all pumps have been checked, fitted with new bearings, and sealed. Ijdpfx Ahewww Nqo Dotn

Leto izdelave: 2002, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Amperage: 50 A Table length: 780 mm Table width: 630 mm Table feed rate: 1 - 1,300 mm/min Wire feed rate: 15.00 m/min Control: W21F AP-2 Workpiece dimensions: 1050 x 800 x 295 mm Workpiece weight: max. 800 kg Itedpfx Ahjnh R Nke Djn MACHINE DETAILS Total power requirement: 12.00 kW Machine weight: approx. 4.50 t Space requirement: approx. 3.00 x 3.50 x 2.50 m

Stanje: rabljeno, Leto izdelave: 1976, Number of stitching heads: 1 Itedpfx Aev Ach Roh Don

Stanje: rabljeno, Leto izdelave: 1967, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D08L/8408, Številka ponudbe: D08L/8408 Vrsta stroja: Stroj za ravnanje in rezanje žice Proizvajalec: WAFIOS Tip: R3 Leto izdelave: 1967 Območje premera: 1,5-7 mm Itsdpfxswzktqe Ah Dsn Dolžine odrezkov: 2000 mm Hitrost – metri/min: 90 Lokacija: Pri nas na zalogi

Leto izdelave: 2008, Stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge V3 Year of manufacture: 2008 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel ranges: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading With automatic lowering tank (accessible from two sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D AGIEVISION 5 CNC control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and extensively tested by us upon receipt of order. Itedpfem Amf Dox Ah Den Incl. operator training at Techma on your overhauled machine Optionally available: transport, commissioning, training, chiller

Leto izdelave: 2007, Stanje: generalkompletno obnovljen (rabljeno), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (non-submerged) Achievable surface quality: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy machine setup AGIE IPG-V generator AGIEVISION 5 control Isdpsmmfwujfx Ah Dotn Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility upon order placement. A 6-month warranty is provided on all machine components. Commissioning and training services are available upon request.

Leto izdelave: 2000, Stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge 3 Travel distances: X = 500 mm, Y = 350 mm, Z = 256 mm U/V axis travel distances: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.3 μm Mean contour tolerance Tkm +/- 5 μm Available wire diameters: 0.20 – 0.33 mm Submerged operation with automatic wire threading With automatic, drop-down work tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient setup Including AGIESETUP 3D AGIEVISION control system AGIE HSS generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Including 6-month warranty. Itsdpjfdl N Ijfx Ah Don Commissioning and on-site training can be provided upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Isdjv Hbygspfx Ah Djtn Achievable surface finish: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has been cleaned, overhauled, and tested at our facility. We are happy to perform a customized test cut for you upon request. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, The GF AgieCharmilles CUT 30P from 2011 is a powerful and precise used wire EDM machine, specifically developed for demanding machining tasks in the metalworking industry. Leveraging state-of-the-art technology and intelligent control systems, the CUT 30P delivers outstanding cutting quality, low maintenance requirements, and excellent return on investment. Key Features & Benefits: ✅ Large Working Area: Workpiece dimensions: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1,000 kg Travel distances X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Taper cutting up to ± 25° / 80 mm ✅ High-Precision Machining: Positional accuracy with glass scales Automatic wire tensioning for consistently precise cutting results Surface finish up to Ra < 0.25 µm ✅ Efficient Wire System: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and re-threading 25 kg wire spool for extended operating times ✅ Intelligent Control & User-Friendliness: Windows-based control system with intuitive user interface 15” LCD display for easy programming DXF import & 3D graphics check for precise simulation Iedpfx Aov S Ua Doh Dotn ✅ Reliability & Low Operating Costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust design and long-life wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – the perfect choice for precise and cost-effective wire EDM! 📌 Our used machine from 2011 is cleaned, overhauled, and extensively tested before sale to ensure top quality and reliability. 📩 Contact us for a personalized offer or to arrange a demonstration! We are also happy to offer commissioning and training on the machine.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, AGIECUT Classic 2S Year of manufacture: 2001 Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Ijdpfx Ajv Dkvroh Dotn Our machines are cleaned and completely overhauled upon receipt of order. Afterwards, an acceptance test cut with optimal surface quality is performed. You will receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Leto izdelave: 2006, Stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged operation with automatic wire threading With automatically lowering tank (accessible from 2 sides) Itjdpfsgfm Rrsx Ah Dsn Including AGIEJOGGER hand-held box for convenient setup Including AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Upon receipt of order, the machine will be cleaned, overhauled, and thoroughly tested by us. We will then commission the machine at your facility. You will receive a 6-month warranty on the machine. We are also pleased to offer the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, AGIECUT Progress V2 Year of manufacture: 2009 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Iodpfxevax Ius Ah Dstn Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled after order confirmation. A test cut with optimum surface finish is performed for final acceptance. You will receive a 6-month warranty on the machine. Commissioning and on-site training are also available upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 2000 Year of manufacture: 2012 Equipped with AWC (Automatic Wire Changer) for the use of two different wire diameters Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm Itsdsv I T Dgopfx Ah Djn Submerged machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. glass scales for X and Y axes VISION 5 control 15" LCD color monitor, handy keyboard, and mouse Dimensions (L x W x H): 2095 x 1950 x 2232 mm Net weight: 3600 kg Includes 6 months warranty The machine is fully refurbished and tested by us. A customized test cut is possible upon request. We also offer on-site commissioning and training for this machine.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Iodpfjwprq Tsx Ah Djtn Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient set-up Incl. AGIESETUP 3D Incl. automatic wire changer AWC (for use with 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Upon receipt of order, the machine is completely cleaned, overhauled and thoroughly tested. A laser measurement of the axes is performed at our facility. We are also happy to carry out an individual test on the CUT 3000 for you. Including user training at Techma on your overhauled machine We also offer the following options: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Itjdpfx Aerzt Rwjh Don Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receiving the order. We are also pleased to offer commissioning and training services.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, AGIECUT Classic 2S Year of manufacture: 2006 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Iodpfx Ahjuzvkgs Detn Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Submerged machine with automatic wire threading and wire re-threading after breakage With manual front door (accessible from one side) Incl. AGIEJOGGER hand box for easy setup AGIE IPG generator AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled after receipt of order. A test cut with premium surface finish is performed for final acceptance. You receive a 6-month warranty on the machine. Commissioning and on-site training can be offered on request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles Progress VP2 Year of manufacture: 2018 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Ijdpfx Ahewcmcwo Dstn Includes AGIEJOGGER handbox for convenient setup AGIE IPG-V generator with power module AGIEVISION 5 CNC control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon order receipt. Afterwards, a test cut is performed with the best surface quality for acceptance. You will receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, AGIECUT Excellence 3 Year of manufacture: 2003 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Itsdpfxerr Uzws Ah Den Available wire diameters: 0.10 – 0.33 mm Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION control system AGIE IPG generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Including operator training at Techma on your overhauled machine Optional: Transport, commissioning, chiller

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Challenge V2 Year of manufacture: 2007 Travel paths (X/Y/Z): 350 x 250 x 256 mm Isdpfxewqcm Uo Ah Djtn Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER hand-held box Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. We are also happy to offer you commissioning and training services.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 400 Sp Year of manufacture: 2013 Control system: HMI 1 Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Maximum taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg (K250) Overall dimensions of the complete unit: 2670 x 2870 x 2645 mm Total weight of the unit: 6300 kg The machine is in stock at our warehouse. Upon receipt of order, it will be cleaned, completely overhauled, and fully tested for all functions. Optional: - Commissioning of the machine at your facility - On-site training - Cooling unit - Transport Ijdswmmvljpfx Ah Djtn - Clamping bar set

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 426 mm, model krmilnika: AGIEVISION 5, The seller provides a 6-month warranty on all machine components. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 426 mm Travel U/V-axis: ± 70 mm Machining Performance Max. taper: 30° at 100 mm height Itjdpfxswh Sgls Ah Djn Max. cutting speed: 500 mm²/min Achievable surface finish: Ra: 0.20 µm Available wire diameters: 0.15 – 0.33 mm Workpiece Data Max. workpiece dimensions: 1,050 x 650 x 420 mm Max. workpiece weight (in water bath): 400 kg Max. workpiece weight (without water bath): 800 kg Generator & Control Generator: AGIE IPG-V Control: AGIEVISION 5 MACHINE DETAILS Dimensions (L x W x H): 1,940 x 2,300 x 2,600 mm Net weight: 3,460 kg EQUIPMENT - Submerged machine with automatic wire threading - Automatic re-threading after wire breakage - AGIEJOGGER hand-held unit for convenient setup