Žice Šivanje Stroj nakup rabljenega (28.369)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22076049, Premer žice (maks.): 9 mm, moč: 18 kW (24,47 KM), premer vzmeti: 120 mm, premer žice (min.): 2 mm, proizvodna zmogljivost: 5.400 enota/h, The machine was retrofitted with a new control unit in 2000! This is a programmable, electronically and hydraulically controlled universal spring coiling machine for the production of right- and left-hand wound tension and compression springs as well as leg springs. The springs can be manufactured with any pitch and shape of the spring body. TECHNICAL DETAILS Wire diameter max.: 9 mm Wire diameter min.: 2 mm Maximum output: 90 pcs/min Spring outer diameter: 10 - 120 mm Wire feed speed: 27 - 80 m/min Unlimited wire feed length Two-finger system Wire diameter: 2 - 9 mm Spring outer diameter: 10 - 120 mm Single-finger system Wire diameter: 3 - 7 mm Spring outer diameter max.: 60 mm MACHINE DETAILS Operating voltage: 380 V / 50 Hz Fpodpezb Dapefx Ahmeh Control voltage: 220 V Total power requirement: 18 kW Dimensions & Weight Machine dimensions (L x W x H): 3,300 x 1,500 x 1,450 mm Lubrication unit dimensions (L x W x H): 830 x 650 x 1,000 mm Control cabinet dimensions (L x W x H): 700 x 1,500 x 1,750 mm Machine weight: approx. 5 t FEATURES 5x feed rollers, wire handling 3 mm two-finger Spring length measuring device (Model: LION PRECISION-PANTHER) Wire spool holder POST, motor-driven, mandrel holder (diameter: 1,400 mm) Lubrication unit Control cabinet cooler RITA Hydraulic power unit

Stanje: rabljeno, Leto izdelave: 1989, Model - 600/6 Leto - 1989 Matrice primerne za vlečenje jeklene žice z nizko vsebnostjo ogljika, vhodni premer največ 5,5/6 mm. Gre za dve zrcalni matrici, ena ima 5 stopenj, druga 6 stopenj. Vse z bobni za vlečenje premera 600 mm. Fpjdpfx Ahjyubh Remsh Obe imata navpični vitel za navijanje žice v zanke. DC električna oprema je vključena. Matrice bodo prodane v stanju "rabljeno, delujoče, vidno in sprejeto s strani kupca".

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Kombinirana enota: Proizvajalec: GSG Podajalnik: Tip: 840.02-027 Drobilnik/lupilec: Tip: 663.02-017 Obseg žice: Ø5,5–16 mm Za valjano žico z natezno trdnostjo pribl. 40–60 daN/mm² Drobilni in upogibni valji: s karbidnimi vložki Nastavitev z reduktorskim motorjem 0,37 kW – 1,15 A Pogon krtače z reduktorskim motorjem 0,25 kW, n = 293 min⁻¹ Priključna napetost: 380–420 V, 50 Hz Enota za suho prevleko: tip: BSG/T Polnjenje: kalcijev stearat (npr. Traxit tip: D S 51 E) Poraba stearata: pribl. 350 g na tono žice Hitrost vlečenja: maks. 15 m/s Pogonska moč: 2 x 0,55 kW reduktorska motorja Kaseta: 2 reži (priloženo 1x valjčni blok + 1x kaseta) Tip: PKG/T (TS) Očiščena valjana žica Trdnost žice pribl. 40–60 daN/mm² Fpjdpor Nfvmefx Ahmsh Obseg žice: maks. vhodni premer 9,5 mm, končni premer 3,5–8,5 mm Dimenzije valjev: min. Ø115 mm, maks. Ø125 mm Premer izvrtine: Ø82 mm, širina 15–25 mm Premer hladilnega zatiča: 25 mm Poraba hladilne vode pribl. 600 l/h Vlečna stroj: Proizvajalec: Koch Tip: KHZ 5000 Leto izdelave: 1993 Serijska številka: 13.821 Število vlečnih postopkov: 1 vlečenje na blok Vlečni boben: Ø700 mm Vlečna sila: mehansko 5000 N Material žice: mehko jeklo Vhodna trdnost: pribl. 40–45 daN/mm² Maks. vlečni razpon: vhodni premer 5,0–8,5 mm Redukcija preseka: 20 x 25 % (mehanično) Vlečna hitrost: maks. 7,0 m/s Zavora: Twiflex, tip: MRB Pogon: asinhronski motor / frekvenčni pretvornik, Siemens PN=110 kW, n=1485 min⁻¹ Navijalec: Proizvajalec: Koch Tip: KHS 1250 Leto izdelave: 1993 Tovarniška št.: 13741 Premer žice: 5–8,5 mm Trdnost: pribl. 55–70 daN/mm² Hitrost navijanja: V = 7 m/s, prilagojeno vlečnemu stroju Teža polnjenja: pribl. 3000 kg Pogon navijalnega bobna: trofazni motor z zunanjim ventilatorjem Tip: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P = 37 kW, n = 1000–2000 min⁻¹, IP54, izvedba B3 Pogon za spiralno polaganje: 66-671U, 1,5 kW, 170 V, 9,8 A, 1680 min⁻¹, IP44, B5-200 S pritrjenim tahogeneratorjem TG 20, 20 V / 1000 min⁻¹ S pritrjenim čelnim zobnikom SK 32, i = 57,53, izvedba B6 Hidravlika: hidravlični agregat tip: H13 AK Pnevmatika: kolutna zavora Twiflex tip: MRB Pnevmatski cilinder tip: SPWG 28032-25 mm hod Dimenzije: 3100 × 3000 × 1700 mm (D × Š × V) brez uteži

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), 2D žica stroj za savijanje Godina - 2017. Proizvođač - VIBRA Promjer žice - 1-4 mm Kapacitet - 30 komada/min Snaga - 3,5 kW Fsdpfomqk Tpjx Ahmsph

Leto izdelave: 1997, stanje: dober (rabljeno), EVG Polybend upogibni stroj za sponke PBE 2-16 z dvema odvijalnima stojaloma – letnik 1997 priložena popolnoma nova originalna krmilna enota EVG Območje premera za posamezno žico: 6–16 mm Območje premera za dvojno žico: 6–12 mm Napetost: 400 V Fpedpfx Ahsn Ut A Somjh 50 Hz 30 kW Leto izdelave: 1997

Stanje: novo, Leto izdelave: 2022, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Naprodaj: İkra Makina IPM 2850 avtomatski stroj za upogibanje in oblikovanje trakov in žic. Ima pritisk 12 ton in servo motor moči 15 kW, kar zagotavlja natančno delovanje za žice s premerom 6-16 mm. Stroj je opremljen z orodji, primernimi za izdelavo ceviščnih objemk. Z uporabo drugih orodij je možno upogibanje različnih vrst žic in trakov. Nikoli ni bil uporabljen za serijsko proizvodnjo – narejenih je bilo le nekaj preizkusnih kosov. Prodaja se zaradi preklicanega projekta. Ponudba vključuje 6 orodij, stiskalnico in ustrezni stroj za varjenje matic. Velikosti trenutnih orodij: • 40-44 • 48-54 • 55-59 • 60-66 Fodpfjxuhd Dex Ahmeph • 68-73 • 75-80

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 61 988, more MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Fpjdsp H Tkijpfx Ahmjh

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 1395, more MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Fsdpfx Ahsdtcchemjph

Leto izdelave: 2005, stanje: generalkompletno obnovljen (rabljeno), AGIECUT Progress 3 Year of manufacture: 2005 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel distances: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Fsdsgzv Scepfx Ahmoph Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged machine with automatic wire threading and wire re-threading after breakage Maximum threadable height: 420 mm With manual front door (accessible from one side) Including AGIEJOGGER hand pendant for convenient setup AGIE IPG high-performance generator AGIEVISION control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be completely overhauled and thoroughly tested by us. You will receive a 6-month warranty on the machine. Commissioning and training can also be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Charmilles Millenium control system Travel (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Fpjdpfx Aeuuz Iiohmsh Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Max. workpiece dimensions: 1450 x 900 x 510 mm Max. workpiece weight: 3000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg capacity (K250) Overall system dimensions: 2670 x 2870 x 2645 mm Total weight of system: 6300 kg The machine will be cleaned, fully overhauled, and tested for all functions upon receipt of order. Options: - Commissioning of the machine at your facility - On-site training - Cooling unit - Transport - Clamping bar set

Leto izdelave: 2008, stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge V3 Year of manufacture: 2008 Fpodpfx Ajm Amf Dohmjh Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel ranges: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading With automatic lowering tank (accessible from two sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D AGIEVISION 5 CNC control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and extensively tested by us upon receipt of order. Incl. operator training at Techma on your overhauled machine Optionally available: transport, commissioning, training, chiller

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles Progress VP3 Année de fabrication : 2009 Courses : X= 500 mm, Y= 350 mm, Z= 426 mm Courses axes U/V : +/- 70 mm Conicité maximale : 30° à 100 mm de hauteur Dimensions maximales de la pièce : 1050 x 650 x 420 mm Poids maximal de la pièce : 400 kg (en bain) / 800 kg (hors bain) Qualité de surface obtenue : Ra : 0,20 µm Vitesse de découpe maximale : 500 mm²/min Diamètres de fil disponibles : 0,15 – 0,33 mm Machine à fil immergé avec insertion automatique du fil et réinsertion après rupture Porte avant manuelle (accès d’un côté) Inclut la télécommande AGIEJOGGER pour un réglage aisé Générateur AGIE IPG-V Commande AGIEVISION 5 Dimensions (L x l x H) : 1940 x 2300 x 2600 mm Poids net : 3460 kg Fjdpfjxggdmjx Ahmsph La machine est nettoyée et remise à neuf suite à la commande. Vous bénéficiez d’une garantie de 6 mois sur toutes les pièces. Nous proposons également la mise en service et la formation sur demande.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Fedpfx Aev Hbygjhmjph Net weight: 3460 kg The machine has been cleaned, overhauled, and tested at our facility. We are happy to perform a customized test cut for you upon request. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, AGIECUT Classic 2S Year of manufacture: 2001 Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Fedpev Dkvrsfx Ahmjph With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon receipt of order. Afterwards, an acceptance test cut with optimal surface quality is performed. You will receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Leto izdelave: 2006, stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Fedpfx Ahsgfm Rrsmoph Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged operation with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand-held box for convenient setup Including AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Upon receipt of order, the machine will be cleaned, overhauled, and thoroughly tested by us. We will then commission the machine at your facility. You will receive a 6-month warranty on the machine. We are also pleased to offer the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, The GF AgieCharmilles CUT 30P from 2011 is a powerful and precise used wire EDM machine, specifically developed for demanding machining tasks in the metalworking industry. Leveraging state-of-the-art technology and intelligent control systems, the CUT 30P delivers outstanding cutting quality, low maintenance requirements, and excellent return on investment. Key Features & Benefits: ✅ Large Working Area: Workpiece dimensions: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1,000 kg Travel distances X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Taper cutting up to ± 25° / 80 mm ✅ High-Precision Machining: Positional accuracy with glass scales Automatic wire tensioning for consistently precise cutting results Surface finish up to Ra < 0.25 µm ✅ Efficient Wire System: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and re-threading 25 kg wire spool for extended operating times Fedsv S Ua Depfx Ahmsph ✅ Intelligent Control & User-Friendliness: Windows-based control system with intuitive user interface 15” LCD display for easy programming DXF import & 3D graphics check for precise simulation ✅ Reliability & Low Operating Costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust design and long-life wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – the perfect choice for precise and cost-effective wire EDM! 📌 Our used machine from 2011 is cleaned, overhauled, and extensively tested before sale to ensure top quality and reliability. 📩 Contact us for a personalized offer or to arrange a demonstration! We are also happy to offer commissioning and training on the machine.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 450 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Challenge 2 eCut Fpjdpexyxfpefx Ahmsh Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receiving the order. We are also pleased to offer commissioning and training services.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-Axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V Generator Fsdpfxjt I Dtnj Ahmoph Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, incl. KIT 50 option Incl. automatic wire changer (AWC) Submerged wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from two sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. glass scales for X and Y axes VISION 5 control system 15" LCD colour screen, short-stroke keyboard, and mouse Incl. Conic-Plus option for improved taper cutting Incl. Threading Expert Dimensions (L x W x H): 2095 x 1950 x 2232 mm Net weight: 3,600 kg The machine is completely overhauled and tested by us. A customised test cut is available on request. We also offer on-site commissioning and training for this machine.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Challenge V2 Year of manufacture: 2007 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Fodpfx Ahewqcm Ujmoph Includes AGIE universal clamping frame Includes AGIE JOGGER hand-held box Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. We are also happy to offer you commissioning and training services.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 3.000 kg, potovalna razdalja osi X: 800 mm, pomik osi Y: 550 mm, pomik po osi Z: 525 mm, GF AgieCharmilles Progress V4 Fodpewvqwrefx Ahmsph Year of manufacture: 2008 Travel ranges: X = 800 mm, Y = 550 mm, Z = 525 mm Travel ranges: U = 800 mm, V = 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3,000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and automatic re-threading after wire breakage With automatic front door Incl. AGIEJOGGER hand-held unit for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 2,900 x 3,050 x 2,850 mm Net weight: 6,000 kg The machine will be cleaned and fully overhauled in our facility upon receipt of order. You will receive a 6-month warranty on all machine components. We are also happy to offer commissioning and training services.

Stanje: rabljeno, The offer includes: - Stitch wire monitoring for 2 stitch heads Horizon stitch wire monitor Function: prevents the stitching wire from being completely used up, avoiding the need to re-thread new wire into the stitch head Fjdpfx Ahju Srv Homjph - Compatible with: Horizon SPF-200A

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 5.900 h, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, Wire diameter 0.1–0.3 mm Automatic re-threading Fodpfewzyr Aex Ahmoph Water bath Operating hours 5900 h Travel paths X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year of manufacture 2008

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, skupna višina: 870 mm, skupna dolžina: 2.190 mm, vhodna napetost: 230 V, Stapling machine with front trimming Foldnak 8 Paper format: min. 12x21 cm; max. 32.5x45 cm (Trimmer: closed A6–A4) 2x Foldnak industrial stitching heads Trimmer with pressure rollers. Belt delivery. Speed: max. 2,000 staplings/h Dimensions: height x width x length (cm): 87 x 61 x (58+96+65)=219. Fodswpqvnspfx Ahmsph Total net weight: 270 kg In working condition, can be tested.

Stanje: rabljeno, Leto izdelave: 2004, Obdelovalna velikost 1.050 x 650 x 250 mm Maks. teža obdelovanca 400 (800) kg Krmiljenje Agievision AGIE Maks. koničnost 30° / 100mm Pomik - x 500 mm Fodpfx Ahjw Spa Nomjph Pomik - y 350 mm Pomik - z 426 mm Pomik U x V-os mm Hitri pomik X-os 3 m/min Hitri pomik Y-os 3 m/min Hitri pomik U-os 0,6 m/min Hitri pomik V-os 0,6 m/min Hitri pomik Z-os 0,6 m/min Premer žice 0,2...0,33 mm Skupna potrebna moč 12,1 kVA Teža stroja ca. 3,9 t Prostorska zahtevnost ca. 2,8 x 2,4 x 2,3 m Žični erozijski stroj AGIE - Agiecut Progress 3

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2012, Grundlegende Informationen: Steuerung: Siemens S7-400 Technische Details: bisher verarbeitetes Material: Stahldraht Anzahl Züge: 12 Technischer Zustand: Neue Elektrik im Jahr 2012 Einlaufdraht-Ø max: 4 mm Einlaufdraht-Ø min: 3 mm Fertigdraht-Ø max: 1,3 mm Fertigdraht-Ø min: 0,78 mm Einlaufdrahtfestigkeit max: 1225 N/mm² Fsdpfx Ahozb N Raomoph Anzahl Blöcke: 12 Block-Achse: vertikal Ziehscheiben-Ø: 450 mm Ziehstein-Dicke: 43 mm Ziehstein-Ø: 27 mm Wasserdruck: min. 2 bar Regelungsart zwischen Ziehscheiben: Tastrollen Luftdruck: 6 bar Ziehscheibenkühlung: Wasser Ziehsteinkühlung: Wasser Antriebsart: Drehstrommotor Hersteller Motor: SIEMENS Antriebsleistung: 22 kW Motorregler: Siemens Sinamics Betriebsspannung: 400 V Frequenz: 50 Hz Elektroschrank: vorhanden Richtwerkrand: vorhanden Produktionsrichtung: von links nach rechts Bestehend aus: KOCH Abwickler KOCH Tänzer KOCH KHS 800 S Einzelspuler