Žice Glavnik nakup rabljenega (3.485)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has been cleaned, overhauled, and tested at our facility. We are happy to perform a customized test cut for you upon request. A 6-month warranty on all machine parts is included. Commissioning and training can also be offered upon request. Kdjdpov Hbygsfx Agkow

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 1.500 kg, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 260 mm, skupna višina: 2.350 mm, skupna dolžina: 2.500 mm, skupna širina: 2.300 mm, višina obdelovanca (maks.): 260 mm, širina obdelovanca (maks.): 650 mm, dolžina obdelovanca (maks.): 940 mm, skupna masa: 6.000 kg, CNC wire-cut EDM machine in very good condition. Fully inspected by Makino service technicians. The machine has been cleaned, and all pumps have been checked, fitted with new bearings, and sealed. Kdjdpfx Ajwww Nqogksw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 55DM2758, TECHNICAL DETAILS Travel paths X / Y / Z: 600 / 400 / 300 mm Cutting capability: H/W 30°/45° (30/45° instead of 15° for 0.25-mm wire) CNC control: MITSUBISHI M700 Control software: MITSUBISHI ELECTRIC "ADVANCE Plus" Replacement of X and Y linear encoders: November 2022 MACHINE DETAILS Total weight: 3,500 kg Overall length: 2,687 mm Overall width: 3,030 mm Overall height: 2,150 mm Input voltage: 400 V Input current: 50 A Type of input current: Three-phase Input frequency: 50 Hz FEATURES - ODS optical drive system - Direct drive for X and Y axes - Scale/encoder on X and Y axes - Intelligent automatic wire feeding system (wire diameter 0.1–0.3 mm) - Wire straightening system - Automatic wire cutter (for thicker wires) - Automatic hole location feature - 3D CAD/CAM control - 5 controlled axes + preparation for additional axes - PFC Precision Machining (Precise Finish Circuit) - LLS Longevity System - 10-kg wire spool holder (reel) - U-shaped, hardened, segmented worktable - Compressor dielectric (water cooling) - Prepared for remote communication (mcAnywhere) - CE version - Clear display of main functions on the screen - Programming via ESPERADVANCE dialogue system - Control system prepared for importing 3D files - Graphical inspection: 3D, front view, side view, top view - Handheld operating device Kjdpfxswr Acle Agkjdw - Ethernet TCP/IP and 2 USB ports - Prepared for remote communication (mcAnywhere)

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Also suitable for processing flat steel, including documentation, without accessories. The machine has seen little use. Kdjdohhnyfopfx Agkow

Stanje: dober (rabljeno), Leto izdelave: 2001,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Travels: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Water bath incl. chiller Automatic wire threading Kdsdjm Uyuxepfx Agkjw

Leto izdelave: 2007, Stanje: generalkompletno obnovljen (rabljeno), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (non-submerged) Achievable surface quality: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy machine setup Ksdpfx Agjmmfwuokedw AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility upon order placement. A 6-month warranty is provided on all machine components. Commissioning and training services are available upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P0050I553, teža obdelovanca (maks.): 500 kg, potovalna razdalja osi X: 320 mm, pomik osi Y: 220 mm, pomik po osi Z: 180 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid constitutes a binding commitment to collect the item no later than 31/03/2025. TECHNICAL DETAILS Max. workpiece weight: 500 kg Travel ranges X-axis: 320 mm Y-axis: 220 mm U-axis: 120 mm V-axis: 120 mm Z-axis: 180 mm Rapid traverse speeds X-axis: 900 mm/min Y-axis: 900 mm/min U-axis: 450 mm/min V-axis: 450 mm/min Kedev Iazljpfx Agkedw Z-axis: 900 mm/min MACHINE DETAILS Machine weight: 1.2 t Connected load: 13 kVA EQUIPMENT - Water bath machine - Automatic wire feeder - Various spare and wear parts

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 537 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 500 kg, potovalna razdalja osi X: 650 mm, pomik po osi Z: 200 mm, skupna višina: 2.215 mm, skupna dolžina: 2.820 mm, skupna širina: 1.700 mm, Premer žice (maks.): 0,2 mm, višina obdelovanca (maks.): 510 mm, širina obdelovanca (maks.): 510 mm, dolžina obdelovanca (maks.): 510 mm, vrsta vhodnega toka: trifazni, skupna masa: 3.220 kg, lastna masa: 3.320 kg, dolžina podajanja os X: 650 mm, dolžina podajanja os Z: 200 mm, hitrost pomika os X: 240 m/min, hitrost podajanja os Z: 240 m/min, obremenitev mize: 500 kg, vhodna napetost: 400 V, delovno območje: 510 mm, hitro pomikanje X-os: 20 m/min, hitri pomik na osi Z: 20 m/min, kapaciteta rezervoarja: 930 l, hitrost rezanja: 240 mm/min, največja hitrost vožnje: 240 mm/min, vhodna frekvenca: 50 Hz, vhodni tok: 11 A, Oprema: dokumentacija / priročnik, 2021 Agie Charmilles CUT AM 500 Žična elektroerozijska (Wire EDM) stroj Odkrijte vrhunsko švicarsko natančnost s tem CNC žičnim EDM strojem Agie Charmilles CUT AM 500, letnik 2021. Ta visokozmogljivi žični EDM stroj ima le 537 erozijskih ur in prihaja iz proizvodnje medicinskih naprav, kar zagotavlja skrbno vzdrževanje in minimalno obrabo. Idealno za visoko natančno obdelavo v medicini, letalstvu, avtomobilski in orodjarski industriji. Pregled stroja Znamka/model: Agie Charmilles CUT AM 500 Tip stroja: CNC žični EDM stroj Letnik: 2021 Kdsdpfx Agextfwxokow Krmilni sistem: GF Control Erozijske ure: 537 h Stanje: Zelo dobro – pripravljen za takojšnje obratovanje Tehnične specifikacije Delovno območje Maks. dimenzije obdelovanca: 510 x 510 x 510 mm Maks. teža obdelovanca (osnova + deli): 500 kg Nivo dielektrika (min/max): 250–305 mm Zmogljivost Maks. hitrost obdelave: 240 mm²/min Hrapavost površine (Ra):

Leto izdelave: 2018, Stanje: novo, Load capacity: max. 1,000 kg Coil inner diameter: min. 400 mm Coil outer diameter: max. 1,100 mm Kdodpfx Asdx Ryyegksw Coil height: max. 800 mm

Stanje: rabljeno, Leto izdelave: 2005,

Leto izdelave: 2000, Stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge 3 Travel distances: X = 500 mm, Y = 350 mm, Z = 256 mm U/V axis travel distances: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.3 μm Mean contour tolerance Tkm +/- 5 μm Available wire diameters: 0.20 – 0.33 mm Submerged operation with automatic wire threading With automatic, drop-down work tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient setup Including AGIESETUP 3D AGIEVISION control system AGIE HSS generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Including 6-month warranty. Ksdpfx Agofdl N Iskjdw Commissioning and on-site training can be provided upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, AGIECUT Classic 2S Year of manufacture: 2001 Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Kdedev Dkvrepfx Agkew Including AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon receipt of order. Afterwards, an acceptance test cut with optimal surface quality is performed. You will receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, The GF AgieCharmilles CUT 30P from 2011 is a powerful and precise used wire EDM machine, specifically developed for demanding machining tasks in the metalworking industry. Leveraging state-of-the-art technology and intelligent control systems, the CUT 30P delivers outstanding cutting quality, low maintenance requirements, and excellent return on investment. Key Features & Benefits: ✅ Large Working Area: Workpiece dimensions: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1,000 kg Travel distances X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Taper cutting up to ± 25° / 80 mm ✅ High-Precision Machining: Positional accuracy with glass scales Automatic wire tensioning for consistently precise cutting results Surface finish up to Ra < 0.25 µm ✅ Efficient Wire System: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and re-threading 25 kg wire spool for extended operating times ✅ Intelligent Control & User-Friendliness: Kdedpfxjv S Ua De Agksw Windows-based control system with intuitive user interface 15” LCD display for easy programming DXF import & 3D graphics check for precise simulation ✅ Reliability & Low Operating Costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust design and long-life wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT 30P – the perfect choice for precise and cost-effective wire EDM! 📌 Our used machine from 2011 is cleaned, overhauled, and extensively tested before sale to ensure top quality and reliability. 📩 Contact us for a personalized offer or to arrange a demonstration! We are also happy to offer commissioning and training on the machine.

Leto izdelave: 2006, Stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged operation with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand-held box for convenient setup Including AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Kdsdjgfm Rrjpfx Agkow Upon receipt of order, the machine will be cleaned, overhauled, and thoroughly tested by us. We will then commission the machine at your facility. You will receive a 6-month warranty on the machine. We are also pleased to offer the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, AGIECUT Progress V2 Year of manufacture: 2009 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Kedpfxjvax Ius Agksdw Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled after order confirmation. A test cut with optimum surface finish is performed for final acceptance. You will receive a 6-month warranty on the machine. Commissioning and on-site training are also available upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Kdodpfx Aswprq Tsgkow Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient set-up Incl. AGIESETUP 3D Incl. automatic wire changer AWC (for use with 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Upon receipt of order, the machine is completely cleaned, overhauled and thoroughly tested. A laser measurement of the axes is performed at our facility. We are also happy to carry out an individual test on the CUT 3000 for you. Including user training at Techma on your overhauled machine We also offer the following options: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 2000 Year of manufacture: 2012 Equipped with AWC (Automatic Wire Changer) for the use of two different wire diameters Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm Kjdpsv I T Dgjfx Agksdw U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm Submerged machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. glass scales for X and Y axes VISION 5 control 15" LCD color monitor, handy keyboard, and mouse Dimensions (L x W x H): 2095 x 1950 x 2232 mm Net weight: 3600 kg Includes 6 months warranty The machine is fully refurbished and tested by us. A customized test cut is possible upon request. We also offer on-site commissioning and training for this machine.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Kdodpfx Agjrzt Rwskjw Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receiving the order. We are also pleased to offer commissioning and training services.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles Progress VP2 Year of manufacture: 2018 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Ksdpfx Agswcmcwjkodw Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG-V generator with power module AGIEVISION 5 CNC control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon order receipt. Afterwards, a test cut is performed with the best surface quality for acceptance. You will receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, AGIECUT Excellence 3 Year of manufacture: 2003 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D Kjdpfxsrr Uzwo Agksdw AGIEVISION control system AGIE IPG generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Including operator training at Techma on your overhauled machine Optional: Transport, commissioning, chiller

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Challenge V2 Year of manufacture: 2007 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Kdedpfx Ajwqcm Uogkew Includes AGIE universal clamping frame Includes AGIE JOGGER hand-held box Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. We are also happy to offer you commissioning and training services.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 400 Sp Year of manufacture: 2013 Control system: HMI 1 Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Maximum taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Kodpfowmmvlsx Agkodw Maximum workpiece weight: 3000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg (K250) Overall dimensions of the complete unit: 2670 x 2870 x 2645 mm Total weight of the unit: 6300 kg The machine is in stock at our warehouse. Upon receipt of order, it will be cleaned, completely overhauled, and fully tested for all functions. Optional: - Commissioning of the machine at your facility - On-site training - Cooling unit - Transport - Clamping bar set

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 426 mm, model krmilnika: AGIEVISION 5, The seller provides a 6-month warranty on all machine components. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 426 mm Travel U/V-axis: ± 70 mm Machining Performance Max. taper: 30° at 100 mm height Max. cutting speed: 500 mm²/min Achievable surface finish: Ra: 0.20 µm Available wire diameters: 0.15 – 0.33 mm Workpiece Data Max. workpiece dimensions: 1,050 x 650 x 420 mm Max. workpiece weight (in water bath): 400 kg Max. workpiece weight (without water bath): 800 kg Generator & Control Generator: AGIE IPG-V Control: AGIEVISION 5 MACHINE DETAILS Dimensions (L x W x H): 1,940 x 2,300 x 2,600 mm Net weight: 3,460 kg EQUIPMENT - Submerged machine with automatic wire threading - Automatic re-threading after wire breakage - AGIEJOGGER hand-held unit for convenient setup Kdsdswh Sglspfx Agkjw

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 935089, - Water bath machine with automatic wire threading - Enclosed diamond wire guides for various wire diameters - Collision protection on all 5 axes (ICP) - Pictured clamping accessories included in the scope of delivery Kdsdpfolru Rbex Agksw TECHNICAL DETAILS Travel paths X / Y / Z: 550 / 350 / 400 mm Travel paths U/V axis: 550 / 350 mm Taper capacity: max. +/- 30° at 400 mm height Workpiece dimensions: max. 1200 x 700 x 400 mm Opening width: 1020 mm (accessible from one side) Workpiece weight: max. 1500 kg Surface finish: max. Ra 0.22 μm Cutting speed: max. 300 sq mm/min Available wire diameters: 0.15 – 0.30 mm Control: Charmilles Millenium with Windows operating system (12” TFT touchscreen) MACHINE DETAILS Dimensions (L x W x H): 2600 x 2810 x 2240 mm Net weight: 3300 kg Connection voltage: 400 V / 3-phase / 50/60 Hz Connected load: 10 kVA LAN connection: included, for network integration