Stroj za struženje z več vreteni

MORI SEIKI NZ2000

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, obratovalne ure: 1.800 h, Funkcionalnost: popolnoma funkcionalen, * Mori Seiki NZ 2000 T2Y * Estimated Equipment Value: 40,000–45,000 euros * Both spindles equipped with two high-precision Hainbuch collet chucks * Opposed headstock machine * 9-axis CNC turning and milling centre * Twin spindles * Headstock size: A2-6 * 2 superimposed turrets * 2 C-axes * 1 Y-axis * Two integrated 22 kW motors * Milling spindle power: 7.5 kW * Two Renishaw automatic tool setting arms * Conversational automatic programming system Mapps 4 * Automatic load control and tool consumption monitoring * Tool life management and consumption monitor * Double foot pedal for chuck opening and closing Fgjdox Ab Niepfx Aa Hek * Oil cooler for both spindles * 340 Nm cutting torque * Both turrets with 16 stations each, all live tooled * Up to 32 tools configurable per turret * Interface for bar feeder installation * Automatic rear parts catcher with special gripper for long parts * Large set of external and internal tool holders * Large set of axial and radial live tool blocks * MQ system for tool clamping * Maximum turning diameter: 320 mm * Turning length: 810 mm * Mori Seiki MSX-701 III control * Maximum distance between main spindle and sub-spindle: 1130 mm * Main spindle speed: 5000 rpm * Sub-spindle speed: 5000 rpm * Live tooling speed: 6000 rpm * Maximum bar capacity: 65 mm * X1 travel: 210 mm * Y1 travel: +65 / -45 mm * Z1 travel: 300 mm * X2 travel: 210 mm * Z2 travel: 810 mm * Sub-spindle travel: 920 mm * Rapid traverse X1, X2: 30,000 mm/min * Rapid traverse Y1: 20,000 mm/min * Rapid traverse Z1, Z2: 50,000 mm/min * C-axis resolution: 0.001° * Hinged type side chip conveyor * Communications: USB port, PCMCIA card, and RS232 * Machine weight: 8,300 kg * Machine can be inspected in operation * Electrical transformer, documentation, parts list, electrical diagrams, programming, and operation manual included * IMPORTANT: Never used with bar feeder, only for aluminium prototype machining * VERY few cutting hours * Immediate delivery unless pre-sold

Leto izdelave: 2008, Stanje: generalkompletno obnovljen (rabljeno), Oszillierende Grundplatte: 800 mm Oszillierender Querschlitten: 800 mm Maximaler Abstand zwischen den großen Spindelnasen: 1.130 mm Maximaler Bearbeitungsdurchmesser: 320 mm Fodpfx Aexuguuea Hjgk Maximale Drehbearbeitungslänge: 810 mm Stangendurchlass: 52 mm X1-, X2-Achse: 210 mm Y1-Achse: 110 mm (+65, -45) Y2-Achse: 110 mm (+45, -65) Z1-, Z2-Achse: 810 mm B-Achse (Spindel 2): 920 mm CNC-Steuerung: MSX-701 III Spindel 1, 2 Max. Spindeldrehzahl 1, 2: 6.000 1/min Spindelnase 1, 2: JIS A2-5 Spindeldurchgang 1, 2: 61 mm Revolverkopf: 16 Stationen x 2 Max. Werkzeugspindeldrehzahl motorisiert: 6.000 1/min Verfahrgeschwindigkeit X1, X2: 30.000 mm/min Verfahrgeschwindigkeit Y1: 20.000 mm/min Verfahrgeschwindigkeit Z1, Z2: 50.000 mm/min

Stanje: rabljeno, Leto izdelave: 2011, Maximum turning diameter: 320 mm Maximum turning length: 810 mm Control: MSX-701 IV Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Distance between centers: 1,130 mm Maximum spindle speed: 5,000 rpm Main spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Maximum spindle speed: 5,000 rpm Sub-spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed - driven tools: 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed - driven tools: 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm Sub-spindle traverse B: 870 mm Rapid traverse (X/Y/Z) 1: 30 / 20 / 50 m/min Rapid traverse (X/Y/Z) 2: 30 / - / 50 m/min Feedrate: 0 - 5,000 mm/min Total power requirement: 94 kVA Machine weight approx.: 8.3 t Space requirement approx.: 10.0 x 3.0 x 2.5 m CNC Turning and Milling Center MORI SEIKI - NZ 2000 T2Y Fgsdpfxjv E R E Nj Aa Hsk - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Fgjdpowlvlgjfx Aa Hok Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 1 kos rabljeni CNC stružnica Mori Seiki NZ 2000 s C-osjo in gnanimi orodji. Nadaljnji tehnični podatki in fotografije bodo dodani. Fgodpfxexb T Uzs Aa Hek