CNC stružnica s proti-vretenom

Mori Seiki NZ 2000 T2Y

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 1.800 h, Funkcionalnost: popolnoma funkcionalen, * Mori Seiki NZ 2000 T2Y. * APPROXIMATE VALUE OF INCLUDED EQUIPMENT: 40,000–45,000 EUR. * Both spindles equipped with two high-precision Hainbuch collet chucks. * Facing headstock machine configuration. * 9-axis turning and milling center. * Twin spindles. * Spindle nose size: A2-6. Lhjdpfx Acjxu Rrqs Djp * 2 superimposed turrets. * 2 C-axes. * 1 Y-axis. * Two integrated motors, 22 kW. * Milling motor power: 7.5 kW. * Two Renishaw automatic tool measurement arms. * MAPPS 4 conversational automatic programming system. * Automatic force control and tool consumption monitor. * Tool life management and consumption monitor. * Dual pedal for chuck open/close. * Oil chiller for both spindles. * 340 Nm cutting torque. * Both turrets: 16 stations each, all motorised. * Capability for setup with 32 tools per turret. * Interface for bar feeder installation. * Rear automatic part catcher with special gripper for long parts. * Large lot of external and internal tool holders. * Large lot of axial and radial driven tool blocks. * MQ system for tool clamping. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance main spindle to sub-spindle: 1,130 mm. * Main spindle speed: 5,000 rpm. * Sub-spindle speed: 5,000 rpm. * Driven tool speed: 6,000 rpm. * Max. bar capacity: 65 mm. * X1 travel: 210 mm. * Y1 travel: +65 / -45 mm. * Z1 travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Sub-spindle traverse: 920 mm. * Rapid traverse (X1, X2): 30,000 mm/min. * Rapid traverse (Y1): 20,000 mm/min. * Rapid traverse (Z1, Z2): 50,000 mm/min. * C-axis resolution: 0.001°. * Side hinged belt chip conveyor. * Communication ports: USB, PCMCIA card and RS232. * Machine weight: 8,300 kg. * Machine available for inspection under power. * Electrical transformer, documentation, parts list, electrical diagrams, programming and operating manuals included. * IMPORTANT: Never used with a bar feeder, only for aluminum prototype machining. * VERY few cutting hours. * Immediate delivery unless sold.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 5-Axis CNC Machining Center Year: 2006 Control: Heidenhain iTNC 530 Lsdswn A Slspfx Ac Djhp Technical specifications: X-axis travel: 880 mm y-axis travel: 630 mm z-axis travel: 630 mm Max. torque: 130 Nm Tool holder: SK 40 (ISO 7388IIB) Tiltable axis B: 103° Working table: Clamping surface: 1,250 x 700 mm Rotary table diameter: 700 mm Rotatable axis C: 360° Max. table load: approx. 500 kg T-slots: 11x 14 mm x 63 mm Tool magazine: Number of tool stations: 32 (2x 16) positions Tool holder: SK 40 (ISO 7388IIB) Max. tool diameter: 80 / 130 mm Max. tool diameter with adjacent stations free: 160 mm Max. tool length: 315 mm Max. tool weight: 8.0 kg

Stanje: rabljeno, Leto izdelave: 2011, Maximum turning diameter: 320 mm Maximum turning length: 810 mm Control: MSX-701 IV Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Distance between centers: 1,130 mm Lhsdpsv E R E Njfx Ac Dop Maximum spindle speed: 5,000 rpm Main spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Maximum spindle speed: 5,000 rpm Sub-spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed - driven tools: 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed - driven tools: 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm Sub-spindle traverse B: 870 mm Rapid traverse (X/Y/Z) 1: 30 / 20 / 50 m/min Rapid traverse (X/Y/Z) 2: 30 / - / 50 m/min Feedrate: 0 - 5,000 mm/min Total power requirement: 94 kVA Machine weight approx.: 8.3 t Space requirement approx.: 10.0 x 3.0 x 2.5 m CNC Turning and Milling Center MORI SEIKI - NZ 2000 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Lhsdpfewlvlgjx Ac Djp Year of manufacture: 2010

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis mm: 260 mm - Z Axis mm: 590 mm - Y Axis mm: +/- 50 mm - Maximum Turning Diameter mm: 356 - C Axis Increment: 0.001 - Maximum Turning Length: - Rapid Traverse Rate mm/min X, Z, Y: - Swing Over Bed mm: - Swing Over Cross Slide mm: - Bar Capacity mm: Ø 65 (main) - Max. Rapid Traverse m/min X, Z: - Main Spindle 12” - Spindle Speed rpm: 5,000 rpm Lodpfx Aewdrfgjc Dshp - Spindle Power kW: 18.5 kW - Torque Nm: - Main Spindle Bore mm: - Main Spindle Nose: A2-6 - Sub-Spindle: - Sub-Spindle Speed rpm: 6,000 rpm - Sub-Spindle Power kW: 11 kW - Torque Nm: - Sub-Spindle Bore mm: - Sub-Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed rpm: 6,000 rpm - Driven Tool Power kW: 5.5 EQUIPMENT: - Chip conveyor - 3-colour status lamp - Fixed tool holders - Parts catcher MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Stanje: rabljeno, Leto izdelave: 1981, Premer čelne plošče: 3200 mm Premer rotacije: 5100 mm Višina struženja: 2505 mm Prečni most – nastavitev: 1500 mm Največji hod batnice: 1250 mm Hod suportne enote: 2000 mm Krmiljenje: Siemens 8 T Lhsdpfou Sbdgsx Ac Dsp Menjalnik orodja: 16 kos Nosilnost mize: 60 t Območje vrtljajev čelne plošče – brezstopenjsko: 0,8–100 obr/min Pomik: 0,0 mm/min Hitri pomik: 6000 mm/min Moč glavnega pogona vretena: 75 kW Približna teža stroja: 70 t Prostorske zahteve: cca. 9,3 x 6,1 x 6,0 m Stroj je v odličnem stanju!! Stroj je lahko po želji opremljen tudi z novo električno opremo vključno s CNC krmiljenjem Siemens SINUMERIK 840D sl. Predelavo izvaja strokovno podjetje, 12 mesecev garancije na dele in 6 mesecev servisiranja osebja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Vertical turning lathe – double column with 5 controlled axes – Manufacturer: CKD Blansko / Type: SKD / Year of manufacture: 2008 Refurbishment and overhaul works were carried out in 2019 (completed January 2020); further works were carried out and followed ... The machine can be inspected under power by appointment. TECHNICAL SPECIFICATIONS: Working range: - Table diameter: 4,000 mm - Maximum swing diameter: 5,000 mm - Maximum workpiece height: 2,500 mm - Maximum table load: 50 t C-axis: - C-axis speed: 0.01 – 2 rpm - Maximum torque at table: 35,000 Nm Machine: - Total power requirement: 160 kVA - Machine weight: approx. 74 t EQUIPMENT: - Control: SIEMENS SINUMERIK 840D - Automatic tool changer - Pick-up magazine: 1 angular head - Angle milling head Lhjdpfxeww H Ivj Ac Djp - Oil coolant device - Coolant system with paper filter - AC drive for rotary tools - AC drives for X/Z/C/U/W axes - Fully enclosed guarding - 2-segment circular chip conveyor around the table - Hinged belt conveyor - Documentation - CE marking No guarantee for completeness or accuracy of the technical details or equipment. Subject to prior sale. Detailed technical datasheet and further equipment information available on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Commissioning: 2013 Control system: Heidenhain iTNC 530 incl. HR 520 handwheel Machine hours Machine powered on: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours current milling spindle: approx. 150 h Travel distances X axis: approx. 2,500 mm Y axis: approx. 3,000 mm Z axis: approx. 1,250 mm A axis: ± 110° C axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives linear axes Feed rate X/Y/Z axis: up to 60 m/min Axis acceleration X/Y/Z: up to 5 m/s² The machine is currently set to the following basic values due to insufficient available power on site! Feed rate X/Y axis: up to 40 m/min Feed rate Z axis: up to 30 m/min Lhsdpjwa T Hkofx Ac Dop Axis acceleration X/Y/Z: up to 2.5 m/s² Electrical data Connected load: 190 kVa Main fuse: approx. 315 A The machine can be reset to its original values at any time, provided sufficient power supply is available. Current reduced connection values: Connected load: 130 kVa Main fuse: approx. 250 A Dimensions, weight Required space for machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment: - Coolant supply with belt filter system - 50-position chain tool changer - Work area enclosure - Chip conveyor - LTA emulsion mist extraction system Options available at extra cost: - Renishaw RMP60 radio probing system - BLUM Control NT Condition of the machine Fully functional, in very good condition. Already dismantled and stored.

Stanje: dober (rabljeno), Maks. premer: 560 mm Lhodpjv Dvzyefx Ac Dop Delovna dolžina: 3550 mm Maks. dolžina obdelovanca: 4000 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Control system: GE FANUC 21i-TB Swing diameter: 533 mm Turning diameter: 340 mm Turning length: 355 mm X-axis travel: 209 mm Z-axis travel: 355 mm Spindle bore: Ø50.8 mm Spindle speed: 5,000 rpm Chuck max. Ø200 mm Turret: 12-station Rapid traverse: 30 m/min Lhsdovw Uqaopfx Ac Djp Drive power: 11 kW Spindle nose: A2-6 Tool holder: VDI30 C-axis: 0.001° (programmable) Dimensions (LxWxH): 2300 x 1700 x 1700 mm Weight: approx. 3,000 kg Equipment & Accessories: - Hydraulic chuck - Short bar loader EMT Super 80 - Manual Guide in FANUC software - Driven tool turret and C-axis - Tailstock - Parts catcher - Manuals Very good condition. The machine operates accurately.