CNC center za struženje in rezkanje

MORI SEIKI NZ 2000 T2Y2

Leto izdelave: 2009, Stanje: pripravljen za uporabo (rabljen), Ponujamo dvovretenski stružni center v izvedbi T2Y2. Območje dela (premer struženja/dolžina struženja/premer preboja palice maks.): 320mm/810mm/65mm, hitrost vrtenja glavnega in nasprotnega vretena: do 5000 vrt/min, revolver za orodja: 2x16 postaj, krmiljenje: MSX-701-III, postavitvene mere d/š/v: pribl. 3950mm/2200mm/2350mm, teža stroja: pribl. 8300kg. Ogled je mogoč po dogovoru. Hsdpfx Agsyln Dae Tsi

Stanje: rabljeno, Leto izdelave: 2021, HAAS MINIMILL 2 Leto izdelave: 2021 Hjdpfxeyaqtao Ag Tei Velikost mize: 1016 mm x 356 mm Pomik osi X: 508 mm Pomik osi Y: 406 mm Pomik osi Z: 356 mm Vreteno: SK40 Hitrost vretena: 0-6000 o/min 2x Renishaw sonda Orodni magazin: 20 orodij Približna masa: 2313 kg

Stanje: rabljeno, Leto izdelave: 2011, Maximum turning diameter: 320 mm Maximum turning length: 810 mm Control: MSX-701 IV Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Distance between centers: 1,130 mm Maximum spindle speed: 5,000 rpm Main spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Maximum spindle speed: 5,000 rpm Sub-spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Number of tool stations: 16 positions Hedpfx Aov E R E Neg Tji Number of driven tool stations: 16 positions Max. speed - driven tools: 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed - driven tools: 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm Sub-spindle traverse B: 870 mm Rapid traverse (X/Y/Z) 1: 30 / 20 / 50 m/min Rapid traverse (X/Y/Z) 2: 30 / - / 50 m/min Feedrate: 0 - 5,000 mm/min Total power requirement: 94 kVA Machine weight approx.: 8.3 t Space requirement approx.: 10.0 x 3.0 x 2.5 m CNC Turning and Milling Center MORI SEIKI - NZ 2000 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, CNC SMOOTH G, hodi 730 x 730 x 730 mm, 2 paleti 500 x 500 mm, hitrost vretena 18000 obr/min, magazin za 120 orodij, max. premer kosa 800 x 1000 mm, hitri pomiki 60 m/min, centralno hlajenje 15 barov, priprava za RENISHAW, rotacijska miza CNC s 360 pozicijami, transporter CONCEP. Hodpfx Agexcvycs Tei

Stanje: rabljeno, Leto izdelave: 2004, Technical Details: Faceplate diameter: 4,770 mm Swing diameter: 7,000 mm Turning height: 1,000 mm Ram stroke: 1,000 mm Max. workpiece weight: 100,000 kg Hedpfevb Hlwex Ag Toi Faceplate speed range: 2 – 20 rpm Feed rate: 1 – 10,000 mm/min Rapid traverse: 10 m/min Ram dimensions: 250 x 250 mm Main motor: 100 kW Total power requirement: 200 kW Equipped with CNC SIEMENS 840 D 2 vertical supports with 12-position tool changers C-axis with driven tools, SK 50, 37 kW, 3,000 rpm Chip conveyor and coolant system

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter 300 mm Swing diameter over bed 430 mm Swing diameter over cross slide 300 mm Control SIEMENS, SINUMERIK 840 D Travel path - X 160 mm Travel path - Z 510 mm Maximum workpiece length 480 mm Main spindle bore 53 mm Main spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Hodpfxewx R Rke Ag Toi Main spindle motor 15 kW Sub-spindle bore 53 mm Sub-spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Sub-spindle motor 15 kW C-axis resolution 0.001° C-axis rapid traverse 1000 rpm Tool turret 1 x 12 stations Number of driven tool stations 12 Tool holder shank (DIN 69880) VDI 25 Speed of driven tools 0 - 8000 rpm Torque 16 Nm Power 4 kW Feed force X/Z-axis 4000 / 6000 N Rapid traverse X-axis 24 m/min Rapid traverse Z-axis 30 m/min Total power requirement 38 kVA Machine weight approx. 4 t Machine dimensions L x W x H 2.65 x 1.84 x 2.32 m Accessories: Collet chuck 173 E on main spindle, Collet chuck 163 E on sub-spindle, Bar loader manufacturer FMB, type turbo 3-36/3200 A, Year 2018 for bar diameters up to 36 mm and bar lengths up to 3200 mm Various tool holders for turret (no driven holders), Coolant system

Stanje: dober (rabljeno), Leto izdelave: 2023,

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts Hsdpfx Ageu Aa I Ss Tsi – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 5.991 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11415584024, For sale is a 5-axis CNC machining center DMG MORI DMU 50, year of manufacture 2012, equipped with a Siemens control system. The machine is in good, well-maintained condition and was in operation until recently. An on-site inspection under power is possible by appointment at any time. The DMU 50 is a vertical machining center with an integrated NC rotary/swivel table, making it ideal for precise 5-axis complete machining of complex workpieces. Typical applications include tool and mold making, manufacturing of precision components, as well as prototypes and small to medium production runs. Technical data (extract): Manufacturer: DMG MORI / Deckel Maho Model: DMU 50 Machine type: Vertical 5-axis CNC machining center Year of manufacture: 2012 Control system: Siemens Number of axes: 5 simultaneous X travel: approx. 500 mm Y travel: approx. 450 mm Z travel: approx. 400 mm Spindle: Vertical motor spindle, up to approx. 14,000 rpm Tool changer: automatic, approx. 30 tool stations Country of origin: Germany Hsdpfx Ajx S D N Tog Toi Worktable Simultaneous-capable rotary tilt table Control 3D control Siemens 840D solutionline Main drive Spindle speed up to 14,000 rpm SK40 Tool magazine Tool magazine 60 stations, SK40 vertical chain Automation / Measuring / Monitoring Infrared probe TS649 DMG Direct measuring systems X/Y/Z Cooling / Chip removal Coolant-air switch-over Rinsing gun for chip cleaning Siemens Control Options Electronic handwheel General Options Mode 4 operation Second cabin door Special constructions Rotating viewing window (S-K3008) Operating hours (according to meter): Machine hours: approx. 31,987 h Spindle hours: approx. 10,489 h Condition & Scope of delivery: Used, fully functional, regularly in operation. Scope of delivery includes the machine as shown, further accessories by arrangement. Miscellaneous: Location: Birkenfeld (75217)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, CNC stružnica z 2 osmi DMC Korea DL22 Fanuc OiTD z Manual Guide in USB priključkom Letnik proizvodnje: 2012 8-palčna vpenjalna glava Prehod vretena: 65 mm Dolžina struženja: 400 mm Hsdpfxexyauls Ag Tji Glava za 12 orodij Konjiček Korito s črpalko za hladilno tekočino