Stroj za erodiranje žice

Mitsubishi FA 20 S

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06F2S765, teža obdelovanca (maks.): 1.500 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, The machine has been regularly serviced and is in good condition. Wear parts have been extensively replaced. The EDM machine has seen very little use over the past four years. Transport, installation, and operator training can be organized at an additional cost. Ffsdpjwtd Edofx Aflst

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. Ffjdpfxstyyn Hj Afljt 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible.

Stanje: rabljeno, Leto izdelave: 2012, Travel: X 500 mm Y 350 mm Z 300 mm Ffsdpfeuu Dl Rjx Afljt Submerged-type machine Automatic wire threading

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 used surface grinding machine Make: Elb Model: Smart NG STC Serial No.: 511210608 Control system: Siemens Simatic Multipanel Touch Ffjdpov T Rhaefx Afljt Magnetic chuck: 400 x 600 mm Hydraulic table drive, table speed 2 - 30 m/min Table load on magnetic plate: 400 kg Grinding area (L/W/H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 4.3 kW Grinding spindle taper: 36 mm Maximum vertical travel: 475 mm Maximum cross travel: 370 mm Machine weight: 3,800 kg Machine dimensions (L/W/H): 2,750 x 2,050 x 2,150 mm Electronic handwheel for Y/Z axis Dressing unit with compensation/diamond dresser, height adjustable by 22 mm Wet grinding system with coolant pump, 50 l, automatic paper band filter, 60 l Travel measurement in Y/Z axis via rotary encoder

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Fjdpfet Tqrnox Aflsft Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter

Stanje: rabljeno, Leto izdelave: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum speed: 8,000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 travel: 320 mm X1 travel: 50 mm Y1 travel: 255 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 25 mm Slide 1 Tool Mount: Tool positions Fixed, with tool shank 16 x 16 mm: 5 units Ffedpstzyx Tjfx Aflet Slide 2: X2 travel: 165 mm Z2 travel: 200 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 30 mm Slide 2 Tool Mount: Number of turret stations with integrated spindle: 8 units Number of axial live tools (integrated): 8 units Coolant tank, approx.: 400 l Coolant pump, max. capacity: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub-spindle - 2 double drill holders for rear machining support with cylinder - Sub-spindle parts ejector

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 500 mm, merilno območje os Z: 300 mm, Visio 500 optična/taktilna 3D merilna naprava 453 (400 X, 500 Y, 300 Z) pomično območje. Merilna programska oprema: PC-DMIS CAD verzija 2015 Menjalnik za sonde s 6 mesti, skupno z 2 moduli TESASTAR MP Silent PC Big Tower z Windows 7 (vse je nameščeno in deluje) Kamera z 200-kratnim optičnim zoomom z obročasto/koaksialno osvetlitvijo in prehodno svetlobo (diascopsko) Vse popolnoma deluje. Y-os ima rahle praske. So bile zbrušene. To ne vpliva na funkcionalnost ali natančnost. Ffodpfeiyymrsx Aflst

Leto izdelave: 2011, Stanje: delavnici obnovljeno (rabljeno), Boschert Tool Grinding Machine EASY SHARP Ffsdoid I T Ispfx Afljt Equipped for the Trumpf tool system (Amada system optional) Machine for punch tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Equipment for Trumpf tool system up to size III Accessories: Tool holder for flat and Whisper punches Die holders for sizes I, II and III New corundum grinding wheel Dressing diamond Overhauled cooling system and machine base frame Technical data: Grinding wheel diameter: 175 mm Height adjustment: 150 mm Working area: 400 x 150 mm Motor power: 2.2 kW Motor speed: 2,825 rpm Optional: adapters for Amada system available Pictures for reference only

Stanje: zelo dobro (rabljeno), Grinding range 650 x 300 x 550 mm Table size 650 x 250 mm Automatic dressing device Ffsdpfsrvhirox Afljt MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.160 mm, pomik osi Y: 762 mm, pomik po osi Z: 650 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 24 m/min, proizvajalec krmilnikov: FANUC, model krmilnika: FANUC 0i-MD, skupna višina: 3.170 mm, skupna dolžina: 5.500 mm, skupna širina: 2.892 mm, širina mize: 760 mm, dolžina mize: 2.160 mm, obremenitev mize: 1.800 kg, skupna masa: 15.000 kg, hitrost vretena (min.): 60 obr/min, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 20 letvica, razdalja od središča mize do nosu vretena: 800 mm, moč vretenovega motorja: 18 W, nos vretena: ISO 40, število vreten: 1, število mest v zalogovniku orodij: 40, dolžina orodja: 300 mm, premer orodja: 80 mm, teža orodja: 8 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Used vertical machining center “DOOSAN model DNM 750L-” with FANUC 0i-MD CNC Ffsdpfjw D Aynox Afljt