Stroj za erodiranje žice

Mitsubishi FA 20 S Advance

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06F2S765, teža obdelovanca (maks.): 1.500 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, The machine has been regularly serviced and is in good condition. Wear parts have been extensively replaced. The EDM machine has seen very little use over the past four years. Transport, installation, and operator training can be organized at an additional cost. Ffedewtd Edjpfx Aflst

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Grinding diameter: 80 - 250 mm Fedju D I Tlepfx Afloft Grinding length: 600 mm Centre height: 175 mm Longitudinal travel: 750 mm Workpiece speed: 6 - 600 rpm Grinding spindle speed: 1500 - 3600 rpm Cross travel - automatic and manual: 320 mm Control: Kelco 80 Total power requirement: kW Machine weight approx. 4.4 t Space requirements approx. 3.1 x 2.1 x 2.0 m

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Fedpjtyyn Hofx Afljft Documentation available. On-site inspection possible.

Stanje: zelo dobro (rabljeno), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer Model: 1624 Specifications: Spectral range: 1600-2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Stray light Ffsdpfx Asn Arm Toflst

Leto izdelave: 1990, Stanje: dober (rabljeno), CNC 4th Axis Make: NIKKEN Type: CNC-200 Year: 1990 with tailstock and base plate. Ffodpjgabu Uofx Aflet

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 used surface grinding machine Make: Elb Model: Smart NG STC Serial No.: 511210608 Control system: Siemens Simatic Multipanel Touch Magnetic chuck: 400 x 600 mm Hydraulic table drive, table speed 2 - 30 m/min Table load on magnetic plate: 400 kg Grinding area (L/W/H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 4.3 kW Grinding spindle taper: 36 mm Maximum vertical travel: 475 mm Maximum cross travel: 370 mm Machine weight: 3,800 kg Machine dimensions (L/W/H): 2,750 x 2,050 x 2,150 mm Electronic handwheel for Y/Z axis Dressing unit with compensation/diamond dresser, height adjustable by 22 mm Wet grinding system with coolant pump, 50 l, automatic paper band filter, 60 l Fodpov T Rhasfx Afljft Travel measurement in Y/Z axis via rotary encoder

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 610 mm, nazivna (navidezna) moč: 37 kVA, vrtilni moment: 236 Nm, proizvajalec krmilnikov: Heidenhain iTNC530, model krmilnika: iTNC530, širina mize: 700 mm, dolžina mize: 1.700 mm, obremenitev mize: 700 kg, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 9.000 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 16.580 h, moč vretenovega motorja: 37 W, število vreten: 1, število mest v zalogovniku orodij: 48, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3-axis CNC machining center, Heidenhain iTNC530 X-axis travel: 1500 mm Y-axis travel: 700 mm Z-axis travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Table load capacity: 700 kg Ffodpfovz Tyujx Aflet Through spindle coolant: 20 bar Chip conveyor Manual pulse generator (handwheel)

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Ffsdpjt Tqrnsfx Afljt Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 500 mm, merilno območje os Z: 300 mm, Visio 500 optična/taktilna 3D merilna naprava Fjdpfx Aoiyymrofljft 453 (400 X, 500 Y, 300 Z) pomično območje. Merilna programska oprema: PC-DMIS CAD verzija 2015 Menjalnik za sonde s 6 mesti, skupno z 2 moduli TESASTAR MP Silent PC Big Tower z Windows 7 (vse je nameščeno in deluje) Kamera z 200-kratnim optičnim zoomom z obročasto/koaksialno osvetlitvijo in prehodno svetlobo (diascopsko) Vse popolnoma deluje. Y-os ima rahle praske. So bile zbrušene. To ne vpliva na funkcionalnost ali natančnost.

Leto izdelave: 2011, Stanje: delavnici obnovljeno (rabljeno), Boschert Tool Grinding Machine EASY SHARP Equipped for the Trumpf tool system (Amada system optional) Machine for punch tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Used machine is currently being overhauled Equipment for Trumpf tool system up to size III Accessories: Tool holder for flat and Whisper punches Die holders for sizes I, II and III New corundum grinding wheel Dressing diamond Overhauled cooling system and machine base frame Technical data: Grinding wheel diameter: 175 mm Height adjustment: 150 mm Fedsid I T Iepfx Afljft Working area: 400 x 150 mm Motor power: 2.2 kW Motor speed: 2,825 rpm Optional: adapters for Amada system available Pictures for reference only