Missler okvirna žaga deb410ce 410

Missler deb410ce

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirements approx. 5.75 x 4.2 x 2.75 m Csdpfx Afjfg E Hnoqerk 2-column double mitre band saw designed for high-speed cutting with pusher system P15. Optionally with P30 Hydraulic lowering of the saw frame • NC controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved using the new "B&S positioning system". An intelligent NC control system ensures smooth interaction between the linear encoder and the self-braking positioning motor in combination with a reliable hydraulic brake by means of large-radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC control CNC control allows the programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side clamping positioning system The B&S pusher system – feed and positioning system – is equipped with "double-sided opening grippers" which are hydraulically operated. This guarantees safe gripping and transport of materials and bundles that deviate slightly from their ideal shape. The pusher system is independently mounted and guided via ball-bearing linear guides, precision ground rack, and a frequency-driven, robust gear motor.

Stanje: novo, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.8 t Dimensions L x W x H: 3.0 x 2.15 x 2.2 m SPECIAL PRICE!!!! Cjdefg E Hwepfx Afqsrk 2-column high-performance band saw machines of the SBS series The SBS series stands out thanks to advanced technology, high quality, durability, and an unrivalled, extensively equipped standard specification. - Modern SNC 20 control system for CNC models - Frequency-controlled saw drive - Operation buttons with pictograms - Work light - Driven chip brush - Hydraulic blade tensioning - Clamping pressure regulation - Double vice (in front of and behind the blade) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 control enables convenient and simple programming of up to 20 different sawing tasks (length and quantity). When entering the nominal dimension, the control system automatically calculates the cutting waste and number of feed strokes. Additionally, the error code display system allows for rapid troubleshooting and diagnostics.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. Crjdpfxofg E Hpj Afqek - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Crodofgyicjpfx Afqsk Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: dober (rabljeno), Spectro CIROS CCD Water Analysis Device - Height: 105 cm Csdpfx Afsfiqn Usqjrk - Width: 150 cm - Depth: 75 cm Good condition, fully functional. Can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid any misunderstandings, the item can be viewed and tested under power before purchase. If you have any questions, please ask them prior to purchasing to prevent any uncertainties. For general inquiries or to schedule a viewing appointment, I am always available at the phone number listed below. Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping via freight forwarder.

Stanje: novo, Number of positions: 77 Weight: 146 kg Condition: New Hole diameter: 28 mm Set 3: 77-piece, 28 mm system, consisting of: Clamps: 10 x 280610.N Clamps: 6 x 280630.N Prisms: 4 x 280648.1.N Pins: 24 x 160511 Magnetic pins: 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle brackets: 6 x 160110.N Angle brackets: 2 x 280152.N Angle brackets: 2 x 280162.N Crodpeupw Rvofx Afqok Angle bracket: 1 x 280166.N Angle bracket: 1 x 280167.N Accessory set: 1 x 283999 Price quoted exclusive of packaging and transport.

Stanje: novo, Leto izdelave: 2025, Patented mitre system Credoh S Nxpepfx Afqok Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Stanje: dober (rabljeno), We offer steel tanks for the storage of almost all common liquid media. We always have all available sizes from 1,000 litres to 100,000 litres in stock. Csdpfx Afogx E Uhoqork No matter how you want your tank to be equipped, we implement your requirements and comply with official regulations at fair prices. Whether it’s an internal lining, 2K epoxy coating, exterior paint, fitting installations or modifications, DEKRA inspection, loading, or transport – we are the right partner for you.

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m Csdpfxod Iipmj Afqjrk SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Stanje: zelo dobro (rabljeno), Wir bieten zum Verkauf folgende Gránit-Mill 90 Holzpelletpressen an, im auf den Bildern ersichtlichen Zustand, nach Stilllegung der Pelletieranlage. Die Maschinen wurden in Ungarn hergestellt. Unser Unternehmen pflegt eine ausgezeichnete Beziehung zum Hersteller und kann Sie beim Kauf von Ersatzteilen unterstützen. Antrieb und Etikettenzuführung ähneln denen der älteren CPM-Maschinen. Die Pressen (bei Verarbeitung von Kiefernholz) erreichen eine Kapazität von 1,2–1,5 t/h/Stk. Preis: €29.900 pro Presse €49.900 für 2 Pressen Im Preis inbegriffen: Vorratstank Steuerschrank Dosierschnecke Dauermagnet Konditionierer Presse Motoren Vorratstank 1,1 kW Beschicker 1,5 kW Konditionierer 15 kW Credpfxop T Twuj Afqjk Stofftransporteur 0,55 kW Hauptmotor 90 kW 3 Matrizen Alle drei Matrizen von La Meccanica, kaum gebraucht; Bohrungsgröße 6 x 45 mm für Kiefer. 2 Sätze (insgesamt 4) gezahnte Kollerringe Ersatzteile Schrauben Muttern Schersicherung Montagehilfen Zustand: Motoren und Antriebe einwandfrei. Beide Maschinen getestet. Beim rechten Gerät wird der Austausch des Halslagers empfohlen. Kleinere Bauteile (wie der Pelletschneider) sind zu ersetzen. Kein Wasseranschluss, jedoch vorbereitet. Abschmierung erfolgt manuell, nachrüstbare Zentralschmierung möglich. Fazit: Die linke Maschine ist sofort einsatzbereit. Die rechte benötigt einen kleinen Service. Eine Besichtigung bzw. ein Probelauf ist nach vorheriger Absprache möglich. Die Anlagen stehen nicht im Produktionsbetrieb und müssen vorbereitet werden. Vor Ort kann die mechanische Standfestigkeit sowie die Schüttdichte der produzierten Pellets geprüft werden!