Dolga tračna brusilka

MINIMAX SCM LS 300

Stanje: zelo dobro (rabljeno), Spodnja vretenasta rezkalka SCM T150 Premer vretena: 35 mm Skupna dolžina vretena: 180 mm Električni dvig vretena Električni pomik vodila Električno nastavljiv kot -10/45° Spremenljiva hitrost vretena: 3000-4500-6000–7000-10000 vrt/min Moč motorja: 5,5 kW Tehnična dokumentacija DTR Laodpfx Ajw Ral Hoamed

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Lodpfov Scrhjx Aamoad

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a rotary magazine table with a diameter of 750 mm for edge material from 0.4–3 mm, a GlueBox application unit, as well as top and bottom polishing units. The machine is equipped with an advanced x-motion Plus control system featuring a 15" SmartTouch display and a multifunctional milling unit for precise processing of plastic edges. Contact us for more information on this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Top and bottom polishing unit Machine advantages Technical machine benefits • Height adjustment for positioning of workpieces: 8–60 mm Laedpfx Aajx D Hbtsmod • Rotary magazine diameter: 750 mm for edge material 0.4–3 mm in rolls • Rotary magazine for edge material with ball bearings, plate diameter: 740 mm • GlueBox application unit • Milling unit with two motors: 0.35 kW (1 HP), 12,000 rpm, HW saw blades, Z 24, D-100x20x3.2 mm, pneumatically tiltable 0°–10° • Top and bottom multifunctional milling units // top and bottom profile sanding machine x-motion plus, for processing plastic edges of 2 and 3 mm • Motorized corner rounding unit with 2 motors, electronic adjustment for milling the front and rear edge profiles of the top/bottom edge for edge thickness of 0.4–3 mm and feed speeds up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed 12,000 rpm, 2x 1.5 kW • Edge and workpiece thickness measurement with Bluetooth technology Additional information Power supply: 3x400V 50/60Hz Chain feed with 2 speeds, feed rates: 10 and 18 m/min Control system: x-motion Plus control with 15" SmartTouch

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: KASTO Model: KASTOtec A3 Year of manufacture: 2001 Specifications Metric Sawing capacity round 90°: 330 mm Sawing capacity flat 90°: 330 x 330 mm Maximum sawing speed: 12 - 120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW Dimensions (approximate): - Length: 4600 mm - Width: 2150 mm - Height: 2310 mm Lodpju R R Acsfx Aamsad Weight: 4300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. Details are given in good faith but accuracy cannot be guaranteed. No representation or contractual terms are implied. We recommend verifying all critical details independently.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm - Liczba miejsc na narzędzia w magazynie: 8 - Stół maszyny: stół aluminiowy rastrowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Numer seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 – praktycznie nieużywany Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja bramy: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 roku – jedna ustawiona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h Interfejs do odczytu formatu CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Laedpfx Aouu Ntgoamod Automatyczny pomiar długości narzędzia

Stanje: rabljeno, Leto izdelave: 2013, Žične erozijske stroji / EDM Pomik X: 600 mm Pomik Y: 400 mm Pomik Z: 350 mm Maks. velikost obdelovanca X: 800 mm Maks. velikost obdelovanca Y: 570 mm Maks. velikost obdelovanca Z: 340 mm Maks. teža obdelovanca: 1000 kg Velikost mize X: 1050 mm Velikost mize Y: 710 mm Z avtomatskim napeljevanjem žice Os U/V: 150 x 150 mm Rezanje v vodni kopeli Laedoy S Tgzjpfx Aamod CNC krmiljenje: SPW

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, LVD Press Brake 4000 x 200T Lasdpswtmi Ejfx Aamsd Type: PPBL 200/40 Capacity: 4000 x 200T Maximum stroke: 150 mm Weight: 13.5T With mobile blade holder rack

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), A CNC precision parallel lathe Pinacho is available. Center height: 180 mm, distance between centers: 750 mm–1000 mm, turning diameter over bed/cross slide/top slide: 360 mm/335 mm/198 mm, bed width: 250 mm, spindle bore: 42 mm, spindle speed: 4000 rpm, feed rate X/Z: 10 m/min, rapid traverse X/Z: 10 m/min. Tailstock quill diameter: 58 mm, tailstock quill travel: 200 mm, Morse taper: MT3, min. steady rest/follow rest passage: 10 mm, max. steady rest/follow rest passage: 70 mm/114 mm, control: Fanuc 0i. Documentation available. On-site inspection possible. Lasdpjwftcvofx Aamed

Stanje: dober (rabljeno), Strojev za pranje pladnjev, neposredno iz nedavno zaprte tovarne za brezmesne izdelke. V izjemno dobrem stanju. Laedpfx Ajrfdq Ueamjd

Stanje: rabljeno, Leto izdelave: 2020, DOOSAN PUMA 3100LY Krmiljenje FANUC LETO IZDELAVE: 2020.11 Velikost vpenjalne glave: 12 palcev Lsdpfjzc Nznjx Aamsad Največji premer struženja: 420 mm Največja dolžina struženja: 1285 mm Premer obdelovanca (palica): 102 mm Pomik osi Z: 1350 mm Pomik osi Y: 130 mm Pomik osi X: 293 mm Konjiček Podpora SMW AUTOBLOCK - Transporter za odvoz odrezkov s strojem - Dokumentacija