Vertikalni 5-osni obdelovalni center

DMG MORI DMU 50 evolution

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 Tsdpfx Aeym T Itjqtob • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Stanje: rabljeno, Leto izdelave: 1994, Cutting diameter: 520 mm Bandsaw blade length: 7239 mm Tedpfx Aswm Rm Ioqtjb Cutting width: 1.3 mm Controller: POSIMOD Cutting area (square): 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Remnant piece length min./max.: 10 / 100 mm Cutting speed: 20 - 130 m/min Bandsaw blade dimensions: 7239 x 50 x 1.3 mm Saw motor: 5.5 kW Total power requirement: 10.0 kW Machine weight: approx. 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: 2500 mm infeed roller conveyor, chip conveyor, coolant system

Stanje: rabljeno, Leto izdelave: 2000, Table length 1160 mm Table width 710 mm Clearance 650 mm Control system WENZEL ME 5007 Tedpot Hw S Ijfx Aqtob Total power requirement kW Machine weight approx. 800 kg Space requirements approx. m W E N Z E L CNC-controlled vertical 3-D coordinate measuring machine Type LH 54 CNC, year of manufacture 2000 - Continuously maintained and calibrated by the manufacturer Y-axis: longitudinally traversing measuring bridge 600 mm X-axis: crosswise measuring head slide 500 mm Z-axis: vertical measuring quill approx. 400 mm Max. workpiece weight / table load approx. 200 kg Clearance under measuring bridge approx. 650 mm Usable total table size approx. 1,160 x 710 x 160 mm Table height above floor approx. 850 mm Machine height approx. 2,300 mm Weight approx. 800 kg Special equipment / accessories: • Machine delivered with increased accuracy • Measuring table, bridge, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for fixture/workpiece mounting • All axes are air-bearing, enabling smooth and virtually wear-free operation, equipped with incremental scales with 0.0005 mm resolution. • WENZEL CNC control system type ME 5007 for 3 to 6 axes, equipped with ME 4700 portable manual control panel with 2 joysticks for activating all software functions – ideally set up for: • WENZEL measuring software type METROLOG – II Level 2 for measuring regular geometry, graphic 3D workpiece visualization, graphical protocols, etc. including keyboard • RENISHAW control unit model PHC 10 – 2 suitable for • RENISHAW motor-driven rotary and swivel head (automatically indexable in 7.5° steps), model PH 10 T with 5-way probe system model TP 200 with various probe accessories, incl. RENISHAW probe interface PI 200 Automatic probe change possible; 6-position probe magazine model SCR 200 mounted on the table • Reference sphere for mounting on the table, working table with console, various clamping devices • Various cassette tapes and CDs with different software. Separate PC for measuring software and printer Condition: Very good – in stock, can be inspected under power, ready for demonstration, dismantled by a coordinate measuring machine specialist at the seller and reassembled here. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Tilting table +/- (A-axis): 20° / 60° Rotary table (B-axis): 360° Control system: Maho 432 (3D path control) Max. milling capacity: Steel: 60 mm and Cast Iron: 22 mm Tool magazine with: 24 stations Spindle speed range: 20 - 6300 rpm Max. table load: 200 kg Spindle taper: ISO 40 (hydraulic clamping) Spindle head swiveling left and right: 90° (manual) Quill stroke: 80 mm Feed rates: X/Z: 1 - 3000, Y: 1 - 4000, B: 0.1 - 3000°/min. mm/min Rapid traverse: X/Z: 10, Y: 8, B: 20 rpm; m/min Control voltage: 110/220 V Total power requirement: approx. 20 kVA Machine weight approx.: 5.5 t Machine dimensions (LxWxH): approx. 3.0 x 2.4 x 2.25 m Required space: approx. 5.2 x 5.0 x H: 2.3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-speed gearbox Working spindle swivels out for horizontal spindle operation Equipment: Tsdpfx Aqeu Idbystjb -Handheld control unit -Coolant system -Machine lighting

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Diese Radialbohrmaschine 2A576 wurde komplett überholt und auf volle Produktionskapazität restauriert. Grundlegende technische Daten: Bohrdurchmesser: in Stahl 80 mm / in Gusseisen 100 mm Spindelstock-Verfahrweg entlang des Auslegers: 2000 mm Maximaler Bohrungsradius: 2500 mm Spindelhub: 500 mm Tjdpfx Aqour H I Njtjb Spindelaufnahme: ISO50 Stufenlose Einstellung des Spindelvorschubs Drehzahlbereich der Spindel: 2–1600 U/min Säulendurchmesser: 500 mm Leistung des Hauptantriebsmotors: 7,5 kW Abmessungen L/B/H: 4180/1280/4125 mm Gewicht: 12 Tonnen Diese Bohrmaschine erfüllt die Mindestanforderungen an Sicherheit und Gesundheit gemäß der Richtlinie 2009/104/EG, bekannt als „Arbeitsmittelrichtlinie“. Die Maschine ist zur Vorführung unter Strom in unserem Lager in Zentralpolen bereit.

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details. Tsdolz Rvljpfx Aqtsb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Opis je naveden v priloženi tehnični dokumentaciji. Tsdpfx Aqszqcvyeteb

Stanje: rabljeno, Leto izdelave: 2018, Primerno za ponovno brušenje in izdelavo novih orodij za obdelavo lesa in kovin vseh vrst. Dodatna oprema: Polna zaščita Robotski podajalnik Fanuc s 6 nadzorovanimi osmi in sistemom kamer Programska oprema Toolstudio Standard & Advanced, različica 3 Programska oprema Helitronic Toolstudio, možnost Step Tools/Drills Avtomatski sistem za gašenje požara, Hladilnik pogona za vse pogone Merilna sonda, Posoda za zbiranje olja, Steklene merilne letev na linearnih osi, Elektrostatični sistemi za odstranjevanje hlapov, Pnevmatska naprava za vpenjanje obdelovanca, Avtomatska, hidravlično upravljana podpiralna opora Merilni čep ISO 50, 3 nosilci za brusilne diske. Dolžinski gib (os X): 400 mm Avtomatska os X' za premikanje nosilca obdelovanca: 110 mm Vertikalni gib (os Y): 320 mm Prečni gib (os Z): 320 mm Območje vrtenja rotacijske mize (os C): –110° - +/160° Območje vrtenja osi B (brusilna glava): +/-20° Nosilec obdelovanca (os A): ISO 40 Območje hitrosti vrtenja: min Tjdpfezdc Rljx Aqtsb Premer obdelovanca v proizvodnji: 0,1 – 12,7 mm Premer obdelovanca pri ponovnem brušenju: 2 – 12,7 mm maks. dolžina obdelovanca: 120 mm Dolžina reza: 70 mm Moč pogona brusilnega vretena 1: 5 kW Moč pogona brusilnega vretena 2: 1,5 kW Moč pogona brusilnega vretena 3: 1,5 kW Število vrtljajev brusilnega vretena, brezstopenjsko: 0 – 10.000 vrt/min. Priključna moč: 18 kW (400 V / 50 Hz) Teža: približno 6000 kg Dimenzije Š x G x V =: 2385 x 2200 x 2006 mm Barva: RAL 9003 bela / siv RAL 7011

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 380 mm, pomik po osi Z: 300 mm, proizvajalec krmilnikov: Fanuc 16i-M, model krmilnika: 16i-M, širina mize: 390 mm, dolžina mize: 850 mm, vrtljajska hitrost (min.): 80 obr/min, največja hitrost vrtenja: 8.000 obr/min, hitrost vretena (min.): 80 obr/min, največja hitrost vretena: 8.000 obr/min, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Pomik po osi X: 500 mm Pomik po osi Y: 380 mm Pomik po osi Z: 300 mm Velikost mize: 850 × 390 mm Krmiljenje: Fanuc 16i-M Vreteno: BT30 Obrati vretena: 80 - 8000 obr/min Čas menjave: 1,0 s Tsdpfeyw Inqsx Aqtjb Menjalnik orodij: 14 pozicij Vključeno v dobavo: 3x primež 36 nosilcev orodij Oljni filter Filtermist S800 Navodila za uporabo stroja Država izvora: Japonska Moč motorja: 3,7 kW Dimenzije stroja (D׊×V): 160 × 190 × 220 cm Teža stroja: 1900 kg

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: X-axis travel: 800 mm y-axis travel: 685 mm z-axis travel: 630 mm Tjdpfx Asytcf Usqtjb C-axis: 360° (faceplate table) Control system: Siemens 840D Power Line Spindle speed: 10,500 – 20,000 rpm Spindle torque: 180 Nm Tool holder: HSK-A63, DIN 69893 Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm) Max. workpiece size 940 x 650 mm for/on table with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009 Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009 Both control cabinets equipped with Rittal cooling units Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately. i.D. *