Radialni vrtalni stroj

MEUSER M 50 R

Stanje: rabljeno, Leto izdelave: 1970, Drilling capacity in steel (diameter): 50 mm Radial arm reach: 1250 mm Maximum workpiece height: approx. 1150 mm Drilling capacity in cast iron: 60 mm Spindle taper: MT 5 Spindle speeds: 25 – 2000 rpm Feed rates: 0.06 – 0.5 mm/rev Vertical arm adjustment: 620 mm Column diameter: 350 mm Total power requirement: 7.5 kW Pgodpfevh Nbhjx Adyeg Machine weight: approx. 4.6 t Machine dimensions (L x W x H): 2.50 x 1.08 x 2.50 m Accessories: cube table (L x W x H = 1100 x 700 x 550 mm), coolant pump.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 330 mm, izvrtina vretena: 78 mm, premer struženja nad ležiščem sani: 520 mm, višina središča: 260 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.160 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.810 kg, nosilec puše: MK 4, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 260 mm Centre distance: 1000 mm Spindle bore: 78 mm Pedpfoh Rvxhsx Adyjgg Spindle nose to DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Equipment includes: - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on the counter-surface) of the carriage and cross slide - Manual central lubrication with a pump for the longitudinal and cross slides - Complete coolant system with rear splash guard and splash guard on the carriage - Chuck guard - Control rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine mounting plates

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Pgjdpfxjm Rlb No Adyog Leadscrew and feed shaft lathe with: • 3-axis digital readout fully installed • Electromagnetic main spindle brake • Automatic feed in longitudinal and transverse direction • Safety relay • Micrometer stop • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 82 mm Centre distance: 2000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Spindle speed range: 9 - 1600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Pedpfsd I A Aujx Adyegg Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse Taper 5 Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3132 x 975 x 1270 mm

Stanje: zelo dobro (rabljeno), stružna dolžina: 5.500 mm, Manufacturer: WEIPERT Model: W1400 Control system: R&D MTC3 Turning length: 5,500 mm Swing over bed Ø: 1,400 mm Swing over cross slide: 960 mm Length: 9,000 mm Width: 2,900 mm Height: 2,900 mm Pgsdpswzhzlofx Adysg Weight: 32,000 kg

Stanje: dober (rabljeno), Leto izdelave: 1984, številka stroja/vozila: 15470, Offer 25095 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling capacity in steel ST 60: 50 mm - Spindle taper: Morse taper 4 - Spindle stroke: 180 mm - Infinitely variable spindle speeds with gear change: - Range 1: 50 – 175 rpm - Range 2: 175 – 640 rpm - Throat (distance spindle to column): 330 mm - 3 automatic feeds: 0.1 – 0.2 – 0.3 mm/rev - Table with 2 T-slots: 720 x 360 mm - Table height adjustable by rack and hand crank - Max. distance table – spindle approx. 780 mm - Max. distance machined base plate – spindle approx. 1250 mm - Coolant system - Work light Pgsdpfx Adowd Ii Uoyog - Drive motor: 400 V / 4 kW - Footprint approx.: W 720 x H 2050 x D 1150 mm - Weight approx.: 500 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Sväng över bädd: 1290 mm Sväng över tvärslid: 910 mm Sväng i urtag (l:500 mm): 1580 mm Spetsavstånd: 6000 mm Spindelgenomgång: 155 mm Spindelvarvtal: 6–800 rpm Spindelnos: ASA A2 11" Pgodpfxewc Nzpo Adysg Arbetsstyckets vikt mellan spetsar: 20 ton Kon i bakdubb: MK6 Längdmatning: 0,045–5 mm/varv Tvärmatning: 0,022–1,5 mm/varv Metrisk gänga: 0,5–56 Modulgänga: 0,25–28 Whitworth-gänga: 1/2–84/" Spindelmotor: 30 hk Tillverkningsår: 1971 Längd: 9500 mm Bredd: 2000 mm Höjd: 1600 mm Vikt: 13 400 kg Sony DRO tvärslid 3 st stabilstöd Planskiva 4-backig planskruv Härdade gejdrar Elmatning på översta sliden

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Psdpfx Aecirnisdyjgg Complete coolant system with rear splash guard and carriage splash protection Chuck guard Control rod with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Stanje: novo, The VHF 3.2 is a high-performance universal milling machine classified among conventional milling machines and part of the universal milling machine product group. This versatile model complements the proven flagship of the VHF series, offering a combination of a horizontal spindle and a swiveling vertical milling head, making it ideal for a wide range of applications. Featuring a robust frame made of high-strength cast iron and a precisely manufactured main spindle gearbox, the VHF 3.2 is perfectly suited for use in repair workshops as well as training and production departments. The machine is equipped with a spacious table providing a clamping surface of 1,370 x 320 mm and features powerful, infinitely variable feed drives in all axes via a servo motor. Essential features such as a coolant system and chip tray are included as standard. If you are looking for a powerful and robust solution in the field of conventional milling machines, do not hesitate to order online or send us an inquiry. Pgodpfxsn E Ni He Adyog

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 400 mm Swing diameter over carriage: 220 mm Turning length: 1100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis: longitudinal: 0.08 - 1.10 m/min Feed range y-axis: cross: 0.028 - 0.40 m/min Tailstock quill taper: MT4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Psdpfx Adou Ix E Hsysgg Machine dimensions (LxWxH) approx.: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm manufacturer Forkardt with exchangeable jaws - Multifix tool post - Coolant system with pump - Chuck guard - Chip tray - Splash guard Accessories: - Chuck key - Tool holder - 2 gears