Stroj za obdelavo prečk

Metabo TK U 1693

Stanje: novo, Panel Saw ALTENDORF WA 6 - Exhibition Machine - Ihjdpsu R Sx Eefx Adkjw manual height adjustment, double roller carriage, scoring unit, tiltable, outrigger table, angle-mitre fence, automatic brake, can be lowered below table height ----- Technical Specifications ----- tilt range: 0 - 45°, cutting length: 2,500 mm, cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade diameter: 315 mm, mitre fence tilt range: up to 49°, speeds: 4,200 rpm, main motor power: 5.5 HP / 4.0 kW, scoring motor power: 0.5 HP / 0.37 kW, table height: 910 mm, dust extraction port Ø: 1 x 100 / 50 mm each, weight: 450 kg - new exhibition machine -

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 5.000 kg, dvižna višina: 25.000 mm, vrsta goriva: dizel, tip droga: simpleks, dolžina vilic: 1.200 mm, vrsta pogona: Diesel, Rotating Telescopic Handler Mast Type: Quattro Condition: New Machine Technical Condition: New Front Tyre Type: Pneumatic Front Tyre Condition: 80 - 100% Rear Tyre Type: Pneumatic Rear Tyre Condition: 80 - 100% Description: The vehicle is UVV-inspected. A&M pallet fork carriage set including 1200mm pallet forks, 1500mm pallet fork carriage plate, and 5t lifting hook. 3rd control valve, 4th control valve, heater, road approval according to German regulations (StVZO), full cab, CE certificate, 3rd control valve 4th control valve heater road approval full cab CE certificate TÜV/Dekra approval 20 km/h 45% self-locking differential to the second axle 2 front adjustable LED lights on the cab 2 rear adjustable LED lights on the cab set of additional platforms for stabilising supports 455/70 Michelin wheel set standard fork carriage plate remote control with 2 joysticks automatic wheel alignment kit for upper carriage rotation by 180 degrees wired reversing camera 3-sided work platform 120 x 240 cm, 5.0t winch to be mounted on the fork carriage. Including work platform and winch. Ijdow Eqdkepfx Adkshw

Stanje: dober (rabljeno), Unit: REWA chamber filter press, used Type: 470-15-25K-HP Design: side-bar guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the specific medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): Flange, tie rods stainless steel, PP or rubber-lined Material (non-product-contacting parts): Stainless steel Ihjdpfxoqakbrj Adkew Purchase or rental: Inspection of the equipment can be arranged by appointment at our facility. Other information: We supply this unit used, fully functional or refurbished and customized to your requirements. Are you interested in renting or purchasing this unit? Contact us, we are happy to assist you.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref.-Nr.: 10626 Hersteller: DMG Typ: DMU 210 P Baujahr: 2008 Steuerungsart: CNC Steuerung: Heidenhain ITCN 530 Lagerort: Halberstadt Ursprungsland: Deutschland X-Weg: 1800 mm Y-Weg: 2100 mm Z-Weg: 1250 mm Ijdpfoyiyg Isx Adkohw B-Achse: -30 / +180 ° C-Achse: 360 ° Tischbelastung: 8000 kg Aufspannfläche: 1.700 mm Werkzeugaufnahme: HSK - 100 Spindeldrehzahl: 10.000 U/min Drehmoment max.: 288 Nm Anzahl der Stationen: 60 Kühlmittelbehälter: 40 bar l Zusatzinformationen: - Das 5-Achs Bearbeitungszentrum DMG DMU 210 P eignet sich für die hochgenaue Bearbeitung großer, schwerer Werkstücke. - Wegmeßsysteme Direkt in allen Achsen - Werkstückvermessung Heidenhain TS - Einrichtebetrieb Elektronisches Handrad - Spänentsorgung Späneförderer - Werkzeugwechsler Doppelgreifer - Technologie Motorspindel Maschine kann nach Abstimmung unter Strom besichtigt werden.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta goriva: električni, barva: srebrn, skupna masa: 2.460 kg, tip droga: teleskopski, Leto izdelave: 2022, obratovalne ure: 21 h, številka stroja/vozila: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. Yet, there’s no question that it also handles “big” jobs, delivering impressive performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane is equipped as standard with non-marking tires that do not chalk. The crane’s 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, operates for 8 hours without the need for recharging. The boom is proportionally extendable and can be further lengthened with an optional jib extension. JMG MC 25S - Lifting capacity: 2,500 kg - Net weight: 2,460 kg - Width: 900 mm - Height: 1,600 mm - Drive: Electric - Power: 4 kW - Tires: Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery: 24 V 420 Ah - Automatic braking system - Front-wheel drive – 2 gears - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle: +60° / -15° Ihodpfx Adew S Ii Nekjw - Ground clearance: 70 mm - Front tires: 18 x 7-8 - Rear tires: 15 x 4.5-8 - Operating manual - Electric motors – insulation class H

Stanje: rabljeno, številka stroja/vozila: 007350, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Ihodpfx Adewcyd Ijkjw Number of drilling spindles: 30 Number of tool positions: 28

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 3.900 h, FOR SALE: EDGING MACHINE IN VERY GOOD CONDITION, USED SINCE NEW IN A SMALL GLASSWORKS. AVAILABLE FOR INSPECTION IN WROCŁAW. Iodpfxewb U Rge Adkohw

Leto izdelave: 2022, stanje: novo, Lifting capacity: 10,000 kg Ihodpfx Adjfxgp Uskew Rotational speed: 0.03–1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A

Stanje: novo, Saw blade diameter: 420 x Ø 40 mm Cutting diameter: 170 mm Cutting length: 410 mm Saw blade dimensions: 420x3.2/2.4x40 mm Speed: 3500 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight: approx. 120 kg Space requirement: approx. 1300 x 800 x 1600 mm - Crosscut and miter circular saws for cutoff cuts * Drive motor 3.0 kW - 400 Volt - Dual-sided miter adjustment (60° / 45°) with fixed stops Iodexabztopfx Adkohw - Compound cut 45° on both sides with fixed stops - Robust grey cast iron construction - Precision linear ball bearing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Infinitely variable saw blade height adjustment - Connection stub for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound cut setting via hand crank, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative for aluminum and plastic - Infinitely adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: * 2 adjustable vertical clamping cylinders with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: rabljeno, Leto izdelave: 2017, Number of spindles: 5 pcs. Working width: 240 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully checked. Brief summary: ----- Iodpfowwl Nlex Adkohw - 5 spindles - Powerful motors - Left and top spindle electronically controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including used planer heads as available. (Technical specifications according to manufacturer – no guarantee!)