Minibus

MERCEDES-BENZ Sprinter 413 CDI MAXI *Behörde/Camper* GENERATOR

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Dodpfx Abomhhypsgjci Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2026, Funkcionalnost: popolnoma funkcionalen, NOVO NOVO Pečica za obremenitev Unox Bakertop X 10 Digital ID NOVO NOVO Konvekcijska pečica za 10 pladnjev 600 x 400 Unox pečica z inteligentno zmogljivostjo Zaslon na dotik z več kot 1000 programi Sonda za jedro temperature USB priključek TOP model z umetno inteligenco Samo pri nas preizkušeno po DGUV V3 Priključek: 400V, 32A-CEE vtič Priklop vode: 3/4 col, odtok vode: DN 40 Dimenzije: 860 x 1018 x 1219 mm, ŠxGxV Pečica NOVA in SAB preizkušena 12 mesecev garancije + storitev rezervnih delov Možnosti: Pure filter za vodo Pekači Rastilnik Lievox Ethernet povezava DDC.App Napa s kondenzatorjem pare Dodjyaf Dmepfx Abgeci Spray & Rinse čistilec Servisni paket Podnožje Vzdrževalna pogodba Dostavna storitev Navodila in zagon Obiščite našo veliko razstavo!

Stanje: rabljeno, Leto izdelave: 2005, moč: 37,6 kW (51,12 KM), vhodna napetost: 6 V, temperatura: 320 °C, notranja dolžina: 120 mm, notranja širina: 80 mm, notranja višina: 17 mm, skupna dolžina: 150 mm, skupna širina: 135 mm, skupna višina: 215 mm, skupna masa: 550 kg, Število komor: 4, vrsta goriva: električni, Miwe Condo Co.4.1208 z napo. Pečniška komora 120x80xH17 cm, električna, moč 37,6 kW, 400/230V. Dcjdpfxjy N Tbgs Abgei

Leto izdelave: 2004, stanje: delavnici obnovljeno (rabljeno), Walter Double Saw with TRKS 200 Feeder Dodsh R Tvtepfx Abgjci Cutting height of the double saw: 200 mm, motor power: 40 kW. Chain feeder with controllers and adjustable prism for various diameters. Gearbox for feed speed adjustment.

Stanje: novo, moč: 235 kW (319,51 KM), vrsta goriva: dizel, število sedežev: 55, vrsta prenosa: samodejen, emisijski razred: Euro 6, barva: bela, zavore: retarder, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, parkirni grelec, STANDARD FEATURES - Reclining backrest - With handle in the central aisle OPTIONAL FEATURES - 3-point seatbelt for each seat - Adjustable center armrest with cover - Fabric upholstery SEATS - Lineo passenger seats, adjustable - Seat color: Laura 23245105 3017/PM5006065058 - Headrest: Valencia 107-4001 - Mushroom pedestal: PN5006062772 DOORS - Door opener on the left at the dashboard - Door 2, external opening 800 mm, single-leaf - 4 red "emergency" buttons BODY - Water-resistant plywood floor edge cutouts Paint & Decoration - Enhanced corrosion protection for the underbody Paint Color - RAL 9010 Exterior Equipment - Mud flaps on all axles Flooring - Sealed joints of the flooring under the decorative trims of the body Handrails/Partitions - Partition wall with cement fiberboard coating - Partition tubes (epoxy resin coating) RAL 7004 Window Blinds - Preparation for blinds on side windows Luggage Shelf - Interior hat rack Flooring - FL021 Gayawood 4521 Yellowstone Car Radio - Dual-zone radio AM/FM/DAB+, USB and SD card slot, DIN MICROPHONE - 1 microphone for the driver and 1 for the hostess OPTIONAL - 13-pin trailer socket HEADLIGHTS - Fog lights - Xenon warning lights with door opening assist STOP REQUEST - Stop request with light and bell connection WINDOWS - All doors single glazed - Rear window single glazed - Windscreen with standard defroster - All windows non-opening - Double glazing - Emergency stop switch with chain - Driver's window double glazed VENTILATION - 2 manual roof hatches HEATING - Reinforced convectors for the passenger compartment - DEL additional water tank for the heating system - Spheros heater with preheated nozzle and reinforced water pump AIR CONDITIONING - Air conditioning + auxiliary heating 32 kW DRIVER’S COCKPIT - Reversing camera - Additional sun visor for the left exterior mirror DRIVER’S SEAT - Standard driver’s seat with integrated headrest – premium equipment - Armrests right and left of the driver's seat DRIVER AREA - Electric front and manual side curtain - Clothes hook for driver and co-driver - Driver's air conditioning LUGGAGE CABIN - Luggage compartment with door - Driver's seat heating DRIVER’S COCKPIT - Digital tachograph Dtco 4.1 Smart HOSTESS - Reclining hostess seat ENGINE Dedpfx Aoxxw Tpobgoci - 2,500 rpm - Engine power: 320 HP / 235 kW - Speed limiter 100 km/h - Diesel filter heating for Webasto - Fuel type: Diesel + HVO AUTOMATIC TRANSMISSION - Automatic transmission ZF 6AP1220B - Keypad for automatic transmission on the left of the driver outside the driver’s area – 6 buttons REAR AXLE - Rear axle ratio 5.63 SUSPENSION - Shock absorbers - Air suspension - Lowering function BRAKE SYSTEM - Brake pads type Intercity - FAE Italy FUEL TANK - Tank cap & key - Fuel tank capacity 430 l (310 l + 120 l) WHEELS AND TIRES - Standard on-board tools - Spare wheel holder with spare wheel WHEEL NUT COVERS / RIM COVERS - Front wheel nut covers TIRES - Tires 295/80R22.5 – High-performance for road/snow 152/148 - X Multiway 3D XZE + XDW Ice Grip

Stanje: novo, Leto izdelave: 2025, vrsta goriva: dizel, moč: 52 kW (70,70 KM), proizvajalec motorjev: Perkins 1103A-33T, Namen uporabe: gradbeništvo Lastna teža: 778 kg Moč generatorja: 65 kVA Dimenzije tovornega prostora: 168 x 76 x 133 cm CE oznaka: da Prostornina rezervoarja za vodo: 145 l Za več informacij se obrnite na ekipo DPX. = Dodatne možnosti in oprema = - Baterija Dodpfx Ajv Hk H Aobgjci - Nadzorna plošča - Rezervoar

Stanje: dober (rabljeno), Hydraulic power unit, hydraulic pump, universal power pack, hydraulic station, injection molding machine, plastics injection molding machine, hydraulic press for plastics -Manufacturer: Flutec, hydraulic power unit taken from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus Type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Single components: see photos -Dimensions: 1130/430/H350 mm -Weight: 152 kg Dedpfx Absg Dvx Nsgoci

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), Leto izdelave: 2024, obratovalne ure: 25 h, številka stroja/vozila: 24168, The inoCOMB Cabrio small silo is used for mixing and conveying pumpable materials (mineral or organic products) with a particle size of up to approximately 8 mm. Ready-mixed rendering mortar, dry mortar, screed material, or floor leveling compounds supplied by the material manufacturer can be processed. The material container of the small silo can be filled either with bagged goods, one-way containers, or big bags. During operation, the dry material is conveyed from the material hopper into the mixing tube via the dosing shaft. In the mixing tube, the dry material is mixed with water using the mixing shaft to produce a homogeneous, pasty or liquid product. At the outer end of the mixing tube, the mixed material falls directly into the pump hopper. In the pump hopper, the material is conveyed via the pump shaft to the pump unit (rotor/stator). From there, the material is pumped through material hoses to the point of application. Dcsdpfx Abeyk Twpsgji