Pipa za cevni navoj (27959)

May R 3 3/4 Zoll

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Dodjfrvzvjpfx Afleul Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Leto izdelave: 2008, obratovalne ure: 9.750 h, Stanje: rabljeno, M2 GmbH offers you the following machine: Dujdpoh Tyz Aefx Aflsl - Piling and drilling rig RTG RG 25S - Upper carriage: Sennebogen BS 80 R - Engine: CAT C18, 570 kW - Optional: Vibratory hammer MR 125 V, rotary drive KDK 232 S, double head system DKS 100/200 - Features: Vibratory installation, Kelly drilling, and SOB drilling The machine is in excellent condition and immediately ready for operation.

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Dusdpfsiw Dlkox Aflsl Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Stanje: zelo dobro (rabljeno), Control: D.Electron Z 32 Center height: 220 mm Center distance: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Dusdpfxed Sitks Aflsl Travel path - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6“ Spindle bore: 62 mm Spindle speed: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill stroke (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Stanje: zelo dobro (rabljeno), The SB-10 grinding machine enables flawless grinding of boring bars, thread-cutting tools, parting-off tools, or boring bar steels made of HSS or carbide for jig boring machines or lathes. By selecting the correct rake angle to suit the respective material, you achieve optimum utilization and a longer service life of the tools. These boring bars are still mostly ground by hand today and are subsequently used on high-quality machine tools. On the SB-10, the steels are ground using a profiled grinding wheel at the circumference. The desired profile is achieved effortlessly with a dressing diamond and the template mounted on the machine. For excellent stability and surface quality, the horizontal carriage is mounted on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Dusdpfx Afjfqicxeljl Speed: 2800 rpm Longitudinal adjustment: 130 mm Transverse adjustment: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions (W x D x H): approx. 550 x 450 x 650 mm Weight: approx. 70 kg

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Duodpjd I A Dhsfx Aflol Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head Dujdpfxjlgvkio Aflel AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Dodsixntwopfx Afleul Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Dujdpfx Afoqhkukelsl Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Leto izdelave: 2024, Stanje: novo, Make: DURMA Duodpfx Aod R Er Doflol Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30' Strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (LxWxH): 3200x2300x1350 mm Weight: 3780 kg Standard equipment: - EZM9910 control unit - Programmable backgauge range 750 mm via control unit - Plastic inserts for hold-downs - 1 side gauge and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Recirculating ball screw - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0–180° The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Additional machines are available and ready for demonstration at our Staufenberg location. Further information is available on request.