Vertikalni obdelovalni center

Matsuura MAM72-25V

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), 5-axis machining centre FANUC G-Tech 30i Travel distances: 550 x 410 x 450 mm B-axis table: +/- 110° A-axis table: 360° Spindle mount: BT40 Big Plus Spindle speeds: up to 15,000 rpm Tool changer: 40 positions Pallet stations: 2 x diameter 250 mm Internal spindle cooling 3D touch probe Tool measurement system 15x pallets Approx. 80x tool holders KNOLL / TURBO coolant system Djdpfxjgufmrs Adhjcn MARCELS MASCHINEN CH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 66.963 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 550 mm, pomik osi Y: 410 mm, pomik po osi Z: 450 mm, obremenitev mize: 40 kg, največja hitrost vrtenja: 15.000 obr/min, TECHNICAL DETAILS B axis: +110° to -110° C axis: 360° Table indexing B and C axes: 0.001° Workpiece Max. workpiece size: Ø 250 × height 250 mm Max. table load: 40 kg Pallet system Pallet size: Ø 130 mm Max. workpiece size on pallet: Ø 250 × height 250 mm Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Standard speed range: 50 - 15,000 rpm Spindle taper: BT 40 JIS B 6339 Big+ Dsdpjwx Iugjfx Adhocn Spindle motor power with FANUC drive: 7.5 / 5.5 kW Max. torque: 65.1 Nm at 1,100 rpm Rapid traverse and feed rates Rapid traverse X, Y, Z axes: 50,000 mm/min Rapid traverse B axis: 30 rpm Rapid traverse C axis: 50 rpm Feed rate X, Y, Z axes: 1…50,000 mm/min Feed rate B axis: 30 rpm Feed rate C axis: 50 rpm Tool changer Max. tool weight: 10 kg Max. tool diameter with all pockets filled: Ø 96 mm Max. tool diameter with adjacent pockets empty: Ø 150 mm Max. tool length: 300 mm Guides Axis guides: Linear roller guides Lubrication: Permanent grease lubrication Ball screw diameter X, Y, Z axes: Ø 36 mm Lead: 16 mm Axis drives Power X, Y, Z axes: 4.5 / 4.5 / 5.5 kW Power B, C axes: 4.5 / 2.5 kW Axial force X, Y, Z axes: kN MACHINE DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) Serial number: SN17224 Weight & Dimensions Machine weight standard: 7,800 kg Machine with PC-2: 8,600 kg Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm Connections Total connected load standard machine: 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5-9.5 bar EQUIPMENT 5-axis simultaneous control Tool magazine capacity extension to 40 tool positions Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y and Z axes, with air purge KNOLL coolant system: 1 scraper or hinged belt chip conveyor with lift pump and chip discharge to operator side (type: 500 K-1/10, year: 2010) 1 internal coolant supply through spindle with coolant pump KTS25-50T, capacity 31 l/min at 70 bar, 5.5 kW, pressure switchable in 3 steps 1 external cooling unit with coolant pump, capacity 100 l/min at 1.4 bar 1 coolant flushing unit with coolant pump, capacity 100 l/min at 1.4 bar 1 compact filter KF200, filtration capacity 200 l/min 2 spiral auger conveyors in the machine RENISHAW OMP 60 measuring system for automatic zero-point setting and workpiece measurement, can be changed via tool changer OMRON pressure transducer for tool length measurement and tool breakage monitoring

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, A CNC 5-axis vertical machining center from Matsuura is available. Travel axes X/Y/Z: 550mm/440mm/580mm, spindle taper: BT40, spindle speed: 15,000 rpm, tool magazine capacity: 40 stations, pallet changer: double (2-pallet system), pallet diameter: 130mm. Machine dimensions (X/Y/Z): approx. 2900mm/2550mm/3000mm, weight: approx. 6000kg, control unit: Matsuura G-Tech 30i, machine run time: approx. 19,911 hours. Includes 2 additional pallets and Knoll coolant system. Documentation is available. On-site inspection is possible. Djdpfx Adowyxavehecn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 550 mm, pomik osi Y: 410 mm, pomik po osi Z: 450 mm, model krmilnika: Matsuura G-Tech 30i, največja hitrost vretena: 20.000 obr/min, kot vrtenja osi B (min.): −220 °, kot vrtenja osi B (max.): 220 °, TECHNICAL DETAILS X-axis travel: 550 mm Y-axis travel: 410 mm Z-axis travel: 450 mm B-axis rotation: ±220° C-axis rotation: 360° CNC control: Matsuura G-Tech 30i Spindle and Tooling Speed range: 20,000 rpm Tool holder: BT40 Tool length: 300 mm Tool diameter: 150 mm Tool weight: 10 kg Workpiece Capacity Workpiece diameter: 300 mm Workpiece weight: 40 kg MACHINE DETAILS Machine dimensions (W x D x H): 3,032 × 5,120 × 2,705 mm Power consumption: 32 kVA Dcsdpov Rb Hhjfx Adhjn EQUIPMENT - Internal cooling system - Automatic pallet changer - Automatic tool changer - High-pressure coolant 20 bar - Chip conveyor - FSE chip management system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, 5-axis vertical machining center, used, year of manufacture 2007 / SN17224 / Control ON time: 66,963 hours Control MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining Travel X-axis travel: 550 mm Y-axis travel: 410 mm Z-axis travel: 450 mm B-axis: +110° to -110° C-axis: 360° Max. workpiece size: Ø250 x height 250 mm Max. table load: 40 kg Table indexing B- and C-axes: 0.001° Pallet size: Ø130 mm Max. workpiece size: Ø250 x height 250 mm Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Speed range (standard): 50 – 15,000 rpm Spindle interface with face contact: BT 40 JIS B 6339 Big+ Spindle motor output with FANUC drive: 7.5/5.5 kW Max. torque: 65.1 Nm up to 1,100 rpm Rapid traverse and positioning speeds Rapids: Rapid traverse X, Y, and Z axes: 50,000 mm/min B-axis: 30 rpm C-axis: 50 rpm Feed rates: X, Y, and Z axes: 1 – 50,000 mm/min B-axis: 30 rpm C-axis: 50 rpm Tool changer Max. tool weight: 10 kg Max. tool diameter with all positions filled: Ø96 mm Max. tool diameter with adjacent stations free: Ø150 mm Max. tool length: 300 mm Guides Axis guides: Linear roller guides Lubrication: Lifetime grease lubrication Ball screws Ball screw diameter X, Y, and Z axes: Ø36 mm Lead: 16 mm Axis drives Power X, Y, and Z axes: 4.5/4.5/5.5 kW Power B- and C-axes: 4.5/2.5 kW Axial force X, Y, and Z axes: KN Space requirements* (standard machine) Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm *Dimensions may vary for this particular machine! Machine weight Standard machine: 7,800 kg Machine with PC-2: 8,600 kg Connection data Total connected load: Standard machine: 32 kVA Machine with PC-2: kVA Connection voltage: 3 x 400V, 50 Hz Compressed air connection: 5.5 – 9.5 bar 5-axis simultaneous control Upgrades Tool magazine capacity extended from the standard 30 to 40 tool stations Pallet changer with 2 pallets, 130 mm diameter Direct measuring system (Heidenhain) on X, Y, and Z axes, air purge Coolant systems KNOLL coolant system comprising*: - 1 scraper conveyor or hinged belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year 2010) - 1 through-spindle coolant supply with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW coolant pressure, 3-stage switchable - 1 external cooling with coolant pump, output 100 l/min at 1.4 bar - 1 coolant shower with coolant pump, output 100 l/min at 1.4 bar Dcsdpfxjwwk Dzj Adhjn - 1 compact filter KF200, filtration capacity 200 l/min - 2 spiral chip conveyors in the machine, standard option Measuring in the machine - RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be loaded into the spindle by the tool changer - OMRON pressure sensor for tool length measurement and tool breakage monitoring Subject to technical modifications and errors. Prior sale reserved!