Navpični obdelovalni center
Matsuura MAM72-25V PC-2

Name: Matsuura MAM72-25V PC-2
Brand: Matsuura
Availability: InStock

Leto izdelave

2007

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Hessen

Navpični obdelovalni center Matsuura MAM72-25V PC-2

Spremljaj dražbo

Podatki o stroju

Opis stroja:: Navpični obdelovalni center

Proizvajalec:: Matsuura

Model:: MAM72-25V PC-2

Leto izdelave:: 2007

Stanje:: pripravljen za uporabo (rabljen)

Funkcionalnost:: popolnoma funkcionalen

Obratovalne ure:: 66.963 h

Tehnične podrobnosti

Potovalna razdalja osi X:: 550 mm

Pomik osi Y:: 410 mm

Pomik po osi Z:: 450 mm

Obremenitev mize:: 40 kg

Največja hitrost vrtenja:: 15.000 obr/min

zagotovitev

Lokacija:: Hessen, Nemčija – Razdalja: pribl. 674 km

Razpoložljivost:: takoj po zaključku dražbe

Dobavni pogoji:: FCA

Stroški demontaže in nakladanja:
1.000,00 € (zavezujoče)

Prevzem na lokaciji:
brezplačno

Stroški pošiljanja:

Opis

TECHNICAL DETAILS
B-axis: +110° to -110°
C-axis: 360°
Table indexing B and C axes: 0.001°

Workpiece
Max. workpiece size: Ø 250 x height 250 mm
Max. table load: 40 kg

Pallet System
Pallet size: Ø 130 mm
Max. workpiece size on pallet: Ø 250 x height 250 mm
Max. pallet load: 40 kg
Pallet interface: Capto C6

Spindle
Speed range - standard: 50 - 15,000 rpm
Spindle taper: BT 40 JIS B 6339 Big+
Spindle motor output with FANUC drive: 7.5 / 5.5 kW
Max. torque: 65.1 Nm at 1,100 rpm

Rapid Traverse and Feed Rates
Rapid traverse X-, Y-, Z-axis: 50,000 mm/min
Rapid traverse B-axis: 30 rpm
Rapid traverse C-axis: 50 rpm
Feed rate X-, Y-, Z-axis: 1…50,000 mm/min
Feed rate B-axis: 30 rpm
Feed rate C-axis: 50 rpm

Tool Changer
Max. tool weight: 10 kg
Max. tool diameter (all stations occupied): Ø96 mm
Max. tool diameter (adjacent pockets free): Ø150 mm
Max. tool length: 300 mm

Guideways
Axis guideways: Roller guideways
Lubrication: Lifetime grease lubrication
Ball screw X-, Y-, Z-axis Ø: 36 mm
Pitch: 16 mm

Axis Drives
Power X-, Y-, Z-axis: 4.5 / 4.5 / 5.5 kW
Power B-, C-axis: 4.5 / 2.5 kW
Axial force X-, Y-, Z-axis: kN

MACHINE DETAILS
Control: MATSUURA G-Tech 30i (FANUC 30i MA)
Serial number: SN17224

Weight & Dimensions
Standard machine weight: 7,800 kg
Machine with PC-2: 8,600 kg
Machine height above floor: 2,705 mm
Width: 2,281 mm
Depth: 3,665 mm

Connection Data
Total connected load standard machine: 32 kVA
Connection voltage: 3 x 400 V, 50 Hz
Compressed air connection: 5.5-9.5 bar

EQUIPMENT
5-axis simultaneous control
Expanded tool magazine capacity to 40 tool stations
Pallet changer with 2 pallets, 130 mm diameter
Direct measuring system (Heidenhain) on X-, Y- and Z-axes with air purge protection

KNOLL coolant system:
1 scraper belt or hinged belt chip conveyor with lift pump and chip discharge to operator’s side (type: 500 K-1/10, year of manufacture 2010)
1 through-spindle coolant supply with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW, pressure adjustable in 3 stages
1 external cooling with coolant pump, output 100 l/min at 1.4 bar
1 coolant flush with coolant pump, output 100 l/min at 1.4 bar
1 compact filter KF200, filter capacity 200 l/min

2 spiral chip conveyors in the machine
RENISHAW OMP 60 measuring system for automatic workpiece zero point setting and measurement vi

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Obdelava plačil

Dodatni stroški nakupa:: 18 %

Plačilni pogoji:: 100 % predplačilo

Načini plačila:: Bančno nakazilo

Račun se izdaja v višini najvišje ponudbe, pri čemer se prištejejo morebitni stroški demontaže/nakladanja, stroški pošiljanja ter dodatni stroški nakupa in zakonski DDV.

Podrobnosti ponudbe

ID ponudbe:: A19524101

Št. reference:: AUC-2507043

Nazadnje posodobljeno:: dne 14.08.2025

Ekskluzivna ponudba:: na voljo samo na dražbi

Opazovati

Stik

Kontaktna oseba: Cedric Schuhmann

ID stroja: 19524101

+49 201 8... oglasi

Telefon: +49 201 857 861 77

Zaščita kupca Machineseeker

Varno plačilo prek fiduciarniega računa

Strogo preverjeni prodajalec

Osebna in večjezična podpora

Izplačilo kupnine se izvede šele po predaji blaga.

ogled

Možen ogled

Machineseeker v splošnem priporoča ogled rabljenih strojev.

Vsi podatki so vneseni po najboljšem vedenju in vesti – prepričajte se na kraju samem.

Ponudnik

Profesionalni komercialni prodajalec
Od 2006 pri Machineseeker

Hessen Nemčija

Razdalja: pribl. 675 km

Tukaj bi lahko stala vaša naprava

Dražba s številko 1

Prodate v samo nekaj tednih!

Prodajate po najvišji ceni!

Prodajate brez fiksnih stroškov in tveganj!

ali pokličite +49 201 857 861 10

Razpravljati o sodelovanju

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Univerzalni obdelovalni center MATSUURA MAM72-25V PC2

Schweiz

524 km

Univerzalni obdelovalni center
MATSUURAMAM72-25V PC2

Klic

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), 5-axis machining centre FANUC G-Tech 30i Travel distances: 550 x 410 x 450 mm B-axis table: +/- 110° A-axis table: 360° Spindle mount: BT40 Big Plus Spindle speeds: up to 15,000 rpm Tool changer: 40 positions Pallet stations: 2 x diameter 250 mm Internal spindle cooling 3D touch probe Tool measurement system 15x pallets Approx. 80x tool holders KNOLL / TURBO coolant system Iasdpfx Aegufmrsf Tol MARCELS MASCHINEN CH

Poglej podrobnosti

Mali oglas

Stroj za brušenje zobnikov REİSHAUER RZ701

Bursa

1.318 km

Stroj za brušenje zobnikov
REİSHAUERRZ701

Klic

Mali oglas

Stroj za testiranje stožčastih zobnikov KLINGELNBERG-OERLIKON T60 A

Hilden

813 km

Stroj za testiranje stožčastih zobnikov
KLINGELNBERG-OERLIKONT60 A

Klic

Stanje: rabljeno, Leto izdelave: 2007, Wheel diameter – max. 500 mm Hypoid adjustment ±70 mm Axle cross angle 90° Y-axis distance 150 – 350 mm Z-axis distance 120 – 340 mm Speed range – stepless 0 – 5000 rpm Spindle torque 57 Nm Taper 99.2 mm Drawbar force – tool clamping 23,000 N Braking torque max. 93 Nm Total connected load 20 kVA Total power requirement 15 kW Machine weight approx. 6 t Space requirement approx. 2.35 x 2.24 x 2.5 m Working area: Crown wheel diameter max. – 500 mm Hypoid adjustment X (v) – ±70 mm Iaedpfx Afsukitxs Tol Axle angle – 90° Distance Y-(H) axis crown wheel/flange pinion spindle – 150 ... 350 mm Distance Z-(J) axis pinion/flange crown wheel spindle – 120 ... 340 mm Pinion spindle head: Speed range, stepless – 0 ... 5000 rpm Torque – 57 Nm at n = 0 ... 1240 rpm Torque – 54 Nm at n = 1240 ... 5000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) Drawbar force for tool clamping max. – 23,000 N Crown wheel spindle head: Speed range, stepless – 0 ... 3000 rpm Torque – 95 Nm at n = 0 ... 750 rpm Torque – 93 ... 24 Nm at n = 750 ... 3000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) / (Ø35.6 mm (#14)) Drawbar force – max. 23,000 N Max. crown wheel braking torque – 93 Nm up to 3000 rpm pinion speed at i = 1:4 Max. crown wheel braking torque – 93 Nm up to 1200 rpm pinion speed at i = 1:1.6 Max. crown wheel braking torque – 59 Nm up to 1200 rpm pinion speed at i = 1:1 Electrical: Total connected load – 20 kVA (machine effective power) Voltage – 3 x 400 V (others on request) Voltage tolerance – ±10% Frequency 50 Hz (others on request)

Poglej podrobnosti

Mali oglas

Shildon

1.506 km

Obdelovalni Center
BrotherTC 32B QT

Klic

Mali oglas

Oblikovalec zobnikov GLEASON- PFAUTER 100 S

Kanada

7.993 km

Oblikovalec zobnikov
GLEASON- PFAUTER100 S

Klic

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Wheel diameter - max. 100 mm Wheel width 26 mm Module - max. 3 Module - min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S Gear Shaping Machine for manufacturing internal and external cylindrical gears and other regularly recurring rollable profiles and shapes on the cylindrical workpiece circumference, as well as for single-piece production of profiles. Technical specifications: Nominal workpiece diameter 100 mm Maximum rotating diameter 150 mm Nominal module of the machine approx. 3 mm (reference value depending on the respective machining task) Stroke spindle speed range 0 - 3,000 rpm Manual stroke position adjustment range 20 mm Maximum gear width 26 mm Minimum rise height of hydrostatic skew guide 400 mm Minimum/maximum distance between tool and workpiece spindle -20/+180 mm Column tilt range (manual) -1/+11° Tool holder (manual clamping) HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight approx. 7,000 kg Iedpfx Aev Ehbbsf Teal with robot cell

Poglej podrobnosti

Mali oglas

Univerzalni obdelovalni center DMU 80 P hi-dyn

Sonnenbühl

505 km

Univerzalni obdelovalni center
DMU80 P hi-dyn

30.000 €

Začetna cena brez DDV

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 19.853 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11170000963, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, 5-Achs-Simultanbetrieb Iedpowqp Hujfx Af Toal Drehzahl: 18.000 U/min Werkzeugwechsler: 60 Plätze / SK 40 DIN69871 Werkzeuge im Preis enthalten IKZ (Innenkühlung) / Blasluft Heidenhain Steuerung 426/430

Poglej podrobnosti

Mali oglas

Stroj za brušenje navojnih črvov REISHAUER UL 900

Malsch

586 km

Stroj za brušenje navojnih črvov
REISHAUERUL 900

Klic

Stanje: zelo dobro (rabljeno), Premer obdelovanca: 10 - 250 mm Dolžina navoja: 900 mm Navojni korak: 0,3 - 100 mm Vrtljaji vretena: 72 / 1700 - 2540 min⁻¹ Odrezovanje: 0,03 - 8 mm Maks. vpenjalna dolžina: 1190 mm Največji modul: 10 Obdelovalni vrtljaji: 0,4 - 160 min⁻¹ Iodpfew Rrhgox Af Toal Skupna potrebna moč: 13 kW Teža stroja približno: 7,4 t Potreben prostor približno: 4,5 x 2,0 x 2,1 m Veliko dodatne opreme: prirobnice, pretvorniki, naprave in valji za obdelavo, notranje brusno vreteno, podporniki ipd.

Poglej podrobnosti

Mali oglas

Kanada

7.993 km

Oblikovalec zobnikov
LiebherrLFS 382

Klic

Stanje: dober (rabljeno), Leto izdelave: 2003, Ram stroke – max. 100 mm Module – max. 8 Table diameter: 400 mm Workpiece diameter: 600 mm Strokes per minute: 80–1200 strokes/min Radial axis feed rate: 1 – 3750 mm/min Iajdpovfwuqjfx Af Tsl Adjustable angle: -0.5° to +0.5° Accessories: - Various tool holders - Various clamping devices - Documentation

Poglej podrobnosti

Mali oglas

Stroj za rezkanje zobnikov Liebherr LC 382

Sankt Leon-Rot

587 km

Stroj za rezkanje zobnikov
LiebherrLC 382

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, obratovalne ure: 49.220 h, Funkcionalnost: popolnoma funkcionalen, Prodaja se čudoviti stroj za odvalno rezkanje zobnikov LC 382. Stroj je bil strogo vzdrževan s strani podjetja LIEBHERR in zagotavlja najboljše tolerance. Največji premer obdelovanca: 500 mm Modul - maks. 10 Širina zobnika - maks. 350 mm Najmanjše število rezkanih zob: 4 Iasdpfxsxlzr Nj Af Tel Rezkalna glava - nagibna + / - 45° Obremenitev delovne mize: 18 kN

Poglej podrobnosti

Mali oglas

Jünkerath

778 km

Oblikovalec zobnikov
GLEASON100S

18.000 €

Stalna cena brez DDV

Klic

Stanje: rabljeno, Leto izdelave: 2005, Machine weight approx. 7,800 kg Space requirement approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gear: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swivel diameter: 150 mm - Maximum internal diameter: 100 mm Tooling: - Spindle taper in milling spindle: HSK-D63 - Milling spindle diameter: 85 mm - Maximum stroke length: 30 mm Machine travel distances: - Radial (X-axis): 180 mm - Column swivel (B-axis): -1 to +11 degrees Machine – workpiece table: Iaodpfxoudc S Hj Af Tjl - Outer diameter: 220 mm S23i7dru - Clamping diameter: 160 mm - Bore: 63 mm Speeds: - Feed rate X-axis: 12,000 mm/min - Workpiece table (C-axis): 0–400 rpm - Cutter (C2-axis): 0–300 rpm - Spindle stroke (A-axis): 500–3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Connected load: 35 kVA - Cable cross-section: 35 mm² - Fuse protection: 80 A

Poglej podrobnosti

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.