Navpični obdelovalni center

Matsuura MAM72-25V PC 2

5-axis vertical machining center, used, year of manufacture 2007 / SN17224 / Control ON time: 66,963 hours

Control
MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining

Travel
X-axis travel: 550 mm
Y-axis travel: 410 mm
Z-axis travel: 450 mm
B-axis: +110° to -110°
C-axis: 360°

Max. workpiece size: Ø250 x height 250 mm
Max. table load: 40 kg

Table indexing B- and C-axes: 0.001°

Pallet size: Ø130 mm
Max. workpiece size: Ø250 x height 250 mm
Max. pallet load: 40 kg
Pallet interface: Capto C6

Spindle
Speed range (standard): 50 – 15,000 rpm
Spindle interface with face contact: BT 40 JIS B 6339 Big+
Spindle motor output with FANUC drive: 7.5/5.5 kW
Max. torque: 65.1 Nm up to 1,100 rpm

Rapid traverse and positioning speeds
Rapids:
Rapid traverse X, Y, and Z axes: 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Feed rates:
X, Y, and Z axes: 1 – 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Tool changer
Max. tool weight: 10 kg
Max. tool diameter with all positions filled: Ø96 mm
Max. tool diameter with adjacent stations free: Ø150 mm
Max. tool length: 300 mm

Guides
Axis guides: Linear roller guides
Lubrication: Lifetime grease lubrication
Ball screws
Ball screw diameter X, Y, and Z axes: Ø36 mm
Lead: 16 mm

Axis drives
Power X, Y, and Z axes: 4.5/4.5/5.5 kW
Dcsdowwk Dzspfx Adhsn
Power B- and C-axes: 4.5/2.5 kW
Axial force X, Y, and Z axes: KN

Space requirements* (standard machine)
Machine height above floor: 2,705 mm
Width: 2,281 mm
Depth: 3,665 mm
*Dimensions may vary for this particular machine!

Machine weight
Standard machine: 7,800 kg
Machine with PC-2: 8,600 kg

Connection data
Total connected load:
Standard machine: 32 kVA
Machine with PC-2: kVA
Connection voltage: 3 x 400V, 50 Hz
Compressed air connection: 5.5 – 9.5 bar
5-axis simultaneous control


Upgrades
Tool magazine capacity extended from the standard 30 to 40 tool stations

Pallet changer with 2 pallets, 130 mm diameter

Direct measuring system (Heidenhain)
on X, Y, and Z axes, air purge

Coolant systems
KNOLL coolant system comprising*:

- 1 scraper conveyor or hinged belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year 2010)

- 1 through-spindle coolant supply with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW coolant pressure, 3-stage switchable

- 1 external cooling with coolant pump, output 100 l/min at 1.4 bar

- 1 coolant shower with coolant pump, output 100 l/min at 1.4 bar

- 1 compact filter KF200, filtration capacity 200 l/min

- 2 spiral chip conveyors in the machine, standard option

Measuring in the machine

- RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be loaded into the spindle by the tool changer

- OMRON pressure sensor for tool length measurement and tool breakage monitoring

Subject to technical modifications and errors. Prior sale reserved!

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.