Ekscentrična stiskalnica z enim stolpcem

Maskinexport nicht bekannt

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: Dcsdpfxsd Nl E Uo Afqsr - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, LZ lathe, manufacturer: KERN, type: DS 20 AL, year approx. 1970 Equipped with 3-jaw chuck Forkardt 250 mm, quick-change tool post Multifix size C with holders, and coolant system. Swing over bed: 500 mm Dodpfxjgqxcio Afqecr Swing over cross slide: 250 mm Distance between centers: 1000 mm Spindle speeds: 12 - 1200 rpm Machine powered on and can be demonstrated under power. Good guides.

Stanje: rabljeno, Leto izdelave: 2007, Dolžina pregibanja 3050 mm Maks. zmogljivost predpregiba 13 mm Maks. zmogljivost valjanja 16 mm Dcsdoxhgqiepfx Afqer Premer zgornjega valja 340 mm Premer spodnjega valja 340 mm Premer stranskega valja 240 mm 4-valjni Popolnoma hidravličen Hidravlični nosilni ležaj Digitalno odčitavanje položajev valjev Opremljen z: Zgornja podpora Stranska podpora

Stanje: dober (rabljeno), premer struženja: 5.000 mm, pomik po osi Z: 2.000 mm, stružna dolžina: 2.500 mm, The machine is in good technical condition, fully functional, and was modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5000 mm, and a chuck diameter of 2500 mm. It can accommodate workpieces weighing up to 40 tons with a height of 2000 mm. Dedpfx Afsv Dkykjqjcr

Leto izdelave: 1965, Stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations Dedpfx Aecubatofqjcr - operating manual available

Stanje: rabljeno, Leto izdelave: 1995, premer struženja nad ležiščem sani: 500 mm, Universal lathe Make: ZMM, Model 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed:500 mm Spindle bore: 73 mm Dimensions (LxWxH): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live centre • Coolant pump • Machine lamp All information is without guarantee. Dcjdpewudhuofx Afqer A powered demonstration is possible at any time in our showroom.

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Dsdpfx Ajfx Hv Hefqscr Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Dcedpju Nc Emjfx Afqor Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting

Leto izdelave: 1981, Stanje: pripravljen za uporabo (rabljen), Working width: 2500 mm, max. sheet thickness: 20 mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine designed for interchangeable top rolls down to min. Ø 450 mm, machine overhauled in 2009, factory inspection in 2012. Dcedpfx Afjnvfdboqor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Pressing force: 300 t Table size: 1,200 x 850 mm Throat depth: 400 mm Ram width: 1,100 mm Table opening: 400 x 250 mm Installation height: 500 mm Strokes per minute: 32 1/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Weight: approx. 19,500 kg Other features - Approved for manual loading operations - Equipped with Herion safety valve Xsz 20 - Motorized central grease lubrication - Pneumatic ram weight compensation cylinder - Motorized ram adjustment Dcsdpjd A Hbcjfx Afqsr - T-slots in ram - Free-standing control panel - Connecting rod bearings overhauled