Formatna žaga

Martin T60 Classic in CE-Ausstattung

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Iedpfx Aajgtm U Ao Uoar Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec Iajdpfjd H Rf Tjx Aa Ujr • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: dober (rabljeno), Leto izdelave: 1995, maks. dolžina reza 6200 mm Iedpfxsxiu Dts Aa Ujar maks. širina reza 600 mm maks. višina reza 170 mm motor 11 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Table saw from 2014. This Altendorf F45 features a sliding table length of 3000 mm and a cutting width of 1300 mm. It is equipped with a powerful 5.5 kW main motor and supports a maximum saw blade diameter of 550 mm. The machine comes with a swivelling, eye-level control panel and a rip fence for precision cuts. If you are looking for high-quality sawing performance, consider the Altendorf F45 table saw we are offering for sale. Contact us for further details. • Sliding table length: 3000 mm • Cutting width: 1300 mm • Maximum saw blade diameter: max. 550 mm • Main motor power: 5.5 kW (7.5 HP) Isdeywk H Aopfx Aa Uear • Main motor manufacturer: ATB • Operating voltage: 400 V • Frequency: 50 Hz • Current: 11.5 A • Phases: 3 • Control panel: swivelling, mounted at eye level • Scoring unit preparation: yes • Rip fence: included • Rip fence type: Manual adjustment on hardened, chrome-plated round bar • Rip fence display: DIGIT X (electronic digital thickness display) Additional equipment • AKE clamping system • Table extension: 840 mm • Mitre fence • DUPLEX fence (cutting length up to 1350 mm)

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 854 h, skupna širina: 2.450 mm, skupna višina: 1.100 mm, skupna dolžina: 1.900 mm, Lastna teža: 800 kg Cena: na zahtevo - Leto izdelave: 2017 - Dokumentacija na voljo: Ne Iodpfxjxan Utj Aa Uoar - Prisotna CE-oznaka: Da - Prisoten CE-certifikat: Ne - Serijska številka: 5037411-000150 - Obratovalne ure: 854 - Transportne mere: 1900mm x 2450mm x 1100mm (d x š x v) - Transportna teža [kg]: 800 kg - Transportni paketi [kos]: 2 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračunavanje razlike v ceni: DDV je odbiten za podjetja Dostava in odkup so možni kadarkoli za vse stroje iz industrijske panoge Yorick Diebels

Stanje: rabljeno, Crosscut Saw 3 kW Iaedpfx Aajwgwlko Ujr Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: Variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Arrangement: Top Three-Phase Motor: 3 kW Spindle Diameter: 30 mm Speed: 2800 rpm Saw Blade Diameter: 400 mm * Automatic brake with speed monitoring * Infinitely variable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 Grooving Spindles, 50 mm Diameter ----- Power: 2 x 7.5 kW Speed: 4200 rpm Spindle Diameter: 50 mm Tool Diameter: approx. 360 mm Usable Length: 300 mm * Both grooving spindles positionable via ball screw * Fully programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Swing Table ----- * Swivel range: +/- 65° * Automatically changing backstop (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Backstop positioned in the cutting plane at every angle setting Special Equipment ----- Continuously variable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction Port Diameter: 2 x 180 mm for grooving spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show an identical model. Original photos currently unavailable. (Technical data according to manufacturer – subject to change!) All prices stated are net. VAT to be added as per statutory rate.

Stanje: novo, The ALTENDORF F 25 offers everything you need from a sliding table saw in a compact footprint. Whether for your first own workshop, daily operations, industrial production, or as a powerful secondary machine — the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be processed effortlessly thanks to outstanding precision, easy handling, and excellent cut quality. The single-sided tilting saw unit also allows for angle cuts. The smooth-running double roller carriage, based on the Altendorf system, is part of the standard equipment, as are the digital height and tilt displays. This machine is equally suited for beginners and professionals alike. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Prepared for retrofitting of a scoring unit ----- Technical Data ----- Swivel range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade diameter: 315 mm Max. projection of saw blade: 104 mm Iajdpfxsu R S Hce Aa Ujr Non-CE version: max. saw blade diameter: 350 mm, max. saw blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speed: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood optional - - New demonstration machine -

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Ijdjrigxyspfx Aa Ujar Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: rabljeno, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit. ----- Functional features: Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles. The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption. ----- Construction features: Structure Robust steel frame, coated with high-strength, water-soluble paint. Machine body made of hot-sealed, thick polypropylene panels. Four independent chambers for entry, flooding, air-blow, and exit. Horizontal feed of workpieces By means of motor-driven plastic rollers with grooves. Electronic frequency inverter for controlling and varying feed speed. Iedpfxonl Nqqs Aa Usar Transmission The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance. Moving parts are protected by cover plates and appropriate seals. Recirculation pump Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF). Air nozzles A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for adjusting feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3-6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between entry and exit rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be flooded mm 250 Max. width of workpieces to be flooded mm 300 Max. height of workpieces to be flooded mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinsing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Iasdpfedqzcxjx Aa Usr Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -