Hladilni sušilnik

Mark MDX 5200

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX Cgjdpfjyk I U Aox Agqow directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cascade control with frequency converter handover: Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Cgjdpfsvvizkox Agqow

Stanje: dober (rabljeno), Leto izdelave: 1984, Special offer!!! Cedod Da Nnspfx Agqjgw Wood-fired boiler from Mawera, model FU300 R with 350 kW output. Combustion chamber, heat exchanger, pipework, boiler with auger feeder, rotary valve, ash removal with filter, fan, control system, complete documentation, etc. Inspection possible at any time in Hungary. Already dismantled!

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm ± 20 mm - Operator side: left - Spray gun drive: single version - Dry extraction system - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable: 1.5 – 7 m/min - PLC control with touch screen - Number of installed spray devices: 0 pcs. - Height-adjustable spray devices - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,450 mm Cjdov N D Ewepfx Agqegw - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: ~7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with an offer for assembly and commissioning of the system, as well as training for your personnel. On request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Paint/Spray Booth !! This is a brand new machine directly from the manufacturer, we are the producers, photos shown are from previous customer installations !! Professional paint/spray booth Reinox 300×235, ideal for medium-sized parts and serial production. Designed for use in explosion hazard environments (EX certification), it offers high extraction performance, efficient three-stage filtration, and reliability in continuous operation. Technical specifications: - Fan certified for ATEX zone 22 - Extraction area: 3000 × 1900 mm - Overall dimensions: 3100 × 2350 × 1910 mm - Dimensions without fan and control panel! - Fan power: 3 kW (ATEX design) - Fan suction capacity: 16,000 m³/h (max. 1,100 Pa) - Lighting: 2 × 36 W, ATEX certified - Power supply: 400 V, 3-phase Frequency inverter: for stepless fan power regulation using a potentiometer on the control panel. Filtration: three-stage system Certification and documentation: CE, EX/ATEX, complete technical documentation Warranty: according to standard (12 months) Cgodpfx Ageia Taueqsw !!! Machines can be custom-ordered in various individual configurations and sizes !!! Please do not hesitate to contact us.

Leto izdelave: 2012, stanje: dober (rabljeno), Medium-pressure conveying system for wood chips Cgjdpfx Ageb Uyizsqjw Approx. 4 tons per hour Conveying line originally 180 m, 150 mm diameter, partially available Air capacity approx. 2,350 m³/h Motor power: IEC three-phase motor, 55 kW Protection rating: IP54 1 housing made of high-quality cast iron, equipped with two axially parallel and centrally arranged, dynamically balanced rotary pistons, featuring hardened and ground, helical precision timing gears, each mounted in rolling bearings. Drive via V-belts, including both pulleys and associated high-performance narrow V-belts, as well as a safety guard. 1 drive unit with motor tension rails, shaft connection using user-friendly taper-lock bushes, all mounted together on a common base frame. 1 combined intake filter-silencer (absorber silencer) 1 resonance-absorber pressure silencer, designed as base frame 1 base frame 1 pressure valve 1 non-return valve 1 flexible coupling sleeve with clamps 1 pressure gauge 1 set of vibration isolators with mounting bolts 1 electronic pressure monitoring system consisting of pressure transmitter and display unit with an electric output signal 1 sound insulation hood made of galvanized sheet steel, with oil drip pan and top coating in RAL 5001, modular construction with internal lining and forced ventilation, blower wheel driven by blower shaft. The soundproof hood is suitable for outdoor installation.

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, trajanje garancije: 24 meseci, temperatura: 80 °C, potreba po zraku: 36.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 345 kW (469,07 KM), moč: 40 kW (54,38 KM), gorivo: utekočinjeni naftni plin (LPG), poraba energije: 40 kWh, izolacijski material: Mineralwolle, debelina izolacije: 50 mm, nazivna moč: 345 kW (469,07 KM), Oprema: osvetlitev, MAIN SPECIFICATION Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. All processes inside the booth are managed via a PLC system, ensuring consistent adherence to set values. OPERATING PRINCIPLES OF THE BOOTH Processes inside the booth are controlled via an operator panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn from outside, passed through front filters, and directed into the plenum chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters before being released. FLASH-OFF PROCESS Cgodpswzmcbefx Agqjw After painting, the booth continues to run for approximately 15 minutes to extract residual solvents and thinners. During this phase, fresh air from outside continues to circulate within the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and supplied into the booth through a distribution system. As approximately 20% of the solvent is released during drying, it is expelled together with this air. Industrial coatings are typically cured at 60°C, but booth temperature can be adjusted via the operator panel as needed. COOLING PROCESS After the 30-minute drying phase, the heating coil is deactivated from the operator panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of all machinery and equipment inside the booth. The panel is made of durable galvanized sheet metal and steel sections and is fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel contains essential components such as circuit breakers, fuses, signal lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for the command and control connections between the control panel and motors or other electrical equipment. • Electrical wiring is designed to allow for relocation of the booth if required. • Operating equipment uses 380 V 50 Hz, while control devices use 220 V. • The booth operating time can be monitored on the electronic panel for easy maintenance tracking. • Temperature and timer settings for flash-off, intermediate drying, and final drying can be easily programmed to the required values on the electronic control panel’s digital display. • Users can monitor and adjust drying times via the heating thermostat and timer relay.

Leto izdelave: 1990, stanje: dober (rabljeno), I am selling a MAKA door manufacturing machine Cgedpfxsgiwl Do Agqjw Year of manufacture: 1990 Combined oscillating slot drilling and drilling machine. Available for immediate sale.

Stanje: rabljeno, Leto izdelave: 2004, 2 rezila Samodejni dvig Pnevmatski pritiskači Cgjdpsxzpwlefx Agqow Nastavitvene ustavitve 380V

Stanje: rabljeno, Leto izdelave: 2005, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm ± 20 mm - Operator side: right - Price for overhauled machine - Spray gun drive: Duo version - Height-adjustable spray units - Dry extraction - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: approx. 6,500 m³/h - Paper belt conveyor system - Feed speed steplessly adjustable: 1.5 - 7 m/min - PLC control with touchscreen - Number of installed spray units: 0 pcs. Cgodpfxexnbhvj Agqew - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,300 mm - Width: 3,360 mm + 1,850 mm - Height: 2,700 mm - Total connected load: approx. 7.1 kW / 28.6 A - Voltage, frequency: 400 V / 50 Hz - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also offer you installation and commissioning of the system, as well as staff training. On request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!