Stroj za ravnanje cevi / ravnanje cevi

MAIR / BRONX etc.

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), Manufacturer: various (European Union) Year of manufacture: 2000 Tube diameter: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length at infeed: 4 – 10 m Tube length at outfeed: 4 – 8 m Klsdpfemqkt Tox Af Njl Bundle weight: max. 3,000 kg Bundle diameter: max. 600 mm Working direction: left → right Line configuration: • Tube bundle loading station I with separation unit MAIR • Tube straightening machine (10 rolls) BRONX Model 10Cr.6-BWS • Tube bundle loading station II with separation unit MAIR • Wet separator HANDTE • Tube bundle loading station III with separation unit MAIR • Tube inspection line (eddy current/ultrasonic) ATM/KRAUTKRÄMER/FÖRSTER • Multi-head sawing system MAIR Model MC150/7/10 • Tube end finishing machine MAIR • Brushing machine MAIR • Discharge/loading MAIR • Tube bundle loading station MAIR • Tube strapping system MAIR/ORGAPACK • Emulsion processing unit SCHOENAUER • Siemens S7 control system • Hydraulic system

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. Kljdohzbipspfx Af Nel - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), Manufacturer: Various (European Union) Year of manufacture: 2000 Tube Ø: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length (infeed): 4 – 10 m Tube length (outfeed): 4 – 8 m Bundle weight: max. 3,000 kg Bundle Ø: max. 600 mm Working direction: left → right Line configuration: • Tube bundle loading station I with separation MAIR • Tube straightening machine (10 rolls) BRONX Type 10Cr.6-BWS • Tube bundle loading station II with separation MAIR • Wet separator HANDTE • Tube bundle loading station III with separation MAIR • Tube testing line, eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • Multi-head saw line MAIR Type MC150/7/10 • Tube end finishing station MAIR • Brushing machine MAIR • Outfeed/Infeed MAIR • Tube bundle loading station MAIR Kodomqkuuopfx Af Noll • Tube bundling system MAIR/ORGAPACK • Emulsion preparation unit SCHOENAUER • Siemens S7 control system • Hydraulics

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 470.000 km, moč: 478 kW (649,90 KM), prva registracija: 02/2016, vrsta goriva: dizel, velikost pnevmatike: 385/65R22.5, konfiguracija osi: 6x2, medosna razdalja: 3.200 mm, gorivo: dizel, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: zrak, skupna dolžina: 4.000 mm, skupna širina: 2.550 mm, skupna višina: 6.700 mm, Leto izdelave: 2016, Transmission: Automatic Number of gears: 12 Transmission model: Volvo I-Shift / 12-speed overdrive gearbox / 3100 Nm / Retarder (incl. cooler) Color: Blue Number of cylinders: 6 Wheelbase: 320 cm Manufacturer: Volvo Model: FH 16 650 6x2 Chassis number: YV2R002C6GA786900 Year: 13-02-2016 Odometer: 470,000 KM Engine: 650 HP / Diesel / 16.1L / 6 cylinders / EURO 6 with SCR / VEB+ Transmission: Volvo I-Shift / 12-speed overdrive gearbox / 3100 Nm / Retarder (incl. cooler) Rear axle ratio: 3.67 Front axle: 8,000 kg / Conventional suspension / Tyres 385/65R22.5 Second axle: 10,000 kg / Air suspension / Driven / Tyres 315/80R22.5 Tag axle: 7,500 kg / Air suspension / Liftable / Tyres 315/80R22.5 Wheelbase: 3,200 mm GVW: 27,000 kg GCW: 60,000 kg Features: Fuel tank: 365L + 405L AdBlue tank: 65L 24 volt, Electronic, ABS/EBS connection PTO hydraulics 2.0 inch Jost JSK 37 fifth wheel Pneumatically adjustable sliding frame Bull bar with 5 lamps Orange warning lights Bi-Xenon headlights LED rear lights Lane keeping assist Load indicator Cabin: Multifunction steering wheel Cruise control Sun visor Storage boxes 2 x Bed Extra insulation layer Roof hatch Luxury sleeper control panel Refrigerator 33L = Further information = Transmission Transmission: Volvo I-Shift, 12 gears, automatic Axle configuration Front axle: Tyre size: 385/65R22.5; Max. axle load: 8,000 kg; Steered Rear axle 1: Tyre size: 315/80R22.5; Dual wheels; Max. axle load: 10,000 kg; Reduction: hub reduction axles; Suspension: air suspension Rear axle 2: Tyre size: 315/80R22.5; Dual wheels; Lift axle; Max. axle load: 7,500 kg; Suspension: air suspension Weights Payload: 60,000 kg GVW: 27,000 kg Condition Technical condition: very good Visual condition: very good Damage: none Financial information Price: On request Klodpfx Afouu Hcxj Nsl

Stanje: skoraj kot novo (rabljeno), premer struženja: 1.500 mm, MAXIMUM WORKING DIAMETER: 1600 mm. MAXIMUM WORKING LENGTH: 3000 mm. SPINDLE DIAMETER: 83 mm. Kodor Ui R Nopfx Af Nsll OUR MACHINE IS FULLY OPERATIONAL AND PROBLEM-FREE. ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION.

Stanje: dober (rabljeno), Offering freezers for deep-freeze production. Various spare parts available. Motors were replaced only two years ago. Fully functional. Ksdpfx Ast I Eycof Njll Pick-up only in 93437 Furth im Wald. Sale without warranty, guarantee or return.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1276, CNC vroče radialno kovanje GFM SX-13 Leto izdelave: 1974 / 2022 Nova krmilna enota PLC SIEMENS S7 Številka stroja: 1276 Število kladiv: 4 Kovalna sila posameznega kladiva: 160 ton Število udarcev kladiva na minuto: 700/min Dolžina kladiva: 240 mm Območje nastavitve premera: 80 mm Največji premer za kovanje: - Konstrukcijsko jeklo, okrogel prerez: Ø 130 mm - Kvadratni prerez: Ø 115 mm Najmanjše dimenzije za kovanje: Ø 25 mm Maks. hod manipulatorja A: 6820 mm Maks. hod manipulatorja B: 7150 mm Največja dolžina obdelovanca: 6000 mm Hitrost manipulatorja pri hitrem pomiku: 400 mm/s Skupna priključna moč: 300 kW, 380 V, 50 Hz Dimenzije stroja: Višina kovanja nad tlemi: 615 mm Skupna višina stroja nad tlemi: 1665 mm Skupna dolžina stroja: 32.670 mm Skupna dolžina temeljev: 33.400 mm Skupna širina stroja (brez pomožne opreme): cca 3885 mm Ksdpfxeq U R T Ne Af Nsll Skupna širina temeljev: 16.000 mm Skupna masa stroja: 84.000 kg

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 0000, Ponudba obnovljenih FAT stružnic TUR 630 x 2000 ali 630 x 3000 Stroji dobavljivi 3 – 4 mesece po naročilu Dodatna oprema po želji stranke SEZNAM ZALOGE NOVIH BISON VPAJAL Vpajala v originalnih lesenih škatlah ===== 1 X 4344-630-8 1 X 4344-315-11 Kljdpfx Afonqzaie Njl 1 X 4334-630-8 1 X 4334-500-6 1 X 3204-160 1 X 4305-800 (ČELJUSTI) 1 X 3244-400-8 1 X 3544-400-11 3 X 4344-400-6 1 X 3704-250-6 1 X 4344-250-6 1 X 3514-250-6 1 X 3744-400-11 1 X 3704-400 1 X 3544-400-8 1 X 3245-400-8 2 X 4334-400-8 2 X 4344-400-8 1 X 3434-315-8 1 X 4344-200-6 1 X 3704-315 1 X 4344-250-8 1 X 3204-200 1 X 3234-200-5 Vedno preverite, ali je še na voljo! Dobava: EXW – NL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Weiler E50 x 1000 Precision Lathe (2003) Kjdpfxexd Tikj Af Nsll Manufacturer: Weiler Model: E50 x 1000 Year of manufacture: 2003 Condition: Good, used, under power Operating hours: 43,000 h Technical data: See images. Scope of delivery: - Original documentation - Rota S Plus 250-62 - Steady rest - Parat 4-position tool turret

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2023, EN: For sale: a complete and operational steel sheet roll forming line for coil material such as Magnelis, configurable for various profiles (e.g., C-type) used in photovoltaic installations and farms, steel structure halls, shelters, as well as in furniture manufacturing, etc. The line, including decoiler, is installed in a heated hall under near-laboratory conditions. It is possible to run a test operation before purchase. I have contacts for companies supplying custom profiling roller sets for specific profiles and for firms specializing in machine upgrades and expansions. Kledpfx Asu A U Utef Nsl For more information, please call. I do not respond to written messages. A VAT invoice will be issued for the production line.