Weiss Komora Za Testiranje Temperaturnih Šokov, 60 Litrov nakup rabljenega (91.806)

Stanje: zelo dobro (rabljeno), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature change testing (e.g. according to IEC, MIL‑STD, JEDEC standards) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 litres Internal dimensions (basket/test chamber, W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: −72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min In single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Homogeneity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lift System Basket/lift system load: 20 kg maximum load capacity Transfer basket secured by protective grid on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A External fuse: 32 A Refrigerants R-404A / R-23 Weight: 800 kg Dcjdpfxexr A R To Ac Nsh For your security as the buyer, the following procedures are performed on every chamber we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), RS Simulators Type: ST2K320/45 Water-Cooled Shock Test System Operating Climate Range Temperatures in Upper Test Chamber: Temperature range: +40 °C to +180 °C Temperatures in Lower Test Chamber: Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test Chamber Dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical Supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A / 2.5 kg Weight (Chamber): approx. 850 kg For your security as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Dodpfx Aotqcu Eec Njch Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data, all information is non-binding!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), RS Simulators Model: ST2K320/45 K Water-cooled shock test chamber Temperatures in upper test chamber: Temperature range: +40 °C to +180 °C Temporal deviation: ±0.8 K according to DIN 50011 with empty chamber Temperatures in lower test chamber: Temperature range: -40 °C to +100 °C Temporal deviation: ±0.8 K according to DIN 50011 with empty chamber Dcjdpfx Astrf Ulec Njh Humidity in upper test chamber: Climatic temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (±2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical supply: Total power: 13 KVA Current draw: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber weight: approx. 950 kg Important information for you as the buyer for your safety! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in technical data and specifications excepted!) We will be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Liebisch SKBWF 1000 A-TR Corrosion Testing Device Manufacturer: Gebr. Liebisch GmbH & Co. KG Model: SKBWF 1000 A-TR Corrosion testing chamber / salt spray chamber for salt spray, condensation water, and combination testing. Technical Data Test chamber volume: approx. 1,000 liters External dimensions: approx. 2,600 x 1,120 x 1,210 mm Internal dimensions: approx. 1,535/1,425 x 800/780 x 660/650 mm Maximum sample load: 10 kg per tier Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Performance data according to nameplate: S Watt: 2,800 W K Watt: 2,150 W B Watt: 500 W W Watt: 1,700 W Test solution reservoir: approx. 150 liters Dcsdpfx Acszba N Te Neh Distilled water consumption humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling (base trough system): approx. 15 liters Test Standards DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control system Touch panel / control panel GRP (glass-reinforced plastic) test chamber Sample racks Sample holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used machine from industrial operation. Visual condition as per images. Interior with visible deposits / traces of corrosion. Device can be switched on, display is active. A complete technical function test under test conditions has not been carried out by us. Inspection possible by appointment. Scope of delivery: see images. Loading can be arranged. All details provided to the best of our knowledge based on available documents, nameplates, software displays, and datasheets. Errors and changes excepted.

Stanje: zelo dobro (rabljeno), Memmert Model: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber manufactured by Memmert, model CTC 256. This unit comes from professional use and is ideally suited for laboratories, industry, research, development, and quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climate conditions. It allows for both cooling and heating processes and – in this configuration – humidity control. This makes the device perfect for material testing, aging tests, climate stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated controller, complex testing programs with specific temperature and time profiles can be configured. The forced air circulation system ensures even temperature distribution within the chamber. Via the available interfaces, measurement data can be logged and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity regulation Electronic controller with program functions Forced air circulation for even temperature distribution Internal protocol memory USB and Ethernet interfaces 230 V auxiliary socket Cable port (side) Water tank system (humidification/condensate) Mounted on castors/mobile Technical data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Dsdpfoy D Ni Aex Ac Nsch Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see picture) Memmert CTC 256 Climate Test Chamber Insertion shelf Water canister Documentation Delivery as shown (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: generalkompletno obnovljen (rabljeno), 60 m³ / 60,000 L Firefighting Water Tank According to DIN 14230 Tank volume: 60,000 litres / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel, grade S 235 JRG 2 Underground tank for subterranean storage, single- or double-walled, suitable for pedestrian and drive-over areas (load class SLW 30) with 1 manhole (external diameter 720 mm), equipped with blank cover, gasket and bolts. Available immediately either new or used! The tank is emptied, cleaned, refurbished and professionally leak-tested by our certified workshop. The tank complies with the requirements of DIN 14230 (Underground Firefighting Water Tank): - Firefighting water suction connection in accordance with DIN 14244, fitted with a fire brigade coupling / fixed coupling type A as per DIN 14319, design type B, without level gauge - Ventilation flange nozzle NWN 100 with cap, overall length approx. 1,300 mm, suitable for 800 mm underground coverage and 500 mm above ground - Exterior protected by bitumen coating - Upon request, we can provide an internal full lining with bitumen-based or epoxy resin coating (for corrosion protection) Dedpshh Sruofx Ac Noch - It is also possible to fit the tank with an internal plastic liner Cost-effective delivery with our own truck is available. Simply provide your delivery location and you will immediately receive the exact freight costs. Inspection by appointment is possible at any time. If you need further information, please call us or send an e-mail to b.barth(at)barth-tank.de We also accept trade-ins and purchase tanks/containers of all kinds. Please contact us for details. We always have tanks of similar types in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Stanje: zelo dobro (rabljeno), Here we offer you a temperature test chamber. Water-cooled Technical performance data: Temperature working range Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm Dcjdpfxjygupro Ac Nsh External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerants: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your security as a buyer, please note the following information! The following actions are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refilled with compliant refrigerant according to regulations 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see pictures) (Subject to modifications and errors in technical specifications and details!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Primus Engineering Type: DST 350 This test facility was designed for conducting IP protection class tests "dust" according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test facility is intended for testing technical components under the influence of dust and vacuum within the limits specified in the technical data. Operation / HMI Djdpjrt U Nuefx Ac Nech Control panel with display and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 KW Supply voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% r.h. to 75% r.h., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Liebisch Type: S 1000 A-TR / 42016211 Chest-type apparatus with 1000 liters test chamber volume for salt spray tests. Constamatic® TR This series includes fully automatic chest-type devices of the A-TR type. Device operation is controlled via a touchscreen. All functions are displayed on a touchscreen with an intuitive user interface. Technical Data: Device type: S 1000 A-TR External dimensions (W x D x H in mm): 2600 x 1120 x 1210 Djdpswf Dh Njfx Ac Njch Test chamber internal dimensions (W x D x H in mm): 1535/1425 x 800/780 x 660/650 Max. load capacity per sample rack: 10 kg per level Operating voltage: 230 V +6/-10% Connected load S: 2700 W Humidity control range S: up to / 70°C Test chamber temperature range K: up to / 50°C Test chamber temperature range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution reservoir: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 – 1.0 liters Water basin capacity, bottom tray KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Temperature shock test chamber, water-cooled Two-chamber design Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Dcodpfx Aoigg Hnoc Noh Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions (W x D x H): 470mm x 650mm x 410mm External dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port diameter: 67mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and error!) If you have further questions, we are happy to answer them by phone.

Stanje: rabljeno, Weiss Type: TS 130 Temperature Shock Test Chamber, Water-Cooled Specification: - Temperature range hot chamber: +60°C to +220°C - Temperature range cold chamber: -10°C to -80°C - Transfer between hot/cold chamber: 10 sec. - Temperature stability: ±1 K Dimensions and further data: - External dimensions: Height 1990 mm - Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm - Depth (without and with test chamber door): without approx. 900 mm / with approx. 1155 mm - Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Dsdpsvwckhsfx Ac Nech - Volume: 130 liters - Maximum test chamber load: 20 kg - Maximum floor load in test chamber: 20 kg - Cooling water pressure: min. 2 ... max. 6 bar - Max. circuit protection: 35 A (plug 32 A CEE) - Sound pressure level, 1 m in front of unit: approx. 65 dB(A) - Refrigeration cascade, water-cooled - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerants: R404A / R23 - Weight: approx. 950 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: ENZ 6CAL, Oprema: CE označba, Rabljena, delujoča klimatska komora ESPEC ESX-2CA, zračno hlajena. Čeprav ima ta model funkcijo vlažnosti, je ta izklopljena, zato deluje le kot temperaturna komora, z razponom od -70°C do +150°C. Hitrost hlajenja je 4,0°C na minuto. Notranje dimenzije (Š, G, V): 500 mm, 600 mm, 750 mm. Komora je opremljena s kalibracijo. Dodpfjwy Uq Rex Ac Nsch

Stanje: zelo dobro (rabljeno), Weiss Model: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to +150°C Chamber volume: 34 liters Feedthroughs included in standard configuration: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Performance Data for Temperature Testing: Temperature range: -60 to +150 °C Temperature variation in stabilized state (per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial temperature deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Performance Data for Climate Testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (in stabilized state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.h. Operating Data: Test chamber lighting: Halogen bulb 12V, 20W Nominal voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Nominal power: 2.5 kW Nominal current: 11 A Required customer-side fuse: 16A slow-blow Heat dissipation for air-cooled chambers: Max. heat emission to environment: 1700 W Refrigerants: R-452A / R23 Weight: 140 kg Dcedpfotr Dinex Ac Neh For your safety as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors, all details are non-binding!) If you have any further questions, we are happy to answer your calls.

Stanje: rabljeno, Leto izdelave: 2015, Pfeiffer LTS-KKB/120 Helijeva testna komora za puščanje (2015) 3x400V/50Hz/3x100A Dcsdpfx Acoy Uxncs Noh Teža: 7700 kg

Stanje: rabljeno, Leto izdelave: 1994, Sušilna komora / Krožna sušilna komora / Komora za sušenje lesa / Sušilna naprava Mühlböck QLSF Zunanje dimenzije: Dolžina: 10,3 metra Širina: 4,2 metra Višina: 4,15 metra Notranje dimenzije: Dolžina: 10,1 metra Širina: 3,01 metra Dsdpfx Acey Tt Eas Nech Višina: 4,0 metra Tehnični podatki: Leto izdelave: 1994 Temperatura dovoda: 95 stopinj Ventilatorji: 7x0,75 kW Takoj na voljo Lokacija: Avstrija, v bližini Ried im Innkreis

Stanje: rabljeno, Leto izdelave: 1995, Sušilna komora / Krožna sušilna komora / Komora za sušenje lesa / Sušilna naprava Mühlböck QLSF Zunanje mere: Dolžina: 13,3 metra Dcedey Tt Axopfx Ac Neh Širina: 4,2 metra Višina: 4,15 metra Notranje mere: Dolžina: 13,1 metra Širina: 3,01 metra Višina: 4,0 metra Tehnični podatki: Leto izdelave: 1995 Ogrevalna moč: 205 kW Temperatura dovoda: 90 stopinj Količina vode: 16 m³/h Ventilatorji: 9x0,75 kW Takoj na voljo Lokacija: Avstrija, v bližini Ried im Innkreis

Leto izdelave: 2013, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1735-13-1, Na prodaj je rabljena mokra peskalna kabina proizvajalca Coskun Engineering. Stroj je popolnoma delujoč in se prodaja, ker potrebujemo prostor za novo napravo. Dodpfezbq A Rsx Ac Njch

Stanje: zelo dobro (rabljeno), Premer kolesa - maks. 200 mm Širina kolesa 300 mm Modul 0,5 - 25 Razdalja med konicami 750 mm Dodpfey Umi Isx Ac Nsch Teža stroja cca 0,2 t Potrebni prostor cca 0,8 x 0,6 x 0,6 m Naprava za preizkušanje polžev Preverja se: oblika bokov, kot tvorbe bokov, delilna razdalja osi, višina vzpona, širina zobne reže, višina zoba, tek v bokih.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tank za shranjevanje tekočin. Vključuje pregledna vrata in nivo za polnjenje (v celoti iz nerjavečega jekla). Na voljo imamo še 3 enake tanke po ceni 300 evrov za kos. Dedpfxsy Uv D Uj Ac Nsch

Stanje: dober (rabljeno), Weiss SC 450 Corrosion Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion test chamber / salt spray test chamber for salt fog tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray channel: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range for salt spray test: 5 K above ambient temperature up to +50 °C Temperature range for condensation water test: 5 K above ambient temperature up to +45 °C Temperature constancy (over time): ±1 K Brine tank: approx. 180 liters Compressed air: min. 4 bar / max. 10 bar Weight (empty): approx. 180 kg Electrical Data Dodpfx Aezbatrjc Noch Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic nozzle in spray channel Heated compressed air humidifier Flow and dosing unit for brine Brine storage tank Test specimen holders / support tubes Floor grate Measurement and connection ports Test Methods Salt spray test in accordance with DIN EN ISO 9227 / DIN 50021 Condensation water test in accordance with DIN EN ISO 6270-2 / DIN 50017 Condition Used machine from industrial application. Operating hours according to display: approx. 37,926.6 h Visual condition as per photos. Interior shows visible deposits and signs of corrosion typical for used equipment. Unit powers up, display is active. A complete technical function test under testing conditions has not been performed by us. Inspection and testing on site by prior arrangement is possible. Delivery scope: see photos. Loading can be organized. All information provided to the best of our knowledge based on available documentation, name plates, software displays, and manufacturer data. Subject to errors and prior sale.

Leto izdelave: 2025, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, PROBST čistilna naprava za tlakovce EASYCLEAN EC-60 — letnik 2025 Dcedpfxey A E N Ao Ac Nsh Rabljeno, iz profesionalnega najemnega parka podjetja Kurt König Baumaschinen GmbH, Einbeck. Stanje in opombe: - Stanje: Rabljeno iz najema, redno vzdrževano - Delovanje: Popolnoma delujoče - Fotografije izdelka bodo sledile — za aktualne slike nas prosim kontaktirajte - Ogled možen v 37574 Einbeck po dogovoru Cena 3.300 EUR + DDV | EXW Einbeck | Dostava po dogovoru

Leto izdelave: 2023, stanje: novo, Kompaktne betonske mešalne postaje SEMIX so zasnovane za omejene prostore in enostaven transport v tujino. Dedpfx Aega D E Ijc Njch SEMIX Compact 60 je mogoče prepeljati v dveh zabojnikih in popolnoma sestaviti v treh dneh. SEMIX Compact 60 je opremljen z betonskimi mešalniki kapacitete 1500/1000 litrov, ki so lahko z eno gredjo ali planetarni tip. Pri SEMIX betonskih mešalnikih so obrabni deli iz NiHard4 ali Hardox 450 jekla, izbira pa je odvisna od vsebnosti silicija v betonski recepturi. Vsi zalogovniki agregatov SEMIX so ukrivljene trapezne oblike, kar zagotavlja dodatno trdnost. Robustna jeklena konstrukcija omogoča dolgo življenjsko dobo. Agregati se tehtajo na tehtalnem transporterju, ki jih prenese v transportni mehanizem. Kompaktne betonske postaje SEMIX nudijo različne možnosti prenosa agregatov. Tudi pri kompaktnih postajah imajo uporabniki možnost izbire dvigala z vedrom (skip hoist) ali transportnega traku za prenos agregatov. Vse betonske postaje SEMIX so vodene s SCADA sistemom z integriranim Schneider PLC-krmilnikom. Uporabniki lahko spremljajo vso uporabljeno materialno evidenco in povežejo svoj CRM sistem. Inženirska ekipa SEMIX lahko int...

Stanje: rabljeno, Features: * Used roller conveyor transfer unit by manufacturer Overbeck * Feet must be ordered separately * Condition: fully functional with signs of use * Ideal for rapid material transport * Professionally dismantled and packaged * Interroll motorized rollers * 2 SEW motors * V-belt drive * Max. package width for transfer: 68 cm * 2 units in stock * Price per unit Transfer Unit Transfer units with chain or belt gently lift the conveyed goods and deposit them softly onto the target conveyor. For this, both lines must briefly stop during the lifting and setting down processes. Technical Data: Roller Conveyor Dimensions Total length: 2000 mm Total width: 600 mm Segment length: 750 mm Roller Information Insertion length: 450 mm Diameter approx.: 50 mm Axle spacing: 100 mm Material: galvanized steel Frame Information Frame height: 135 mm Frame width: 30 mm Dedpfodidvcox Ac Noch Material: steel Customized Solutions for Your Intralogistics Whether for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods—we are your competent partner! We are happy to provide you with an individual quotation or advise you on planning and installation. Simply inform us of your requirements and site conditions. Benefit from our many years of experience and our excellent network of experts. We have successfully realized projects for companies in a wide range of industries such as logistics, pharmaceutical, trade, and electronics. Together, we will develop ways to optimize your workflow and material flow cost-effectively and sustainably. We can also offer you fully automatic sorting technology or supplementary components such as order picking racks or bins.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PM3, Universal Testing Machine PM3 (2026) Force: 3 kN Crosshead Travel: 520 mm Test Space Depth: 66 mm Overall Height: 1036 mm Weight: approx. 40 kg Displacement Resolution: 0.01 mm Testing Speed: 1-500 mm/min Return Speed: 700 mm/min Dsdpfx Ajyc U Dbec Nsch Load Cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for 'quick testing' without the need for a PC. For tests that require data storage and curve recording, our basic software offers the ability to control and evaluate tests. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to further process the raw data in your own programs. Options: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Universal Testing Machine PM3 Force: 3 kN Crosshead Stroke: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 40 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 3 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for "quick tests" without a PC. For tests that require data storage and curve recording, our basic software offers you the functionality for control and evaluation. This enables the creation of various test sequences and the generation of a test report. You also have the option to further process the raw data in your own software applications. Dcjdpfxed R Dpuj Ac Noh Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and Fixtures: Compression platens, bending fixtures, shear testing devices, wedge grips, scissor grips, peel grips, screw grips, pneumatic grips, and hydraulic grips.