Weinig Opticut 350–4 R nakup rabljenega (99.037)

Stanje: rabljeno, Optimizacijska linija Proizvajalec: Weinig Model: OptiCut 350–4 R Ksdpfx Aloy Dri Es Nsdk Leto izdelave: 2001 Država izdelave: Nemčija Popolno z vstopnimi in izstopnimi mizami

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Kdjdpfx Asw Sy T Hel Nsk Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: rabljeno, Complete production line for manufacturing slatted frames (bed bases). From wood processing all the way to final assembly/packaging. Includes all components, such as milling machines, saws, profiling machines, forklifts, compressors, etc. The larger machines/systems are from around the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multiple-blade saws RAIMANN KR 450 + KS 310 - Optimizing saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing Longitudinal Rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC Drilling and Sawing Machines: - KOCH drilling and sawing line with turning and stacking system - ISE CNC drilling and sawing system with stacking unit - 2 x ISE CNC woodworking centers / drilling systems - ISE CNC cross rail milling machine - 2 x Manual rail drilling machines Single Machines: - GANNOmat CNC drilling and dowel insertion machine - Panhans spindle moulder Kdsdjx S Scbspfx Al Nsk - 2 x EiMa double saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combined saw-milling machine - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Assembly automation for standard slatted frames - End cap pressing machine/line - 14 x pneumatic assembly tables Logistics – Factory Equipment - 3 x LINDE forklifts E16 / E20 - 7 x LINDE high-lift/ electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system for outdoor area - Batch of mesh box pallets + Euro pallets - Racking systems, various Packaging - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Goods - Remaining stock of wood/cross rails - Remaining stock of end caps/plastic parts - Remaining stock of various assembly material Many more PHOTOS and detailed DATA available upon request.

Stanje: rabljeno, Leto izdelave: 2000, Complete production line for manufacturing slatted frames (bed bases). Kodsx S Sb Dspfx Al Nsdk From wood processing all the way to final assembly/packaging. Includes all components, such as milling machines, saws, profiling machines, forklifts, compressors, etc. The larger machines/systems are from around the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multiple-blade saws RAIMANN KR 450 + KS 310 - Optimizing saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing Longitudinal Rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC Drilling and Sawing Machines: - KOCH drilling and sawing line with turning and stacking system - ISE CNC drilling and sawing system with stacking unit - 2 x ISE CNC woodworking centers / drilling systems - ISE CNC cross rail milling machine - 2 x Manual rail drilling machines Single Machines: - GANNOmat CNC drilling and dowel insertion machine - Panhans spindle moulder - 2 x EiMa double saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combined saw-milling machine - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Assembly automation for standard slatted frames - End cap pressing machine/line - 14 x pneumatic assembly tables Logistics – Factory Equipment - 3 x LINDE forklifts E16 / E20 - 7 x LINDE high-lift/ electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system for outdoor area - Batch of mesh box pallets + Euro pallets - Racking systems, various Packaging - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Goods - Remaining stock of wood/cross rails - Remaining stock of end caps/plastic parts - Remaining stock of various assembly material Many more PHOTOS and detailed DATA available upon request.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Dimter Optimizing Crosscut Saw 350 with increased working height 1400 mm Cross feed as shown in pictures Kdjdencc Icjpfx Al Njk Crosscut saw Control cabinet Scanner interface Sorting line 6500 mm length with 3 pushers Waste flap Machine has already been dismantled and is immediately available Machine was fully functional until dismantling Transport can be organized

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Dimter / Weinig OptiCut 350 Cross-Cut Optimizing Saw Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine Description: For sale is a Dimter / Weinig OptiCut 350 cross-cut optimizing saw, year 2004, designed for fast and precise cross-cutting of wood with integrated optimization functionality. The OptiCut 350 model is part of Dimter's high-performance series and is used for cut-to-length applications, defect removal, and yield optimization. This machine is suitable for carpentries, sawmills, pallet production, furniture components manufacturing, and industrial wood processing. Depending on configuration, it can include optimization software, automatic infeed, loading stations, and barcode-based optimization. Technical Specifications: - Machine type: cross-cut optimizing saw - Maximum cutting height: approx. 120 mm - Maximum working section: approx. 235 x 12 mm or 120 x 100 mm - Minimum wood width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Continuously adjustable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization software: yes, depending on version - Barcode optimization: available in some configurations - Loading stations: depending on equipment ([Boedeker][1]) Features and Advantages: - High cutting capacity - Automatic material positioning - Yield optimization capability - Proven Dimter / Weinig technology - Suitable for continuous production - Effective solution for industrial wood processing Condition: Very good Kjdpfx Aeyu Uq Eol Nedk Note: Technical data may vary depending on the machine’s exact configuration, optional equipment, table lengths, and control version.

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7221 TECHNICAL DATA - Minimum / maximum workpiece width: 45 / 150 mm - Minimum / maximum workpiece height: 15 / 50 mm 3 spindles: 1) Lower horizontal 11 kW 2) Upper horizontal 22 kW (7000 rpm) 3) Lower horizontal 5.5 kW Spindle diameter: 40 mm - Spindles 1 and 3 adjusted manually (up/down, left/right) - Spindle 2 adjusted manually (left/right) - Spindle 2 adjusted electrically (up/down) - Spindles 2 and 3 equipped with brakes Top: - 3 metal toothed feed rollers - 1 twin rubber outfeed roller Kjdpfxoyy I Ayj Al Nodk Bottom: - Infeed pressure device - Ribbed worktable - Smooth metal feed roller - Electric thickness adjustment - Infinitely variable feed speed: 6–24 m/min - Feed motor: 3 kW - Feed system with Cardan shafts - Infeed table length: 1970 mm - Automatic table lubrication system - Extraction connection diameter: 1x150 mm, 2x140 mm - Dimensions (LxWxH): 3070x2000x1800 mm - Weight: 2000 kg ADVANTAGES - German manufacture - With 3 cutterheads - For processing lamellas - Ribbed worktable - Cutterheads included - Not repainted - Very good condition - Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Štiri-stranska skobeljnica WEINIG UNIMAT SUPER 4 Leto proizvodnje: 2003 TEHNIČNI PODATKI: - min / maks širina obdelovanca: 45 / 150 mm - min / maks višina obdelovanca: 15 / 50 mm 3 vretena: 1) spodnje horizontalno 11 kW Kdodpfx Aoyiviljl Nsk 2) zgornje horizontalno 18,5 kW 3) spodnje horizontalno 5,5 kW premer vretena: 40 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, V zelo dobrem stanju ponujamo skobeljni stroj Weinig Super 4 z podajalnikom EM 15, letnik 2005. Proizvajalec: Weinig Model: Super 4 Kdjdpfsylagmox Al Njk Leto izdelave: 2005 Stanje: zelo dobro Tip: skobeljni stroj Za vprašanja ali dodatne informacije nam prosimo pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, delovna širina: 150 mm, višina skobljanja: 50 mm, premer vretena: 40 mm, širina skobljanja: 150 mm, delovna višina: 50 mm, - After technical inspection - German manufacture - Year of manufacture: 2007 - Equipped with Weinig EM 15 belt feeder TECHNICAL SPECIFICATIONS: - Planing width: 150 mm - Planing height: 50 mm - Spindle diameter: 40 mm - First bottom head: 11 kW, 6000 rpm - Second top head: 22 kW, 7000 rpm - Third bottom head: 5.5 kW, 6000 rpm - Feed motor: 2.2 kW - Feed speed adjustable via inverter - Feed via cardan shafts - Four upper steel feed rollers Kjdpew E I Ruefx Al Njdk - One upper rubber outfeed roller - Ribbed table surface - Length of infeed table: 1000 mm - Automatic central lubrication - Length of feeding table: 4700 mm - Speed adjustable via inverter - Hydraulic pressure rollers - Total feeder power: 2.25 kW - Machine dimensions (L/W/H): 790 x 200 x 190 cm - Weight: 3200 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, WEINIG UNIMAT SUPER 4 Planer – German-made – Very good condition – Year of manufacture: 2004 – Operating manual (DTR) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top head 1) Bottom head: 11 kW, 6000 rpm 2) Top head: 18.5 kW, 7000 rpm 3) Bottom head: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed speed adjustable via inverter: 0-18 m/min Feed with cardan shafts Pneumatic hold-down Three hardened steel top feed rollers One rubber top feed roller Ribbed infeed table Infeed table length: 1950 mm Total power: 37 kW Central lubrication Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: ~2700 kg Ksdsin Nrgepfx Al Nedk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Optimizing Cross-Cut Saw Dimter / Weinig OptiCut 450 Quantum Manufacturer: Dimter / Weinig Kdjdpfx Aeyu Urijl Nok Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine Description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for fast and precise cross-cutting of wood with yield optimization. The Quantum version is among the most advanced in the OptiCut 450 series, developed for industrial use with very high productivity, precise positioning, and reliable material feed. This machine is suitable for cut-to-length work, defect removal, and production optimization. The OptiCut 450 series is designed for integration with scanners, grading systems, and automated handling equipment. Typical features of the Quantum version include VarioSpeed feed, HighGrip rollers, an independent length measuring system, and servo-controlled waste gate. ([jacks.co.nz][1]) Technical Data: - Capacity: up to approx. 540 cuts/min - Feed speed: approx. 300 – 415 m/min - Maximum workpiece length: approx. 6.3 m - Saw blade diameter: 450 mm - Maximum cutting width: 235 mm - Maximum cutting height: 100 mm - Working height: 900 mm - Motor: 7.5 kW - Air consumption: approx. 1200 NL/min - Cutting accuracy in the OptiCut 450 series: approx. ± 0.8 mm Features / Advantages: - Very high cutting capacity - High positioning accuracy - VarioSpeed system that minimizes gaps between workpieces - HighGrip rollers for secure material feed - Servo-driven waste gate - Can be integrated with scanners and grading lines - Proven Weinig / Dimter technology for continuous production Condition: very good Note: Technical data may vary depending on the machine’s exact configuration, control version, conveyor system, and optional equipment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Optimizirka Weinig Dimter Opticut 200 Classic – po tehničnem pregledu – leto izdelave 2004 – izjava o skladnosti, tehnična dokumentacija – izdelano v Nemčiji TEHNIČNE SPECIFIKACIJE: min./maks. vhodna dolžina elementa 800 / 3500 mm min./maks. vhodna širina elementa 80 / 200 mm min./maks. vhodna debelina elementa 12 / 80 mm tip lesa: trdi/mehki označevanje na črto klasifikacija lesa Kjdpfx Alegz Tbdo Nodk maks. podajalna hitrost 120 m/min pospešek 5 m/s premer žaginega lista 500 mm premer odprtine lista 30 mm število vrtljajev glavnega vretena 4600 min⁻¹ trajanje 1 cikla 0,7 - 1,2 s poganjan vhodni transporter in označevalna postaja s stranskimi mizami za dva označevalca trakasti transporter skupna moč 15 kW merjenje dolžine – fluorescenčna kamera za 3 razrede kakovosti izstopna postaja – transportni trak polna optimizacija skupna dolžina 8300 mm premer odsesovalnega priključka 80 in 120 mm krmiljenje OptiCom Direct napajanje 400 V / 50 Hz

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 89257, Žaga GreCon Dimter Opticut 704 L iz leta 1999. Stroj odstranjen iz obratovalne linije. Brez izmetnikov na izhodu, potreben ponoven vklop ali retrofit. Na ogled v naših prostorih. Kdodpfjtvahljx Al Njk

Stanje: rabljeno, Leto izdelave: 2006, Proizvajalec: Weinig Model: Unimat Super 4 Leto izdelave: 2006 Štiristranski skobeljni stroj Proizvajalec: WEINIG obnovljen Model: UNIMAT SUPER 4 z avtomatsko mehanizacijo kratkih obdelovancev EM15 - Leto izdelave: 2006 Tehnične specifikacije - Delovna širina: največ 150 mm - Delovna širina: najmanj 25 mm - Delovna višina: največ 50 mm - Delovna višina: najmanj 15 mm - Število vreten: 3 - Moč zgornjega vretena: 22 kW - Moč spodnjega vretena: 11 kW - Hitrost vrtenja vretena: največ 7.000 min⁻¹ - Premer vretena: 40 mm - Dolžina mize: 2.000 mm - Največja hitrost podajanja: 24 m/min - Neprestano nastavljivo podajanje - Poseben motor za vsako vreteno - Kardansko gnano podajanje valjev - Podajanje iz zalogovnika - Motorni pomik višine skobljanja Kjdpfx Alsqprk To Njdk - Avtomatska mazalna črpalka - WEINIG čelni rezkar - WEINIG EM 15 - Skupna priključna moč: 45 kW

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: omejena funkcionalnost, vrsta vhodnega toka: Klimatska naprava, največja hitrost vretena: 60.000 obr/min, Prodajamo gravirni stroj s posebno konstrukcijo in komponentami podjetja Fanuc. Kdsdpeyxp A Sefx Al Njk

Stanje: pripravljen za uporabo (rabljen), Veeder-Root TLS-350 4-vhodni sonda termistorski modul 330724-001, rabljen, z običajnimi sledovi uporabe, 100 % delujoč, dobava po slikah. Kdedpfjxaifgox Al Nok

Stanje: rabljeno, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 400 with HSK/Powerlock, axially/radially CNC-controlled ----- The machine is currently being refurbished by us! Photos before dismantling and currently during the refurbishment process! Summary: ----- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control system CNC-controlled adjustment and positioning of the feed Table plates with guide knives at spindles 2 and 3 Including Weinig/Neumann return feed system RF 15 Detailed description: ----- Technical Data: Working width: 20–230 mm Working height: 8–120 mm 1. Tool holder – bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool diameter: 93–145 mm Axial adjustment range: 5 mm Rebate device MarathonCoatin table inlay in front of 1st lower tool holder 2. Tool holder – PowerLock – right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed incl. high-performance ball bearings: 8,000 rpm Tool diameter 40 mm below table level: 93–200 mm Tool diameter 55 mm below table level: 93–180 mm Tool diameter for straight knife heads max. 163 mm Max. tool diameter behind fence level: 180 mm Max. moulding depth: 35 mm Axial adjustment range: 55 mm Spindle axial CNC-controlled Table plates with guide knife 3. Tool holder – PowerLock – left ----- Motor with brake: Shared with 2nd spindle Speed incl. high-performance ball bearings: 8,000 rpm Tool diameter 40 mm below table level: 93–200 mm Tool diameter 55 mm below table level: 93–180 mm Tool diameter for straight knife heads max. 163 mm Kodpfx Aloyy A Iqo Nsdk Max. moulding depth: 35 mm Axial adjustment range: 55 mm Spindle axial and radial CNC-controlled Table plates with guide knife 4. Tool holder – PowerLock – top ----- Motor with brake: 7.5 kW Speed incl. high-performance ball bearings: 8,000 rpm Tool diameter: 93–200 mm Tool diameter for straight knife heads max.: 180 mm Max. moulding depth: 35 mm Axial adjustment range: 40 mm Segmented pressure shoe in front of the upper tool holder, adjustable to tool diameter and swiveling away from the tool, spring-loaded. Pressure shoe before and chip removal after the upper tool holder with electronic digital displays, integrated into memory function. Spindle radial CNC-controlled 5. Tool holder – PowerLock – bottom ----- Motor with brake: 7.5 kW Speed incl. high-performance ball bearings: 8,000 rpm Tool diameter: 93–200 mm Max. moulding depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Frequency-controlled feed, steplessly adjustable with brake: 4 kW, 5–30 m/min Infeed roller in front of 1st lower tool pneumatically controlled (up/down) Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning...

Stanje: novo, Ponujam profesionalno črpalko za sodčke priznanega nemškega proizvajalca Lutz – namenjeno delu z različnimi tekočinami (kemikalije, olja, industrijski mediji). ✅ Stanje: ✔️ Novo ✔️ Ohišje motorja je bilo zamenjano z originalnim (tovarniškim) – prejšnje je bilo poškodovano med transportom ✔️ Popolnoma delujoča, pripravljena za uporabo 🔩 Tehnični podatki: Proizvajalec: Lutz Pumpen GmbH (Nemčija) Model črpalke: MP PP 50/41-R DL SS Motor: MI 4-230 Napajanje: 220–230 V / 50 Hz Moč: 450–500 W Tok: 2,5 A Zaščitni razred: IP24 Dolžina cevi: 1200 mm Material: PP (polipropilen) + nerjavno jeklo (SS) Ksdpfx Aleyzulwe Nedk ⚙️ Uporaba: industrijska kemija olja, tehnične tekočine industrija, delavnice, proizvodnja praznjenje sodov in rezervoarjev 📦 Komplet vsebuje: ✔️ Črpalka Lutz ✔️ Motor MI 4-230 ✔️ Cev + oprema, vidna na slikah 🌍 Država izvora: 🇩🇪 Nemčija ℹ️ Dodatne informacije: Visokokakovostna oprema – nemška proizvodnja Idealno za profesionalno uporabo Možnost pošiljanja ali osebnega prevzema

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7890 Technical Data: - Track width: 245 mm - Arbor width for edger: 380 mm - Arbor width for multi-blade saw: 320 mm - Max. saw blade diameter: 350 mm - Arbor hole diameter for edger: 80 mm - Arbor hole diameter for multi-blade saw: 65 mm - Max. cutting height: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm From above: - Pawls/kickback devices - Smooth pressure roller - Pawls - Smooth pressure roller - Insert for short workpieces - Saw spindle - 2 smooth pressure rollers From below: - Guide - Pawls/kickback devices - Track - Central lubrication - Laser - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 30 kW Kjdpfx Aloyitxdj Nedk - Manual body lifting - Manual lifting of saw spindle - Extraction connection diameter: 210 mm - Overall dimensions (L/W/H): 1900x1500x1800 mm - Weight: approx. 2000 kg ADVANTAGES - Made in Germany - Stepless feed speed adjustment - Floating saw blade spindle for edging - Multi-blade saw bush included - Laser - Insert for short workpieces - Used multi-blade saw, very good condition Net price: PLN 55,900 Net price: EUR 13,300 based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Stanje: zelo dobro (rabljeno), Catalog number: 7670 TECHNICAL DATA - Track width: 340 mm - Roller width: 400 mm - Max. saw blade diameter for multi-blade saw: 350 mm - Saw blade bore diameter: 80 mm - Max. cutting height for edger: 100 mm - Max. cutting height for multi-blade saw: 120 mm - Table width (clearance): 900 mm - Table length: 1780 mm - Top features: - Kickback fingers - Pressure roller, sliding, metal - Kickback fingers - Pressure roller, sliding - Shaft with saw blades - Pressure roller, sliding - Sliding pressure shaft, metal - Bottom features: - Guide bar - Kickback fingers - Track - Central lubrication - Stepless feed speed adjustment - Electric lifting of saw shaft 0.75 kW + main frame 1.1 kW - Feed drive motor 1.5 kW - Main motor 22 kW Kdjdpfoyk E Hpox Al Nsk - Floating saw adjustment motor 0.55 kW - Lasers (not working, for inspection) - Extraction nozzle diameter: 210 mm - Overall dimensions (L x W x H): 2200 x 1450 x 2000 mm - Weight: 1925 kg ADVANTAGES – German-made – Shaft with floating blade for edging – Additional sleeve for multi-blade saw included – Used multi-blade saw, condition very good Net price: 58,900 PLN Net price: 14,030 EUR (based on exchange rate 4.2 EUR) (Prices subject to change depending on exchange rate fluctuations)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Number of spindles: 4 pcs Working width: 230 mm Planing height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min Control: Memory Plus Ksdeyhfhnspfx Al Nodk Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of wood, including infeed mechanisation Weinig High Mech E 1 and outfeed mechanisation with Sicko paternoster stacker. The machine is equipped with a Memory Plus system with electronic (radial) positioning of spindles 3 & 4 and MarathonPowerCoating PLUS on the table plates. Last service by manufacturer: December 2025. The plant is still in operation and can be inspected at any time. Expected availability: from September 2026. Spindle 1: Bottom / 15 kW / 50 mm / 6,000 rpm Spindle 2: Right / 15 kW / 50 mm / 6,000 rpm Spindle 3: Left / 15 kW / 50 mm / 6,000 rpm Spindle 4: Top / 18.5 kW / 50 mm / 6,000 rpm

Stanje: novo, Leto izdelave: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, available immediately from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolt-on. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, incl. base approx. 350 cm, made of IPE160. - 12 x cantilever arms approx. 120 cm, made of IPE80. - Incl. all necessary connecting elements and bolts. Why choose BLT Cantilever Racking? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for both uprights and arms are statically verifiable at 100% load. - All racking systems supplied in hot-dip galvanized finish. Can be installed indoors or outdoors, and do not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized fastener assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright foot and upright back are welded together, offering enhanced safety and quick installation, as feet do not need to be bolted separately. - Bracing made of angle steel, eliminating the need for tension rod adjustments. This significantly reduces assembly time. - No slotted hole system, so the upright profile remains uncompromised. Ksdpfx Ajy D Swpsl Njdk Price: €2,356.00 net + statutory VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged by our partner freight forwarder upon request. Freight cost depends on postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your storage systems if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering to assembly.

Stanje: zelo dobro (rabljeno), Profesionalni hidravlični komplet priznanega proizvajalca HURST / Hale Fire Pump Co., namenjen tehničnemu reševanju (gasilci, reševalne službe). ⸻ Stanje: Rabljena oprema, popolnoma delujoča in testirana Vidne običajne sledi uporabe na fotografijah Tehnično stanje dobro – pripravljeno za uporabo ⸻ Tehnični podatki: • Model: SP 45 • Proizvajalec: Hale Fire Pump Co. / HURST • Leto izdelave: 1992 • Delovni tlak: 350 BAR • Napajanje: 230V (eno-fazno) • Standard: DIN 14751 ⸻ Komplet vključuje: • hidravlično črpalko HURST • hidravlične škarje • razpiralo • hidravlične cevi (2 kosa) • kolut za cevi • komplet hitrih spojk • transportni okvir ⸻ Uporaba: • reševanje v prometu • tehnična in rušitvena dela • reševalne službe / PGD / PIGD • industrija (razpiranje, rezanje) ⸻ Prednosti: Kdodpfxsyxr Dxe Al Njk • robustna, profesionalna konstrukcija • visoka rezalna in razpirna sila • preverjena HURST tehnologija • popoln komplet – pripravljen za uporabo

Stanje: novo, Naprodaj profesionalni močnostni krmilnik (tirostrski) Advanced Energy iz serije Thyro-A. Naprava je NOVA – nikoli uporabljena (skladiščno ohranjena). Industrijska oprema visoke kakovosti, primerna za napredne proizvodne instalacije. 🔧 Tehnični podatki: Proizvajalec: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Napetost: 400 V Tok: 350 A Izhod: Relay Out 4A / 250V Kdodpfx Alsyw T Ips Nek Tip: tiristorski (SCR) krmilnik ⚙️ Uporaba: industrijske peči grelni sistemi industrijska avtomatizacija močninsko upravljanje v proizvodnih linijah 📦 Komplet vsebuje: 3x modul Thyro-A industrijsko ohišje / hladilnik hladilni ventilator komplet kot na slikah ✅ Stanje: NOVO – neuporabljeno Možne minimalne sledi skladiščenja. Popolnoma delujoč.