Weingarten Arp 80 nakup rabljenega (19.801)

Stanje: rabljeno, Leto izdelave: 1981, Tlak 080 t Izsev 345 mm Hod 8 - 112 mm Število hodov 65 / min Razdalja med mizo in batom, velik hod zgoraj, nastavitev zgoraj 472 mm Površina mize 840 x 610 mm Prehodna odprtina v mizi 280 / 315 mm Višina mize nad tlemi 800 mm Prehod med stenama ohišja 500 mm Površina bata 650 x 400 mm Nastavitev bata 70 mm Pogonska moč 7,5 kW Ljdpfjvuua Asx Abxeac Teža 6,8 t Prostorske zahteve (ŠxGxV) 1,2 x 1,95 x 3,05 m z motorjem, pnevmatsko kombinacijo sklopke in zavore, hidravlično prenapetostno zaščito v batu, ročno nastavitvijo hoda, ročno nastavitvijo bata, pnevmatskim izravnavanjem teže bata, motoriziranim centralnim mazanjem, dvoročnim upravljanjem.

Stanje: rabljeno, Leto izdelave: 1977, Tlak 80 t Hod 8 - 112 mm Število hodov 65 /min Laedpfx Abevut Npexoc Iztegovanje 345 mm Prehod med stenami ohišja 500 mm Vgradna višina 472 mm Površina mize 840 x 610 mm Prehodna odprtina v mizi 280 / 315 mm Višina mize nad tlemi 800 mm Površina drsnika 650 x 410 mm Nastavitev drsnika 71 mm Pogonska moč 13,5 kW Teža 6,10 t Prostorske zahteve pribl. 1,5 x 1,9 x 3,0 m S polno spreminjanjem motorja, pnevmatsko kombinacijo sklopke/zavore (Ortlinghaus), mehansko zaščito pred preobremenitvijo v drsniku, ročno nastavitvijo hoda, motorizirano nastavitvijo drsnika, fiksno mizo, motoriziranim centralnim mazanjem, dvorokim upravljanjem.

Stanje: rabljeno, Pressure 80 t Outreach 320 mm Stroke 8 - 112 mm Table size 830 x 600 mm Strokes per minute 30 - 85 Ram surface 650 x 400 mm Ram adjustment 71 mm Laedjtqm Dmjpfx Abxoc Clamping plate 990 x 550 mm Table height above floor level 810 mm Table height above ground 800 mm Frame clearance (front) 680 mm Frame clearance (rear) 520 mm Total power requirement 7.5 kW Machine weight approx. 7.7 t Space requirement approx. 1.5 x 2.2 x 3.15 m Equipment: - with feed rollers - fixed table Machine has been/is being partially overhauled: - Complete disassembly and inspection - Table and ram surfaces re-milled - New seals and hydraulic hoses - New main motor - Both main bearing bushings, third bearing bushing, and connecting rod bushing replaced - Shaft machined and newly bushed - Repainting - New control cabinet with PLC and touchscreen wiring - Current UVV inspection with brake time measurement

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 80 t Outreach: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table surface: 830 x 610 mm Ram surface: 650 x 400 mm Gap depth (to rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment: Lajdpotycdkjfx Abxjc - with gear-driven wheels - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - central grease lubrication - cover plate for drop-through hole - stepless speed control via frequency converter - The machine will be mechanically inspected and overhauled in our facility, and will receive a new control cabinet with safety control and touchscreen - Current UVV inspection with braking time measurement

Stanje: rabljeno, Leto izdelave: 1962, Tlak 080 t Izteg 300 mm Hod 8 - 112 mm Število hodov 60 /min Razdalja miza/bat, max. hod zgoraj, nastavljivo zgoraj 467 mm Površina mize 710 x 560 mm Prehodna odprtina v mizi 240 x 115 mm Višina mize nad tlemi 800 mm Površina bata 400 x 315 mm Nastavitev bata 80 mm Pogonska moč 7,5 kW Teža 5,1 t Potrebni prostor (ŠxGxV) 1,4 x 1,9 x 2,7 m Lajdpoyq Smiofx Abxec POSEBNA AKCIJA Kot stoji in leži, BREZ dodatnih del Prosto natovarjanje na tovornjak

Stanje: rabljeno, Technical Details: Laodpfx Ajvgbgaobxec Sheet width: 1000 mm Sheet thickness: 3.0 mm Minimum sheet thickness: 0.5 mm Frame opening: 920 mm Number of straightening rollers: 4 pcs. top / 4 pcs. bottom Roller diameter: approx. 75 mm Number of rollers: 2 pcs. top and 2 pcs. bottom Machine weight approx.: 6.5 t Dimensions (L x W x H): 3.8 x 2.2 x 2.1 m This is a plate straightening machine with hydraulic feed. Further features: 4 top straightening rollers Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 bottom straightening rollers Ø 75 x 830 mm, fixed, hydraulic 4 extraction rollers Ø 110 x 480 mm, 2 adjustable at the top (approx. 20 mm) and 2 at the bottom, hydraulic Roller mounts Infeed height 1400 mm Equipped with hydraulic unit External operation Recommendation: Complete as a strip processing line (decoiler + loading device + straightening machine with hydraulic feed) available for sale, optionally together with stock no. 0100572.

Stanje: rabljeno, Technical Details: Sheet width: 800 mm Coil weight: 12 t Max. sheet width: 800 mm Lsdpfou Ic Avex Abxsac Min. sheet width: 300 mm Strip thickness: max. 5.0 mm Strip speed: 4.5 / 25 m/min Working height: 1700 mm Load capacity: 12.0 t (Coil) Approx. machine weight: 7.3 + 6.62 t Decoiler dimensions: 3.2 x 1.9 x 2.7 m Approx. machine dimensions LxWxH: 2.5 x 2.6 x 2.45 m Decoiler with loading device and straightening machine Coil Decoiler UR 80.5: Max. outer Ø 1,500 mm Max. strip width 800 mm Max. load capacity 12 t Expansion Ø 470 - 630 / 570 - 730 mm (spread) Traversable transport unit LxWxH: 1700 x 1500 x 1000 mm; transverse movement, with prism support 1000 x 1000 mm Straightening machine UAH 80: Min. strip width 300 mm, max. 800 mm Max. strip thickness 5 mm 2 x feed rollers Ø 144 x 850 mm, adjustable 3 x lower straightening rollers Ø 100 x 850 mm, fixed 3 x upper straightening rollers Ø 110 x 850 mm, adjustable 30 mm Recommendation: Complete strip processing line (decoiler with loading device and straightening machine + straightening machine with hydraulic feeder) optionally available for sale together with stock no. 0100571.

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Stroke 40 - 190 mm Strokes per minute 40 /min Throat depth 500 mm Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Die opening in table 450 mm Table height above floor 800 mm Ram area 1200 x 800 mm Ram adjustment 125 mm Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) Lajdjvuuaiopfx Abxjc With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation

Stanje: rabljeno, Leto izdelave: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Clearance between frame walls: 1000 mm Installation height: 615 mm Table area: 1400 x 880 mm Pass-through opening in table: 450/500 mm Table height above floor: 800 mm Ram area: 1380 x 620 mm Ram adjustment: 125 mm Ledjvut Ncepfx Abxjac Drive power: 29.0 kW Weight: 27.0 t Required floor space approx. 2.0 x 2.6 x 4.1 m (L x W x H) Approved for manual loading operations according to German Accident Prevention Regulations (UVV). Equipped with pole-changeable motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation control. The machine can be inspected under power at our warehouse.

Stanje: rabljeno, Leto izdelave: 1977, Tlačna sila 80 t Iztek 280 mm Hod 8 - 112 mm Število hodov 30 - 120 /min Razdalja miza/klin, največji hod zgoraj, nastavitev zgoraj 500 mm Površina mize 840 x 580 mm Prebojna odprtina v mizi 150 mm Ledpfx Abevut E Rexjac Višina mize nad tlemi 910 mm Prehod med stenami ohišja 640 mm Površina klina 560 x 300 mm Nastavitev klina 80 mm Pogon 7,5 kW Teža 8,0 t Prostorska potreba (ŠxGxV) 1,6 x 2,3 x 3,3 m S stopenjsko nastavljivim pogonom, pnevmatsko sklopko, hidravlično prenapetostno zaščito v klini, ročnim nastavljanjem hoda, motornim nastavljanjem klina, nagibna, ročna centralna mazalna, dvoročna in nožna upravljanja.

Stanje: rabljeno, Leto izdelave: 1980, Pressing force 1,250 kN Lasdpfjrm Ntpox Abxsc Stroke adjustable from 20 to 140 mm Stroke rate 70 strokes/min. Further data and images available on request The press is currently non-operational and requires mechanical and electrical overhaul.

Stanje: dober (rabljeno), stiskalna sila: 80 t, globina grla: 400 mm, nastavitev hidravličnega cilindra: 80 mm, Pressing force: 80 tons Table size: 750 x 550 mm Ljdpfx Abeugtkxsxoac Ram adjustment: 80 mm Stroke length: 8 - 112 mm Strokes per minute: 78 spm Throat depth: 400 mm Equipped with: - Air clutch - Safety guard Country of origin: Germany Machine dimensions (LxWxH): 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg

Stanje: rabljeno, Single-column Eccentric Press WEINGARTEN Type ARP 100 Machine No. 122481 Year of manufacture 1984 Pressing force: 100 tons Throat depth: 400 mm Table size: 920 x 660 mm Ram area: 700 x 450 mm Clear opening at rear: 735 mm Stroke adjustment: 20 - 160 mm Ram adjustment: 80 mm Shut height at 160 mm stroke: max. 355 mm (without bolster plate) Shut height at 20 mm stroke: max. 425 mm (without bolster plate) Strokes per minute: 60 Bolster plate surface: 920 x 610 mm Bolster plate thickness: 90 mm Drop-through hole in bolster plate: Ø 210 / 180 mm Drop-through hole in machine table: Ø 210 / 180 mm Table height above floor: 800 mm (without bolster plate) T-slot width in table and ram: 22 mm Clamping pin bore: 50 mm Motor power: 11 kW Mains connection: 400 Volt, 50 Hz - Hydraulic overload protection in the ram - ORTLINGHAUS pneumatic clutch-brake combination - Motorized ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear drive with enclosed oil-bath gearbox - Two pneumatic ram balance cylinders - Automatic central lubrication system WOERNER Lsdou Rwa Iepfx Abxjac - Stroke release via electric foot switch or two-hand control desk - Electrical control cabinet fixed to the machine - Operating manual and wiring diagram - UVV safety for hand-insertion operations Space requirements L x W x H: 2200 x 1600 x 3250 mm Weight: 8.3 tons Good condition

Leto izdelave: 1978, stanje: rabljeno, Pressure: 80 t Throat depth: 280 mm Stroke: 8–112 mm Strokes per minute: 55 / 82 spm Stroke adjustment: 80 mm Table area: 800 x 570 mm Ram area: 560 x 355 mm Table through-hole diameter: 280 mm Table height: 800 mm Lajdpfx Ajlp U Ddobxjc Ram bore diameter: 50 mm Total power requirement: 7.5 kW Machine weight approx.: 6 t Space requirements (WxDxH): approx. 1600 x 2200 x 3000 mm Gear drive Balance cylinder Friction clutch Central lubrication Approved for manual loading/unloading

Stanje: dober (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), stiskalna sila: 200 t, širina mize: 800 mm, dolžina mize: 1.100 mm, globina grla: 440 mm, tabela razdalj do bata: 400 mm, skupna dolžina: 37.200 mm, skupna širina: 24.000 mm, skupna višina: 18.200 mm, skupna masa: 12.600 kg, nastavitev hidravličnega cilindra: 110 mm, Plunger stroke: 40–180 mm incl. Helmerding feed, 400 mm x 4 mm Lodpfxstu Hvwj Abxeac Strokes: 40 + 60 per min Distance table/ram – adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Stanje: rabljeno, Leto izdelave: 1963, Nazivni pritisk 240 t Hod 130 - 380 mm Število hodov 21 - 31 /min Širina med stebri 700 / 610 mm Razdalja med mizo in batom, velik hod zgoraj, zgoraj nastavljeno 650 mm Površina mize 620 x 620 mm Laodpfxeyx Ik Io Abxsc Površina bata 550 x 550 mm Premer vretena 180 mm Pogonska moč 12,0 kW Teža 10,5 t Dimenzije (ŠxDxV) 1,45 x 1,6 x 3,32 m Odobreno samo za toplo preoblikovanje S pogonom s trenjem

Stanje: rabljeno, Leto izdelave: 2015, Reciklačni sistem za pridobivanje in ločevanje plastike ter gumijastih izdelkov od tekstilnih ojačitev, kot so različne vrste gumijastih cevi, PVC, ponjave, transparenti in drugi plastični materiali s tekstilno ojačitvijo. Sistem deluje v povezavi z granulatorjem in separacijskim sistemom. Ura proizvodnje: 50 - 80 kg/h Dimenzije odprtine za dovod: 270 x 120 mm + Ø80 mm Dolžina rezil: 3x2 + 2x2 Premer rotorja: 250 mm Ljdpfjwpkw Ejx Abxoac Dolžina reza: 600 mm Moč motorja: 22 kW Dimenzije: 3200 x 3000 mm Višina: 2500 mm Teža: 1000 kg Leto proizvodnje: 2015 Tehnično stanje: rabljeni stroj, vsi motorji delujoči. Manjka zgornji pokrov za nalaganje izdelka z dimenzijami: 400x300 mm. Na voljo je popolna in originalna tehnična dokumentacija.

Stanje: rabljeno, Technical details: Total nominal force: 800 t Clamping area (left-right): x mm Clamping area (front-back): x mm Table surface: 3200 x 2200 mm Total nominal force: 2-3-4-5- press - 600 t each Table surface: 2-3-4-5- press 3100 x 1900 mm Last overhauls: 2010/2020, scope of supply consists of: Blank washing unit, manufacturer: Neuhäuser, with 6 cleaning rollers, system no. 0905200, control system by Siemens Blank automation, manufacturer: Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet ejection Gripper automation, manufacturer: Olofström, type Doppin Loader 2000, SN 37719974886, system no. ... Double-column press, manufacturer: Weingarten, type ZS 1200.34, year 1972, Order no. 113 021, press force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and draw slide 2,150 mm, blankholder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table and blankholder 1,950 mm, max. drawing depth 300 mm, strokes per minute: 14, control system by Siemens, operator panel by Baluff, table size 3,200 x 2,200 mm, system no. ... Gripper automation consisting of: 2 blank grippers, press-mounted, system nos. 0602400, 0602500, with turntable and turning device Double-column press, manufacturer: Raskin, type 6031AE4, year 1979, Order no. 7810011, single action, press force approx. 600 t, strokes per minute: 18, slide stroke 700 mm, distance between bolster platen and slide 1,200 mm, slide adjustment 400 mm, clear width between columns 3,220 mm, slide base 3,100 x 1,900 mm, die mounting surface 3,260 x 1,900 mm, drawing cushion, pressing force 125 t, stroke 0-200 mm, control system by Siemens Lodpfx Abex Ag Epjxoac Press automation consisting of: 2 blank grippers, press-mounted, turn and rotation table, system no. 0602600 Double-column press, manufacturer: Raskin, type 0631AE4, year 1979, Order no. 7810012, single action, press force approx. 600 t, strokes per minute: 18, slide stroke 700 mm, distance between bolster platen and slide 1,200 mm, slide adjustment 400 mm, clear width between columns 3,220 mm, slide base 3,100 x 1,900 mm, die mounting surface 3,260 x 1,900 mm, drawing cushion, pressing force 125 t, stroke 0-200 mm, control system by Siemens, system no. ... Blank automation consisting of: 2 grippers, system nos. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer: Raskin, type 6031AE4, year 1979, Order no. 7810013, single action, press force approx. 600 t, strokes per minute: 18, slide stroke 700 mm, distance between bolster platen and slide 1,200 mm, slide adjustment 400 mm, clear width between columns 3,220 mm, slide base 3,100 x 1,900 mm, die mounting surface 3,260 x 1,900 mm, drawing cushion, pressing force 125 t, stroke 0-200 mm, control system by Siemens Blank automation consisting of: 2 blank grippers, press-mounted, turn and rotation table, system no. 0603000 Double-column press, manufacturer: Raskin, type 06031AE4, year 1979, Order no. 7810014, press force approx. 600 t, strokes per minute: 18, slide stroke 700 mm, distance between bolster platen and slide 1,200 mm, slide adjustment 400 mm, clear width between columns 3,220 mm, slide base 3,100 x 1,900 mm, die mounting surface 3,260 x 1,900 mm, drawing cushion, pressing force 125 t, stroke 0-200 mm, control system by Siemens 6-axis robot, manufacturer: Kuka, type KR 100 R3500 Press, year 2014, SN 674326, weight

Stanje: rabljeno, Leto izdelave: 1983, Pritisk 100 t Izravnava 375 mm Hod 20-125 mm Število hodov 60 hodov/min Regulacija bata 80 mm Delovna površina mize 920x660 mm Površina bata 700x450 mm Prebojna odprtina v mizi Ø90 mm Oznaka v batu Ø50 mm Teža stroja cca 8 t Potrebna površina cca 2100x1500x3300 mm Pnevmatična sklopka-zavorna kombinacija Ljdpfxsxh Swhj Abxeac Izravnalni valj bata Motorizirana regulacija bata Hidravlično varovalo pred preobremenitvijo v batu Centralno mazanje z mastjo Sprednji ležaj

Stanje: rabljeno, Geared motor, electric motor, electro-geared motor - Speed: 3.7 rpm - Power: 0.55 kW - Shaft diameter: Ø 32 mm - Design: B5 Lsdpfx Abscmtndexoac - Protection class: IP 44 - Dimensions: 760/220/H250 mm - Weight: 42 kg

Stanje: dober (rabljeno), Digital display, length measuring system, length measuring device, linear scale, position indicator, digital scales, linear encoder, linear encoder, positioner, Balluff switch, position switch -Manufacturer: Marposs, Balluff switch Positionar -Type: 34 Measuring length: 80 mm -Box dimensions: 300/200/H100 mm Lodpfx Aew Act Eebxjac -Weight: 1.9 kg

Stanje: novo, Leto izdelave: 2026, Dry rotary vane vacuum pump Available in stock. Ledpfeftzkqex Abxsac Marpa Vacuum pump. Brand new unit. 12-month warranty Nominal flow rate: 80 m³/h at 50Hz. Ultimate vacuum: 150 mbar abs. For any questions, please contact us.

Stanje: rabljeno, Zasučna upogibna stiskalnica Tip: Weingarten ALH Stanje: rabljeno Laodpfx Ajy I U U Ssbxoc Tehnični podatki Debelina pločevine: 1,25 mm Dolžina upogibanja: pribl. 2030 mm

Stanje: rabljeno, Ročne giljotinske škarje Tip: Weingarten TH Stanje: rabljeno Lajdpfx Aboy I U Acjxjc Tehnični podatki Širina reza: cca 1070 mm Debelina pločevine: 1,25 mm

Stanje: rabljeno, Leto izdelave: 1978, Presskraft 160 t Hubzahl 40 – 120 Hub/min Blechbreite mm gesamter Leistungsbedarf 40 kW Presskraft 160 to (1.600 kN) Tischaufspannfläche 1.100 x 1.280 mm Stößelaufspannfläche 850 x 890 mm Abstand zwischen Stößelführungen 1.120 mm Abstand zwischen den Ständern (unterhalb der Führungen) 1.350 mm Hubzahl stufenlos verstellbar 40 – 120 /min Hubverstellung 30 / 68 / 114 / 160 mm Stößelverstellung motorisch 125 mm Einbauhöhe je nach Hub – ohne Aufspannplatte – 460 – 650 mm mit Aufspannplatte – 340 – 530 mm Zulässige Hubzahl in Relation zum Materialvorschub: Bei 300 mm = 40 – 60 Hübe Bei 150 mm = 120 Hübe Gesamtantriebsleistung ca. 40 kW – 500 V – 50 Hz Gewicht ca. 24.000 kg Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Typ AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, keine Grube erforderlich). Das Blechband läuft über die Abrollhaspel zum einseitigen Zangenvorschubgerät und anschließend in die Presse. • HEILBRONN Coilabwickelgerät Typ HAEMH 4000/500 S #204753 mit Coilablageplatz, von dem das Coil aufgenommen und gespannt wird. Danach Rückführung in die Ausgangsposition. Max. Coilgewicht 4.000 kg, max. Coil-Ø 1.500 mm, max. Bandbreite 500 mm. • Angebauter Richtapparat für max. Blechbreite 400 mm, Blechführung in der Breite verstellbar, Blechdicke 1 – 3 mm einstellbar. • Automatische Öl-Umlaufschmierung mit Überwachung. • Hydraulische Überlastsicherung, motorische Stößelverstellung 125 mm. Lasdpfx Aet Hwz Njbxec • Förderband für die fertigen Pressteile, separater Schaltschrank – modernisiert 1990 –.