Vötsch Razpršilna Naprava Za Temperaturno Preskusno Komoro nakup rabljenega (84.751)

Stanje: zelo dobro (rabljeno), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Cgjdpfx Afjwc Nvgj Dsu Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in stabilized state according to IEC 60068-3-5, depending on test chamber temperature temporal ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: Water level is below the insert rack Water level = 0 mm: Water level is at the top edge of the insert rack Standard spray device data: Number of spray nozzles: 6 Spray rate per nozzle: 0.5 l/min Spray device data as per EN 539-2, Method B: Number of spray nozzles: 6 Spray rate per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray rate per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Pre-tempered water tank data: Volume: approx. 2000 l Pre-tempering temperature range: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Setup and operation data: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feed-throughs: 1 feed-through, ø 50 mm, installed on the left Test chamber capacity: approx. 500 liters Refrigerant: R-404a Electrical connection: Rated voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: approx. 26 kW Rated current: approx. 44.0 A (neutral conductor is loaded) Protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak tightness test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data are subject to change and errors!) For further questions, please contact us by phone.

Stanje: dober (rabljeno), Welding positioner Protec KT 2000 A Load capacity: 2000 kg Csdpepdqfrefx Af Dogu Continuously adjustable Tilt angle: 0 to 120° With hand and foot remote control Height horizontal: 1200 mm Height tilted to center: 1000 mm Special version with welding current transmission: 800 amperes Length: 1700 mm, Width: 1200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 15.708 h, številka stroja/vozila: 700167604, vrsta vhodnega toka: trifazni, We offer this Bühler SORTEX A MultiVision I grain sorting system in very good condition, year of manufacture 2019. Manufacturer: Bühler Model: SORTEX A MultiVision I Year: 2019 The high-resolution Multi Vision inspection system detects even the slightest colour deviations, as well as light and dark colour defects. The patented PROsize technology sorts products and foreign materials with the same colour as the good product based on size characteristics. The system is equipped with Near Infrared Spectroscopy (NIR) technology for visual colour analysis. This enables the sorter to detect defective items or foreign objects of any colour, including black. It also allows detection of colour defects. The machine is fitted with a new optical sorter, achieving up to 50% higher reject concentration. SpectraVision has been designed to deliver maximum yield. The newly designed internal full-colour cameras provide excellent colour resolution even for the smallest defects, while new InGaAs cameras take foreign material (FM) detection to a new level. Innovative ejection algorithms significantly reduce false rejects, and new calibration and tracking algorithms improve machine consistency and minimise false rejections. Default modes and programmes for each product are preset and tested by SORTEX experts for optimal machine settings straight out of the box. The user-friendly interface design and individual sensitivity control for each defect make it easy for operators to maintain optimal machine performance. Cgedpfjzbh Hmjx Af Deu Machine performance can be monitored from anywhere in the world in compliance with Industry 4.0 standards. Machine setting adjustments are logged and stored in the Bühler Insights system, and the SORTEX monitoring system enables real-time monitoring of sorting performance and emergency alerts.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Na predaj: Minipack-Torre Modular 50 Digit baliaci stroj na zmršťovaciu fóliu, vyrobený v Taliansku. Spoľahlivý a odolný L-zvárací baliaci stroj, vhodný na balenie rozličných produktov do zmršťovacej fólie. Aktuálne máme na sklade 4 identické kusy – všetky sú plne funkčné. Uvedená cena je za jeden stroj. Lokalita: Ivanka pri Nitre, Slovensko – možnosť obhliadky alebo okamžitého odberu. Technické parametre: Výrobca: Minipack-Torre S.p.A., Taliansko Model: Modular 50 Digit Rok výroby: 2001 Napätie: 380–415 V Frekvencia: 50–60 Hz Príkon: 2,3 kW Prúd: 6,0 A Certifikácia: CE Sériové číslo: 001088 Stav: Plne funkčný a otestovaný stroj Cgjdpfx Aexu Dulsf Dsu Dobrý technický a vizuálny stav Vhodný na nepretržitú priemyselnú prevádzku Stroje sú servisované a skladované v interiéri Cena: 3 500 € za kus (EXW Ivanka pri Nitre, Slovensko) Všetky štyri stroje sú k dispozícii na okamžitý predaj. Vhodné pre: Priemyselné a komerčné balenie Aplikácie so zmršťovacou fóliou (PVC, POF, Polyolefin) Balenie potravín, kozmetiky a rôzneho tovaru

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ZT010010, Popis Na predaj: spoľahlivý zmršťovací tunel Smipack T450, určený pre profesionálne baliace aplikácie s použitím teplom zmrštiteľnej fólie. Tento model vyrobený v Taliansku zaručuje konzistentný výkon, vysokú odolnosť a jednoduchú obsluhu. Je vhodný na balenie výrobkov do PVC, POF alebo polyolefínových fólií, a to buď ako samostatné zariadenie, alebo ako súčasť automatizovanej baliacej linky. Codpfxoxq Ance Af Dogu _____ Technické parametre • Výrobca: Smipack S.p.A., San Pellegrino Terme (BG), Taliansko • Model: T450 • Rok výroby: 2010 • Napájanie: 380–415 V / 3 fázy + PE / 50–60 Hz • Príkon: 8 kW (11,5 A) • Nastaviteľná teplota a rýchlosť dopravníka • Digitálny ovládací panel pre nastavenie a monitoring parametrov • Rozmery tunela vhodné pre štandardné priemyselné baliace linky • Dopravníkové valce z nehrdzavejúcej ocele • Núdzové zastavenie a hlavný vypínač pre bezpečnosť • Kolieska pre jednoduchú manipuláciu _____ Stav • Plne funkčný a otestovaný • Pravidelne udržiavaný a pripravený na okamžitú prevádzku • Čistý a vo veľmi dobrom celkovom stave • Možnosť obhliadky v spoločnosti Roffelsen Plastics (Slovensko) _____ Cena 3 500 € _____ Využitie Vhodné pre malé a stredne veľké baliace linky v potravinárskom, plastikárskom, kozmetickom alebo spotrebnom priemysle. Možnosť kombinovať s L-zváračkami alebo automatickými baliacimi systémami.

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Codpowiwnqsfx Af Degu Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 22 kW (29,91 KM), Airrex AH 800i Csdjylv Dzspfx Af Degu Mobilni infrardeči grelec Rezervoar: 70 l Moč: 22 kW Primeren za prostore do 2000 m³ Zelo ekonomičen – poraba goriva 1,7–1,9 l/uro Mere (D x Š x V): 130 x 35 x 134 cm Teža: 81 kg Nastavljiv temperaturni razpon 0–40 °C Premičen, na krmilnih kolesih Takoj pripravljen za uporabo – priključite in vklopite Čisto zgorevanje – brez potrebe po dimniku! Upravljiv preko aplikacije – nastavitev temperature, sporočila in količina goriva neposredno na pametnem telefonu Suha toplota – brez kondenzata, kot pri plinu Deluje na biodizel ali dizel/rdeči dizel Nizka raven hrupa – le 48 dB Brez prahu – brez ventilatorja Brez emisij – brez vonja po gorenju Skladnost z novo EU direktivo o emisijah Samodejni ponovni zagon po izpadu elektrike

Stanje: dober (rabljeno), Internal item no.: 24089 Hot melt adhesive system Consisting of: 2x hot melt adhesive tank units (Dynamelt 505 / year of manufacture: 2004) 15 pcs. material hoses Various hot melt adhesive applicator heads (Dynatec BF) Operating manual Cgedpfx Afefkgycs Deu For technical data, see images

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Samoplavna naprava za sesanje olja za odstranjevanje olja iz stoječih in tekočih voda. Premer približno 1.250 mm. Zmogljivost do 400 l/min. Cgodpfjzbt Icjx Af Dju

Stanje: rabljeno, natančni koti in poševni rezi od 0° do 46°, z digitalnim prikazom kota Cgodpfowhzg Ujx Af Dsu Lokacija: Nattheim

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Popolnoma avtomatski postopek luženja Riehle model: Comjet Cgodpfx Afoywalue Dou Odpirač vozička 580x980 Zmogljivost do ca. 240 pladnjev/uro 180-litrski izvlečni lužni rezervoar 3-kratna bogata lužna zavesa Primerno za velikosti pladnjev 580 x 780 & 580 x 980 mm Visoka moč črpalke z dvojnim filtrom S solnikom Izvedba iz nerjavečega jekla Priklop: 400V, 32A-CEE vtič Mere ca.: 1270 x 4800 x 2500 mm (ŠxDxV) Rabljeni stroj

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 07/2027, vrsta vhodnega toka: Klimatska naprava, Stroj za mešanje in doziranje vode Aquamix 32 Popolnoma avtomatski stroj za mešanje in doziranje vode z avtomatsko nadzorovanim predtokom in številčno nastavitvijo Tehnični podatki: Dovodi temperature: 3 (z ledeno vodo) Cjdsygdayjpfx Af Dsgu Območje doziranja: 0,1 l - 999,9 l Območje nastavitve temperature: +0,5°C do +70°C Natančnost temperature: +/-2°C Natančnost doziranja od 1 l: +/-0,1 l Pretok vode pri 3 bara: do 30 L/min Priključek za vodo: zunanji navoj 3/4" Električni priključek: 220 - 240 V Mere naprave Š x V x G: 300 x 300 x 170 mm Rabljena naprava Na zalogi imamo še druge naprave!

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Unit / Spiral Conveyor / Vibratory Conveyor RNA Vibratory Bowl, Sorting Unit / Screw Feeder with Vibratory Conveyor for Screwdriving Technology Feeding System, Feeding Device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: likely SRC-N 250-2R Year of manufacture: approx. 2000 Bowl diameter (bottom): 250 mm Bowl diameter (top): 380 mm Bowl internal height: approx. 90 mm Sorting track width: 30 mm Overall height (drive unit + bowl with sorting track): 405 mm Vibration frequency: 100 Hz / 6000 rpm Power supply: 230 Volts, 50 Hz Codozbhuqspfx Af Dsgu - RNA controller, type ESG 90, for adjustable vibration speed - Vibratory bowl with rubber lining - The feeder was used for supplying automotive blade fuses Required space Ø x H: 430 x 405 mm Weight: 38 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the bowl through mechanical oscillations, thus setting the parts in motion.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, The Matest C313N is a laboratory freeze-thaw and climate chamber primarily used for building materials testing – particularly to investigate the behavior of concrete, cement, aggregates, and other materials under varying temperature and humidity conditions. Main areas of application: - Simulation of freeze-thaw cycles (e.g., testing concrete samples for resistance to thermal cycling). - Durability testing of construction materials according to standards (e.g., EN 1367-1). - Accelerated aging and climate tests under various environmental conditions. Features: ✔ Control of two parameters: temperature and humidity. Cgodpfx Afoy R D D Us Dju ✔ Temperature range: approx. -30°C to +70°C. ✔ Humidity range: 20–95% (±1% accuracy within the relevant temperature range). ✔ Programmable cycles: up to 50 programs and 100 segments configurable. ✔ 5" color display: real-time clock and optional data logging via PC connection. ✔ Stainless steel interior and exterior housing for long service life. Fields of application: - Freeze-thaw cycle testing on concrete and building materials: demonstrates how the material may crack or be damaged by thermal cycling. - Quality control of construction materials under laboratory conditions. - Environmental and climate testing, where precise control of temperature and humidity is required.

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 6.972.373 h, Funkcionalnost: popolnoma funkcionalen, Dvižna naprava za papirne skladovnice Cgjdpjy T Rh Sjfx Af Dju

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6972372, Dvižna naprava za papirne skladovnice Cgodpsy T Rhrsfx Af Dou

Leto izdelave: 1976, stanje: rabljeno, Tehnični podatki: Premer: 500 mm Teža obdelovanca: 30 kg Minimalni premer za preizkus: 200 mm Skupna potrebna moč: 0,03 kW Cgedeyyapxepfx Af Dju Teža stroja cca.: 1000 kg Potreben prostor cca.: 1x0,5x1,06 m

Stanje: rabljeno, Vibracijska posodica za podajanje, krožni podajalnik delov Gasco BVN3 470mm, rabljeni stroj Proizvajalec: Gasco Tip: BVN3 Skupne dimenzije: 555 x 535 x 400 mm Velikost posode/rezervoarja: 470 x 250 mm Csdpfjy R S I Ijx Af Dogu Električni podatki: 230 V, 1,6A

Stanje: rabljeno, Column Drilling Machine, Geared Head Drill Press ALZMETALL Type AB 40 ST Production Drill Serial No. 750 Year of manufacture: 1994 Drilling capacity: 40 mm Spindle taper: MT 4 - Short quill Throat depth: 325 mm Quill travel: 200 mm Table size: 740 x 460 mm Drill head height adjustment: 700 mm Distance spindle-table: max. 1015 mm Csdeza Hzgjpfx Af Dogu Spindle speed: 56 - 2500 rpm, 12 gear steps Automatic feed: 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Spindle speed adjustable via 12-step gear transmission - Drilling and tapping function with forward/reverse rotation - Electric foot switch for reversing spindle direction to left-hand rotation during tapping interruption - Rapid feed via hydraulic quill movement - Semi-automatic operating sequence: rapid approach – working feed – rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height adjustable from 740 to 1170 mm) - Coolant device included - Control cabinet mounted on the rear of the machine - Mounted on steel plate (1300 x 750 x 15 mm) with machine feet - Quick-action drill chuck METABO 3 to 16 mm - Operating instructions and electrical diagram Overall height with drill head in top position: 2750 mm Space required (L x W x H): 1400 x 850 x 2300 mm Weight: 1250 kg Good condition

Stanje: rabljeno, Temperirna enota HB-Therm HB-100 U1, Temperiranje, Temperiranje tekočin, Industrijsko temperiranje, Termolator, Rabljeni stroj Proizvajalec: HB-Therm Codpfjx Emfwex Af Degu Tip: HB-100 U1 Skupne dimenzije: 200 × 650 × 500 mm Leto izdelave: 2008 Tehnični podatki: Maksimalna delovna temperatura: 100°C Grelná moč: 8 kW Hladilna zmogljivost: 30 kW Medij za prenos toplote: voda

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, trajanje garancije: 12 meseci, Certificirano po DGUV do: 07/2027, skupna masa: 49 kg, skupna dolžina: 450 mm, skupna širina: 620 mm, skupna višina: 1.030 mm, potrebna višina: 1.030 mm, zahteva za prostor dolžina: 450 mm, potrebna širina: 620 mm, NEW NEW Lye Mixing Device for Pretzel Lye NEW NEW Includes hydrometer Csdpfxsrkz E Us Af Dsgu Includes drip tray and dosing cap Stainless steel trolley with locking castors Maximum safety for your desired lye concentration. Optimal mixing, quantities precisely dispensed as required. Dimensions (WxDxH) in mm: 620 x 450 x 1030 NEW device + spare parts service Further bakery machines in stock!

Stanje: rabljeno, Leto izdelave: 1999, Clamping force: 3150 kN Mounting platen: 900x900 mm Tie-bar distance: 550x550 mm Machine weight: approx. 15.5 t Clamping stroke: 500 mm Ejector force: 159 kN Ejector stroke: 120 mm Mold height: 300–700 mm Tie-bar diameter: 110 mm Injection force: 158 kN Injection stroke: 250 mm Injection plunger diameter: 70, 80, 90, 100 mm Casting volume (DIN 24480): 514, 791, 1105, 1455 cm³ Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Eject stroke: 300 mm Csdpfxovfhrtj Af Dsgu Used die casting machine DAM 315 S with Datacontrol control system, suitable for magnesium alloy processing. Available from used machinery stock. The machine is equipped with a Rauch electric furnace, type MMO 315E. Spray device not included. Manufacturer’s recommendation: repair or overhaul at the refurbishment facility. Scope of work can be agreed upon as required.

Stanje: novo, Leto izdelave: 2024, Clamping force: 2,200 kN Clamping plate: 755 x 755 mm Tie bar spacing: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mold height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific casting pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1,078 cm² Return stroke: 230 mm Machine equipment: 1.1.1 Motorized safety door on casting side right 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector assistance packages 2.1.2 Core pull device M2 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting assistance packages 3.0.1.2 Casting assistance package Technology 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified plunger removal 3.5.2 Electric nozzle and casting container heating 3.5.3 Pluggable connections for electric nozzle and casting container heating 4.3.1 Additional heat exchanger 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.4 Integrated water circuit control 2+8 circuits 5.1.1 Machine control DATADIALOG – Shot Stop 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for part removal 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum device 6.1.7 Frech interface for doorman function 6.5.2 RSD equipment package with switch 7.2.3.3 Spraymotion 811 E with servo drive 7.2.10 Extended spray program Cedevvx Hcopfx Af Dsgu 7.3.1 Release agent tank TD 20 7.4.0.6 Spray bar CR 458

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina papirja (min.): 2.100 mm, največja višina papirja: 120 mm, skupna dolžina: 3.300 mm, skupna širina: 3.500 mm, skupna višina: 2.100 mm, Bürkle LFC 2100 Liquid Coating System Item: For liquid sealing of digitally printed media. Suitable for the application of primers or protective coatings, as well as for full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct curing with overhead UV radiation. Condition: As new (purchased in 2023) Availability: Immediately Brief Description For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was sourced in 2023 through Welte and has only been operated for a few hours since then. It is in excellent optical and technical condition (demonstration state) and offers a premium solution for UV finishing of large-format prints. The machine also includes a cleaning/washing unit with extraction as well as a second roller (smoothing roller). Technical Data & Highlights - Maximum working width: 2,100 mm - Substrate thickness: Flexibly adjustable up to 80 mm - Conveying speed: Infinitely adjustable (up to 25 m/min) - Drying: Includes powerful UV drying unit (TRUV) for immediate downstream processing - Controls: Modern operator panel for precise process control Asking Price Cedpfxoy Szwuj Af Dogu €150,000 (negotiable) plus VAT | ex works Contact & Inspection The system is still assembled and can be inspected and tested under power by prior appointment. (Location: St. Martin bei Lofer, Austria)

Leto izdelave: 2018, stanje: rabljeno, Year of manufacture refers to the final acceptance of the system; individual components may vary in age. Workpiece dimensions up to max. LxWxH: 8,000 x 2,000 x 2,000 mm. Maximum crossbar load: 2,000 kg/trolley. Material: Steel. Pos. 1: Washing cabin, Jumbo-Clean, with stainless steel interior for degreasing/phosphating of steel by automatic system or manual lance; Pos. 2: 1 set of band filters; Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing cabin including central lance; Pos. 4: 1 fresh water treatment system; Pos. 5: 1 manual push track with 1 electric transverse transfer platform; Pos. 6: 1 lifting/lowering station Jumbo-Lift 2000 integrated into the transverse transfer platform; Codpfxoy T Nzds Af Dogu Pos. 7: 1 adhesion water/powder dryer/wet paint dryer, indirectly gas-heated, door opening WxH: 2,800 x 3,100 mm, clear length: 9,500 mm, overall WxHxL approx.: 4,000/5,000/10,000 mm; Pos. 8: 1 face-side powder extraction system for on-site paint booth for spraying and drying operation; Pos. 9: 1 manual coating device OptiFlex(R)2; Pos. 10: 1 supporting structure for on-site steel structure; Pos. 11: Control cabinet.