Vötsch Komora Za Preskus Temperaturnega Šoka -70–220°C nakup rabljenega (113.518)

Leto izdelave: 2000, obratovalne ure: 104.382 h, stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test evaluates the resistance of components, devices, and other products to rapid changes in ambient temperature. Test specimens are subjected to rapid temperature changes in air, alternating between upper and lower temperature levels under varying load conditions. Through these cyclic stresses and temperature-change-induced accelerated aging, potential weaknesses in the specimen can be identified. - Vertical arrangement of test chambers - Ball screw drive for secure carriage guidance - Carriage load capacity: 50 kg (VT3 7012 S2) - All-around mesh baskets secure the test specimens - High air circulation rate for short temperature change times and even temperature distribution in the test chamber - Warm chamber can be used as a temperature storage unit; cold chamber can be used as a temperature cycling unit - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test Chamber Volume: 120 l Rated Voltage: 400 V Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452A Cooling Unit: Water-cooled Shock Cooling (nitrogen cooling) via customer-supplied liquid nitrogen feed External Dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions: Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class: Device: IP 42 Control unit: IP20 Switch cabinet: IP 54 Key Parameters for Temperature Tests in Single-Chamber Operation: Temperature Range: Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K (in steady state) Temperature deviation spatially: ±2 K (in steady state within carriage) Warm chamber heating rate: 11 K/min Cold chamber cooling rate: K/min Cold chamber heating rate: 2 K/min Warm chamber cooling rate: K/min Observation window: 355 x 355 mm Psdpfxex Exmts Apmept Cable port: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg Financing through our partner bank is available. komplett-konzept.leasingo.de More articles—new and used—can be found in our shop! International shipping rates upon request!

Stanje: zelo dobro (rabljeno), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -74.5°C to +70°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Psdpex Hhfhsfx Apmopt Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Internal dimensions (W x D x H): 470 mm x 650 mm x 410 mm External dimensions (W x D x H): 930 mm x 2115 mm x 1970+ mm Access port: ∅ 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg For your security as a buyer, please note the following information! The following steps are carried out in advance for our offered chambers: 1. Function test and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data and details!) We will be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Temperature shock test chamber, water-cooled Two-chamber design Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Psdoigg Hnepfx Apmspt Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions (W x D x H): 470mm x 650mm x 410mm External dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port diameter: 67mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and error!) If you have further questions, we are happy to answer them by phone.

Stanje: rabljeno, Weiss Type: TS 130 Temperature Shock Test Chamber, Water-Cooled Specification: - Temperature range hot chamber: +60°C to +220°C Ppodpjvwckhefx Apmst - Temperature range cold chamber: -10°C to -80°C - Transfer between hot/cold chamber: 10 sec. - Temperature stability: ±1 K Dimensions and further data: - External dimensions: Height 1990 mm - Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm - Depth (without and with test chamber door): without approx. 900 mm / with approx. 1155 mm - Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm - Volume: 130 liters - Maximum test chamber load: 20 kg - Maximum floor load in test chamber: 20 kg - Cooling water pressure: min. 2 ... max. 6 bar - Max. circuit protection: 35 A (plug 32 A CEE) - Sound pressure level, 1 m in front of unit: approx. 65 dB(A) - Refrigeration cascade, water-cooled - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerants: R404A / R23 - Weight: approx. 950 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Thermal Shock Test Chamber Model: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a Vötsch thermal shock test chamber in a two-zone configuration for rapid temperature cycling tests. Suitable for use in industrial, automotive, aerospace, as well as research and development applications. Temperature Ranges: - Hot chamber: +50 °C to +220 °C - Cold chamber: -80 °C to +70 °C Temperature Data: - Temporal temperature deviation: ±1 K - Spatial temperature deviation: ±2 K - Heating rate (hot chamber): approx. 11 K/min - Heating rate (cold chamber): approx. 2 K/min - Cooling rate: approx. 3 K/min Test Space: - Volume: approx. 125 liters - Internal dimensions: approx. 470 x 650 x 410 mm - Cable port: Ø 67 mm Electrical Data: - Connection: 3/N/PE AC 400 V ±10% / 50 Hz - Rated power: approx. 10 kW - Rated current: approx. 25 A Refrigerants: - R404A: 2.9 kg - R23: 1.27 kg Pressure Data: - ND max.: 22.5 bar - HD max.: 25 bar Dimensions: - approx. 930 x 2115 x 1970 mm Weight: - approx. 1000 kg Equipment: - Two-chamber shock test system - Digital control - Programmable operation - Observation window - Cable port Condition: - Used - Control system overhauled and newly rewired - Control panel replaced - Spindle and spindle motor replaced - Plate heat exchanger insulated Scope of delivery: - Vötsch VT 7012 S2 thermal shock test chamber Pedpfx Apey Iyuwomspt - Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Sale without warranty. (Subject to change)

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber from Weiss Technik. The test chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Designation breakdown: T = Temperature Test Chamber Pjdpfx Asy El Ttspmopt 1000 = approx. 1000 liter volume 70 = Low temperature range (-70°C) e = Energy-optimized version 5 = Temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following: The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Specifications may be subject to change or error!) Please feel free to contact us by phone for any further questions.

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021, Psdsy Dd Nqopfx Apmopt operating hours 4748.2 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to examine components and materials under various temperature conditions (e.g., cold, heat, ageing). Designation breakdown: T = Temperature Test Chamber 1000 = approx. 1000-litre volume 70 = Low-temperature range (-70°C) e = Energy-optimised design 5 = Temperature change rate (series) Equipment: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alteration and errors in technical data. Further details available on request!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2021, obratovalne ure: 5.128 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, ageing). Meaning of model designation: T = Temperature test chamber 1000 = approx. 1000 litre volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Pjdpfx Aey Dclwepmspt Equipment: - Stainless steel inner chamber - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important information for buyer safety! The following checks and works are carried out on all chambers we offer before delivery: 1. Functional testing and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Leto izdelave: 2021, obratovalne ure: 5.018 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, Year of manufacture: 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This test chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000-liter capacity 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change speed (series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Observation window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: - Cooling: approx. 6 K/min - Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Ppsdpfey Dclqex Apmet Important safety information for buyers! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Leto izdelave: 2021, obratovalne ure: 5.128 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 5128 h For sale is a used temperature test chamber from Weiss Technik. The chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, aging). Meaning of the designation: T = temperature test chamber 1000 = approx. 1000-liter volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Equipment: - Stainless steel interior - Recirculation air fans Pjdpfxsy Dck Tj Apmopt - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, the following measures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change, errors and omissions excepted!) If you have further questions, we will be happy to answer them by phone.

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4748 h For sale is a used temperature test chamber manufactured by Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Meaning of designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: stainless steel inner chamber recirculation fans touch control panel (WEBSeason) observation window automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Psdpfx Aoy Dciiepmjpt Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: cooling approx. 6 K/min heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data, details may vary!) We are happy to answer further questions by phone.

Leto izdelave: 2020, obratovalne ure: 6.126 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, hours of operation: 6,126 h. Description: For sale is a high-quality climatic test chamber by Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is used for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics testing Ppjdpfx Ajyxm Ulopmst - Environmental and aging tests - Quality and endurance testing The chamber can produce both extremely low temperatures down to approx. -70 °C as well as high temperatures up to +180 °C and change these at a defined rate (temperature ramps). Precise control enables reproducible test conditions. Operation is convenient via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Uniform temperature distribution in the test chamber - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and hour meter available Technical data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to 5 K/min High precision & stability: - Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time - Spatial deviation: ±0.5 to ±1.0 K - Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side ports: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: - R449A (approx. 2.9 kg) - R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical specifications reserved!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-Cooled Two-Chamber Design Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change (heating): 11 K/min Cold Chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change: Heating: 2 K/min Cooling: 3 K/min Pjdpewxc I Uofx Apmopt Test Chamber Volume: 125 liters Temperature Range Hot Chamber: +50°C to +220°C Temperature Range Cold Chamber: -80°C to +70°C Internal Dimensions (W x D x H): 470mm x 650mm x 410mm External Dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port Diameter: ∅ 67mm Power Supply: 3/N/PE AC 400V +10% 50Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452-A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Stanje: rabljeno, Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-Cooled Test Chamber Volume: 335 liters Performance Data for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Rate of Change: Pedpfx Apeuxq T Djmept Cooling: 6.7 K/min Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Values: +23°C and +80°C Performance Data for Climate Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climate Calibration Values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Nominal Power: 10 kW Nominal Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R-404A / R-23 Important Safety Information for Buyers: The following procedures are performed on our offered chambers prior to delivery: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data is subject to change and errors may occur!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VTS 7018-5 Water-Cooled Temperature Test Chamber Unit retrofitted to R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Pjdpfswq Iymjx Apmspt Temperature change rate heating: 7.5 K/min Heat compensation +20°C: 3000 W Heat compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.0 kW, Rated current: 21 A Main fuse (customer side): 32 A, slow-blow Sound pressure level at 1 m distance (free-field measurement):

Stanje: zelo dobro (rabljeno), Here we offer you a Thermotron environmental test chamber. Thermotron Environmental Test Chamber, Water-Cooled Working Volume: 227 liters Temperature Uniformity: All models 0.7°C Temperature Range: -70°C to +180°C Temperature Control Tolerance: All models 0.3°C Shipping Weight: approx. 400 kg Internal Dimensions (W x D x H): 610 mm x 610 mm x 610 mm External Dimensions (W x D x H): 890 mm x 1240 mm x 1850 mm Humidity Range: All models 10% to 98% RH Humidity Control Accuracy: All models 2.5% RH Heating Capacity (minutes, from -65ºC to 71ºC): 17 Heating Capacity (minutes, from -65ºC to 180ºC): 43 Heating Capacity (minutes, from -40ºC to 85ºC): 16 Electrical Requirements at full load (230V/3Ph/60Hz): 19A Electrical Requirements at full load (230V/1Ph/60Hz): 25A Electrical Requirements at full load (220V/1Ph/50Hz): 27A Cooling Capacity (minutes, from 85ºC to -40ºC): 32 Cooling Capacity (minutes, from 71ºC to -65ºC): 54 Cooling Capacity (minutes, from 180ºC to -65ºC): 72 Psdpfomhfr Ijx Apmopt Compressor Size: (2) x 2 Hp Operating Voltage: 400V / 16.7 A Type: SM-8-8200 Condition: used Scope of delivery: (see photo) (Specifications and details are subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Type: VT 7021 Temperature Test Chamber, Air-Cooled 1 Feedthrough, DN 80 mm Test Chamber Volume: 210 liters Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.2 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate Heating: 2.5 K/min Temperature Change Rate Cooling: 2.5 K/min Max. Heat Compensation: 800 W Ppjdpfx Aswylv Dopmst Test Chamber Dimensions: Width 560 mm x Depth 570 mm x Height 630 mm External Dimensions: Width 850 mm x Depth 1250 mm x Height 1640 mm Electrical Connection: 1/NPE AC 230V ± 10% 50Hz Rated Power: approx. 1.8 kW Rated Current: 12 A Refrigerants: R404A and R23 Weight: 355 kg Important Information for Buyers: For your safety, the following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical specifications and information) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation +20°C: 3,000 W Heat compensation -20°C: 3,000 W Pedohh H Hiopfx Apmept Test chamber internal dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.5 kW Rated current: 22 A Fuse (customer side): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69 dB(A) Side cable ports: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Model: VTS 7018-5 For your safety as a buyer, please note the following information! The following work is carried out on all our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Recharge with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: Used Scope of delivery: (See photo) (Specifications subject to change or error!) Should you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Model: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation: 4500 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1280 mm x Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Supply-side fuse: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB(A) Side access ports: 50 cm / 125 cm The chamber is water-cooled Ppjdpsyu Rhgjfx Apmjt Refrigerants: R452A and R23 Weight: approx. 460 kg For your safety as a buyer, please note the following information: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) If you have further questions, we will gladly answer them by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VCS³ 7034-5 Vötsch climate test chamber, water-cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rates: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climatic test: Temperature range: +10°C to +95°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation at the center of the test space: ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climatic range: 2°C / 95% r.h. regulated for max 2 hrs) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side port: 50 mm Side port: 125 mm Operational data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V±10 %, 50 Hz Rated power: 9 kW Rated current: 20 A Required site fuse: 63 A slow-blow Refrigerants: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) Ppjdpfx Asygvn Nspmjt If you have any further questions, we would be happy to answer them by phone.

Stanje: dober (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-cooled Manufacturer: Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Performance for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature gradient: 1 to 4 K - Rate of change: Ppedpfsygur Tox Apmjt * Cooling: 6.7 K/min * Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration points: +23°C and +80°C Performance for Climatic Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test Chamber Dimensions (W x D x H): 580 mm x 765 mm x 750 mm External Dimensions (W x D x H): 870 mm x 1595 mm x 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important Information for Your Safety as a Buyer: The following procedures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data. All information is non-binding!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Test Chamber Volume: 335 liters Performance for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for Climatic Testing: Temperature range: +10°C to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port Ø approx. 50 mm, left side 2 ports Ø approx. 125 mm, left side 1 port Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as the buyer, please note the following: Psdpfxsxufypj Apmopt The following procedures are carried out in advance on all our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 5.0 K/min Temperature change rate heating: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 litres Rated voltage: 3/N/PE AC, 400V ±10%, 50 Hz Rated power: 10 kW, Rated current: 21 A Podpfx Aou H U Twepmjpt Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R 23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers before delivery: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (see image) (Technical specifications, data and information are subject to change and errors.) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance Data for Temperature Tests Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climate Tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Pjdjuudx Djpfx Apmjpt Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and correction!) If you have further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch Temperature Chamber, water-cooled Test chamber volume: 110 liters Internal dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatial: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404A / R 23 Voltage: 1/N/PE AC 230V ±10% 50Hz Nominal power: 1.8 kW Nominal current: 12 A Model: VT 7011 For your assurance as a buyer, please note the following information! Psdpfxehrdy Se Apmopt The following procedures are carried out in advance on all chambers offered: 1. Functional check and replacement of necessary components 2. New charge with legally compliant refrigerant 3. After successful testing, the chambers undergo a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (See picture) (Specifications and technical details are subject to change and errors!) For any further questions, please feel free to contact us by phone.